Fujitsu OS-F905I Cellular Phone User Manual F905i
Fujitsu Limited Cellular Phone F905i
UserManual.wiki
>
Fujitsu
>
OS-F905I User Manual
>
Manual 1 2
Contents
1.
Manual Part 1 1
2.
Manual Part 1 2
3.
Manual Part 1 3
4.
Manual Part 1 4
5.
Manual Part 1 5
6.
Manual Part 1 6
7.
Manual Part 2
8.
Manual Part 3
9.
Manual 1 1
10.
Manual 1 2
11.
Manual 1 3
12.
Manual 1 4
13.
Manual 1 5
14.
Manual 1 6
15.
Manual 2
16.
Manual 3
Manual 1 2
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![35Before Using the HandsetF905i_E2kou•When attaching the fully charged battery pack to the terminal and connecting it to the AC adapter, the light may turn on for a moment and turn off. This is normal and not a malfunction.•During a call or a communication, in Silent mode or with Charge alert "OFF", the charge alert does not sound at start or completion of charge.Remaining battery levelChecking remaining battery levelA battery icon appearing on the top of the display shows an approximate remaining battery level.(Battery level 3) : Ample charge(Battery level 2) : Low charge.(Battery level 1) : Battery level very low. Charging required❖When battery is almost exhaustedA message indicating low battery appears on the display. Pressing any one of g, c, f keys deletes the message temporarily. After a period of time, a battery alarm sounds from the speaker and all icons on the top of the display start blinking. The power is turned off after approximately 1 minute. These operations stop when charging starts; press f to immediately stop the battery alarm.•During a call, the message remains displayed and the battery alarm keeps sounding from the earpiece. After approximately 20 seconds, the call is terminated, the battery alarm sounds from the speaker and all icons on the top of the display blink. ◆Checking remaining battery level by sound and display <Battery level>1me8763The battery level appears and the keypad sound (➝P90) is emitted depending on the battery level. After a while, the screen returns to the menu list.Power ON/OFFTurning power ON/OFF❖Turning power ON1f (2 sec. or more)❖Turning power OFF1f (2 sec. or more)◆Operations to perform after turning the power ON for the first timeWhen turning the power ON for the first time, operate in the order of "AdvancedMode setting" ➝ "Initial setting". The settings made can be changed later.❖Default settingMENU [Settings & NW services] 779•Always set Password. When p or c, f is pressed before setting terminal security code, a confirmation screen appears asking you to exit. If you exit by selecting "Yes", this confirmation screen reappears when the power is turned ON the next time.1Set the required items on the initial setting screenepDate & time : Set the date and time.➝P40Password : Change the terminal security code, after performing authentication.➝P107Fingerprint : After performing authentication, register a fingerprint to be used for authentication.➝P109Keypad sound : Set a confirmation sound to be generated when a key is pressed.➝P90Text size : Specify size of characters for Phonebook or mail.➝P103Select languageSwitching to English1me[Settings & NW services]e272e1 or 2Battery iconStand-by displaySignal level iconIconReceived signal levelOutside the service area and where radio waves are hard to reachStrong WeakF905i.book Page 35 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-3.png)
![36 Before Using the HandsetF905i_E2kou✔INFORMATION•The setting of Select language are saved to UIM. When a UIM is replaced, the setting switches to that saved in the inserted UIM.•Even if this setting is set to "English", the displayed menu may not be switched to English depending on the Kisekae Tool. Note that, when a Kisekae Tool in "Preinstalled" folder is set, a menu dedicated to "English" appears.Date & timeSetting date and time1me[Settings & NW services]e721eSet the required itemsepInfomationWhen you are setting the time and date, change the network to GSM to set up the time automatically. The following shows how to change the NW. •me[Settings & NW services]e92eSelect GSMIf network is not GSM, change the Automatic Time/Time-Difference Correction to "OFF" and set up manually. ✔INFORMATIONAfter setting the date and time with Auto time adjust set to "OFF", removing the battery pack or leaving it exhausted for a long time may cause the date and time to be deleted. In this case, set the date and time again after charging the battery.User informationChecking your own phone numberMENU [Phonebook & Logs] 9You can check your phone number (My phone number), Name, Mail address, etc.1me[User information]Check during a call, etc. : s0F905i.book Page 36 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-4.png)
![39Voice/Videophone CallsF905i_E2kou✔INFORMATION<For videophone calls only>•The charges are based on the rate for digital communication not for voice calls even when substitute image is sent instead of the camera image.•Any videophone call from the terminal to emergency call (112) with Auto redial as voice set to "ON" is automatically switched to a voice call.◆Putting calls on hold <On hold>Putting the call on hold during a call lets you talk to someone without the caller hearing your voice.•The caller is charged for time spent on hold.1During a call, g.•To clear voice call on hold, press g or n.•To clear videophone call on hold, perform any of the operations below : g : Redisplay the image sent before the call is put on holdt/n : Camera image is senta : Substitute image is sent◆Using speakerphone functionTo make/receive videophone calls without using Speakerphone, change the setting of Speakerphone in Operation (Videophone settings).1Enter a phone numberen (1 sec. or more) or t appears at the top of the display.•The procedure is the same when operating from the phonebook, Redial, Received calls, Recorded messages or Voice memos.•Press and hold t for 1 second or more to make a videophone call using speakerphone function with Speakerphone in Operation (Videophone settings) set to "OFF".•While making a call, ringing or talking on the phone, you can switch the speakerphone function ON/OFF by each pressing n.◆Adjust Listen volume during a call <Listen volume>•The Listen volume adjusted during a call is reflected to "Listen volume" of Adjust volume.1j or side keys [▲▼] during a voice call•Volume can be adjusted only by side keys [▲▼] during a videophone call.◆Using Voice clear/Voice slowing❖Switching Voice clearMeasure the noise level during a voice call, and if the noise increases above the specified level, the other party's voice is automatically emphasized to be heard clearly. And, the volume is automatically increased also when your or other party's voice is low.•This item is set to "ON" by default.•This function does not operate while using Speakerphone function or in GSM/GPRS network.•The settings are retained after a call.1During a voice call, me7If you set Voice clear to ON, appears. When this does not operate with ON, it is displayed in gray.❖Switching Voice slowingDuring a voice call, adjust the other party's voice to be heard slowly by using the silence at intervals, to make it easier to be heard. When the other party speaks without intervals, the voice is heard at the normal speed.•This item is set to "OFF" by default.•If you set Voice slowing to ON, the quality of the other party’s voice, music or time tone may change. In such a case, set Voice slowing to OFF.•This function does not operate in overseas GSM/GPRS network.•The settings are canceled after a call.1During a call, a.If you set Voice slowing to ON, appears. When this does not operate with ON, it is displayed in gray.Redial/Received callsMaking a call using Redial/Received callsMENU [Phonebook & Logs] 6MENU [Phonebook & Logs] 5This function records call log (Redial) and Received calls of voice/videophone calls.•Up to 30 calls are recorded in each of Redial and Received calls. If the maximum number of saved items is exceeded, record is overwritten chronologically.F905i.book Page 39 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-7.png)
![43Voice/Videophone CallsF905i_E2kouSub addressMaking a call specifying a sub addressYou can set if you call a specific phone or communication device by specifying a sub address.•A sub address is a number used to call a specific device out of multiple telephone sets and/or communication devices assigned the same phone number (e.g. when multiple devices with sub addresses are connected to an ISDN line).It is also used to select contents in a movie delivery service "V live".1me[Settings & NW services]e563e1 or 2❖Making a call specifying a sub address1Enter a phone numbere*eEnter a sub addressen or tNoise reductionSuppressing ambient noise to improve call qualityBy setting the noise canceller function that suppresses the ambient noise, your voice and the other party's voice can be made clearer.•It is recommended that this function be used set to "ON" normally.1me[Settings & NW services]e571e1 or 2Receiving voice/vi deophone callsReceiving voice/videophone calls1A call is received.j : Ring alert volumeSide key [▲] : Stop the ring tone and the vibrator operationWhen the other party does not notify caller IDReason for hiding caller ID is displayed.User unset : When the caller selected not to send caller IDPayphone : When the call was made from a payphone, etc.Unavailable : The call was made under the situation that does not allow sending the caller ID; e.g. a call from overseas or a general subscriber phone via forwarding services (caller ID may be sent by connecting phone companies).2Select call reception type.Receiving a voice call : n•Voice calls can be answered also by pressing g or a keypad (Any key answer).Receiving videophone calls : n or tYour own image is displayed while the videophone call is connected.•Any key answer is unavailable.•A switching confirmation screen to speaker appears during Silent mode.•You can answer a videophone call using a substitute image set in Image setting (Videophone image) by pressing a instead of n or t. The substitute image is sent to the other party when the videophone call is connected.3When ending the call, f.◆Operations from submenu during receiving callWhen there is an incoming voice or videophone call, the operations listed below can be performed from submenu.When Arrival call act is "Answer", the same operations are enabled also when there is another incoming voice call during a voice session.◆When you hear beeps (call waiting ring tone) while talking over a voice callIf you are a subscriber to Voice Mail service, Call waiting or Call forwarding service, you hear beeps (the call waiting ring tone) when receiving another incoming voice call while talking over a voice call. You can perform any of the operations below : *Selection from the submenu is enabled only when Arrival call act is "Answer".Submenu item Operationa Call RejectionDisconnect without receiving a callService OperationCatch Phone (Call waiting service)Put current voice call on hold and answers second voice callF905i.book Page 43 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-11.png)
![44 Voice/Videophone CallsF905i_E2kouAny key answerEnabling use of keypad to answer callYou can set if you answer a call by pressing 0-9, g, * or # in addition to n.•The any key answer function is effective for a voice call. It is unavailable to an incoming call during talking.1me[Settings & NW services]e53e1 or 2Close settingsEnding/putting on hold/continuing a call by folding the terminal•This function does not operate during 64K data communication, packet communication.1me[Settings & NW services]e572e1-3End the call : Terminate the call.On-hold : Put the call on hold.Continue(mute) : Mute the sound without terminating the call. However, when the speakerphone function is active, your voice is not heard by the other party but you hear the other party's voice from the speaker.When you can/could not answer a voice/videophone callRespond and HoldPutting calls on hold when you cannot answer immediately•The caller is charged for the time spent on hold.1While receiving a call, f.The call is put on hold, and the other party hears a status message.For a videophone call, Response hold image for videophone is displayed to you and the other party.2When you are ready to answer the call, n.•You can also answer a videophone call by pressing t. A substitute image is sent to the other party by pressing a.•If the caller presses f or hangs up while on hold, the call ends.Status messageSetting status messageYou can record a status message in your own voice.•1 message approximately 10 seconds long can be recorded.•As default On-hold tone, "對不起現在不能接電話，請稍後或稍後在撥。" is saved.1me[Settings & NW services]e1161eSelect the On-hold tone fielde2•Press 1 and go to Step 3 to restore preinstalled guidance.2"Record" in the Edit message fieldeRecord the status message after the beepRecording starts after a message appears.•An end tone (beep) sounds approximately 10 seconds after the start of recording.•Press g to stop recording halfway.•When a recorded status message is deleted, the preinstalled message is reset.•Select "Play" to check the recorded status message.3pAn approximate guide of the time for recordingF905i.book Page 44 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-12.png)
![45Voice/Videophone CallsF905i_E2kouAnswer machineAllowing the caller to record message when you cannot answer callBy activating Answer machine, a greeting message is played and the caller can record a message when you cannot answer the call.•You can record up to 4 voice and videophone calls in total, approximately 30 seconds for each call.◆Activating Answer machineMENU [Phonebook & Logs] 71You can set if you activate Answer machine.•Operate the terminal in open state.1Side key [▲] (1 sec. or more)e1e1 or 2 appears on the stand-by display when Answer machine is activated.❖Responding with Quick answer machine <Quick answer machine>When Answer machine is not active, you can activate it once by pressing and holding side key [▲] for 1 second or more while receiving a call. This operation does not set Answer machine to active.◆Setting the response time before the greeting starts <Greeting msg resp time>MENU [Phonebook & Logs] 713•The default is "13 seconds".1Side key [▲] (1 sec. or more)e13eEnter the response time•Set duration from 0 to 120 seconds.◆Setting the greeting message <Set greeting message>MENU [Phonebook & Logs] 714You can record your own voice as greeting message.•1 message approximately 10 seconds long can be recorded.•As default Greeting message, "對不起現在不能接電話，請廳到P聲響後在30秒鍾内留言。" is saved.1Side key [▲] (1 sec. or more)e14eSelect the Greeting message fielde2•Press 1 to restore preinstalled guidance and go to Step 3.2"Record" in the Edit message fieldeRecord the greeting message after the beepRecording starts after a message appears.Supplementary description of recording message➝P57 Step 2 in "Setting status message"3pPlaying/deleting recorded messagesMENU [Phonebook & Logs] 72◆Playing recorded messages1Side key [▲] (1 sec. or more)e2aStatus icon : Recorded message of voice call (unplayed) : Recorded message of voice call (played) : Recorded message of videophone call (unplayed) : Recorded message of videophone call (played)bReceiving call in overseas (except GMT+08:00)*1cReceiving international calldPhone number*2/name (if saved in the phonebook)/reason for hiding caller IDeDate/time of recording (local time when in overseas) and phone number of party*2/reason for hiding caller ID at cursor position*1This may not appear when, for example, the call recep-tion date/time is not recorded.*2For an international call, a plus sign "+" appears at the beginning of the phone number.2Select a recorded message.•During playing, the operations below are available : j/Side keys [▲▼] : Adjust volumeg : Stopn : Switch the speakerphone function ON/OFF (only when playing voice call message).agfecbdPlaying voice call messagePlaying videophone call messageAn approximate guide of the playing timeF905i.book Page 45 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-13.png)
![46 Voice/Videophone CallsF905i_E2kou•When videophone call message is being played, the speakerphone function is set to ON. Switching the speakerphone function is not available.•When videophone call message is played in Silent mode, a sound playing confirmation screen appears. Select "No" to play the message without sound.Making a call : Place the cursor on the party and n or t•To make a call specifying conditions, press m3.➝P51Adding to phonebook : aPlace the cursor on the party and me4 or 5e1 or 2•When adding data to existing phonebook entry, select the phonebook entry to add.bSave the name or mail address, etc.Phonebook new entry➝P75, 763Select if you delete the recorded message.◆Deleting recorded messages1Side key [▲] (1 sec. or more)e2ePlace the cursor on the recorded messagesme2e1 or 2e"Yes"Videophone call settingsUsing Chara-denDuring a videophone call, a character can be sent instead of camera image.•Displaying Chara-den➝P2891During a call, me421eSelect a foldereSelect a Chara-den•The operations below are available during a videophone call : 1-9, # : Actiona : List actions0 : Stop the actionSetting images to send to the other party during a call1Perform necessary operation during a call.Switching your image and substitute image : t•When Chara-den is set as the substitute image, the Chara-den may not be displayed and the Default image may be sent.Switching in-camera/out-camera*1 : a•This item is set to "In-camera" by default.•Even when the camera is switched, settings of Frames, Shooting mode, Brightness/Flicker adjustment, etc. are kept.Turn on/off the light*2 : a (1 sec. or more)If the light is turned on, the light turns on in white.•Rotating the display weakens the effect of the light.•Light may be temporarily turned off by setting operations, etc. during a call.Switching display magnifications of camera image <Zoom>*1 j•Each time you press u, the zoom scale switches in the order below, and each time you press d, it switches in the opposite order.In-camera : Standard ➝ ×2Out-camera : Standard ➝ 2× ➝ 4× ➝ 6× ➝ 8× ➝10× ➝ 12× ➝ 16וSwitching in-camera and out-camera cancels the zoom.Applying special effects to image <Scene mode/effect>*1 me2e1-4Standard : Standard imageBacklight : Shooting subjects against the lightMonotone : Shooting in monochrome modeSepia : Shoot in sepia modeAdjusting brightness of image*1, *3 : me31eAdjust with hep•This item is set to "Level 3" by default.•You can adjust at 5 levels.Adjusting flicker*1, *3 me32e1-3The flicker may be reduced by selecting the settings that match the power supply frequency of your area.•This item is set to "Auto" by default.•Reflected to the flicker adjustment settings of Camera and Barcode reader.Chara-denF905i.book Page 46 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-14.png)
![47Voice/Videophone CallsF905i_E2kouAdding frame on image*1 me41eSelect frame•Only the frames of 176×144 or smaller can be selected.•While In-camera is used, a mirror image (flip horizontal) is displayed and a normal image (real orientation) is sent to the other party. While Out-camera is used, the image same as on the display is sent to the other party.•Press g to cancel.Sending Camera-Off images me43The substitute image set in Substitute image is sent.•When Chara-den is set as the substitute image, the Default image is sent.Sending still image me44eSelect a foldereSelect a still image•Only still images that are 176×144 or smaller for Image size and permitted to output from the terminal can be set.Images that inhibited to output from the terminal ➝P304 "File restriction" in "List of display items and changeability"•Press g to cancel.Switching to Macro shooting*2 me6You can adjust the focus when sending images of very close objects approximately 8-10 cm away.•Press m6 to cancel.Setting the quality of sending/receiving images me8e1 or 2e1—3Normal : Standard qualityPrefer motion spd : Motions become smoother in a little lower-definition image.Prefer img qual : Motions become a little slower in a higher-definition image.•You can also press h to switch the Sending image quality .*1This item can be set only while sending camera image.*2This item can be set only when using Out-camera.*3The settings are retained after a call.OperationChanging videophone settingsYou can set the operation to be performed when videophone calls fail to get through and the screen to appear during videophone calls.1me[Settings & NW services]e63eSet the required itemsepAuto redial as voice : Set whether to redial a voice call for unsuccessful videophone attempt.Display setting : Set one of the images ("My side" or "Other side") or both of images ("Both sides") to appear while a videophone call.•If you set "My side" or "Other side", Sub screen cannot be set.Sub screen : Set one of the images ("My side" or "Other side") to appear in the sub screen during a videophone call.Screen size : Set the main screen view size.Visual preference : Set quality of an image to be received from the other party.Display light : Set lighting of the display during videophone calls.•If you set "Terminal settings", it depends on settings of Display light of Display.Speakerphone: Set whether to use the speakerphone function at the same time as the videophone call is connected.Image settingSetting substitute and hold images for videophone callsMENU [Settings & NW services] 234You can change the substitute image to be sent during videophone calls, Answer machine image, Response hold image, On-hold image or Movie memo image.◆Setting substitute image<Example> Setting standard Chara-den1me[Settings & NW services]e65e1eSelect the Image field21Setting standard image : 2Setting other Chara-den : 3eSelect the List images fieldeSelect a foldereSelect a Chara-denSetting other still image : 4eSelect the List images fieldeSelect a foldereSelect a still image3p◆Changing image for recording msg/response hold/On-hold/recording movie memo1me[Settings & NW services]e65e2-52Select the Image fielde1 or 2epF905i.book Page 47 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-15.png)
![50 PhonebookF905i_E2kouPhonebooks supported by the termi-nalF905i supports Terminal phonebook and UIM phonebook. You can make voice/videophone call and send mail or SMS from these phonebooks.•Items to be saved in Terminal phonebook and UIM phonebook are as follows : OK: Allowed ✕ : Not allowed*1The entries you can actually add may be less depending on the content of each phonebook entry*2The items you can set are: birthday, note, postal code/address, location information, company name, job title and URL. •Phonebook data saved in your UIM is available even when it is inserted to another terminal.Phonebook new entryAdding entries into Terminal phone-bookYou can add phone numbers and mail addresses to the Terminal phonebook.•Priority of the incoming/outgoing operation➝P96•Maximum number of recorded items➝P741me[Phonebook & Logs]e22Enter a name.•Up to 16 two-byte (32 one-byte) characters can be entered.3Set the required itemsepItem Terminal phonebookSIM card (USIM)phonebookSIM card (SIM) phonebookNumber of entries in the phonebookMaximum 1000 entries *1Maximum 200 entriesMaximum 140 entriesEntry ContentPhonebook No. OK✕✕Name 16 two-byte (32 one-byte) characters 5 two-byte (12 one-byte) characters5 two-byte (12 one-byte) charactersZhuyin 16 Zhuyin (32 one-byte) characters5 Zhuyin (12 one-byte) characters✕Image, MovieOne per person✕✕Group "No group" or 30 groups"No group" or 10 groups✕Phone numberFive numbers per person, maximum of 3005 numbers in the entire phonebook *1One number per personOne number per personPhone numbericonOK✕✕Mail addressFive addresses per person, maximum of 3005 addresses in the entire phonebook *1One address per person ✕Mail address iconOK✕✕Other settings *2OK✕✕F905i.book Page 50 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-18.png)
![51PhonebookF905i_E2kouAlert by contactSetting receiving actions for each phonebook entry•Priority of incoming operation➝P88, 89, 1021peSearch the phonebookePlace the cursor on a phonebook entry to set and me32eSet the required itemseph : Switching Call and Mail screens.Phonebook(UIM) new entryAdding to SIM card phonebook•Maximum number of recorded items➝P741me[Phonebook & Logs]e32Enter a name.•Up to 5 two-byte (12 one-byte) characters can be entered. 3Set the required itemsepGroup settingMaking group settings<Example> Adding groups1me[Phonebook & Logs]e122me2Deleting a group : Place the cursor on the group and me3eAuthenticatee"Yes"•Even in Privacy mode (when Phonebook & Logs is "Hide set contact"), the phonebook entries with secrecy are deleted.•For No group, only the phonebook entry in the group is deleted.Changing a group name : Place the cursor on the group and me4•For UIM phonebook, press p, place the cursor on the group and pressm2.Changing the order of the groups : Place the cursor on the group and me6 or 73Enter the group nameepPhone alert settings screenF905i.book Page 51 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-19.png)
![52 PhonebookF905i_E2kouPhonebook searchMaking calls using phonebook•In Privacy mode (when Phonebook & Logs is "Hide set contact"), the phonebook entries or groups with secrecy cannot be searched. The same applies to Quick dial, Quick mail, Headset quick-dial and Search message.1peSearch the phonebookaIcon set for first entrybNumber of phone numbers and mail addresses saved in entry at the cursor positioncThe first phone number of the party at the cursor positionFor example, if...Name) FujitsuZhuyin)ㄈㄨㄕㄊㄨㄥThen it will be allocated to the "ㄅ" tab.2Place the cursor on the party and n or t❖Using phonebook entriesCreating an i-mode mail : Place the cursor on the party to send a mail to and a•When operating from the details screen, display a mail address and press a or g.Creating and sending i-mode mail➝P170Creating SMS : Place the cursor on the party and a(1 sec. or more)•When only the phone number is saved in the phonebook entry of selected person, pressing a can also create SMS.•When operating from the details screen, display a phone number and press a.Creating and sending SMS ➝P205Displaying sites : Place the cursor on the party and me15e"Yes"•Press t on the site connection confirmation screen to display using Full Browser.Attaching phonebook data to mail : Place the cursor on the party and me13Creating and sending i-mode mail➝P170Searching a received mail : Place the cursor on the party and me16e1 or 2•For UIM phonebook, place the cursor on the party and press m15, and press 1 or 2.◆Searching by specifying the search method•In search method available for UIM phonebook, pressing p on a phonebook list switches the Terminal phonebook list and UIM phonebook list.• is displayed on the left of each entry name in the UIM phonebook list.•When a phonebook list extends to multiple pages, you can switch pages using side keys [▲▼]. In a search method except Show all names, h may also be used to switch pages.1me[Phonebook & Logs]e12Specify the search method.Showing all names (Chinese syllabary) : 1eSelect the line to display by h•It will be displayed in the order of Zhuyin (ㄅ ➝ ㄉ ➝ ... ➝ ㄧ) Others (alphabets, numbers, Zhuyin beginning with a blank, symbols and no Zhuyin).•Each time you enter one Zhuyin character, an address that has the closest Zhuyin will be searched for in the address book.ab c Phonebook list (Show all names)F905i.book Page 52 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-20.png)
![53PhonebookF905i_E2kouSearching by group : 2eSelect a group•The entries in the specified group are displayed in the order of the reading below :Japanese syllabary order➝Alphabetical order➝Number ➝Entries starting with blanks➝Symbol➝No reading•If one of the keypads of 0-9, #, * is pressed, the line to which the keypad is assigned is displayed.Searching by group : 2eSelect a group•The address book data within the same group will be displayed in the following Zhuyin order.•The Zhuyin order ➝ Alphabetical order➝ Number➝Beginning with a blank➝Symbols➝ No ZhuyinSearching by frequency* : 3e1or2Displayed in the order of number of calls or number of mails.•The total numbers of calls and mails are counted up to 9,999.•PushTalk communications are not counted.•When resetting total number of calls/mails, place the cursor on the party, press m93 and select "Yes".Searching by phonebook number* : 4eEnter phonebook numberep•Zeroes before single- or double-digit phonebook numbers can be omitted.•You can display the phonebook list in phonebook No. order by pressing p with no input.Searching by phone number : 5eEnter part of a phone numberepSearch the phone numbers containing the entered numbers, and phonebook data list of the Terminal phonebook is displayed in the order of he phonebook number, and the phonebook data list of the UIM phonebook is displayed in the order of reading.•You can display the phonebook data list in the order of phonebook No. or reading by pressing p with no input.Searching by secret attribute* : 6The phonebook entries with secrecy appears in the order of phonebook No.*This search method is unavailable for UIM phonebook.◆Setting preferred search method <Default search setting>Set the search method displayed when pressing p on the stand-by display.1me[Phonebook & Logs]e1ePlace the cursor on the search method and m•Check mark appears after the specified search method.◆Checking phonebook details1peSearch the phonebookeSelect a phonebook entryaPhonebook No.bName and readingcGroup icon, Group namedIcons set in Ph.book 2in1 setting (with 2in1 ON in Dual mode) : : Phonebook entries in A mode : Phonebook entries in B mode : Phonebook entries in both A and B modeseSet any of Accept/Reject call, Caller ID settings or secret codefIcons indicating settings such as ring alert (call/mail)*1/ : Ring alert/ : Vibrate alert/ : Ring alert and Vibrate alert/ : Light alert/ : Light color/ : Light alert and Light color : Substitute image (call only)gImage*2hSaved icon, Icon typeFOMA terminal phonebook details screen(Phone number)aihfgcbdeL06.fm Page 53 Monday, April 21, 2008 11:16 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-21.png)
![56 PhonebookF905i_E2kou◆Setting secret code to mail address <Secret code>When the other party saves a secret code for its mail address (mobile phone number@imode.net.tw) and you set that secret code for the mail address in your phonebook, the secret code is automatically added to i-mode mail created by searching the phonebook for that phone number.1peSearch the phonebookePlace the cursor on a phonebook entryme344eAuthenticateeSelect the mail address2Enter the secret code of 4 digits.Canceling : Delete the secret codeegSecret attributeMaking phonebook entries secretYou can set secrecy to phonebook entries or groups. In Privacy mode (when Phonebook & Logs is "Hide set contact"), the phonebook entries or groups with secrecy are not displayed.•These functions cannot be set for phonebook entries or groups in UIM phonebook.•If you change secrecy, a confirmation screen appears for performing Apply secret attribute when you end the phonebook and return to the stand-by display.•Setting Privacy mode➝P114◆Setting secret attribute for phonebook entries1peSearch the phonebookePlace the cursor on a phonebook entry and me341• flashes when the secret attribute is set for the entry at the cursor position.Canceling : peSearch the phonebookePlace the cursor on a phonebook entry and me341✔INFORMATION•When operating from the Terminal phonebook details screen, press m and select "Edit/Settings"➝"Advanced settings"➝"Secrecy ON".◆Setting secret attribute for group•Secret attribute is not set for phonebook entries in a group with secret attribute. However, they function similarly to those with secret attribute.•Secret attribute cannot be set for (No group).1me[Phonebook & Logs]e12ePlace the cursor on the group and me8•When secret attribute is set for the group at the cursor position, blinks.Canceling : me[Phonebook & Logs]e12ePlace the cursor on the group and me8Quick dialUsing simple dial to make callsYou can make calls by a simple operation to parties with phonebook numbers 0-99 in the terminal's Phonebook.•When there are multiple phone numbers saved in a phonebook entry, a call is made to the first phone number.<Example> Making a voice call to the phone number registered in phonebook number 21Enter a phonebook number (2)en or tBlinkingF905i.book Page 56 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-24.png)
![62 Sound/Screen/Light SettingsF905i_E2kouSetting operations for incoming calls and mail/messages•This setting is reflected to Call ring alert, Mail/Msg ring alert, Incoming call/Videophone receiving of Call image, Vibrate alert/effect or Light alert.◆Changing operations for incoming call <Call alert/Videophone alert><Example> Setting operations for incoming calls1me[Settings & NW services]e512eSet the required itemsepChanging operations for incoming videophone calls : me[Settings & NW services]e612eSet the required itemsep◆Changing operations for incoming mail <Mail alert>MENU [Mail] 0111ae*1eSet the required itemsepSounds settingsCall ring alert/Mail ring alertChanging ring alert for calls and mails, etc.•When a movie/i-motion is set as a ring tone, a movie and/or sound is played for incoming phone call or mail (Movie ringtone).•This setting is reflected to ring alert in Call alert, Videophone alert, Mail alert, and Chat mail alert.<Example> Setting ring alert for incoming mail1me[Settings & NW services]e1122Setting ring alert for incoming voice/videophone call : 1e1-33Set the required itemsep❖Setting MusicMusic (Full Track Music) can be set as a ring alert in two ways : "Full song ring tone" for setting whole music and "Point ring tone" for setting a section previously selected.<Example> Setting Full song ring tone1Select "Music" at each settingeSelect a folder2Select a music to set.•When music in microSD memory card is selected, a confirmation screen appears. Select "Yes" to move the music to the terminal and set to a ring alert.Setting Point ring tone : Place the cursor on the data to set and aeSelect the item•When Full Track Music in microSD memory card available to nonmember is selected, a confirmation screen for cutting out the portion to set as the ring alert and saving it in the i-motion folder appears. Select "Yes", enter a display name and press p. The cut out music is saved to "i-mode" folder of i-motion as i-motion compatible with contents transfer.When the maximum number of saved items/area is reached➝P306F905i.book Page 62 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-30.png)
![63Sound/Screen/Light SettingsF905i_E2kou❖Ring alert priorityWhen setting ring alerts for multiple functions, they sound in order of the priority below.aAlert by contact of the Terminal phonebookbAlert/image by group of the Terminal phonebookcCall ring alert/V.phone ring alert/Mail ring alert/Call alert (Incoming call)/Videophone alert (Videophone receiving)/Mail alert•When the other party does not notify the caller ID, the ring alert for voice call depends on Anonymous caller. A ring alert for videophone call depends on the settings of V.phone ring alert/Videophone alert.•When the sound or image data used in Anonymous caller is deleted, the settings are changed. The sound actually heard or the image actually displayed may differ from the settings.•When movie/i-motion containing sound and image is set in "Movie ringtone" for ring alert, ring alert and incoming image set for "Movie ringtone" have precedence over images or movie/i-motion set in phonebook. When setting "Movie ringtone" of ring alert for music or movie/i-motion containing only sound (i-motion without image such as the one containing only voice of a singer), ring alert becomes "Music" or "Movie ringtone", and receiving call image becomes phonebook image.Stereo sound effectSetting Stereo/3D sound or Surround•This setting is also reflected to Surround of Settings for movie/i-motion and Music player, and Stereo/3D sound of Settings for Melody.1me[Settings & NW services]e16e1-3e1 or 2✔INFORMATION•The 3D sound function creates sound that is 3-dimensional or moves around in space, using stereo speakers (or stereo earphone set). Using the 3D sound function, very realistic i-αppli games and ring alerts and i-motion can be enjoyed. The most realistic 3D sound can be enjoyed when the terminal is held in front of the listener's face 20-30 cm away (varying between individuals). 3D sound becomes less realistic when the terminal is positioned off the center rightward or leftward or at a distance more or less than 20-30 cm from the face.•There are differences in how the 3D sound effect is felt among individuals.Alarm soundSetting alarm sound for Alarm clock and Schedule reminder<Example> Setting Alarm clock sound1me[Settings & NW services]e11321eSelect the Alarm clock fielde1-4Setting Music➝P87Setting sound for Schedule reminder : 2eSelect the Alarm on time field or Alarm in advance fielde1-33pAdjust volumeSetting volume of various sounds such as ring alert and alarm sound1me[Settings & NW services]e12e1-7•When Alarm volume is selected, select 1 or 2.2Side keys[▲▼] or kegVibrate alert/effectUsing vibrator to signal incoming calls and alarms•The operation of Vibrator for receiving 64K data communication depends on the setting of incoming voice call.•This setting is also reflected to settings for Vibrate alert or Vibrate effect in Call alert, Videophone alert, Mail alert, Chat mail alert and i-αppli settings.•If the terminal is on the desk, etc. when the vibrator operates, it may fall off because of the vibration.<Example> When setting the vibrator for incoming voice, videophone and PushTalk calls1me[Settings & NW services]e1321e1-2Setting the vibrator for incoming mail: 2Setting the vibrator used together with Alarm clock or Schedule reminder sounding : 3e1 or 2Setting the vibrator used for i-αppli : Press 4.31-5F905i.book Page 63 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-31.png)
![64 Sound/Screen/Light SettingsF905i_E2kou❖Vibrate alert priorityWhen setting Vibrator in multiple functions, it operates in order of the priority below.aAlert by contact of the Terminal phonebookbAlert/image by group of the Terminal phonebookcVibrate alert/effect/Call alert/Videophone alert/Mail alertOperation soundSetting operation soundYou can change the sound to be emitted when a key is pressed (except side keys [▲▼], M or P) or the terminal is opened or folded. Emission of the sound can also be inhibited.1me[Settings & NW services]e1141e1-4Display turn soundSetting sound to be emitted when turning display1me[Settings & NW services]e1142eSelect the Turn sound fielde1 or 22pShutter sound/Movie camera soundSetting shutter sound1me[Settings & NW services]e114e3 or 4e1-5Charge alertSetting alert sound for charging1me[Settings & NW services]e115e1 or 2On-hold toneSetting on-hold tone1me[Settings & NW services]e1162e1-3Quality alarmAlarm announcing that call is about to be interrupted•If the signal quality deteriorates rapidly, the call may be disconnected without sounding the alarm.1me[Settings & NW services]e1163e1-3✔INFORMATION•To make settings during a voice call, press m and select "Quality alarm".Reconnect alarmSetting alarm for reconnecting inter-rupted call1me[Settings& NW services]e1164e1-3Low Battery alertSetting Low Battery alertYou can set if you activate the alert when the battery is low.1me[Settings & NW services]e1165e1 or 2Silent modeMaking the terminal silentSounds from the terminal can be disabled in order to prevent disturbance to the people around you by enabling the vibrator for incoming calls or muting the keypad sound.F905i.book Page 64 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-32.png)
![65Sound/Screen/Light SettingsF905i_E2kou◆Starting Silent mode1# (1 sec. or more)After Silent mode specified in Silent mode is activated, (in General silent mode) or (in Personalized silent mode) is displayed on the stand-by display.•By default, you can also start/cancel Silent mode by pressing and holding Side key [▲] for 1 second or more with the terminal folded. When Silent mode starts, the light goes lit once in red and the vibrator operates once. When Silent mode is canceled, the light flashes twice in blue and the vibrator operates twice.•When the terminal is folded, Silent mode can be activated/deactivated from a menu on the sub-display.➝P33Canceling : # (1 sec. or more)❖When General silent mode is activatedAn incoming call is notified with vibration, muting all sounds to be emitted from the terminal such as ring tone, keypad sound, terminal open/close sound, Display turn sound or Alarm. Microphone is sensitized so that a call can be made in a small voice.•In the cases below, the operation of vibrate alert is "Pattern A".- When receiving voice call, videophone call, mail or 64K data communication- When the time specified in Countdown timer elapses- When the date and time specified in schedule comes•When the time specified in Alarm clock comes, vibrate operates according to the setting of Alarm clock.•Melody is not played automatically even when sent/received mail is displayed with "Auto play" set for Attachment auto-play.•When playing a movie/i-motion with sound in Silent mode, the sound playing confirmation screen appears. Select "Yes" to play the sound and image. When "No" is selected for a movie/ i-motion with image, only image is played.•When playing Music or Melody in Silent mode, the playing confirmation screen appears. Select "Yes" to play.✔INFORMATION•Shutter sound is emitted even in Silent mode.◆Setting Personalized Silent mode <Silent mode>1me[Settings & NW services]e1422Setting General silent mode : 13Set the required itemsepDisplays/Lights sett ingsTimed themeChanging stand-by display, Silent mode, etc. according to lifestylesMENU [Settings & NW services] 726This function allows you to change the stand-by display or activate Silent or Privacy mode at the specified time. You can select the alarm to sound once only, repeat everyday or sound on the same day every week.•Up to 18 codes can be registered.1me[Settings & NW services]e33eSelect the title is displayed at the left of the title for Timed theme set to ON.Setting/canceling the timed theme : Place the cursor on the title and m2Set the required itemsepStand-by displayChanging stand-by displayAn image, movie/i-motion, Chara-den or i-αppli can be set on the stand-by display or images in a folder can be set to appear at random on the stand-by display. The screen can be customized to display the newly arrived information, calendar, schedule, etc. Displaying clock (➝P104), battery and signal level icon (➝P101) can also be set.•Stand-by display for some of images, movies/i-motion, Chara-den or i-αppli are disabled if you do not insert the same UIM as used in downloading the data (UIM operation restriction).•If a data in "Preinstalled" folder is set, the set stand-by display is displayed even in Personal data lock.◆Setting image/movie/i-motion/Chara-den as stand-by displayImage, movie/i-motion or Chara-den downloaded from an i-mode site or still image or movie shot with the terminal can be F905i.book Page 65 Monday, April 21, 2008 10:53 AM](https://usermanual.wiki/Fujitsu/OS-F905I.Manual-1-2/User-Guide-1061538-Page-33.png)