Alcatel Canada 24T28A01D22C 7390 24 GHz Co-Pol RBS User Manual BS Manual pages 247 to 276

Alcatel Canada Inc 7390 24 GHz Co-Pol RBS BS Manual pages 247 to 276

BS Manual pages 247 to 276

3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 247/302252Appendix 1 – Installation sheetA.1.1 – 7390DBSGeneral information:Operator................. Date.......... Visa..........Equipment characteristicsNameAddress........................................................................................No ......... Street......................................................Bld......... Stair................... Floor.................Town .............................................................Country .........................................................OperatorSite identificationName of Base StationVersionDesignation Reference ICS Serial No.SubrackFanPSU 1PSU 2CPLIBS 1IBS 2IBS 3IBS 4IBS 5IBS 6IBS 7IBS 8
248/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01252Equipment characteristics and onboard softwareDesignation Part number ICS Serial No. Downloaded softwareANT 1ANT 2TNT 1TNT 2TNT 3TNT 4AMD 1AMD 2AMD 3AMD 4AMD 5AMD 6AMD 7AMD 8
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 249/302252A.1.2 – 7390 RBSGeneral information:Operator.................. Date............. Visa..........Equipment characteristicsInitial configuration (1+0):NameAddress...................................................................................No ......... Street................................................Bld......... Stair................... Floor...........Town .............................................................Country .........................................................OperatorSite identificationName of Base StationVersionDesignation 1 2 3 4MainsReferenceICSSerial No.Tx levelBandSub-bandOnboard software versionType of cableLength of cableTiltAzimuthHeight of RBSType of Mounting
250/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01252Redundancy (1+1):Designation 5 6 7 8MainsReferenceICSSerial No.Tx levelBandSub-bandOnboard software versionType of cableLength of cableTiltAzimuthHeight of RBSType of Mounting
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 251/302252A.1.3 – Check point list for BS commissioningCHECKING THE SAFETY REGULATIONS:–Equipment ground wire OK NOK–Differential protection OK NOK–Fire protection OK NOKCHECKING THE RADIO INSTALLATION:–No contaminants or possible outflow on the antennas and radio OK NOK–No personnel allowed in the antenna fields OK NOK–Use of torque wrenchs for the radio assembly OK NOK–Mast rigidity and absence of vibration OK NOK–Antenna clearance in immediate vicinity OK NOK–Check that the ET390998 coaxial cable is installed OK NOK–Radio grounding OK NOKCHECKING THE WIRING BETWEEN RBS AND DBS:–No crushed cables OK NOK–Observance of the minimum bend radius OK NOK–Quality of cable ground wire installation OK NOK–Sealing of ground relays on the cable OK NOKCHECKING THE DBS INSTALLATION:–Min Max temperature of the premises containing the DBS (-5º to +55ºC) OK NOK–Check air inlets and outlets of the DBS backplane OK NOK–Check the 48 Volt polarity OK NOK–Check the ground wire of the DBS backplane OK NOK–Check that all the client access cables are shielded OK NOK–On the DBS panel, J101, J104 and J113 must not be connected OK NOK–Check the optical fiber routing OK NOK–Check the connection sequence of the RBS cables on the panel OK NOK
252/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01252PAGE INTENTIONALLY LEFT BLANK
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 253/302268Appendix 2 – Installation of 7390LT softwareA.2.1 – Requirements1. Microsoft Windows NT operating system running (Service Pack 5 or above)2. A7390 LT installation Kit3. User account with Administrator privileges to log-on withNote: Users without Administrator privileges will not be able to install SNTP service, required to runproperly the A7390LT.A.2.2 – Installation Procedure1. Be sure you have administrator rights2. Close all the aplications before start the 7390LT Installation3. Insert the CD " 7390LT Application Software"•The 7390LT Application Software screen appears•Click on «Install Software»•The Install Software screen appears
254/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01268•Click on «7390LT Application Software Release 2.2a»4. Select the language you prefer for the installation messages and click on the «OK» button.
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 255/3022685. When the Welcome screen appears (see below), click on the «Next» button to continue theinstallation procedure or press «Cancel» to exit the installation program.6. The Choose Destination Location screen appears (see below). If you agree with the defaultdestination folder, click on the «Next» button. If you disagree, you can change it by clicking on the«Browse» button and selecting the desired destination folder.Note :–If you always use the default directory, un-install the previous LT version before.–If you want to install several LT versions on the same computer, use different folders each time.
256/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 012687. The Select Program Manager Group screen appears (see below). If you agree with the defaultgroup name, click on the «Next» button. If you disagree, you can change it by typing the desiredname.Note: If you want to install several LTs on the same computer use different names for the Programgroup.8. The Start Installation screen appears (see below). Now, you are ready to install the A7390LT (CraftTerminal) in your computer. Click on the «Next» button to install it. You can cancel the LT installationby clicking on the «Cancel» button or you can change some of the choosen options by clicking onthe «Back» button.
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 257/3022689. The following window appears indicating that the LT installation is complete.10. If you dont’t have administrator rights, the following window appears. The LT installation has notbeen completely succesful, so you have to get administrator rights and start again.11. The installation has been completed. The following window appears. Press on «OK» to restart yourcomputer.12. After copying files, the Simple Network Time Protocol (SNTP) service is installed and started. Afterthis, the installation process is complete.13. Now, you are ready to run the 7390LT application.
258/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01268A.2.3 – License the .OCX files1. Run the Ptlic32.exe file located in :C:\Program_files\7390LT-Craft Terminal\Ptlic32.exeThe Power TCP screen appears.2. Click on the «Licensing» buttonThe following window appears:3. Enter the following values4. Click on «Add»The license is printed in the box "Installed License"5. Click on the license6. Click on the «Stamp License» button7. Select the following OCX file to stamp the license:C:\WinNT\System32\ptsnmp32.ocxA window appears on the screen mentioning that the licensing has been done succesfully.8. Move back to the main window (see window above), click on the license detailed in the box "InstalledLicense", and then click on the «Delete» button.Field ValuePart PT-119S/N 119-4-697-23346Company Alcatel CIT
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 259/302268A.2.4 – Craft.ini configurationIn the Craft.ini file (C: \ProgramFiles\7390LT\Craft.ini) enter the following values : A.2.5 – Running 7390LT1. From the "Start menu->programs", click on «7390LT-Craft terminal»2. See the User manual to operate the application.A.2.6 – NFS Server installationThis step is necessary to implement the 7390LT "Software download" functionality.If the NFS server installation was done, move on to the next section.A.2.6.1 – NFS server product referencesParameter ValueIP Address BS IP addressLocal Port 161 (port from where SNMP instructions are sent from the 7390LT)Remote port 161 (port from where SNMP responses are received on to the 7390LT)Trap port 161 (port where SNMP Trap messages are received on to the 7390LT)Reference DescriptionProduct Omni-NFS Server for NT/98/95 - Xlink TechnologyVersion 4.01 / 4.10 / 4.11 / 4.12Serial Number/Password Cf. certificate of AuthenticityDocumentation Omni-NFS for Windows 98/95 & NT - User Guide
260/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01268A.2.6.2 – Installation of NFS server–Depending of the NFS versions, screens can change from a version to another (following screensare NFS versions 4.01).–Log on to an account with administrator rightsFrom the Windows NT Explorer:–Click on the D: drive–Double-click on the Setup.exe programThe following window is displayed:–Click on the menu: "Install Omni Product"A window requesting the product serial number and a password appears.–Enter the requested information (see A.2.6.1 – NFS server product references) and click OKA window containing the following phrase appears:"This program requires a member of Administrator group to setup"–Click on «YES»A window entitled Omni-NFS, full screen is displayed along with a small Welcome window–Click on «Next»A window entitled Software License Agreement appears–Click on «YES»The following window appears:
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 261/302268–Click on «Next»A window titled "Select Program Folder" appears.–Click on «Next»Installation begins.After about ten seconds, the following window appears:–Click on «Yes, I want to restart my computer now», then on «Finish»The PC reboots.–Log on to an Administrator account before going to stage A.2.6.3 – Configuring the NFS server.
262/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01268A.2.6.3 – Configuring the NFS serverNote: You must be logged on the PC as a member of the administrator group in order to configure NFSserver.–Run the wnfsd.exe program: C:\Program_files\nfserver\wnfsd.exeNote: another possible path is: Start - Programs - Omni-NFS Server for Win NT-98-95 - NFS ServerConfiguration.A window similar to the following one appears:–Click on «New» in the tool barThe following window appears:For the path, select the directory where the Craft Terminal software packages are to be installed.The directory chosen for installation of the software packages must be in CAPITALLETTERS. The complete path of the directory must be exported. Example:C:\export\V2-A2-08.A nonexistent directory can appear to be exported without any problem but thisdoes not mean that it has been consequently created.
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 263/302268Choose the following options:–Exported to All Clients–Directory Access Rigths: Read only for the software Package directoryRead / Write for the Backup / Restore directoryRead / Write for the Mib Migration directory (C: \A7390WW)Click on «OK».Note: In case of access error to a sub-directory of an exported directory, export each of the directoriescontaining a package.The "MAPPING" step is absolutely mandatory.Click on the «MAPPING» button–In the Windows NT Accounts screen, select the NT account in which we logged in.–Enter User ID 851 (because the user ID of the ANT board is 851).–Click on the «Add==>» button.–Click on «OK»A.2.7 – Installation of Software PackagesFrom Windows NT Explorer, copy the directories containing the software packages to be downloaded tothe NFS assembly directory and export each of them.
264/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01268A.2.8 – FTP Server configuration1. From the "start" menu select "programs->Omni-NFS->FTP Server"2. The following window will appear. Click on the «Setup» button.3. The following window will appear. Click on «Users».4. Fill the window with the values showed in the following table.Parameter ValueUser Name ANT7390 (it depends on the FTP client in the agent)Password ww7390 (it depends on the FTP client in the agent)Full NameHome directory ../7390LT-craft terminal/FTPNota: The local folder depends on the destination folder chosen to install the LT software.
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 265/302268A.2.9 – How to remove the 7390LTFrom the Windows NT office desk, click successively on the following icons:•Workstation•Configuration panel•Add/Suppress programs•In the Add/remove programs properties screen, select the 7390LT•Click on «Add/remove»•Confirm the deletion of the program.Note: If a message window appears saying that some components were not removed properly from thePC:•Click on «OK»•Click on «OK» from the Add/remove programs properties screen•With the Windows NT explorer, remove the following folder :..\..\7390LT -Craft Terminal
266/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01268A.2.10 – SNTP Service ControlA.2.10.1 – SNTP ConfigurationIn order to check the SNTP client configuration, follow the next steps:1. From the " Start " menu, click on the «Control Panel» menu.The following window appears:
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 267/3022682. Click on the «SNTP for windows" icon:The following window appears:3. Click on the «Operating mode»" button.The following window appears.4. Verify that the window is filled as showing in the previous image.Note that the "polling period" field has to be the polling period that you have configured from theLT.5. Click on the «OK» button : the window is then closed.SNTP SERVICE ACTIVATEDIn order to check that the SNTP service is activated, follow the next steps:1. Select from the "start->configuration Panel->", the "service" menu option2. Look for the "Simple network time protocol" into the service-screen, and check that it is started.
268/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01268PAGE INTENTIONALLY LEFT BLANK
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 269/302276Appendix 3 – Installation of MIB migration toolA.3.1 – Requirements–Microsoft Windows NT operating system running (Service Pack 5 or above),–MIB migration CD.If "Python" version 1.5.2 is already installed on your PC, you do not need to re-install it! (go to A.3.2 – IfPython is already installed).Otherwise, you need to install "Python" (see A.3.3 – Python installation procedure).A.3.2 – If Python is already installedIf "Python" version 1.5.2 is already installed on your system:–Insert the CD in the CD driver.–Copy its contents (the directory "mibconv") on the hard disk of the PC (directly under C:).Note: By default, the LT will search the MIB migration CD content in the directory "C:\mibconv". If youcopy the CD in another directory you’ll have to modify the LT configuration file ("craft.ini") (seeA.3.4 – LT configuration file modification).Note: MIB migration CD is copied on the PC where the LT will be launched.A.3.3 – Python installation procedureNote: You need a user account with Administrator privileges to log-on with for this procedure.–Insert the CD " 7390LT Application Software"–The 7390LT Application Software screen appearsIF YOU INSTALL «MIB» MIGRATION TOOL IN ANOTHER DIRECTORY THAN «C:/mibconv», DO NOT USE SPACE CHARACTERS IN THE DIRECTORY NAME
270/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01276–Click on «Install Software»–The 7390LT Software screen appears–Click on «MIB Migration tool 2.1 to 2.2a»–A window appears, read it carefully and just press a key.–When the Welcome! screen appears, click on the «Next» button to continue the installation pro-cedure:
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 271/302276–The Select Destination Directory screen appears:–If you agree with the default destination folder, click on the «Next» button. If you disagree, you canchange it by clicking on the «Browse» button and selecting the desired destination folder. In thiscase, you must modify the LT configuration file ("craft.ini") (see A.3.4 – LT configuration file mo-dification).–The Select Components screen appears:–For the Mib Migration tool, you will deselect all boxes except "Python interpreter and library" (otheroptions are useless).–Then, click on the «Next» button to continue the installation procedure.–The Select Start Menu Group screen appears:AT THE EXCEPTION OF DIRECTORY NAME «PROGRAM FILES», OTHER PYTHONINSTALLATION DIRECTORY MUST NOT CONTAIN SPACE CHARACTERS,OTHERWISE MIB MIGRATION WILL FAIL
272/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01276–If you agree with the default group, click on the «OK» button to continue the installation procedure.If you disagree, you can change it by typing the desired name.–The Ready to install screen appears. Now you are ready to install "Python" in your computer.Click on the «Next» button to install it.–The Installing screen appears (progress bar) and is completed (at the end of the installation, youwill click on the «Finish» button).–If you don't have the administrator rights, an error message will appear.–If in the previous screen you have selected "Tcl/Tk installation", the Install Tcl/Tk screen will ap-pear:–Select «No» and the installation will finish.–If you select «Yes», Tcl/Tk will be installed (it's useless but there is no risk for the system) and theWelcome screen appears.–Click on the «Next» button to continue the Tcl/Tk installation procedure.
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 273/302276–The Select Destination Directory screen appears.–If you agree with the default destination folder, click on the «Next» button. If you disagree , youcan change it by clicking on «Browse» button and selecting the desired destination folder.–The Select Installation Type screen appears.–Select the default type (Full installation) or select another one (Minimal or customized installa-tion).). Click on the «Next» button to continue.–The Ready to Install screen appears.
274/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01276–Now you are ready to install "Tcl/Tk" in your computer. Click on the «Next» button to install it .–The Installing screen appears (progress bar).–The installation has been completed. The Installation Completed screen will appear.–Press «Finish».–A window appears to show that Tclsh is added in the "Start menu group".–The installation has been completed. The Installation Completed! screen will appear:
3CC12424AAAA TQ BJA 01 Issue 01 - April 2001 - Draft 04 275/302276–Press «Finish».–Now you are ready to use Python for the MIB migration.A.3.4 – LT configuration file modificationIf the MIB migration CD content has not been copied in the default directory ("C:"), you need to edit theLT configuration file (C:\ProgramFiles\7390LT\Craft.ini) and modify the following parameter:MIB_MIGRATION_SCRIPT_PATH="C:\mibconv"If "Python" has not been installed in the default directory, you need to edit the LT configuration file(C:\ProgramFiles\7390LT\Craft.ini) and modify the following parameter:MIB_MIGRATION_PYTHON_EXE="C:\Program Files\Python\Python.exe"
276/302 Issue 01 - April 2001 - Draft 04 3CC12424AAAA TQ BJA 01276PAGE INTENTIONALLY LEFT BLANK

Navigation menu