u blox Malmo 0941 Wireless Communication System Module User Manual
u-blox Malmo AB Wireless Communication System Module
Contents
User Manual
Customer Support: Email: support@mindwaretech.com Phone: (888) 765-9735 WWW.MINDWARETECH.COM Manual Product Manual Impedance Cardiograph Customer Support: Email: support@mindwaretech.com Phone: (614) 626-4888 US Toll Free: (888) 765-9735 Fax: (614) 626-4915 WWW.MINDWARETECH.COM Manual MindWare Mobile Impedance Cardiograph Product Overview Contents Product Overview............................................... p.01 Start-up.............................................................. p.02 Local Mode.................................................. p.02 - 04 Bio-channel Scaling............................................ p.03 WiFi Mode................................................... p.04 - 06 Configuring BioLab............................................. p.06 Other Important Features.................................. p.06 Important Information & Safety.................... p.07-08 01 Start-up: 1. Before use, make sure the device is fully charged using the medical-grade power supply included with your device. From completely discharged, the battery will take 4 hours to fast- charge mostly full and trickle until complete. Status of charge is reflected on screen by the following symbols: Charging Charge Complete 2. To power on the device, click the “Run” 3. Once the device has booted you have the option of two data collection modes, Local and WiFi. The device can also be shutdown by choosing the “Shutdown” tab with the left context button “A”. 4. Select method of data collection by using the arrow keys to move the outline around the Local or WiFi symbol and either clicking the “Run” or right context button “B”, to finalize selection. button Local Mode: Local mode stores data locally on any standard SD card inserted into the device. The device includes an SD card, but any other compatible SD card can also be used (SDHC cards are recommended). Data collected to SD card can be transferred to any computer with MindWare BioLab software installed for analysis. 1. Make sure that a compatible SD card is inserted into the device before attempting to acquire data. It is suggested to check for available space on the card before beginning data collection to assure required space is available. 2. Check device and local mode settings by selecting the “Menu” tab with the right context button “B”. 02 3. On the Main Menu screen, choose either “Acquisition Settings” or “System settings” to view and edit settings. Going back to previous page can be done at any time by selecting the “Back” tab with the left context button “A” 4. The device can also be shut off by selecting “Power Off” with the arrow keys on the Main Menu screen and hitting the “Select” tab. 5. Choose “Acq Settings” to get to the Acquisition Settings screen. 6. Acquisition # is assigned to distinguish data from each other. The device will auto-assign the last three digits to increment with each acquisition. The first four charcters are user-defined by selecting “Acquisition #” and using the arrow keys to adjust the number. When done, save changes with the “Save” tab. 7. Acquisition settings also lists the channels that the device can collect. These channels can be toggled on and off by selecting the channel and using the Left and Right arrow keys to change between on and off. 8. The gain of certain channels can also be edited by choosing the channel and using the Left and Right arrow keys on the “Gain” line found below On/Off option. See Bio-channel scaling table below Gain 1X 2X 3X 4X 6X 8X 12X Norminal Range (V) +/- 2.4 +/- 1.2 +/- 0.8 +/- 0.6 +/- 0.4 +/- 0.3 +/- 0.2 Theoretical Resolution (nV) 286 143 95.4 71.5 47.7 35.8 23.8 Table 1: Bio-Channel Scaling 9. It is important to note that on the right side of the Acquisition Settings screen an up or down arrow indicates that there are more selections not visible on screen but can be reached with the arrow keys. 10. Once settings for acquisition are complete, return to “Main Menu” and select “System Settings” 11. System Settings contains Date & Time Menu as well as the “About” option. 12. On the Date & Time screen, device date and time that will be used in acquisition can be calibrated by using the arrow keys. Once date & time have been calibrated choose “Save” to record changes. 03 13. The “About” screen contains system information such as Model, Firmware, Bootloader, and Serial #. 14. Once Settings have been adjusted return to Local Mode main screen by using the “Back” tab. When on this screen, the “Pre-Acq” tab can be selected to move to the Pre-Acquisition screen. 15. The pre-acquisition screen shows the real time signals that are being read by the device. The channels can be cycled through by using the left and right arrow keys. It is a good Idea to check the signals in the acquisition screen before acquiring data. Note that the “Back” tab can be selected to return to previous screens. 16. Once Pre-Acquisition has been reviewed, data collection can begin by selecting the “Acquire” tab. 17. At this point, data is being recorded to the SD card. Do not remove SD card during acquisition. 16. During Acquisition, controls have been locked. To unlock them hold both the “Left” and “Right” arrow keys simultaneously. 17. When controls are unlocked signals can be viewed. Ending acquisition can be done on this screen by selecting the “Exit” tab. All result will be saved to SD card. WiFi Mode: Wifi Mode allows the Mobile to stream acquisition data wirelessly to BioLab connected to a network. This stores data to computer rather than a SD card. To do this a BioNex must be connected to a computer with BioLab installed and open. See “BioLab Set-up” for more information. 1. Choose Menu from WiFi Mode main screen by selecting it with right context button “B”. 2. This brings you to the Main Menu screen. Here you can change settings and power off the device by using the arrow keys and selection buttons. 04 3. Choose “WiFi Settings” from the Main Menu. 4. On the WiFi Settings screen, available wireless networks are shown. This list can be refreshed by selecting the “Scan Networks...” option and hitting “Run” or right context button “B”. 5. It is important to note that on the right side of the WiFi Settings screen, an up or down arrow indicates that there are more selections not visible on screen but can reached with the arrow keys. 6. Once desired network has been found, select it by pressing “Run” button or right context button “B”. It is important to note that the “Back” tab can be pressed at anytime to return to the previous screen. 7. After selecting a network, that network’s information will be displayed. Check the information and press the right context button “B” to connect. The device will return to the WiFi Mode main screen. Here you can check the network overview that the device is now using. (status will read “Not Connected”) 9. Return to the main menu by selecting the “Menu” tab with the right context button “B” 10. From the Main Menu Screen select “System Settings”. This screen contains “Device Name”, “Date & Time”, as well as the “About” option. 11. Selecting “Device Name” will bring up the option to edit the device name as it appears on the network. Edit by using the arrow keys. To record changes, select the “Save” tab with the right context button “B”. Saving or canceling will return the device to the System Settings screen. 12. The Date & Time screen will bring up the option to edit the date and time that will be recorded by the device. Edit date and time by using the arrow keys. Save changes with the right context button “B”. Saving or canceling will return the device to the System Settings screen. 13. The About screen contains system information such as Model, Firmware, Bootloader, and Serial #. 14. Return to WiFi Mode main screen by using the “Back” tab twice. 15. Select Connect by pressing the left context button “A”. 05 16. This screen shows device name and status of network connection. Status of connection will be “Discovery” until BioLab connects to the device (to unlock buttons and exit to WiFi main screen, hold down “Left and Right” arrow keys then select “End”). 17. Follow the steps bellow to connect BioLab to Device: Configuring BioLab: 1. BioNex device must be connected to computer and powered on. Open BioLab 2. In BioLab Configuration, go to Acquisition Source dropdown menu and choose either Ambulatory Wi-Fi or BioNex & Ambulatory Wi-Fi. 3. When Network Device Detection window appears, click button next to the device name given to that unit. It may take a few minutes for a Mobile unit to be detected. (If device not shown, check network settings on ambulatory) 4. When Channel Setup appears, choose up to 4 channels. 5. Click Connect, then Connect again on Device Detection Window 18. Once BioLab connects to device, the Mobile will leave discovery status and begin Acquisition Mode. 19. The Acquisition Screen means that the device is now reading signals. It is a good idea to preview the signals in BioLab before beginning data collection 21. During Acquisition controls have been locked. To unlock them hold both the “Left” and “Right” arrow keys simultaneously. 22. When controls are unlocked, acquisition can be ended by selecting the “End” tab. However, it is recommended to control the acquisition from BioLab. Other Important features: “Run” button. Incase of an unlikely system freeze, device can be powered off with the First, disconnect the charger then hold down the “Run” button until device screen has visibly shutoff (approximately 12 seconds). Note, this is not a safe alternative to a soft device shutdown found on the “Main Menu” screen. Wire leads are inserted into the marked and color coded Touch Proof Connectors found on the base of the device. During acquisition, controls have been locked to prevent unintended interruption by subject or event. To unlock device, hold both the “Left” and “Right” arrow keys simultaneously. To conserve battery life, the device uses a light sensor that will dim screen when needed Up to 8 Mobile units can be connected to BioLab simultaneously. Each unit can have up to 4 channels of acquisition 06 Important Information FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Within the 5150 to 5250 MHz band (5 GHz radio channels 34 to 48) the device is restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operation. Any changes or modifications NOT explicitly APPROVED by MindWare Technologies could cause the module to cease to comply with FCC rules part 15, and thus void the user’s authority to operate the equipment. IC compliance This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Within the band 5150 - 5250 MHz the operation of this device is restricted to indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Conformité aux normes d’IC Cet appareil est conforme à la(aux) norme(s) RSS sans licence d’Industry Canada. Son utilisation est soumise aux deux conditions suivantes : 1. Cet appareil ne doit pas causer d’interférences et 2. il doit accepter toutes interférences reçues, y compris celles susceptibles d’avoir des effets indésirables sur son fonctionnement. Dans la bande de fréquences 5150 - 5250 MHz, le fonctionnement de cet appareil est limité à une utilisation à l’intérieur pour réduire le potentiel d’interférences brouillant les systèmes satellites mobiles d’un même canal. 07 Safety Warning Regarding Medical and Clinical Use of MindWare Technologies LTD Products. MindWare Technologies LTD products are not designed with components and testing for a level of reliability suitable for use in treatment and diagnosis of humans or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to a human. Applications of MindWare Technologies LTD products involving medical or clinical treatment can create a potential for death or bodily injury caused by product failure, or by errors on the part of the user or application designer. Any use or application of MindWare Technologies LTD products for or involving medical or clinical treatment must be performed by properly trained and qualified medical personnel, and all traditional medical safeguards, equipment, and procedures that are appropriate in the particular situation to prevent serious injury or death should always continue to be used when MindWare Technologies LTD products are being used. MindWare Technologies LTD products are NOT intended to be a substitute for any form of established process, procedure, or equipment used to monitor or safeguard human health and safety in medical or clinical treatment. WWW.MINDWARETECH.COM 1020-F Taylor Station Road Gahanna, OH 43230 (614) 626- 4888 www.mindwaretech.com Copyright 2013 © MindWare Technologies LTD. 08
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2013:06:07 15:33:04-04:00 Creator : Adobe InDesign CS5.5 (7.5.3) Modify Date : 2013:06:07 15:37:52-07:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2013:06:07 15:37:52-07:00 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 8400 bytes, use -b option to extract), (Binary data 10458 bytes, use -b option to extract) Instance ID : uuid:b7a73b57-f99e-4e91-85fb-6bde35ee32f1 Document ID : xmp.did:57CF4F95528AE211B7CD92A17CBCDCCC Original Document ID : xmp.did:57CF4F95528AE211B7CD92A17CBCDCCC Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:57CF4F95528AE211B7CD92A17CBCDCCC, xmp.iid:59CF4F95528AE211B7CD92A17CBCDCCC, xmp.iid:5ACF4F95528AE211B7CD92A17CBCDCCC, xmp.iid:5CCF4F95528AE211B7CD92A17CBCDCCC, xmp.iid:5ECF4F95528AE211B7CD92A17CBCDCCC, xmp.iid:2D19566E658AE211B7CD92A17CBCDCCC, xmp.iid:2E19566E658AE211B7CD92A17CBCDCCC, xmp.iid:3019566E658AE211B7CD92A17CBCDCCC, xmp.iid:3219566E658AE211B7CD92A17CBCDCCC, xmp.iid:3419566E658AE211B7CD92A17CBCDCCC, xmp.iid:3619566E658AE211B7CD92A17CBCDCCC, xmp.iid:6D2F13B66E8AE211B7CD92A17CBCDCCC, xmp.iid:6F2F13B66E8AE211B7CD92A17CBCDCCC, xmp.iid:712F13B66E8AE211B7CD92A17CBCDCCC, xmp.iid:732F13B66E8AE211B7CD92A17CBCDCCC, xmp.iid:752F13B66E8AE211B7CD92A17CBCDCCC, xmp.iid:772F13B66E8AE211B7CD92A17CBCDCCC, xmp.iid:EECEBAAB7F8AE211B7CD92A17CBCDCCC, xmp.iid:F0CEBAAB7F8AE211B7CD92A17CBCDCCC, xmp.iid:F2CEBAAB7F8AE211B7CD92A17CBCDCCC, xmp.iid:F4CEBAAB7F8AE211B7CD92A17CBCDCCC, xmp.iid:F6CEBAAB7F8AE211B7CD92A17CBCDCCC, xmp.iid:5DF780E1868AE211B7CD92A17CBCDCCC, xmp.iid:5FF780E1868AE211B7CD92A17CBCDCCC, xmp.iid:63F780E1868AE211B7CD92A17CBCDCCC, xmp.iid:65F780E1868AE211B7CD92A17CBCDCCC, xmp.iid:67F780E1868AE211B7CD92A17CBCDCCC, xmp.iid:1EF52D128C8AE211B7CD92A17CBCDCCC, xmp.iid:20F52D128C8AE211B7CD92A17CBCDCCC, xmp.iid:22F52D128C8AE211B7CD92A17CBCDCCC, xmp.iid:24F52D128C8AE211B7CD92A17CBCDCCC, xmp.iid:26F52D128C8AE211B7CD92A17CBCDCCC, xmp.iid:27F52D128C8AE211B7CD92A17CBCDCCC, xmp.iid:16ACAF5F2C8BE211B7CD92A17CBCDCCC, xmp.iid:18ACAF5F2C8BE211B7CD92A17CBCDCCC, xmp.iid:1AACAF5F2C8BE211B7CD92A17CBCDCCC, xmp.iid:1CACAF5F2C8BE211B7CD92A17CBCDCCC, xmp.iid:23734CF22F8BE211B7CD92A17CBCDCCC, xmp.iid:25734CF22F8BE211B7CD92A17CBCDCCC, xmp.iid:27734CF22F8BE211B7CD92A17CBCDCCC, xmp.iid:29734CF22F8BE211B7CD92A17CBCDCCC, xmp.iid:2B734CF22F8BE211B7CD92A17CBCDCCC, xmp.iid:2D734CF22F8BE211B7CD92A17CBCDCCC, xmp.iid:94B23B2A368BE211B7CD92A17CBCDCCC, xmp.iid:96B23B2A368BE211B7CD92A17CBCDCCC, xmp.iid:98B23B2A368BE211B7CD92A17CBCDCCC, xmp.iid:9AB23B2A368BE211B7CD92A17CBCDCCC, xmp.iid:9BB23B2A368BE211B7CD92A17CBCDCCC, xmp.iid:9DB23B2A368BE211B7CD92A17CBCDCCC, xmp.iid:F579A3C4DE8BE211B7CD92A17CBCDCCC, xmp.iid:F779A3C4DE8BE211B7CD92A17CBCDCCC, xmp.iid:F979A3C4DE8BE211B7CD92A17CBCDCCC, xmp.iid:FB79A3C4DE8BE211B7CD92A17CBCDCCC, xmp.iid:FD79A3C4DE8BE211B7CD92A17CBCDCCC, xmp.iid:61D7327BE58BE211B7CD92A17CBCDCCC, xmp.iid:63D7327BE58BE211B7CD92A17CBCDCCC, xmp.iid:7F16270DAF8CE21198D19C5FC16D074B, xmp.iid:8116270DAF8CE21198D19C5FC16D074B, xmp.iid:8316270DAF8CE21198D19C5FC16D074B, xmp.iid:8516270DAF8CE21198D19C5FC16D074B, xmp.iid:7D7B87F9F28FE211BFCA86493853C208, xmp.iid:7E7B87F9F28FE211BFCA86493853C208, xmp.iid:E30475F14096E211BDD2A08AE4C9529F, xmp.iid:E60475F14096E211BDD2A08AE4C9529F, xmp.iid:E90475F14096E211BDD2A08AE4C9529F, xmp.iid:C18A2AE24B96E211BDD2A08AE4C9529F, xmp.iid:C48A2AE24B96E211BDD2A08AE4C9529F, xmp.iid:C78A2AE24B96E211BDD2A08AE4C9529F, xmp.iid:CA8A2AE24B96E211BDD2A08AE4C9529F, xmp.iid:E1FD638A5396E211BDD2A08AE4C9529F, xmp.iid:E5FD638A5396E211BDD2A08AE4C9529F, xmp.iid:E6FD638A5396E211BDD2A08AE4C9529F, xmp.iid:E7FD638A5396E211BDD2A08AE4C9529F, xmp.iid:E8FD638A5396E211BDD2A08AE4C9529F, xmp.iid:E9FD638A5396E211BDD2A08AE4C9529F, xmp.iid:E5EF6F305596E211BDD2A08AE4C9529F, xmp.iid:E6EF6F305596E211BDD2A08AE4C9529F, xmp.iid:41A69443A1CFE21190C2DB17B4D6760E, xmp.iid:42A69443A1CFE21190C2DB17B4D6760E, xmp.iid:46A69443A1CFE21190C2DB17B4D6760E, xmp.iid:112BBE27A8CFE21192ECB2DF033DD501, xmp.iid:152BBE27A8CFE21192ECB2DF033DD501 History When : 2013:03:11 09:50:39-04:00, 2013:03:11 10:33:44-04:00, 2013:03:11 10:33:44-04:00, 2013:03:11 10:46:55-04:00, 2013:03:11 11:49:31-04:00, 2013:03:11 12:05:02-04:00, 2013:03:11 12:31:46-04:00, 2013:03:11 12:48:13-04:00, 2013:03:11 12:52:23-04:00, 2013:03:11 12:57:05-04:00, 2013:03:11 13:08:44-04:00, 2013:03:11 13:11:28-04:00, 2013:03:11 13:13:13-04:00, 2013:03:11 13:32:57-04:00, 2013:03:11 13:35:37-04:00, 2013:03:11 14:17:11-04:00, 2013:03:11 14:35:56-04:00, 2013:03:11 15:12:52-04:00, 2013:03:11 15:26:37-04:00, 2013:03:11 15:39:55-04:00, 2013:03:11 15:45:56-04:00, 2013:03:11 15:51:44-04:00, 2013:03:11 16:04:28-04:00, 2013:03:11 16:10:58-04:00, 2013:03:11 16:28:34-04:00, 2013:03:11 16:31:53-04:00, 2013:03:11 16:34:25-04:00, 2013:03:11 16:41:37-04:00, 2013:03:11 16:49:29-04:00, 2013:03:11 16:55:26-04:00, 2013:03:11 17:07:18-04:00, 2013:03:11 17:08:46-04:00, 2013:03:12 11:19:17-04:00, 2013:03:12 11:57:18-04:00, 2013:03:12 11:59:15-04:00, 2013:03:12 12:02:24-04:00, 2013:03:12 12:06:14-04:00, 2013:03:12 12:14:41-04:00, 2013:03:12 12:19:16-04:00, 2013:03:12 12:21:57-04:00, 2013:03:12 12:26:28-04:00, 2013:03:12 12:43:26-04:00, 2013:03:12 12:47:19-04:00, 2013:03:12 12:59:12-04:00, 2013:03:12 13:36:44-04:00, 2013:03:12 13:40:38-04:00, 2013:03:12 13:41:01-04:00, 2013:03:12 14:15:52-04:00, 2013:03:13 08:50:28-04:00, 2013:03:13 09:06:07-04:00, 2013:03:13 09:19:50-04:00, 2013:03:13 09:20:18-04:00, 2013:03:13 09:30:23-04:00, 2013:03:13 09:45:17-04:00, 2013:03:13 09:54:10-04:00, 2013:03:13 10:45:36-04:00, 2013:03:14 09:57:04-04:00, 2013:03:14 10:06:23-04:00, 2013:03:14 10:25:55-04:00, 2013:03:14 10:27:04-04:00, 2013:03:18 13:45:20-04:00, 2013:03:18 13:45:20-04:00, 2013:03:26 14:14:04-04:00, 2013:03:26 14:26:54-04:00, 2013:03:26 15:26:02-04:00, 2013:03:26 15:32:23-04:00, 2013:03:26 15:35:04-04:00, 2013:03:26 15:36:38-04:00, 2013:03:26 15:38-04:00, 2013:03:26 16:27:12-04:00, 2013:03:26 16:28:11-04:00, 2013:03:26 16:33:31-04:00, 2013:03:26 16:33:31-04:00, 2013:03:26 16:37:12-04:00, 2013:03:26 16:38:03-04:00, 2013:03:26 16:39-04:00, 2013:03:26 16:43:54-04:00, 2013:06:07 14:37:10-04:00, 2013:06:07 14:37:10-04:00, 2013:06:07 14:38:52-04:00, 2013:06:07 15:26:30-04:00, 2013:06:07 15:32:43-04:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata Doc Change Count : 15041 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 9EXIF Metadata provided by EXIF.tools