Advanced RF Technologies ADRFTECH003 Epoch- M1P Repeater User Manual M100 QuickStart
Advanced RF Technologies, Inc. Epoch- M1P Repeater M100 QuickStart
Contents
- 1. Users Manual
- 2. QickStart Guide
- 3. Software Setup Guide
- 4. USB Driver Setup Guide
QickStart Guide
Advanced RF Technologies M1P Quick Start Guide SERVER DONOR DONOR SERVER TOP VIEW Quick Install Guide FRONT VIEW REPEATER PLACEMENT CONNECT USB, POWER CABLES, AND POWER ON INSTALL AND RUN SOFTWARE CONNECT ANTENNAS/CABLES SELECT OPERATING BAND(S) Documentation and Software can be found on the CD-ROM included in the M1P box. Technical Support Contact ADRF’s Technical Support Team for assistance with: -Software Questions -Setting up the M1P -M1P Operation -Troubleshooting Questions USA: 1-323-254-8131 www.adrftech.com MODEM SETUP CHECK SIGNAL LEVELS Advanced RF Technologies M1P Quick Start Guide OPEN THE BOX The box should contain: Epoch-M1P Repeater CD (Software and User Guide) USB Cable AC/DC Power Adapter Quick Install Guide Sheet USB/POWER Connect the USB cable to your computer and the M1P. Plug in the power converter. (110VAC) REPEATER PLACEMENT Locate the place where you will put the M1P. You can hang the M1P or put it on anything. In any case, make sure the M1P is securely fastened to a wall or any structure so that it won’t move. DRIVER/SOFTWARE Use the CD-ROM (included in the M1P box) to install the drivers when the New Hardware Wizard comes up. This will ensure that the M1P communicates properly with the software. Turn on the M1P. Next, install the software from the CD. After installation, launch the software. MODEM Set-up *If the M1P does not have a modem inside, proceed to step 8. Make sure the AUTO CONNECTION box is checked. Enter the Site ID and Manager IP information provided by the carrier. Click SET button and, finally, click “INSTALL” button. When installation is complete, you will get a confirmation message. Go to STATUS menu and verify input/output power, gains, etc. Please make sure that there are no ALARMS generated. POST SURVEY Congratulations! The M1P has been successfully installed and is ready for use. ANTENNA CONNECTION Connect the donor/server antenna cables to the M1P’s antenna ports on top as shown in figure 3. Adjust antenna positioning to assure maximum coverage. BAND SELECTION Go to INSTALL menu on the top of the GUI. On the top of the window, click the 5/10/15MHz BAND SELECTION button. Click the center frequency on the pop-up window and click OKAY. Double check the SELECTED BAND information. Documentation and Software can be found on the CD-ROM included in the M1P box. Technical Support Contact ADRF’s Technical Support Team for assistance with: -Software Questions -Setting up the M1P It is recommended to do a walk-through inside of the building and make live phone calls to verify RF coverage. -M1P Operation -Troubleshooting Questions USA: 1-323-254-8131 www.adrftech.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2006:03:06 14:25:29-08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2006:03:06 14:25:29-08:00 Format : application/pdf Title : M100 QuickStart.cdr Creator : James Document ID : uuid:3a755896-2993-4829-b972-0ff199cd6f1e Instance ID : uuid:797066d0-c71c-44e2-8593-035c30f40fdc Page Count : 2 Author : JamesEXIF Metadata provided by EXIF.tools