CIDMATE Technology GH9764 2.4GHz DSST Multi-Handset w/ CID+DAM User Manual Part 4
CIDMATE International Technology Inc. 2.4GHz DSST Multi-Handset w/ CID+DAM Part 4
Part 4
23. MAILBOX 2 Button: Press to activate functions for MAILBOX 2.
24. MINUTE Button: Press to set the minute during time setting, or press to set the
third digit of the access code during code setting.
25. MEMO Button: Press and hold down to record memo messages.
26. VOL + Button: Press to increase the speaker volume.
27. LED MESSAGE DISPLAY: indicates the number of memos/messages received, status of
the system.
Ea - Erase OP - OGM is playing 01 ~63 - No. of memos/messages
AO - Announce Only FU - Memory is full PA - Pause
28. SPEAKER Button: Press to answer the incoming call using the BASE UNIT.
29. MAILBOX 3 Button: Press to activate functions for MAILBOX 3.
30. IN USE LED Indicator: Lights up to indicate that the HANDSET is in TALK mode.
31. STOP Button: Press to stop playing a message. Press and hold down for more
than 3 seconds to initiate/re-initiate your answering machine, then release the button and
a “beep” will sound.(See detail operations in pages 34 and 47.)
32. CHARGE LED Indicator: Lights up when the HANDSET is placed on the BASE UNIT for
charging.
33. PLAY Button: Press to play messages.
34. MICROPHONE
play
stop
3
speaker
vol +
memo
min
2
BASE UNIT Controls
24.MINUTE BUTTON
Pg. 34, 41
23.MAILBOX 2 BUTTON
Pg. 36, 38~40 29.MAILBOX 3 BUTTON Pg. 36,
38~40
27.LED MESSAGE DISPLAY
Pg. 13, 36~37, 39~40
33.PLAY BUTTON Pg. 38~39
30.IN USE LED INDICATOR
31.STOPBUTTON Pg. 8, 34, 36, 39, 47
32.CHARGE LED INDICATOR
28.SPEAKER BUTTON Pg. 13
26.VOL+ BUTTON
Pg. 13, 36, 47
25.MEMO BUTTON Pg. 38, 40
34.MICROPHONE Pg. 35, 38
1
Safety Instructions ------------------------------------------------------------------------------------------- 4
Getting Started ------------------------------------------------------------------------------------------------ 6
Desk Mounting ------------------------------------------------------------------------------------------------ 9
Wall Mounting ----------------------------------------------------------------------------------------------- 10
Cordless Telephone Operation -------------------------------------------------------------------------- 12
Preparing for Use --------------------------------------------------------------------------------------- 12
NO LINE Indicator --------------------------------------------------------------------------------------- 12
Receiving Calls ------------------------------------------------------------------------------------------ 12
Receiving Calls Using the BASE UNIT SPEAKERPHONE --------------------------------- 12
Placing Calls --------------------------------------------------------------------------------------------- 14
Headset Feature ---------------------------------------------------------------------------------------- 14
Redial Feature ------------------------------------------------------------------------------------------- 15
Caller ID System Operation ------------------------------------------------------------------------------ 16
Caller ID System ---------------------------------------------------------------------------------------- 16
Viewing Caller Information During Incoming Calls ------------------------------------------ 16
MSG WAITING (Message Waiting) ------------------------------------------------------------ 16
Call Waiting ------------------------------------------------------------------------------------------ 17
Voice Mail Function -------------------------------------------------------------------------------- 17
C-F (Forwarded Call) ------------------------------------------------------------------------------ 17
L-D-C (Long Distance Call) ---------------------------------------------------------------------- 17
Caller List ------------------------------------------------------------------------------------------------- 17
Viewing the Caller List ----------------------------------------------------------------------------- 18
Placing a Call From the Caller List ------------------------------------------------------------- 18
Editing the Caller List before Dialing ----------------------------------------------------------- 18
Saving the Name and Number in the Caller List into the DIRECTORY --------------- 19
Deleting All Records in the Caller List --------------------------------------------------------- 19
Selective Deleting in the Caller List ------------------------------------------------------------ 19
Special Note to Caller List for Multiple Handset user -------------------------------------- 19
Name and Telephone Number DIRECTORY ----------------------------------------------------- 19
Viewing the DIRECTORY ------------------------------------------------------------------------- 20
Speed Viewing the DIRECTORY --------------------------------------------------------------- 20
Saving in the DIRECTORY ----------------------------------------------------------------------- 20
Contents
2
PREFERRED CALLS ----------------------------------------------------------------------------- 21
BLOCKED CALLS ---------------------------------------------------------------------------------- 21
Editing a Name and Number in the DIRECTORY ------------------------------------------- 21
Editing the Number in the DIRECTORY before Dialing ----------------------------------- 22
Placing Calls from the DIRECTORY ----------------------------------------------------------- 23
Deleting All Records in the DIRECTORY ----------------------------------------------------- 23
Selective Deleting in the DIRECTORY -------------------------------------------------------- 23
Function Operation ------------------------------------------------------------------------------------- 24
A. Language ---------------------------------------------------------------------------------------- 25
B. Silent On/Off ------------------------------------------------------------------------------------- 25
C. Time Set ------------------------------------------------------------------------------------------ 25
D. Ringer Volume ---------------------------------------------------------------------------------- 26
E. LCD Contrast ------------------------------------------------------------------------------------ 26
F. PBX Number ------------------------------------------------------------------------------------ 26
G. Flash Time --------------------------------------------------------------------------------------- 27
H. Pause Time -------------------------------------------------------------------------------------- 27
I. Voice Mail ---------------------------------------------------------------------------------------- 28
J. MSG Waiting (Message Waiting) ----------------------------------------------------------- 28
K. Handset Registration -------------------------------------------------------------------------- 29
L. RESET-------------------------------------------------------------------------------------------- 30
Telephone Keypad Characters ----------------------------------------------------------------------- 31
Multiple Handsets Feature ------------------------------------------------------------------------------- 32
How to Receive Calls ----------------------------------------------------------------------------------- 32
How to Place Calls -------------------------------------------------------------------------------------- 32
Privacy Feature ------------------------------------------------------------------------------------------ 32
Handset to Handset Intercom Call ------------------------------------------------------------------ 32
Transfer a Call to Other Extension Handset------------------------------------------------------- 33
Answering System Operation --------------------------------------------------------------------------- 34
Resetting the Answering System -------------------------------------------------------------------- 34
Setting the Day/Time Stamp-------------------------------------------------------------------------- 34
Recording your Outgoing Messages --------------------------------------------------------------- 35
Adjusting the Speaker Volume ---------------------------------------------------------------------- 36
Turning the Answering System ON/OFF ---------------------------------------------------------- 36
Contents
Setting to Answer Calls ----------------------------------------------------------------------------------- 37
Setting to Announce Only -------------------------------------------------------------------------------- 37
Screening Incoming Calls -------------------------------------------------------------------------------- 37
Message Alert ----------------------------------------------------------------------------------------------- 37
Setting Ring Select ----------------------------------------------------------------------------------------- 37
Recording a Memo ----------------------------------------------------------------------------------------- 38
Playing of Message/Memos ----------------------------------------------------------------------------- 38
Saving Messages ------------------------------------------------------------------------------------------ 39
Erasing Message ------------------------------------------------------------------------------------------- 40
When the Memory is Full --------------------------------------------------------------------------------- 40
Two-Way Recording --------------------------------------------------------------------------------------- 40
Remote Control Operation ----------------------------------------------------------------------------------- 41
Remote Operation through a Tone Telephone ------------------------------------------------------- 41
Remote Access Codes ------------------------------------------------------------------------------------ 41
Changing of the Remote Access Code ---------------------------------------------------------------- 41
Using the Remote Instruction Code -------------------------------------------------------------------- 42
Security----------------------------------------------------------------------------------------------------------- 43
Recharging the Battery Pack -------------------------------------------------------------------------------- 44
Changing the Battery Pack ---------------------------------------------------------------------------------- 45
Problem Solving ------------------------------------------------------------------------------------------------ 46
Technical Information ----------------------------------------------------------------------------------------- 48
FCC Requirements -------------------------------------------------------------------------------------------- 49
Warranty --------------------------------------------------------------------------------------------------------- 51
Wall Mounting Template -------------------------------------------------------------------------------------- 53
3
4
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock and/or injury, always follow these
basic safety precautions when using your cordless telephone equipment.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the telephone.
3. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY
PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth
for cleaning.
4. Do not use this telephone near water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool.
5. Place this telephone on a stable surface. Serious damage and/or injury may result if the
telephone falls.
6. Do not cover the slots and openings on this telephone. This telephone should not be
placed near or over a radiator or heat register. This telephone should not be placed in a
built-in installation unless proper ventilation is provided.
7. Operate this telephone using the electrical voltage as stated on the BASE UNIT of the
telephone or in the Owner’s Manual. If you are not sure of the voltage in your home,
consult your dealer or local power company.
8. Do not place anything on the power cord. Install the telephone where no one will step or
trip on the cord.
9. Do not overload wall outlets or extension cords as this can increase the risk of fire or
electric shock.
10. Never push objects of any kind through the slots in the telephone. They could touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the telephone.
11. To reduce the risk of electric shock, do not disassemble this telephone. Take it to a
qualified serviceman when service or repair work is required. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect reassembly can cause
electric shock when the telephone is subsequently used.
12. Unplug this telephone from the wall outlet and consult a qualified service representative in
any of the following situations:
A. When the power supply cord is frayed or damaged.
B.If liquid has been spilled into the telephone.
C. If the telephone has been exposed to rain or water.
D. If the telephone does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the telephone to normal operation.
Safety Instructions
5
E. If the telephone has been dropped or the case has been damaged.
F. If the telephone exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
14. Never install telephone wiring during a lightning storm.
15. Never install telephone jacks in wet locations unless the jack is specifically designed for
wet locations.
16. Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
17. Use caution when installing or modifying telephone lines.
Battery Safety
CAUTION:
Danger of explosion if the BATTERY PACK is replaced with incorrect type.
Replace only with the same or equivalent type. To reduce the risk of fire
or personal injury, read and follow these instructions:
1. Use only the following type and size of BATTERY PACK:
Cordless Telephone BATTERY PACK
3.6V, 750mAh
U.S. Electronics Inc.
Ni-MH BATTERY PACK: Model B660
(See page 44 for ordering information.)
2. Do not dispose of the BATTERYPACK in a fire. The BATTERYPACK may explode. Check
with local codes for possible special disposal instructions.
3. Do not open or mutilate the BATTERY PACK. Released electrolyte is corrosive and may
cause damage to the eyes or skin. Electrolyte may be toxic if swallowed.
4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK
with conductive materials such as rings, bracelets, and keys. The BATTERY PACK or
conductor may overheat and cause burns.
5. Charge the BATTERY PACK provided with (or identified for use with) this telephone only
in accordance with the instructions and limitations specified in this manual.
6. Observe proper polarity orientation between the BAT T E RY PACK and BAT T E RY
CHARGER.
SAVE THESE INSTRUCTIONS
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The
BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws, it
may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with
your local solid waste officials for details in your area for recycling options or proper disposal.
Safety Instructions
6
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless
telephone. For more detailed descriptions of the operations and features of this telephone, refer
to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is any visible
damage, do not attempt to operate this equipment. Return it to the place of purchase.
2. Check to be sure you have all items that come with this cordless telephone system. You
should have a H A N D S E T, BASE UNIT, AC ADAPTER, MOUNTING BRACKET,
TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD, BELT CLIP, and an
Owner’s Manual.
3. Insert the small plug on the end of the AC ADAPTER into the POWER-IN CONNECTION
JACK at the back of the BASE UNIT.
4. Plug the AC ADAPTER into a 120V AC wall outlet, and the BASE UNIT POWER LED
indicator will light up.
USE ONLY WITH CLASS 2 POWER SOURCE 12V DC, 500 mA.
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and
the other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE
UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C
TELEPHONE JACK ADAPTER. This adapter is available at the same place you purchased
your telephone.)
6. We recommend not placing this unit next to appliances. Doing so may cause interference.
Getting Started
TELEPHONE
LINE CORD SHORT TELEPHONE
LINE CORD
MOUNTING
BRACKET BELT CLIP
AC ADAPTER BATTERY
PACK
HANDSET BASE UNIT
!
7
7. Install the BATTERYPACK by plugging it into the
BATTERY CONNECTOR inside the BATTERY
COMPARTMENT. The HANDSET LCD Screen
will display “WAIT REG.” Follow the Handset
Registration in page 29 to register your
HANDSET.
8. Place the BATTERY PACK inside the BATTERY
COMPARTMENT.
9. Slide the H A N D S E T B AT T E R Y
COMPARTMENT COVER firmly into place in its
closed position.
10. IMPORTANT: Before initial use, charge the
HANDSET for 12 hours.
11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing
system, set the TONE/PULSE Select Switch
to the TONE position.
B. If you have a rotary dialing system, set the
TONE/PULSE Select Switch to the PULSE
position.
C. If you are unsure which system you have, set
the TONE/PULSE Select Switch to the TONE
position. Press the button on the
H A N D S E T and make a call. If the call
connects, leave the switch as is; otherwise
set to the PULSE position.
talk
Getting Started
8
12. Set the date and time on the HANDSET. (See page 25 for details.)
13. Press and hold the button to initiate your Answering System. (See details on page
34.)
14. Set the date and time on the BASE UNIT. (See page 34 for details.)
You are now ready to use your new
BellSouth Cordless Telephone.
stop
Press the button to confirm that you
have a dial tone. If you do not get a dial
tone, review steps 3 through 11. If you still
do not have a dial tone, refer to the
Problem Solving section on page 46.
With the back of the HANDSET facing up,
insert one side of the BELT CLIP HOOK
into the matching slot at the top side of the
HANDSET. Press down on the opposite
side of the BELT CLIP until the other
HOOK locks into the slot on the side of the
HANDSET.
talk
IMPORTANT
In order to utilize the Caller ID feature, you must
subscribe to Caller ID service from your local
telephone company.
Getting Started
ANTENNA
HANDSET
BELT CLIP HOOK
9
Desk Mounting
One of the special features of your telephone is the unique design of the MOUNTING
BRACKET which can hold your phone at an angle when desk mounting or wall mounting.
With the back of the BASE UNIT facing up, rotate the MOUNTING BRACKET to the position as
in Figure 1 (follow the arrow direction for the DESK MOUNT). Place your telephone on any flat
surface of desk as in Figure 2
IMPORTANT: Attach the MOUNTING BRACKET when using your phone on a desk.
Desk Mounting
IMPORTANT
Placing your BASE UNIT near appliances such as
televisions, refrigerators, radios, or microwave ovens
may cause interference.
FIGURE 2FIGURE 1
10
Wall Mounting
You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, rotate the MOUNTING BRACKETto the position
shown in Figure 1 (follow the arrow direction for the WALL MOUNT).
2. Insert the small plug on the end of the AC ADAPTER into the POWER-IN CONNECTION
JACK at the back of the BASE UNIT.
3. Plug the AC ADAPTER into a 120V wall outlet.
4. Connect the SHORT TELEPHONE LINE CORD to the TELEPHONE LINE CONNECTION
JACK. Put the SHORT TELEPHONE LINE CORD inside the MOLDED WIRING CHANNEL
as shown in Figure 2.
5. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL
JACK.
Wall Mounting
FIGURE 2
FIGURE 1