Acrodyne NW8201E DIGITAL TELEVISION BROADCAST TRANSMITTER User Manual 32 NV8202 26 04 06 01 00

Download:
Mirror Download [FCC.gov]
Document ID	864560
Application ID	vnwefxrVtvE1edbLlVsrmQ==
Document Description	Users Manual Part 8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.3kB (1666312 bits)
Date Submitted	2007-11-06 00:00:00
Date Available	2008-01-18 00:00:00
Creation Date	2007-11-02 12:22:20
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2007-11-02 12:22:38
Document Title	32 NV8202-26.04.06-01.00.book
Document Creator	FrameMaker 7.0
Document Author:	HUPFAUER

Chapter 2
1.6
Design and Characteristics
Test Lightning Protection System
Fig. 25 Equipment in the test lightning protection system
1)
2)
3)
4)
Lightning protection
Directional coupler N
Directional coupler SMA
Directional coupler and rectifier unit
The test lightning protection system (lightning protection combined with test points) is located at the output of the harmonics filter and contains the following components:
 Lightning protection
 Directional coupler N
 Directional coupler SMA (option ADE only)
 Directional coupler and rectifier unit
1.6.1
Lightning Protection
The lightning protection protects the rack from possible damage due to lightning bolts.
2099.9595.72
- 2.21 -
E-2
Chapter 2
1.6.2
Design and Characteristics
Directional Coupler
Fig. 26 Directional coupler
The forward and reflected power are detected at the transmitter output by means of the frequency-compensated directional couplers P14A (forward) and P14B (reflected). The frequency-compensated directional couplers send a power-proportional DC voltage to the
NETCCU® transmitter control unit via the integrated rectifier circuit. The DC voltages for the
forward and reflected values are displayed in the NETCCU® and also used as an S-measurement for VSWR monitoring (reflection antenna).
Directional coupler P14C is an unassigned test point that can be used either as a forward
or reflected power test point.
The P14D rectifier is used in the digital TV transmitter in connection with option ADE only.
Note
2099.9595.72
The transmitter is switched off because of reflection if the reflected value exceeds 2% of the
forward value after being checked three times.
- 2.22 -
E-2
Chapter 2
1.6.3
Design and Characteristics
Test Interface
Fig. 27 Test interface
External power measurement equipment can be connected at the unused test interface.
1.7
Harmonics Filter
Fig. 28 Harmonics filter
2099.9595.72
- 2.23 -
E-2
Chapter 2
Design and Characteristics
Harmonics filter FM 825 suppresses harmonics. It is set up as a Chebyschev filter of the
11th order using coaxial design for the 13-30 line system. In the signal path, the harmonics
filter is located directly after the combiner.
Note
The harmonics filter is lacquered in order to reduce the surface temperature, but high temperatures are nevertheless to be expected.
1.8
RF Connector
Fig. 29 RF connector
The RF connector (1 5/8“ EIA flange) is located on the transmitter roof (or under it if preferred).
2099.9595.72
- 2.24 -
E-2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:11:02 12:22:38-04:00
Create Date                     : 2007:11:02 12:22:20-04:00
Title                           : 32 NV8202-26.04.06-01.00.book
Author                          : HUPFAUER
Creator                         : FrameMaker 7.0
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Page Count                      : 4
Mod Date                        : 2007:11:02 12:22:38-04:00
Creation Date                   : 2007:11:02 12:22:20-04:00
Metadata Date                   : 2007:11:02 12:22:38-04:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools