Cisco Systems 102040 Hand Held Computer with Printer User Manual

Guide Corrections

TeamPad 500

Quick Reference Guide Regulatory Additions ISSUE: 1.0

Page 1 of 1

Regulatory Document

The following additional items will be added to the TeamPad 500 Quick Reference guide at time of release.

1. FCC RF Exposure Guidelines:

2. RF Devices Caution Statement / Present Certification Information

3. Installation / Servicing Procedures

4. Operating Distance

WARNING: FCC Exposure Guidelines

To satisfy FCC RF exposure compliance requirements for a mobile transmitting

device, this device should be used in hand-held, hand-operated configurations only.

The device and its antenna should generally maintain a separation distance of 20 cm

or more from a person’s body. This device is designed to be used in a person’s hands

and it’s operating configurations, generally do not support normal transmissions

while it is carried in pockets or holsters next to a person’s body.

This device has been properly certified to be used with the the following RF card(s):

1. Cisco {Part:AIR-LMC352}, {FCC ID: LDK102040}, {Canada: 246 1103 2079A}.

Any changes or modifications to Fujitsu’s equipment not expressly approved by

Fujitsu could void the user’s authority to operate the equipment per FCC regulations.

Only authorized Fujitsu integrators are permitted to install and service the RF

devices within this unit.

This device shall be used at a distance of more than 10” away from the body to

allow for the best viewing angle for reading the display and also operating th

device.