Cisco Systems 102040 Hand Held Computer with Printer User Manual Quick Referenc Guide Additions

Quick Ref Guide Additions

TeamPad 500

Quick Reference Guide Regulatory Additions ISSUE: 1.0

Page 1 of 1

Regulatory Document

The following additional items will be added to the TeamPad 500 Quick Reference guide at time of release.

1. FCC RF Exposure Guidelines:

2. RF Devices Caution Statement / Present Certification Information

3. Installation / Servicing Procedures

WARNING: FCC Exposure Guidelines

To satisfy FCC RF exposure compliance requirements for a portable transmitting

device, this device should be used in hand-held, hand-operated configurations only.

The device and its antenna should generally maintain a separation distance of 20 cm

or more from a person’s body; except for the hands and wrists because of higher

exposure limits for extremities. This device is designed to be used in a person’s hands

and it’s operating configurations, generally do not support normal transmissions

while it is carried in pockets or holsters next to a person’s body.

This device has been properly certified to be used with the the following RF card(s):

1. Cisco {Part:AIR-LMC352}, {FCC ID: LDK102040}, {Canada: 246 1103 2079A}.

Any changes or modifications to Fujitsu’s equipment not expressly approved by

Fujitsu could void the user’s authority to operate the equipment per FCC regulations.

Only authorized Fujitsu integrators are permitted to install and service the RF

devices within this unit.