Fuji Film 02000002 Wireless LAN Module User Manual 00 LX22 OM 200 EN indb

Fuji Film Corporation Wireless LAN Module 00 LX22 OM 200 EN indb

02000002 User Manual >

[STC]User Manual_Part I PDF Download & Text

[STC]User Manual_Part I

Download:
Mirror Download [FCC.gov]
Document ID	2842488
Application ID	CnWNV7Lwz2WP/4evH2UKCQ==
Document Description	[STC]User Manual_Part I
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	459.15kB (5739341 bits)
Date Submitted	2015-12-15 00:00:00
Date Available	2016-06-13 00:00:00
Creation Date	2015-12-10 20:47:32
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2015-12-10 20:47:38
Document Title	$00 LX22_OM_200-EN.indb
Document Creator	Adobe InDesign CS4_J (6.0.6)
Document Author:	S01-01

BL00004738-200
DIGITAL CAMERA
X-E2S
Owner’s Manual
Thank you for your purchase of this product. This
manual describes how to use your FUJIFILM X-E2S
digital camera. Be sure that you have read and understood its contents before using the camera.
■ Product website:
http://fujifilm-x.com/x-e2s/
EN
Before You Begin
First Steps
Basic Photography
and Playback
Basic Movie Recording
and Playback
The Q (Quick Menu) Button
More on Photography
and Playback
Menus
■ Additional information may be found in online manuals available from:
http://fujifilm-dsc.com/manuals/
Connections
Technical Notes
Troubleshooting
Appendix
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety and operating instructions
should be read before the appliance is operated.
• Retain Instructions: The safety and operating instructions
should be retained for future reference.
• Heed Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
• Follow Instructions: All operating and use instructions
should be followed.
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to. This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
Grounding or Polarization: This video product is equipped point where they exit from the appliance.
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will ﬁt into the Accessories: Do not place this video product on an unstable
power outlet only one way. This is a safety feature. If you cart, stand, tripod, bracket, or table. The video product may
are unable to insert the plug fully into the outlet, try revers- fall, causing serious injury to a child or adult, and serious
ing the plug. If the plug should still fail to ﬁt, contact your damage to the appliance. Use only with a cart, stand, trielectrician to replace your obsolete outlet. Do not defeat pod, bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance
the safety purpose of the polarized plug.
should follow the manufacturer’s instructions, and should use
Alternate Warnings: This video product is equipped with a mounting accessory recommended by the manufacturer.
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only ﬁt into a grounding- An appliance and cart combination
type power outlet. This is a safety feature. If you are unable should be moved with care. Quick
to insert the plug into the outlet, contact your electrician to stops, excessive force, and uneven
replace your obsolete outlet. Do not defeat the safety pur- surfaces may cause the appliance
and cart combination to overturn.
pose of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of ﬁre or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.
ii
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Ground Clamp
Antenna Lead
in Wire
Electric Service
Equipment
Antenna
Discharge Unit
(NEC SECTION
810-20)
Ground Clamps
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Grounding Conductors
(NEC SECTION 810-21)
Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Use
Cleaning: Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this
video product through openings as they may touch dangerous
voltage points or short out parts that could result in a ﬁre or electric shock. Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product receiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
For Your Safety
Service
Be sure to read these notes before use
Servicing: Do not attempt to service this video product
Safety Notes
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to • Make sure that you use your camera correctly. Read these
qualiﬁed service personnel.
safety notes and your Owner’s Manual carefully before use.
Damage Requiring Service: Unplug this video product from • After reading these safety notes, store them in a safe place.
the wall outlet and refer servicing to qualiﬁed service perAbout the Icons
sonnel under the following conditions:
The icons shown below are used in this document to indi• When the power-supply cord or plug is damaged
cate the severity of the injury or damage that can result if the
• If liquid has been spilled, or objects have fallen into the
information indicated by the icon is ignored and the product
video product.
is used incorrectly as a result.
• If the video product has been exposed to rain or water.
• If the video product has been dropped or the cabinet has
This icon indicates that death or seribeen damaged.
WARNING ous injury can result if the information
If the video product does not operate normally follow the
is ignored.
operating instructions. Adjust only those controls that are
This icon indicates that personal injury
covered by the operating instructions as an improper adjustCAUTION or material damage can result if the inment of other controls may result in damage and will often
formation is ignored.
require extensive work by a qualiﬁed technician to restore
The icons shown below are used to indicate the nature of the
the video product to its normal operation.
instructions which are to be observed.
When the video product exhibits a distinct change in perforTriangular icons tell you that this information remance — this indicates a need for service.
quires attention (“Important”).
Replacement Parts: When replacement parts are required,
Circular icons with a diagonal bar tell you that the
be sure the service technician has used replacement parts
action indicated is prohibited (“Prohibited”).
speciﬁed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in ﬁre, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
WARNING
Unplug
from power
socket
Do not use in
the bathroom
or shower
Do not disassemble
Do not touch
internal parts
If a problem arises, turn the camera off, remove the
battery, and disconnect and unplug the AC power
adapter. Continued use of the camera when it
is emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a ﬁre
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the
camera. If water or foreign objects get inside the
camera, turn the camera oﬀ, remove the battery,
and disconnect and unplug the AC power adapter. Continued use of the camera can cause a ﬁre
or electric shock. Contact your FUJIFILM dealer.
Do not use the camera in the bathroom or shower.
This can cause a ﬁre or electric shock.
Never attempt to change or take apart the camera
(never open the case). Failure to observe this precaution can cause ﬁre or electric shock.
Should the case break open as the result of a fall or
other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged
parts. Remove the battery immediately, taking
care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the
connection cord. These actions could damage the
cord and cause a ﬁre or electric shock. If the cord
is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do
not use the camera while walking or driving. This
can result in you falling down or being involved in
a traﬃc accident.
iii
For Your Safety
WARNING
Do not touch any metal parts of the camera during
a thunderstorm. This can cause an electric shock
due to induced current from the lightning discharge.
Do not use the battery except as specified. Load the
battery as shown by the indicator.
Do not heat, change or take apart the battery. Do not
drop or subject the battery to impacts. Do not store
the battery with metallic products. Any of these actions can cause the battery to burst or leak and
cause ﬁre or injury as a result.
Use only batteries or AC power adapters specified for
use with this camera. Do not use voltages other than
the power supply voltage shown. The use of other
power sources can cause a ﬁre.
If the battery leaks and fluid gets in contact with your
eyes, skin or clothing, flush the affected area with
clean water and seek medical attention or call an
emergency number right away.
Do not use the charger to charge batteries other than
those specified here. The supplied charger is for
use only with batteries of the type supplied with
the camera. Using the charger to charge conventional batteries or other types of rechargeable
batteries can cause the battery to leak, overheat
or burst.
Using a flash too close to a person’s eyes may cause
visual impairment. Take particular care when photographing infants and young children.
Do not use in the presence of flammable objects, explosive gases, or dust.
When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover
the battery terminals with insulation tape. Contact
with other metallic objects or batteries could
cause the battery to ignite or burst.
iv
WARNING
Keep memory cards, hot shoes, and other small parts
out of the reach of small children. Children may
swallow small parts; keep out of reach of children.
Should a child swallow a small part, seek medical
attention or call emergency.
Keep out of reach of small children. Among the elements that could cause injury are the strap, which
could become entangled about a child’s neck,
causing strangulation, and the ﬂash, which could
cause visual impairment.
Follow the directions of airline and hospital personnel. This product generates radio-frequency
emissions that could interfere with navigational
or medical equipment.
CAUTION
Do not use this camera in locations affected by oil
fumes, steam, humidity or dust. This can cause a
ﬁre or electric shock.
Do not leave this camera in places subject to extremely
high temperatures. Do not leave the camera in
locations such as a sealed vehicle or in direct sunlight. This can cause a ﬁre.
Do not place heavy objects on the camera. This can
cause the heavy object to tip over or fall and
cause injury.
Do not move the camera while the AC power adapter
is still connected. Do not pull on the connection cord
to disconnect the AC power adapter. This can damage the power cord or cables and cause a ﬁre or
electric shock.
Do not cover or wrap the camera or the AC power
adapter in a cloth or blanket. This can cause heat
to build up and distort the casing or cause a ﬁre.
When you are cleaning the camera or you do not plan
to use the camera for an extended period, remove
the battery and disconnect and unplug the AC power
adapter. Failure to do so can cause a ﬁre or electric shock.
When charging ends, unplug the charger from the
power socket. Leaving the charger plugged into
the power socket can cause a ﬁre.
When a memory card is removed, the card could come
out of the slot too quickly. Use your finger to hold it
and gently release the card. Injury could result to
those struck by the ejected card.
Request regular internal testing and cleaning for
your camera. Build-up of dust in your camera
can cause a ﬁre or electric shock. Contact your
FUJIFILM dealer to request internal cleaning every
two years. Please note that this service is not free
of charge.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
For Your Safety
■ Storage
The Battery and Power Supply
Note: Check the type of battery used in your camera and Performance may be impaired if the battery is left unused
for extended periods when fully charged. Run the battery
read the appropriate sections.
ﬂat before storing it.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten battery life or If the camera will not be used for an extended period, remove the battery and store it in a dry place with an ambient
cause leakage, overheating, ﬁre, or explosion.
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
Li-ion Batteries
not store in locations exposed to extremes of temperature.
Read this section if your camera uses a rechargeable
■ Cautions: Handling the Battery
Li-ion battery.
• Do not transport or store with metal objects such as neckThe battery is not charged at shipment. Charge the battery
laces or hairpins.
before use. Keep the battery in its case when not in use.
• Do not expose to ﬂame or heat.
• Do not disassemble or modify.
■ Notes on the Battery
The battery gradually loses its charge when not in use. • Use with designated chargers only.
• Dispose of used batteries promptly.
Charge the battery one or two days before use.
• Do not drop or subject to strong physical shocks.
Battery life can be extended by turning the camera oﬀ when • Do not expose to water.
not in use.
• Keep the terminals clean.
Battery capacity decreases at low temperatures; a depleted • The battery and camera body may become warm to the
touch after extended use. This is normal.
battery may not function at when cold. Keep a fully charged
spare battery in a warm place and exchange as necessary, ■ Disposal
or keep the battery in your pocket or other warm place and Dispose of used batteries in accord with local regulations.
insert it in the camera only when shooting. Do not place
the battery in direct contact with hand warmers or other AC Power Adapters (Available Separately)
Use only FUJIFILM AC power adapters designated for use
heating devices.
with this camera. Other adapters could damage the camera.
■ Charging the Battery
• The AC power adapter is for indoor use only.
Charge the battery in the supplied battery charger. Charg• Be sure the DC plug is securely connected to the camera.
ing times will increase at ambient temperatures below
• Turn the camera oﬀ before disconnecting the adapter.
+10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt to
Disconnect the adapter by the plug, not the cable.
charge the battery at temperatures above 40 °C (+104 °F); at
• Do not use with other devices.
temperatures below 0 °C (+32 °F), the battery will not charge.
• Do not disassemble.
Do not attempt to recharge a fully charged battery. The bat- • Do not expose to high heat and humidity.
tery does not however need to be fully discharged before • Do not subject to strong physical shocks.
charging.
• The adapter may hum or become hot to the touch during
use. This is normal.
The battery may be warm to the touch immediately after
• If the adapter causes radio interference, reorient or relocate
charging or use. This is normal.
the receiving antenna.
■ Battery Life
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the
end of its service life and should be replaced.
Using the Camera
• Do not aim the camera at extremely bright light sources,
such as the sun in a cloudless sky. Failure to observe this
precaution could damage the camera image sensor.
• Strong sunlight focused through the viewﬁnder may damage the panel of electronic viewﬁnder (EVF). Do not aim
the electronic viewﬁnder at the sun.
Take Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost proﬁts incurred as a result of
product malfunction.
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system cannot be used in ways that
infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the photographing of
stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
Handling
To ensure that images are recorded correctly, do not subject
the camera to impact or physical shocks while images are
being recorded.
For Your Safety
Liquid Crystal
In the event that the display is damaged, care should be
taken to avoid contact with liquid crystal. Take the urgent
action indicated should any of the following situations arise:
• If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and
running water.
• If liquid crystal enters your eyes, ﬂush the aﬀected eye with
clean water for at least 15 minutes and then seek medical
assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting, then seek medical assistance.
Electrical Interference
NOTICES
This camera may interfere with hospital or aviation equipTo prevent fire or shock hazard, do not expose the unit
ment. Consult with hospital or airline staﬀ before using the
to rain or moisture.
camera in a hospital or on an aircraft.
Please read the “Safety Notes” and make sure you unColor Television Systems
derstand them before using the camera.
NTSC (National Television System Committee) is a color television telecasting speciﬁcation adopted mainly in the U.S.A., Perchlorate Material—special handling may apply. See
Canada, and Japan. PAL (Phase Alternation by Line) is a color http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
television system adopted mainly in European countries and
China.
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera ﬁle format in
Although the display is manufactured using extremely high- which information stored with photographs is used for optiprecision technology, it may contain pixels that are always lit mal color reproduction during printing.
or that do not light. This is not a malfunction, and images
IMPORTANT NOTICE: Read Before Using the Software
recorded with the product are unaﬀected.
Direct or indirect export, in whole or in part, of licensed software without the permission of the applicable governing
Trademark Information
Digital Split Image is a trademark or registered trademark bodies is prohibited.
of FUJIFILM Corporation. xD-Picture Card and E are
trademarks of FUJIFILM Corporation. The typefaces included
herein are solely developed by DynaComware Taiwan Inc.
Macintosh, QuickTime, and Mac OS are trademarks of Apple
Inc. in the U.S.A. and other countries. The Windows logo is a
trademark of the Microsoft group of companies. Wi-Fi® and
Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi
Alliance. Adobe and Adobe Reader are either trademarks or
registered trademarks of Adobe Systems Incorporated in the
U.S.A. and/or other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo is a trademark.
YouTube is a trademark of Google Inc. All other trade names
mentioned in this manual are the trademarks or registered
trademarks of their respective owners.
vi
For Your Safety
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
eﬀects (by heating tissue), exposure of low-level RF that does
not produce heating eﬀects causes no known adverse health
eﬀects. Many studies of low-level RF exposures have not
found any biological eﬀects. Some studies have suggested
that some biological eﬀects might occur, but such ﬁndings
have not been conﬁrmed by additional research. X-Pro2 has
been tested and found to comply with IC radiation exposure
limits set forth for an uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF) Exposure rules.
The exposure standard for wireless device employs a unit
of measurement known as the Speciﬁc Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR
are conducted using standard operating positions accepted
FCC Statement: This device complies with Part 15 of the FCC by the FCC with the device transmitting at its highest certiDisposal of Electrical and Electronic Equipment in Private Households
Rules. Operation is subject to the following two conditions: ﬁed power level in all tested frequency bands.
In the European Union, Norway, Iceland and
(1) This device may not cause harmful interference, and
Liechtenstein: This symbol on the product, or in
(2) this device must accept any interference received, includ- Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujiﬁlm-speciﬁed ferrite- the manual and in the warranty, and/or on its
ing interference that may cause undesired operation.
packaging indicates that this product shall not
core A/V cable, USB cable, and DC supply cord.
CAUTION: This equipment has been tested and found to combe treated as household waste. Instead it should
ply with the limits for a Class B digital device, pursuant to
be taken to an applicable collection point for the
A lithium ion battery that is recyclable
Part 15 of the FCC Rules. These limits are designed to prorecycling of electrical and electronic equipment.
powers the product you have purchased.
vide reasonable protection against harmful interference in a
Please call 1-800-8-BATTERY for informaBy ensuring this product is disposed of correctly, you will
residential installation. This equipment generates, uses, and
tion on how to recycle this battery.
help prevent potential negative consequences to the encan radiate radio frequency energy and, if not installed and
vironment and human health, which could otherwise be
used in accordance with the instructions, may cause harmful
For Customers in Canada
caused by inappropriate waste handling of this product.
interference to radio communications. However, there is no
CAN ICES-3 (B)/NMB-3(B)
This symbol on the batteries or accumulators inguarantee that interference will not occur in a particular inCAUTION: This Class B digital apparatus complies with Cana- dicates that those batteries shall not be treated
stallation. If this equipment does cause harmful interference
dian ICES-003.
as household waste.
to radio or television reception, which can be determined by
turning the equipment oﬀ and on, the user is encouraged Industry Canada statement: This device complies with RSSto try to correct the interference by one or more of the fol- 210 of the Industry Canada Rules. Operation is subject to If your equipment contains easy removable batteries or
the following two conditions: (1) This device may not cause accumulators please dispose these separately according to
lowing measures:
harmful interference, and (2) this device must accept any your local requirements.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. interference received, including interference that may cause The recycling of materials will help to conserve natural resourc• Connect the equipment into an outlet on a circuit diﬀerent undesired operation.
es. For more detailed information about recycling this product,
from that to which the receiver is connected.
This device and its antenna(s) must not be co-located or op- please contact your local city oﬃce, your household waste
• Consult the dealer or an experienced radio/TV technician erating in conjunction with any other antenna or transmit- disposal service or the shop where you purchased the product.
for help.
ter, except tested built-in radios. The County Code Selection In Countries Outside the European Union, Norway, Iceland and
FCC Caution: Any changes or modiﬁcations not expressly ap- feature is disabled for products marketed in the US/ Canada. Liechtenstein: If you wish to discard this product, including
proved by the party responsible for compliance could void Radiation Exposure Statement: The available scientiﬁc the batteries or accumulators, please contact your local authe user’s authority to operate this equipment.
evidence does not show that any health problems are as- thorities and ask for the correct way of disposal.
This transmitter must not be co-located or operating in con- sociated with using low power wireless devices. There is no In Japan: This symbol on the batteries indicates
proof, however, that these low power wireless devices are that they are to be disposed of separately.
junction with any other antenna or transmitter.
absolutely safe. Low power Wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while
being used. Whereas high levels of RF can produce health
Contains IC : 7736B-02000002
Contains FCC ID : W2Z-02000002
vii
For Your Safety
Be sure to read these notes before use
Safety Notes
Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your FUJIFILM dealer.
• Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s
Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of the injury or
damage that can result if the information indicated by the icon is ignored and the product
is used incorrectly as a result.
This icon indicates that death or serious injury can result if the information is ignored.
This icon indicates that personal injury or material damage can result if
CAUTION
the information is ignored.
WARNING
The icons shown below are used to indicate the nature of the instructions which are to be
observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited
(“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed
(“Required”).
WARNING
Do not use in
the bathroom or
shower
Do not disassemble
Do not touch
internal parts
viii
Do not immerse in or expose to water. Failure to observe this precaution can cause
a ﬁre or electric shock.
Do not disassemble (do not open the case). Failure to observe this precaution can
cause ﬁre, electric shock, or injury due to product malfunction.
Should the case break open as the result of a fall or other accident, do not touch the
exposed parts. Failure to observe this precaution could result in electric shock
or in injury from touching the damaged parts. Remove the camera battery
immediately, taking care to avoid injury or electric shock, and take the product
to the point of purchase for consultation.
WARNING
Do not place on unstable surfaces. The product may fall, causing injury.
Do not view the sun through the lens or camera viewfinders. Failure to observe this
precaution can cause permanent visual impairment.
CAUTION
Do not use or store in locations that are exposed to steam, or smoke or are very humid
or extremely dusty. Failure to observe this precaution can cause ﬁre or electric
shock.
Do not leave in direct sunlight or in locations subject to very high temperatures, such
as in a closed vehicle on a sunny day. Failure to observe this precaution can cause
ﬁre.
Keep out of the reach of small children. This product could cause injury in the
hands of a child.
Do not handle with wet hands. Failure to observe this precaution can cause
electric shock.
Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into
the camera when the sun is in or close to the frame can cause ﬁre or burns.
When the product is not in use, replace the lens caps and store out of direct sunlight.
Sunlight focused by the lens can cause ﬁre or burns.
Do not carry the camera or lens while they are attached to a tripod. The product can
fall or strike other objects, causing injury.
For Your Safety
European Union regulatory notice
This product complies with the following EU Directives:
• RoHS Directive 2011/65/EU
• R & TTE Directive 1999/5/EC
Wireless Network Devices: Cautions
• This device operates on the same frequency as commercial, educational, and medical devices and
wireless transmitters. It also operates on the same frequency as licensed transmitters and
special unlicensed low-voltage transmitters used in RFID tracking systems for assembly
lines and in other similar applications.
Compliance with these directives implies conformity to applicable harmonized European
•
To prevent interference with the above devices, observe the following precautions. Conﬁrm that
standards (European Norms) which are listed on the EU Declaration of Conformity issued by
the RFID transmitter is not in operation before using this device. Should you observe that
FUJIFILM Corporation for this product or product family.
the device causes interference in licensed transmitters used for RFID tracking, immediThis compliance is indicated by the following conformity marking placed on the product:
ately stop using the aﬀected frequency or move the device to another location. If you
notice that this device causes interference in low-voltage RFID tracing systems, contact a
FUJIFILM representative.
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g.
Bluetooth).
Regarding the Declaration of Conformity, visit http://www.fujifilm.com/products/digital_
cameras/x/fujifilm_x_e2s/pdf/index/fujifilm_x_e2s_cod.pdf.
2.4DS/OF4
This sticker indicates that this device operates in the 2.4 GHz
band using DSSS and OFDM modulation and may cause interference at distances of up to 40 m.
IMPORTANT: Read the following notices before using the camera’s built-in wireless
transmitter.
Q This product, which contains encryption function developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported
or re-exported to any country to which the United States embargoes goods.
• Use only as part of a wireless network. FUJIFILM does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability,
for example in medical devices or other systems that may directly or indirectly impact
human life. When using the device in computer and other systems that demand a greater
degree of reliability than wireless networks, be sure to take all necessary precautions to
ensure safety and prevent malfunction.
• Use only in the country in which the device was purchased. This device conforms to regulations
governing wireless network devices in the country in which it was purchased. Observe all
location regulations when using the device. FUJIFILM does not accept liability for problems arising from use in other jurisdictions.
• Wireless data (images) may be intercepted by third parties. The security of data transmitted
over wireless networks is not guaranteed.
• Do not use the device in locations subject to magnetic fields, static electricity, or radio interference.
Do not use the transmitter in the vicinity of microwave ovens or in other locations subject
to magnetic ﬁelds, static electricity, or radio interference that may prevent reception of
wireless signals. Mutual interference may occur when the transmitter is used in the vicinity
of other wireless devices operating in the 2.4 GHz band.
• The wireless transmitter operates in the 2.4 GHz band using DSSS and OFDM modulation.
ix
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information
on specific topics, consult the sources below.
Table of Contents ................................................. P xii
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
Troubleshooting ................................................
................................................P
P 135
Having a specific problem with the camera?
Find the answer here.
Warning Messages and Displays .........................
.........................P
P 140
Find out what’s behind that flashing icon or error
message in the display.
Restrictions on Camera Settings ..........................P
.......................... P 151
See page 151 for restrictions on the options
available in each shooting mode.
Memory Cards
Pictures are stored on optional SD, SDHC, and SDXC memory cards (P 20), referred to in this manual as “memory
cards.”
Product Care
Camera body: For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body
after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform
the leather on the camera body. Any liquid on the camera should be removed immediately with a
soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then
gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece
of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. To
prevent dust entering the camera, replace the body cap when no lens is in place.
Image sensor: Dust can be removed from the image sensor using the V SENSOR CLEANING option in
the setup menu (P 110).
Interchangeable lenses: Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a
small amount of lens-cleaning fluid has been applied. Replace the front and rear caps when the lens
is not use.
xi
Table of Contents
For Your Safety .....................................................................................ii
IMPORTANT SAFETY INSTRUCTIONS.........................................ii
Safety Notes .......................................................................................iii
NOTICES ...............................................................................................vi
Safety Notes .....................................................................................viii
About This Manual .............................................................................x
Product Care ........................................................................................xi
Before You Begin
Symbols and Conventions..............................................................1
Supplied Accessories ........................................................................1
Parts of the Camera ...........................................................................2
The Selector ........................................................................................5
The Command Dial ..........................................................................5
The AUTO (Auto Mode) Button ...................................................6
Camera Displays ................................................................................7
Shooting: Viewfinder/LCD Monitor ........................................7
Playback: Viewfinder/LCD Monitor .........................................9
Lenses ................................................................................................... 10
Parts of the Lens ............................................................................. 10
Removing the Caps ....................................................................... 10
Attaching the Hood ...................................................................... 10
Lenses with Aperture Rings ....................................................... 11
Lenses with No Aperture Rings ................................................ 11
Lenses with O.I.S. Switches......................................................... 12
Manual Focus Lenses.................................................................... 12
xii
First Steps
Attaching the Strap ........................................................................ 13
Attaching a Lens .............................................................................. 15
Charging the Battery ..................................................................... 16
Inserting the Battery and a Memory Card ........................... 17
Compatible Memory Cards ..................................................... 20
Turning the Camera on and Off ................................................ 21
Basic Setup ......................................................................................... 22
Changing Basic Settings ............................................................. 23
Choosing a Display ......................................................................... 24
The Viewfinder Display ................................................................ 25
Focusing the Viewfinder ............................................................. 25
Adjusting Display Brightness .................................................... 25
The DISP/BACK Button ....................................................................... 26
Viewfinder: Shooting ................................................................. 26
LCD Monitor: Shooting ............................................................. 26
Customizing the Standard Display ...................................... 27
Viewfinder/LCD Monitor: Playback ...................................... 28
Table of Contents
Basic Photography and Playback
More on Photography and Playback
Taking Photographs ....................................................................... 29
Viewing Pictures .............................................................................. 31
Viewing Pictures Full Frame....................................................... 31
Viewing Photo Information ....................................................... 32
Playback Zoom ............................................................................... 33
Multi-Frame Playback................................................................... 34
Deleting Pictures ............................................................................. 35
Using the Flash ................................................................................. 36
Mode Selection................................................................................. 46
P, S, A, and M Modes ..................................................................... 46
Program AE (P) ............................................................................. 47
Shutter-Priority AE (S)................................................................ 48
Aperture-Priority AE (A)............................................................ 49
Manual Exposure (M)................................................................. 50
Auto Modes ...................................................................................... 51
S ADVANCED SR AUTO ......................................................... 52
Long Time-Exposures (T/B) ......................................................... 53
Time (T) .............................................................................................. 53
Bulb (B) ............................................................................................... 53
Using a Remote Release .............................................................. 54
Exposure Compensation .............................................................. 55
Focus/Exposure Lock ..................................................................... 56
Metering .............................................................................................. 58
Film Simulation ................................................................................ 59
The DRIVE Button ............................................................................ 60
Continuous Shooting (Burst Mode)........................................ 61
Bracketing ......................................................................................... 62
Panoramas ........................................................................................ 63
Viewing Panoramas ...................................................................... 65
Multiple Exposures ........................................................................ 66
Advanced Filter ............................................................................... 67
Basic Movie Recording and Playback
Recording Movies............................................................................ 38
Using an External Microphone ................................................. 39
Viewing Movies ................................................................................ 40
The Q (Quick Menu) Button
Using the Q Button ......................................................................... 41
The Quick Menu Display ............................................................. 41
Viewing and Changing Settings .............................................. 42
Editing the Quick Menu .............................................................. 43
The Fn (Function) Buttons
Using the Function Buttons ........................................................ 44
Assigning Roles to the Function Buttons ............................. 45
xiii
Table of Contents
Focus Mode ........................................................................................ 68
The Focus Indicator .................................................................... 69
MF Assist ......................................................................................... 70
Autofocus Options (AF Mode) .................................................. 71
Focus-Point Selection................................................................... 72
Single Point AF ............................................................................. 72
Zone AF ........................................................................................... 73
Tracking (Focus Mode C Only) ................................................ 74
Sensitivity ........................................................................................... 75
AUTO ................................................................................................ 76
Recording Pictures in RAW Format ......................................... 77
Creating JPEG Copies of RAW Pictures .................................. 78
Using the Self-Timer ....................................................................... 79
Interval Timer Photography ....................................................... 81
White Balance ................................................................................... 82
Saving Settings................................................................................. 84
Using a Mount Adapter ................................................................ 85
Mount Adapter Settings.............................................................. 85
Choosing a Focal Length ......................................................... 85
Distortion Correction ................................................................ 85
Color Shading Correction ........................................................ 86
Peripheral Illumination Correction ...................................... 86
PhotoBook Assist............................................................................. 87
Creating a PhotoBook .................................................................. 87
Viewing Photobooks .................................................................... 88
Editing and Deleting Photobooks........................................... 88
Image Search ..................................................................................... 89
xiv
Menus
Using the Menus: Shooting Mode ........................................... 90
Shooting Menu Options (Photographs) ............................... 90
d ADVANCED FILTER................................................................ 90
A SCENE POSITION ................................................................... 90
G AUTOFOCUS SETTING ........................................................ 90
N ISO .............................................................................................. 92
O IMAGE SIZE.............................................................................. 93
T IMAGE QUALITY .................................................................... 93
U DYNAMIC RANGE.................................................................. 93
P FILM SIMULATION ................................................................ 93
B SELF-TIMER.............................................................................. 94
o INTERVAL TIMER SHOOTING ............................................ 94
D WHITE BALANCE ................................................................... 94
f COLOR ....................................................................................... 94
q SHARPNESS............................................................................. 94
r HIGHLIGHT TONE .................................................................. 94
s SHADOW TONE ..................................................................... 94
h NOISE REDUCTION............................................................... 94
K LONG EXPOSURE NR ........................................................... 94
j LENS MODULATION OPTIMIZER ..................................... 94
u SELECT CUSTOM SETTING ................................................ 95
K EDIT/SAVE CUSTOM SETTING .......................................... 95
l MOUNT ADAPTOR SETTING ............................................. 95
m SHOOT WITHOUT LENS ...................................................... 95
c MF ASSIST ................................................................................ 95
v AE/AF-LOCK MODE .............................................................. 95
d AF-LOCK BUTTON................................................................. 95
C PHOTOMETRY ........................................................................ 95
v INTERLOCK SPOT AE & FOCUS AREA ............................ 95
p FLASH SET-UP ........................................................................ 96
W MOVIE SET-UP ........................................................................ 96
Table of Contents
X FILM SIMULATION BKT ....................................................... 96
L IS MODE ................................................................................... 97
r WIRELESS COMMUNICATION ........................................... 97
e APERTURE SETTING ............................................................. 97
x SHUTTER TYPE ....................................................................... 98
Using the Menus: Playback Mode............................................ 99
Playback Menu Options .............................................................. 99
r WIRELESS COMMUNICATION ........................................... 99
j RAW CONVERSION ............................................................... 99
A ERASE ........................................................................................ 99
G CROP........................................................................................100
e RESIZE .....................................................................................100
D PROTECT ................................................................................101
C IMAGE ROTATE .....................................................................101
B RED EYE REMOVAL .............................................................102
I SLIDE SHOW .........................................................................102
m PHOTOBOOK ASSIST .........................................................103
j MARK FOR UPLOAD TO ....................................................103
b IMAGE SEARCH ....................................................................103
s PC AUTO SAVE .....................................................................104
K PRINT ORDER (DPOF) ........................................................104
V instax PRINTER PRINT........................................................104
J DISP ASPECT.........................................................................104
The Setup Menu .............................................................................105
Using the Setup Menu ...............................................................105
Setup Menu Options ..................................................................106
F DATE/TIME .............................................................................106
N TIME DIFFERENCE ...............................................................106
Q a ..............................................................................106
R RESET.......................................................................................106
o SOUND & FLASH .................................................................106
b SOUND SET-UP ....................................................................107
A SCREEN SET-UP....................................................................107
A SCREEN SET-UP (Continued) ..........................................108
h BUTTON/DIAL SETTING....................................................109
I FOCUS RING..........................................................................109
Z POWER MANAGEMENT ....................................................109
V SENSOR CLEANING ............................................................110
t SAVE DATA SET-UP .............................................................110
J COLOR SPACE .......................................................................111
u EVF/LCD SETTING ...............................................................111
r CONNECTION SETTING ....................................................112
K FORMAT..................................................................................113
Factory Defaults .............................................................................114
xv
Table of Contents
xvi
Connections
Technical Notes
Wireless Transfer ............................................................................117
Wireless Connections: Smartphones ...................................117
Wireless Connections: Computers ........................................117
Viewing Pictures on a Computer ............................................118
Windows ..........................................................................................118
Macintosh .......................................................................................118
Connecting the Camera ............................................................119
Printing Pictures via USB ...........................................................121
Connecting the Camera ............................................................121
Printing Selected Pictures ........................................................121
Printing the DPOF Print Order ................................................122
Creating a DPOF Print Order....................................................123
WITH DATE s/ WITHOUT DATE ..........................................124
RESET ALL.....................................................................................125
instax SHARE Printers ..................................................................126
Establishing a Connection........................................................126
Printing Pictures ...........................................................................127
Viewing Pictures on TV ...............................................................128
Optional Accessories....................................................................129
Accessories from FUJIFILM .......................................................129
Connecting the Camera to Other Devices .........................132
Caring for the Camera .................................................................133
Storage and Use ...........................................................................133
Traveling ..........................................................................................133
Cleaning the Image Sensor .......................................................134
Troubleshooting
Problems and Solutions .............................................................135
Warning Messages and Displays ............................................140
Appendix
Memory Card Capacity ...............................................................143
Links.....................................................................................................144
FUJIFILM X-E2S Product Information ...................................144
Firmware Updates .......................................................................144
Free FUJIFILM Apps .....................................................................144
Specifications ..................................................................................145
Restrictions on Camera Settings ............................................151
Before You Begin
Symbols and Conventions
Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may
be simplified for explanatory purposes.
Supplied Accessories
Before You Begin
The following symbols are used in this manual:
Q This information should be read before use to ensure correct operation.
R Additional information that may be helpful when using the camera.
POther pages in this manual on which related information may be found.
The following items are included with the camera:
NP-W126 rechargeable battery
Clip attaching tool
BC-W126 battery charger
Metal strap clips (× 2)
Body cap
• Protective covers (× 2)
• Shoulder strap
• Owner’s Manual (this manual)
R If you purchased a lens kit, check that a lens is included.
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Parts of the Camera
Shutter button ................................................ 30
Exposure compensation dial ........................... 55
Shutter speed dial ..........................47, 48, 49, 50
Hot shoe...................................................37, 132
Flash ............................................................... 36
Strap eyelet ..................................................... 13
Connector cover .......................54, 000, 121, 128
Focus mode selector..................................000 68
Lens signal contacts ........................................ 10
Lens release button ......................................... 15
Microphone..................................................... 38
AF-assist illuminator ..................................... 000
Self-timer lamp............................................... 79
ON/OFF switch ............................................... 21
Function button (Fn7) .................................. 000
Movie-record button ....................................... 38
Wi-Fi button (playback mode)...................... 117
Battery chamber ............................................. 17
Memory card slot ............................................ 18
Battery latch ................................................... 17
Electronic viewfinder (EVF) ............................. 24
LCD monitor .................................................... 24
Command dial................................................... 5
Speaker ........................................................... 40
Cable channel cover for DC coupler
Battery-chamber cover ................................... 17
Battery-chamber cover latch ........................... 17
Tripod mount
Micro USB connector .........................54, 000 121
HDMI mini connector .................................... 128
Microphone/remote release connector ......39, 54
Body cap ......................................................... 15
Diopter adjustment control ............................. 25
Eye sensor ....................................................... 24
N (flash pop-up) button ................................. 36
Q (quick menu) button * .................................. 41
Quick menu edit/custom settings button
(press and hold) *........................................41, 84
RAW conversion button (playback mode) ....... 78
h Indicator lamp................................................... 4
i AF-L (focus lock) button.......................68, 56, 95
j AE-L (exposure lock) button...................... 56, 95
k MENU/OK button ............................................. 5
X (control lock) button (press and hold) ......... 4
l Function button (Fn3—Fn6)....................... 000
Selector ............................................................. 5
m DISP (display)/BACK button........................... 26
n Function button (Fn2) .................................. 000
AUTO (auto mode) button ............................ 000
b (delete) button (playback mode) ............... 35
o Function button (Fn1) .................................. 000
AE (autoexposure) button ............................... 58
n (playback zoom out) button .................33, 34
p DRIVE button ......................... 38, 61, 63, 66, 67
k (playback zoom in) button ...................33, 34
q a (playback) button..................................... 31
Before You Begin
* In shooting mode, press and release to display quick menu or press and hold to display quick menu edit options. When quick
menu is displayed, press and hold to edit custom settings.
Parts of the Camera
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Glows green
Blinks green
Blinks green and orange
Glows orange
Blinks orange
Blinks red
Indicator lamp
Camera status
Focus locked.
Blur, focus, or exposure warning. Picture can be taken.
Recording pictures. Additional pictures can be taken.
Recording pictures. No additional pictures can be taken at this time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
R Warnings may also appear in the display (P 140).
R The indicator lamp remains off while the viewfinder is in use (P 24).
Control Lock
To prevent accidental operation of the selector and AE-L and AF-L buttons during shooting, press MENU/OK until
X is displayed. The controls can be unlocked by pressing MENU/OK until X is no longer displayed.
Parts of the Camera
The Command Dial
Rotate the command dial to select options in the quick menu display
(P 000), view pictures (P 000), adjust the size
of the focus area (P 000), or choose a shutter
speed (P 000, 000, 000, 000, 000) or combination of shutter speed and aperture (program shift,
P 000).
Before You Begin
The Selector
Press the selector up (q),
right (e), down (r), or left
(w) to highlight items. The
up, left, right, and down buttons also double as the Fn3
(AF mode; P 000), Fn4 (film
simulation; P 000), Fn5 (flash
mode; P 000), and Fn6 (focus-frame selection;
P 000) buttons, respectively (P 000).
Press the center of the command dial to
zoom in on the active focus area during shooting (P 000) or playback (P 000), or
press and hold the center of the command dial
to choose a manual focus assist option (P 000).
Parts of the Camera
The AUTO (Auto Mode) Button
Press a function button (by default, Fn2/AUTO) button to select S ADVANCED SR AUTO mode or an
auto mode in which you can choose the scene. Press the button again to exit auto mode.
Q AUTO is displayed in red when auto mode
is selected.
R At default settings, AUTO MODE ON/OFF is assigned to the AUTO (Fn2) button, but it can be assigned to other
function buttons as desired (P 000).
R The options available vary with the shooting mode and shooting conditions. See “Restrictions on Camera Settings” (P 000) for more information.
Parts of the Camera
■ Shooting: Viewfinder/LCD Monitor
4000
5.6
Before You Begin
Camera Displays
The following types of indicator may be displayed during shooting and playback. In the description
that follows, all available indicators are shown for illustrative purposes; the indicators actually displayed
vary with camera settings. Note that the LCD monitor and electronic viewfinder have different aspect
ratios.
400
Parts of the Camera
A Focus check.....................................................000
B Depth-of-field preview .....................................49
C Location data download status .......................000
D Movie mode....................................................000
E Time remaining ..............................................000
F Number of available frames............................143
G Image quality and size ......................................93
H Date and time .................................................000
I Focus frame ......................................................56
J White balance...................................................82
K Film simulation.................................................59
L Dynamic range .................................................93
M Focus warning .................................... 4, 137, 140
N Temperature warning .....................................142
O Control lock.........................................................4
P Sound and flash indicator ...............................106
Q Histogram.........................................................28
R Distance indicator .............................................68
S Battery level .....................................................21
T Sensitivity.........................................................75
U Exposure compensation/exposure indicator
Z Shooting mode ...............................................000
a Focus indicator..................................................69
b Manual focus indicator ...................................000
c Focus mode ......................................................68
d AF+MF indicator ............................................000
e Shutter type....................................................000
f Continuous mode .............................................61
g Self-timer indicator ..........................................79
................................................................... 50, 55 h Microphone/remote release ............... 39, 54, 000
V Aperture ............................................... 47, 49, 50 i Flash mode .......................................................36
Flash compensation ........................................000
W Shutter speed ....................................... 47, 48, 50
X AE lock indicator .............................................000 j Virtual horizon ................................................000
Y Metering...........................................................58
* Shows “9999” if there is space for over 9999 frames.
Control Lock
Pressing a locked control ((P
P 4) displays a X icon.
Parts of the Camera
■ Playback
1/4000
A Date and time .................................................000
B Intelligent face detection indicator .................000
C Red-eye removal indicator..............................102
D Advanced filter .................................................67
E Location data ..................................................000
F Protected image .............................................101
G Sound and flash indicator ...............................106
H Frame number ................................................000
5.6
100-0001
Before You Begin
12/31/2050 10:00 AM
400
I Gift image.........................................................31
J Photobook assist indicator ................................87
K DPOF print indicator .......................................123
L Battery level .....................................................21
M Image quality and size ......................................93
N Film simulation.................................................59
O Dynamic range .................................................93
P White balance...................................................82
Q Sensitivity.........................................................75
R Exposure compensation ....................................50
S Aperture ............................................... 47, 49, 50
T Shutter speed ....................................... 47, 48, 50
U Playback mode indicator...................................31
V Movie icon ......................................................000
W Mark for upload to ..........................................103
X Rating ...............................................................31
Lenses
The camera can be used with lenses for the FUJIFILM X-mount.
Parts of the Lens
Removing the Caps
Remove the caps as shown.
Q Lens caps may differ from those shown.
10
Lens hood
Mounting marks
Focus ring
Zoom ring
Aperture ring
O.I.S. switch
Aperture mode switch
Lens signal contacts
Front lens cap
Rear lens cap
Attaching the Hood
When attached, lens hoods reduce glare and protect the front lens element.
Lenses
Aperture ring
A 16 11 8 5.6 4 2.8
A 16 11 8 5.6 4
Lenses with No Aperture Rings
The method used to adjust aperture can be selected using the e APERTURE SETTING option
(P 97) in the shooting menu. When an option
other than AUTO is selected, aperture can be adjusted using the command dial.
The Aperture Mode Switch
If the lens has an aperture mode switch, aperture can
be adjusted manually by sliding the switch to Z and
rotating the aperture ring.
Before You Begin
Lenses with Aperture Rings
At settings other than A, you
can adjust aperture by rotating
the lens aperture ring (exposure modes A and M).
Aperture ring
Aperture mode switch
R Selecting S.S for h BUTTON/DIAL SETTING >
COMMAND DIAL SETTING (P 000) allows the
command dial to be used to choose the shutter
speed (P 000, 000, 000, 000), the exposure time for
long time-exposures when the shutter-speed dial is
rotated to T (time), or, in program AE mode (mode
P), different combinations of shutter speed and aperture (program shift, P 000).
R Assigning COMMAND DIAL SETTING to a function button makes it easy to switch between shutter
speed and aperture (P 000).
11
Lenses
Lenses with O.I.S. Switches
If the lens supports optical image stabilization
(O.I.S.), the image stabilization mode can be chosen in the camera menus. To activate image stabilization, slide the switch to ON.
Manual Focus Lenses
Slide the focus ring to the front for
autofocus.
For manual focus, slide the focus ring
to the back and rotate it while checking the results in the camera display.
The focus distance and depth-of-field
indicators can be used to assist manual
focus. Note that manual focus may not
be available in all shooting modes.
O.I.S. switch
The Depth-of-Field Indicator
The depth-of-field indicator shows the approximate
depth of field (the distance in front of and behind the
focus point that appears to be in focus).
Distance
indicator
Q The camera does not display the focus distance when
the lens is in manual focus mode.
12
First Steps
Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
1 Open a strap clip.
3 Pass the clip through the eyelet.
Rotate the clip fully through
the eyelet until it clicks
closed.
4 Attach a protective cover.
Q Keep the tool in a safe place. You will need it to
open the strap clips when removing the strap.
First Steps
Use the clip attaching tool to open a strap clip,
making sure that the tool and clip are in the
orientations shown.
Place a protective cover over the eyelet as
shown, with the black side of the cover toward
the camera. Repeat Steps 1–4 for the second
eyelet.
2 Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening. Remove the tool, using the other hand to keep
the clip in place.
13
Attaching the Strap
5 Insert the strap.
Insert the strap through a protective cover
and strap clip.
6 Fasten the strap.
Fasten the strap as shown. Repeat Steps 5–6
for the second eyelet.
Q To avoid dropping the camera, be sure the strap is
correctly secured.
14
Attaching a Lens
Lenses attach as described below.
Q Care is required to prevent dust entering the camera while attaching and removing lenses.
1 Remove the body and rear caps.
Remove the body cap from the camera and
the rear cap from the lens.
Lens release button
Q Do not touch the camera’s internal parts.
2 Attach the lens.
Place the lens on mount, keeping the marks
on the lens and camera aligned, and then rotate the lens until it clicks into place.
First Steps
Removing Lenses
To remove the lens, turn the
camera off, then press the lens
release button and rotate the
lens as shown.
Q To prevent dust accumulating on the lens or inside the
camera, replace the lens caps and camera body cap
when the lens is not attached.
Lenses and Other Optional Accessories
The camera can be used with lenses for the FUJIFILM
X-mount and the other accessories listed from page
129.
Q Do not press the lens release button while attaching the lens.
15
Charging the Battery
The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger.
1 Place the battery in the charger.
Place the battery in the supplied battery charger as shown.
Charge lamp
Battery charger
2 Plug the charger in.
Plug the charger into an indoor power outlet.
The charging indicator will light.
The Charging Indicator
The charging indicator shows battery charge status as follows:
Charging
indicator
Arrow
On
Battery not
inserted.
Battery fully
charged.
Battery charging.
Blinks
Battery fault.
Off
Battery
The camera uses an NP-W126 rechargeable battery.
R The supplied AC cord is for use exclusively with
the supplied battery charger. Do not use the
supplied charger with other cords or the supplied cord with other devices.
Battery status
Action
Insert the battery.
Remove the battery.
—
Unplug the charger
and remove the
battery.
3 Charge the battery.
Remove the battery when charging is complete. See the specifications (P 149) for charging times (note that charging times increase
at low temperatures).
Q Unplug the charger when it is not in use.
16
Inserting the Battery and a Memory Card
The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC
memory cards (sold separately). After charging the battery, insert the battery and memory card as
described below.
1 Open the battery-chamber cover.
2 Insert the battery.
Using the battery to keep the battery latch
pressed to one side, insert the battery contacts first in the direction shown by the arrow.
Confirm that the battery is securely latched.
Arrow
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this precaution could damage image files or memory cards.
Q Do not use excessive force when handling the
battery-chamber cover.
First Steps
Slide the battery-chamber latch as shown and
open the battery-chamber cover.
Battery latch
Q Insert the battery in the correct orientation. Do
not use force or attempt to insert the battery upside down or backwards. The battery will slide in
easily in the correct orientation.
17
Inserting the Battery and a Memory Card
3 Insert the memory card.
4 Close the battery-chamber cover.
Holding the memory card in the orientation
shown, slide it in until it clicks into place at the
back of the slot.
Click
Q Be sure card is in the correct orientation; do not
insert at an angle or use force.
Q SD/SDHC/SDXC memory cards can be locked,
making it impossible to
format the card or to Write-protect switch
record or delete images.
Before inserting a memory card, slide the writeprotect switch to the unlocked position.
18
Inserting the Battery and a Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn
the camera off and open the battery-chamber cover.
Battery latch
To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory card
is removed, the card could be
ejected too quickly. Use your
finger to hold it and gently release the card.
First Steps
To remove the battery, press
the battery latch to the side,
and slide the battery out of
the camera as shown.
Q Batteries
• Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
• Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could
overheat.
• Read the cautions in “The Battery and Power Supply”
(P v).
• Use only battery chargers designated for use with the
battery. Failure to observe this precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt
to split or peel the outer casing.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
19
Inserting the Battery and a Memory Card
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_
cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q Memory Cards
• Do not turn the camera off or remove the memory card while the memory card is being formatted or data are
being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
• Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 113.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card
may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do
not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a H card or
better for movies and burst photography.
• Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete
this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to
delete pictures; before editing or renaming files, copy them to a computer and edit or rename the copies, not
the originals. Renaming the files on the camera can cause problems during playback.
20
Turning the Camera on and Off
Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn
the camera off.
Q Fingerprints and other marks on the lens or viewfinder can affect pictures or the view through the viewfinder.
Keep the lens and viewfinder clean.
First Steps
R Press the a button to start playback. Press the shutter button halfway to
return to shooting mode.
R The camera will turn off automatically if no operations are performed for the
length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF (P 109). To reactivate the camera
after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then
back to ON.
R For information on startup options, see page 109.
Battery Level
After turning the camera on, check the battery level in the display.
Indicator
O (white)
M (white)
K (white)
J (red)
A (blinks red)
Description
Battery partially discharged.
Battery about two-thirds charged.
Battery about one-third charged. Charge as soon as possible.
Low battery. Charge battery.
Battery exhausted. Turn camera off and recharge battery.
21
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (you can reset the clock or change languages at any time using the F DATE/TIME
or Q a options in the setup menu; for information on displaying the setup menu, see page 106).
1 Choose a language.
Highlight a language and press MENU/OK.
START MENU
ENGLISH
R Press DISP/BACK to skip the current step. Any steps you skip will be displayed the next time the camera is turned on.
FRANCAIS
DEUTSCH
SET
NO
2 Set the date and time.
DATE/TIME NOT SET
2018
2017
YY. MM. DD
2016
2015
2014
SET
NO
1. 1 12 : 00
AM
Press the selector left or right to highlight the year, month, day, hour,
or minute and press up or down to change. To change the order in
which the year, month, and day are displayed, highlight the date format and press the selector up or down. Press MENU/OK to exit to shooting mode when settings are complete.
R If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.
22
Basic Setup
Changing Basic Settings
To change the language or reset the clock:
1 Display the desired option.
Display the setup menu and select Q a to change the language or F DATE/TIME to
reset the clock (P 105).
To choose a language, highlight the desired option and press MENU/OK. To set the clock, press the
selector left or right to highlight the year, month, day, hour, or minute and press up or down to
change, then press MENU/OK once the clock has been set to your satisfaction.
First Steps
2 Adjust settings.
23
Choosing a Display
The camera is equipped with an electronic viewfinder (EVF) and an LCD monitor (LCD). Follow the
steps below to choose a display.
1 Display the setup menu.
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector left to highlight
the tab for the current menu.
1.3 Press the selector down to highlight the setup menu tab containing u EVF/LCD SETTING.
1.4 Press the selector right to place
the cursor in the setup menu.
2 Select u EVF/LCD SETTING.
Highlight u EVF/LCD SETTING
and press MENU/OK.
3 Choose a display.
Highlight one of the following options and press MENU/OK.
Option
Description
Automatic
E EYE
display selection
SENSOR
using eye sensor
LCD
LCD monitor
only
EVF
Viewfinder only
EVF
LCD
LCD
EVF
Viewfinder only;
EVF ONLY
eye sensor turns
+E
display on or off
EVF
The Eye Sensor
The eye sensor turns the viewfinder on when you put your eye to the viewfinder and turns
it off when you take your eye away (note that the eye sensor may respond to objects other
than your eye or to light shining directly on the sensor). If automatic display selection is
enabled, the LCD monitor will turn on when the viewfinder turns off.
24
Eye sensor
Choosing a Display
The Viewfinder Display
When ON is selected for A SCREEN SET-UP >
EVF AUTOROTATE DISPLAYS in the setup
menu (P 000), the indicators in the viewfinder
automatically rotate to match camera orientation.
4000
5.6
First Steps
Focusing the Viewfinder
The camera is equipped with diopter adjustment
in the range –4 to +2 m–1 to accommodate individual differences in vision. Rotate the diopter
adjustment control until the viewfinder display is
in sharp focus.
400
Orientation changed from “wide” to “tall”
Diopter adjustment control
4000
5.6
400
Q The display in the LCD monitor is unaffected.
Adjusting Display Brightness
The brightness of the viewfinder and LCD monitor can be adjusted using the options under
A SCREEN SET-UP. Choose EVF BRIGHTNESS
to adjust viewfinder brightness (P 000) or LCD
BRIGHTNESS to do the same for the LCD monitor
(P 000).
25

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : S01-01
Create Date                     : 2015:12:10 20:47:32+08:00
Modify Date                     : 2015:12:10 20:47:38+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:12:10 20:47:38+08:00
Creator Tool                    : Adobe InDesign CS4_J (6.0.6)
Format                          : application/pdf
Title                           : $00 LX22_OM_200-EN.indb
Creator                         : S01-01
Document ID                     : uuid:6f890598-d2fd-4834-9534-8fcb1e82a6ec
Instance ID                     : uuid:632a28f9-103f-4e9b-8c3a-70ffe8c8af1c
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Page Count                      : 41

EXIF Metadata provided by EXIF.tools

Fuji Film 02000002 Wireless LAN Module User Manual 00 LX22 OM 200 EN indb

Fuji Film Corporation Wireless LAN Module 00 LX22 OM 200 EN indb

Contents

[STC]User Manual_Part I

FCC ID Filing: W2Z-02000002

Navigation menu

Namespaces

Views

Navigation