Inkel DSN10 Docking System (Bluetooth) User Manual DS N10 indb
Inkel Corporation Docking System (Bluetooth) DS N10 indb
Inkel >
Contents
- 1. User manual -1
- 2. User manual -2
- 3. user manual -3
User manual -1
DS-N10A
• Wireless Music Streaming Via Bluetooth
• Free Sherwood Smart Audio Application
• Stylish and Exquisite Design
• Docks with AndroidTM Phone
• 6W x 2Ch Powerful Output
• Crystal Clear Stereo Sound
The printed image can be di erent from the real unit.
WIRELESS STREAMING
DOCKING SYSTEM
USER GUIDE
2
Table of contents
2
Safety precautions 3
Features 5
Components 5
Overview 6
Main unit 6
Application 8
Remote control 9
Operation 10
Turning on power 10
Installing the antenna 10
Installing the application 10
Pairing the application and the main unit through
Bluetooth 10
Using the system 11
Charging devices 11
Preparing music files 12
Main menu 13
Listening to music - Smartphone, USB 14
Listening to music - Aux In 15
Listening to music - FM radio 16
Setting sound effects 17
Setting 18
Clock 18
Alarm 19
Auto Power Down (A.P.D) 21
Info 21
Sleep mode 21
Troubleshooting Guide 22
Specifications 23
3
Safety precautions
Safety information
• Keep these instructions.
• Clean only with dry cloth.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
• Unplug the unit during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the unit has been damaged in any way, such as
power-supply cord is damaged, liquid has been spilled or objects
have fallen into the unit, the unit has been exposed to rain or
moisture, does not operate normally, or has been dropped.
FCC information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications in construction of this device
which are not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003. (Cet
appareil numérique de la Classe B est conforme à la norme NMB-003 du
Canada.)
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits
set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 cm between the
radiator and your body.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator
and your body.
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
Product Name: WIRELESS STREAMING DOCKING SYSTEM
Model Number: DS-N10A
Responsible Party Name: Inkel Corporation
Address: 3-8, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea, 403-853
Phone: 82-32-650-6000
URL: http://www.inkel.co.kr
4
Safety precautions
CAUTION
• The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed
on the unit.
• The unit shall not be exposed to dripping or splashing for use.
• No objects filled with liquids, such as vases, shall be placed on the
unit.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Notes on the AC power cord and the wall outlet
• The unit is not disconnected from the AC power source (mains) as
long as it is connected to the wall outlet, even if the unit has been
turned off.
• To completely disconnect this product from the mains, disconnect
the plug from the wall socket outlet.
• When setting up this product, make sure that the AC outlet you are
using is easily accessible.
• Disconnect the plug from the wall outlet when not using the unit for
long periods of time.
5
Features
Components
You can enjoy the following features:
• Wireless Music Streaming Via Bluetooth
• Free Sherwood Smart Audio Application
• Stylish and Exquisite Design
• Docks with AndroidTM Phone
• 6W x 2Ch Powerful Output
• Crystal Clear Stereo Sound
Main unit
Adapter
User Guide Warranty
Remote Control
FM Radio Antenna
User Guide
Warranty
MUTE ON/STANDBY
ALARM
SLEEP
CLOCK
VOLUME INPUT SELECT
PRESET-
TUNE+
TUNE- PRESET+
Note
The shape of the adapter might vary depending on the region where you
live.
Note
• Contents of the user guide might change without notice.
• Warranty might be provided depending on the region where you live.
6
Overview
Main unit
Front Rear
No. Name Description
1Docking
connector
Connects AndroidTM smartphone; charges
battery of the docked smartphone
2LED display Displays system information
3ON/STANDBY
button
Turns on the main unit if pressed shortly, displays
time if pressed shortly when the main unit is on
4
Volume button
Increases or decreases the volume
5FUNC button Changes function: Bluetooth Streaming, USB,
FM, AUX IN
6Speaker Stereo speaker units built-in
No. Name Description
1DC IN terminal Connects the power cable
23.5 mm mini cable
terminal Connects the AUX cable
3FM antenna Connects the FM radio antenna
4USB port Connects the USB flash drive
5Stand Holds up the smartphone
1
2
3
6
4
5
1234
5
7
LED Display
12345
6
No. Name Description
1AM/PM Indicates AM or PM
2Alarm Indicates the alarm status (on/off)
3Sleep mode Indicates the sleep mode (on/off)
4Bluetooth
Displays paired status through Bluetooth
Light blinks when not paired with the application through Bluetooth
Light is on when paired with the application through Bluetooth
5STANDBY (Power save) Indicates the standby status (Power save)
6System information Displays the relevant information
Overview
8
No. Name Description
1Bluetooth
Streaming
Plays files saved in the AndroidTM smartphone
through Bluetooth
2Mute Mutes the sound
3USB Host Plays files saved in the USB flash drive
4Volume Decreases or increases the volume
5FM Turns on FM radio
6AUX in Plays files saved in the portable music player
No. Name Description
7SETTING Synchronizes Clock, adjusts Alarm, sets Auto
Power Down and checks Information
8Sleep Sets time for the sleep mode in minutes
(120/90/60/45/30/15/Off)
9Alarm Turns on/off the alarm
10
ON/STANDBY
Sets the main unit to the standby mode (Clock
mode)
Overview
Application
123
10 9
4
8
6
5
7
Main screen (Landscape)
Main screen (Portrait)
9
MUTE ON/STANDBY
ALARM
SLEEP
CLOCK
VOLUME INPUT SELECT
EQ1 EQ2
SHUFFLE
DIMMER
FLAT
REPEAT
3D
SOUND
PRESET-
TUNE+
TUNE- PRESET+
Overview
Remote control
1
2
3
4
5
6
8
11
10
9
No. Name Description
1ON/STANDBY Turns on/off the main unit
2INPUT SELECT Selects input device
3
TUNE
Searches for FM radio channels
PRESET
Goes to the preset FM radio channel
(FM radio); fast-forwards or rewinds the
current file (USB, Bluetooth)
4CLOCK Shows the current time
5ALARM Turns on/off the alarm
6SLEEP
Adjusts sleep time (120/90/60/45/30/15/Off)
7REPEAT, SHUFFLE Repeats or shuffles music files
8DIMMER Adjusts brightness of the LED display in
three steps
93D SOUND, FLAT,
EQ1, EQ2 Turns on/off preset sound effect
10 VOLUME Increases or decreases the volume
11 MUTE Mutes the sound
7
10
Turning on power
1Connect one end of the power adapter to DC 12V on the
rear side of the main unit.
2Connect the power plug to the AC wall socket.
3Press on the system to turn on the main unit. Or press
on the remote control to turn on power.
Note
Do not use any AC adapter other than the one included with this unit.
Installing the antenna
1Connect the radio antenna into FM antenna terminal.
2Connect the other end of the radio antenna to outdoor
FM radio antenna.
3Place the radio antenna where FM signal is strong.
Installing the application
1Visit Play StoreTM on your AndroidTM Smartphone.
2Search for DS-N10.
3Download and install the application on your AndroidTM
smartphone.
Pairing the application and the main unit
through Bluetooth
1Go to Wireless & networks settings in your AndroidTM
smartphone.
2Go to Bluetooth settings.
3Search for and select DS-N10.
4Enter 0000 for PIN.
5Run the application.
Note
The application might not work in some AndroidTM smartphones
depending on speci cations, e.g. AndroidTM OS version.
Operation
11
Smartphone
1Connect your smartphone into the docking connector.
It is recommended that you use the AndroidTM
smartphone that has a micro USB port. Make sure that
the micro USB port faces downwards. Otherwise, your
AndroidTM smartphone may not be charged. Some
devices might not be charged.
Using the system
Charging devices
Note
Protective case for the smartphone may keep the battery from being
charged.
12
Using the system
Preparing music files
Smartphone
1Pair your smartphone with the main unit via Bluetooth.
2Turn on the application and tap Bluetooth Streaming to
play preferred music files.
USB flash drive
1Insert the USB flash drive to the USB port.
2Turn on the application and tap USB Host to play
preferred music files.
Note
• Supported le formats include MP3 and WMA.
• After playing music from the USB ash drive, remove the USB ash
drive in the stop mode or the standby mode.
Portable music player
1Plug one end of the 3.5 mm stereo cable into AUX IN
port of the main unit.
2Connect the other end of the cable to the external
sound system.
13
Application
1Run the application on your AndroidTM smartphone.
2Tap ON/STANDBY in the main screen.
3Tap Bluetooth Streaming, USB Host, AUX in, or FM.
Remote control
1Press to turn on the main unit.
2Press or under INPUT SELECT and select
Bluetooth Streaming, USB, FM or Aux In.
3Press to play or pause the current song.
4Press or to move to the previous or next song.
Using the system
Main menu
14
Application
Music Player for Bluetooth Streaming and USB Host
1Run the application on your AndroidTM smartphone.
2Tap Bluetooth Streaming, or USB Host.
• To select a song in the list, tap and tap a song.
• Tap or
to listen to the previous or next song.
• Tap on the screen to pause the playing song. Tap on
the screen again to resume the song.
Remote control
1Press to turn on the main unit.
2Press or under INPUT SELECT and select
Bluetooth Streaming or USB.
3Press to play or pause the current song.
4
Press or to move to the previous or next song.
5Press or to adjust the volume.
Main unit
1Press to turn on the main unit.
2Press the FUNC button to change sound source and
set to Bluetooth Streaming or USB. Music will play as
you change sound source.
3Press + or - to adjust the volume.
4Press the FUNC button for three seconds and press - or
+ to move to the previous or next song. After a few
seconds, you can adjust the volume by pressing + or -.
Using the system
Listening to music - Smartphone, USB
15
Application
Note
Connect the device to Aux In jack on the rear side of the unit before
use.
1Run the application on your AndroidTM smartphone.
2Tap AUX In.
3Tap and adjust sound effects for your preference.
Remote control
1Press to turn on the main unit.
2Press or under INPUT SELECT and select AUX in.
3Press the 3D SOUND, FLAT, EQ1, or EQ2 button for your
preference.
4Press or to adjust the volume.
Main unit
1Press to turn on the main unit.
2Press the FUNC button to change sound source and
set to AUX in. Music will play as you change sound
source.
3Press + or - to adjust the volume.
Using the system
Listening to music - Aux In
16
Application
1Run the application on your AndroidTM smartphone.
2Tap FM in the main screen.
3
Tap or to tune to your favored radio frequency. Or
drag or to search for channels. When a channel is
found, the frequency stops changing.
4Drag the frequency to the bar on the bottom of the
screen to assign the frequency to your preferred
channel. You can assign up to 18 channels. Tap FM1 and
select another to tune to the preset channel.
5Tap ST to change sound system. Select ST for stereo or
MONO for mono.
Remote control
1Press to turn on the main unit.
2Press or under INPUT SELECT and select FM.
3Press or to move to the previous or next
preset channel.
4Press or to select the channel manually.
5Press or to adjust the volume.
Main unit
1Press to turn on the main unit.
2Press the FUNC button to change sound source and
set to FM.
3Press the FUNC button for three seconds and press -
or + to move to the previous or next preset channel.
After a few seconds, you can adjust the volume by
pressing + or -.
Using the system
Listening to music - FM radio
17
Application
Sound effects in Bluetooth Streaming, USB and AUX in
1Turn on your AndroidTM smartphone and run the
application.
2Tap on the top right side of the screen while you
listen to music through Bluetooth Streaming, USB host,
or AUX in.
3Tap the sound setting for your preference.
• Tap USER EQ and adjust sound settings for EQ1
and EQ2. To adjust EQ1 or EQ2 setting, tap EQ1 or
EQ2, adjust setting and tap SAVE. To reset current
settings, tap RESET.
• Tap EQ1 or EQ2 to listen to music in the preset sound
settings that you adjust in USER EQ.
• Tap 3D SOUND to listen to music in 3D sound.
• Tap FLAT to listen to music with no change to the
current sound setting.
• Tap Play to change the playing option. It is not
available if music is being played from a portable
music player.
Remote control
1Press to turn on the main unit.
2Press the 3D SOUND, FLAT, EQ1, or EQ2 button for your
preference.
3Press the repeat or shuffle button for your preference.
Using the system
Setting sound effects
18
Application
1Turn on your AndroidTM smartphone and run the
application.
2Tap SETTING in the main screen and tap Clock. Time in
sync with your AndroidTM smartphone is displayed. Time
is set to the same with that of the main unit.
Main unit
1Press to turn on the main unit.
2Press the CLOCK button of the remote control. Time of
the main unit is displayed for a few seconds.
Setting
Clock
19
Application
1Turn on your AndroidTM smartphone and run the
application.
2Tap SETTING in the main screen and tap Alarm.
Setting
Alarm
3Tap or to adjust time for alarm and tap to
assign a weekday or tap Once.
4Tap and tap Next.
20
Setting
5Select the sound source for alarm and tap Next.6Adjust the volume for alarm, tap ON or OFF next to
Alarm button, and tap Save. The alarm of the main unit
will work as you set.
Note
Alarm works only when you set the main unit to the standby mode
(Clock Mode).
21
Application
1Tap SETTING in the main screen and tap A.P.D.
2Tap or to select one of the following options
for the Auto Power Down.
• Off: The Auto Power Down function will not work.
• Clock Mode: When there is no input into the main
unit for two hours, the main unit turns to the clock
mode. Pairing with the application through Bluetooth
is maintained.
• Power Save Mode: When there is no input into the
main unit for two hours, the main unit turns to the
Power Save mode.
Info
Application
1Tap SETTING in the main screen and tap Info. Model
name and the application version are displayed on the
screen.
Application
1Tap Sleep in the main screen. Sleep time changes from
15 minutes to 120 minutes.
Remote Control
1Press the SLEEP button of the remote control. When you
press the button, time changes from 15 to 120.
Setting
Auto Power Down (A.P.D) Sleep mode
22
Troubleshooting Guide
If a fault occurs, run through the table below before taking your unit for repair. If the fault persists, attempt to solve it by switching the unit o and on
again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void
the warranty.
Symptom Possible cause Remedy
No power The power adapter is disconnected. Connect cord securely.
Poor connection at AC wall socket is dead or off. Check the outlet using a lamp or another appliance.
No sound
The master volume is adjusted too low. Adjust the master volume.
The MUTE button is press to “ON.” Press the MUTE button to cancel the muting effect.
Incorrect selection of input source. Select the desired input source correctly.
Incorrect connections between the components. Make connections correctly.
Poor FM reception No antenna is connected. Connect an antenna.
The antenna is not positioned for the best reception. Change the position of the antenna.
Remote control does not
operate.
Batteries are not inserted or exhausted. Replace the batteries.
The remote sensor is obstructed. Remove the obstacle.
Cannot operate with the
application and no sound via
Bluetooth connection.
Pairing failed between your smartphone and DS-N10A. Check the pairing status in your smartphone’s setting
menu.
23
Specifications
AMPLIFIER SECTION
• Rated output: 10 W + 10 W (1 kHz, 6Ω, THD 10%)
• Signal-to-Noise ratio: >78dB (IHF-A weighted, 20kHz LPF)
• Input sensitivity
AUX: 280mV
SPEAKER SECTION
• Enclosure: Bass Reflex Type
• Speakers: 80 mm cone type
• Impedance: 6Ω
• Maximum input: 20 W
FM TUNER SECTION
Receiving range: 87.5MHz - 108.0 MHz
S/N (Mono/Stereo): >75 dB / >70 dB
Bluetooth
Model name: BTM0605C4NA
Bluetooth system: v2.0 + EDR Compliant
Class 2 support
Out power: -6-5 dBm
Frequency Range: 2402-2480 MHz
GENERAL
• Power supply: AC100-240V, 50/60 Hz (DC 12V)
• Power consumption: AC 20 W (DC 15 W)
• Standby power consumption: 1 W or less
• Max Dimensions (WxHxD): 320 x 212.2 x 95.5 mm
• Weight: 1.95 kg (Net)
Note
• Design and specifications are subject to change without notice for
improvements.
Legal notice
Play Store is a trademark of Google Inc.
AndroidTM is a trademark of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Sherwood is under
license. Other trademarks and trade names are those of their respective
owners.
DS-N10A
WIRELESS STREAMING DOCKING SYSTEM
DS-N10A
• Diffusion de musique sans fil par liaison Bluetooth
• Application audio intelligente Sherwood gratuite
• Conception élégante et recherchée
• Stations d'accueil pour téléphone AndroidTM
• Puissance de sortie de 6 W x 2 voies
• Son stéréo net comme du cristal
L'image imprimée peut être di érente de l'appareil réel.
SYSTÈME DE STATION D'ACCUEIL
À DIFFUSION SANS FIL
GUIDE DE L'UTILISATEUR
26
Table des matières
26
Mesures de sécurité 27
Caractéristiques 29
Composants 29
Présentation 30
Unité principale 30
Application 32
Télécommande 33
Opération 34
Alimenter l'appareil 34
Installer l'antenne 34
Installer l'application 34
Associer l'application et l'unité principale par liaison
Bluetooth 34
Utiliserle système 35
Charger des dispositifs 35
Préparer les fichiers de musique 36
Menu principal 37
Écouter de la musique –
Téléphone intelligent, USB 38
Écouter de la musique – Entrée Auxiliaire (Aux In) 39
Écouter de la musique - Radio FM 40
Régler les effets sonores 41
Réglage 42
Horloge 42
Réveil 43
Arrêt automatique (Auto Power Down) (A.P.D) 45
Information 45
Mode Veille (Sleep) 45
Guide de dépannage 46
Spécifications 47
27
Mesures de sécurité
Information de sécurité
• Conservez ces instructions.
• Nettoyez uniquement avec un chiffon sec.
• Ne pas installer près de sources de chaleur comme des radiateurs,
des volets de chaleur, un poêle ou tout autre appareil (y compris des
amplificateurs) qui produit de la chaleur.
• Débrancher l'appareil lors des orages ou lors d'une inutilisation
prolongée.
• Confiez toute réparation à un personnel de réparation qualifié.
Une réparation est nécessaire quand l'unité a été endommagée de
n'importe quelle manière, comme lorsque le cordon d'alimentation
est en mauvais état, un liquide a été renversé ou des objets sont
tombés à l'intérieur de l'unité, lorsque l'unité a été exposée à la pluie
ou à de l'humidité, lorsqu'elle ne fonctionne pas normalement ou
lorsqu'elle est tombée.
Réglementation FCC
Cet équipement a été testé et est conforme avec les limites des appareils
numériques de classe B, en vertu de l'article 15 de la réglementation
FCC. Ces limites sont définies pour fournir une protection raisonnable
contre les interférences nuisibles dans une installation résidentielle. Cet
équipement génère, utilise et émet de l'énergie de fréquences radio et
peut, en cas d'installation ou d'utilisation non conforme aux instructions,
engendrer des interférences nuisibles aux communications radio. Rien
ne permet de garantir que ces interférences se produiront à un moment
quelconque. Si cet équipement cause des interférences nuisibles à la
réception radio ou télévisée, ce qui peut être déterminé en éteignant
et rallumant l'équipement, l'utilisateur est encouragé à éliminer les
interférences au moyen de l'une ou de plusieurs des mesures suivantes:
• Réorienter ou déplacer l'antenne de réception.
• Accroître la distance entre l'équipement et le récepteur.
• Brancher l'équipement sur la prise secteur d'un circuit différent de
celui auquel le récepteur est relié.
• Consulter le revendeur ou un technicien radio/télévision qualifié
pour toute assistance.
Attention: Tout changement ou modification dans la conception
de cet appareil non expressément approuvés par le responsable
d'application de la conformité peuvent annuler vos droits d'utiliser cet
équipement.
Cet appareil numérique de classe B est conforme à la norme ICES-003
du Canada. (Cet appareil numérique de Classe B est conforme à la
norme NMB-003 du Canada.)
Cet appareil est conforme à l'article 15 de la réglementation FCC. Le
fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer des interférences nuisibles, et
(2) Cet appareil doit accepter toute autre interférence reçue, y compris
les interférences susceptibles d'entraîner un fonctionnement non
désiré.
Déclaration IC d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux radiations
RSS-102 de l'IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance minimum de
20 cm entre le radiateur et votre corps.
Déclaration FCC sur l'exposition aux radiations
Cet équipement est conforme avec les limites d'exposition aux
radiations prévues par la réglementation FCC pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec une
distance minimum de 20 cm entre le radiateur et votre corps.
28
Mesures de sécurité
Cet émetteur ne doit pas être situé à proximité ou fonctionner avec une
autre antenne ou émetteur.
Nom du produit: SYSTÈME DE STATION D'ACCUEIL À DIFFUSION SANS
FIL
Numéro de modèle: DS-N10A
Nom de la partie responsable: Inkel Corporation
Adresse: 3-8, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Corée, 403-853
Téléphone: 82-32-650-6000
Adresse web: http://www.inkel.co.kr
ATTENTION
• Il ne faut pas entraver le système de ventilation : ne recouvrez pas
les ouvertures d'aération d'articles tels que des journaux, une nappe,
des rideaux, etc.
• Ne placez jamais une source de flamme vive, telle qu'une bougie
allumée, sur l'appareil.
• Protégez l’appareil des gouttes ou éclaboussures lorsqu’il est en
marche.
• Ne posez pas d’objets remplis de liquides, tels qu’un vase, sur
l’appareil.
AVERTISSEMENT: POUR RÉDUIRE LE RISQUE D'INCENDIE OU DE
DÉCHARGE ÉLECTRIQUE, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU
À DE L'HUMIDITÉ.
Remarques concernant le câble d’alimentation et la prise murale
• L'unité n'est pas déconnectée de la source d'alimentation AC
(secteur) tant qu'elle est connectée par la prise murale, même si
l'unité est éteinte.
• Pour mettre l’appareil complètement hors tension, débranchez la
fiche de la prise murale.
• Lors de la mise en place de l’appareil, veillez à ce que la prise secteur
soit facilement accessible.
• Débranchez la fiche de la prise murale si vous n’avez pas l’intention
d'utiliser l'appareil pendant longtemps.
29
Caractéristiques
Composants
Vous bénéficiez des caractéristiques suivantes:
• Diffusion de musique sans fil par liaison Bluetooth
• Application audio intelligente Sherwood gratuite
• Conception élégante et recherchée
• Stations d'accueil pour téléphone AndroidTM
• Puissance de sortie de 6 W x 2 voies
• Son stéréo net comme du cristal
Unité principale
Adaptateur
Guide de l'utilisateur Garantie
Télécommande
Antenne radio FM
User Guide
Warranty
MUTE ON/STANDBY
ALARM
SLEEP
CLOCK
VOLUME INPUT SELECT
PRESET-
TUNE+
TUNE- PRESET+
Remarque
La forme de l'adaptateur peut varier en fonction de la localité où vous
vivez.
Remarque
• Le contenu du guide de l'utilisateur est susceptible de changer sans
préavis.
• La garantie peut s'appliquer en fonction de la localité où vous vivez.
30
Présentation
Unité principale
Face avant Face arrière
No. Nom Description
1
Connecteur de la
station d'accueil
Connecte le téléphone intelligent Android
TM
; charge
la batterie du téléphone intelligent arrimé
2
Afficheur à diodes
lumineuses Affiche les informations système
3
Bouton ON/
MISE EN VEILLE
(STANDBY)
Allume l'unité principale si appuyé brièvement,
affiche l'heure si appuyé brièvement quand l'unité
principale est allumée
4
Bouton de volume Augmente ou diminue le volume
5
Bouton FONCTION
(FUNC)
Change de fonction: Diffusion par Bluetooth, USB,
FM, Entrée Auxiliaire (AUX IN)
6
Enceinte Unités d'enceinte stéréo intégrée
No. Nom Description
1
Prise d'entrée
d'alimentation (DC IN) Pour brancher le câble d'alimentation
2
Mini-prise de câble de
3,5 mm Pour brancher le câble AUX
3
Antenne FM Pour brancher l'antenne radio FM
4
Port USB Pour brancher un lecteur de mémoire flash
USB
5
Support Retient le téléphone intelligent
1
2
3
6
4
5
1234
5