Fujitsu OS-F905I Cellular Phone User Manual F905i

Fujitsu Limited Cellular Phone F905i

Manual Part 1 4

135MailF905i_E2kou❖Sent message details screenaStatus icon➝P186 "Outbox/Unsent messages list screen"bAttachment/SMS icon➝P186 "Received message details screen"cMail No./No. of msgsdSent date and timeeAddress type icon : Receiver ( and only for i-mode mail)fSubject•When i-mode mail or SMS is sent while staying overseas (except GMT+08:00), may appear succeeding the sending date and time.◆Creating/deleting folders•You can set secret attribute to a created folder. In Privacy mode (when Mail & Logs is "Hide secrecy fldrs"), folders with Secret attribute "ON" are not displayed.•Setting Privacy mode➝P114❖Creating folders•In Inbox, up to 40 folders in addition to "Inbox" folder and folder for Message i-αppli can be created.•In Outbox or Unsent messages, up to 20 folders in addition to "Outbox" "Unsent" folder and the folder for Message i-αppli can be created respectively.1ae1 or 4-52me1Changing folder setting : Place the cursor on the folder and me3Changing the order of the folder : Place the cursor on the folder and me7 or 83Set the required itemsep❖Deleting folders•"Inbox", "Outbox" and "Unsent" folders cannot be deleted.1ae1 or 4-5ePlace the cursor on the folder and me2eAuthenticatee"Yes"◆Checking number of mail items <Check No. of msgs>1ae1 or 4-5ePlace the cursor on the folder and me5✔INFORMATION•When operating from the mail list screen, press m, and select "Display" ➝ "Check No. of items".◆Displaying mail address <Display address>1ae1 or 5eSelect a foldereSelect a maileme32aefdbcF905i.book Page 135 Monday, April 21, 2008 10:53 AM
136 MailF905i_E2kou◆Moving received/sent/unsent mail to another folder <Move message>•Mails can be copied to microSD memory card.➝P294<Example> Moving a mail1ae1 or 4-5eSelect a folder2Place the cursor on the mail and me411Moving selected mails : me412eSelect mailsepMoving all mails in a folder : me4133geSelect the destination foldere"Yes"◆Sorting received/sent mail <Sort>The sorting order of the mail list in Inbox and Outbox can be changed temporarily. When the list display is closed, sorting is restored to "By date".1ae1 or 5eSelect a folder2me74Sorting sent mails : me531-4The sorting order of the mail list changes temporarily.◆Changing read/unread state of received mail•Read/unread state of received mails protected cannot be changed.<Example> Changing a mail from unread to read1ae1eSelect a folder2Place the cursor on the received mail to change the state and me51Changing a mail from read to unread : Place the cursor on the mail and me52Changing selected mails from unread to read : me53eSelect mailsepe"Yes"Changing selected mails from read to unread : me54eSelect mailsepe"Yes"Changing all mails in a folder to read : me55e"Yes"Changing all mails in a folder to unread : me56e"Yes"F905i.book Page 136 Monday, April 21, 2008 10:53 AM
137MailF905i_E2kou◆Protecting received/sent mail <Protect mail><Example> Protecting a mail1ae1 or 4-5eSelect a folder2Place the cursor on the mail and me31•The status icon changes to one of the followings : Inbox : (Read), (Unable to reply), (Replied), (Forwarded)Outbox : Unsent message : Protecting selected mails : me32eSelect mailsep•Each time you press m, you can select/deselect all mails collectively.Protecting all mails in a folder : me33Unprotecting a mail : Place the cursor on the mail and me34Unprotecting selected mails : me35eSelect mailsepUnprotecting all mails in a folder : me36◆Deleting mail <Delete mail>❖Deleting received mail1ae1•To delete all mails, press m46, perform authentication and go to Step 4.2Select a foldereme2•To delete a received mail, place the cursor on the received mail to delete and press m2.31-7Deleting selected mails : 2eSelect mailsepDeleting all mails in a folder : 4eAuthenticate4"Yes"❖Deleting sent/unsent mail<Example> Deleting a mail1ae4 or 52Select a folderePlace the cursor on the mail and me21Deleting selected mails : eme22eSelect mailsepDeleting all mails in a folder : Select a foldereme23eAuthenticateDeleting all mails : me42eAuthenticate3"Yes"F905i.book Page 137 Monday, April 21, 2008 10:53 AM
138 MailF905i_E2kouUseful functions of MailMail logsUsing message logs•Up to 30 items can be recorded for each of sent mails and received mails. When exceeding the limit, record is overwritten chronologically.◆Displaying message logsMENU [Phonebook & Logs] 81MENU [Phonebook & Logs] 82<Example> Displaying Sent message logs1rep•Select the party to display details screen.aPage/Total pages (list screen), Log No./Number of items (details screen)bSent/received date and time (Local date and time when staying overseas)cMessage log type : i-mode mail : SMSdSent msg log recorded while staying overseas (except GMT+08:00)Only a screen of sent message log appears.•This may not appear, for example, when sending date and time is not recorded.eMail address icon in Phonebook (i-mode mail)/phone number icon (SMS) (if saved in Phonebook), mail address (i-mode mail)/phone number (SMS)fName, ImageDisplaying received message logs : lep❖Using message logsCreating i-mode mail : Place the cursor on the log to send mail to and aeEdit the mailepCreating SMS : Place the cursor on the log and a (1 sec. or more)eEdit SMSepAdding to phonebook : aPlace the cursor on the log to add to Phonebook and me4•To add data to an existing phonebook entry, press m5.b1 or 2eSave the name or mail address, etc.Phonebook new entry➝P75, 76Making calls : n or tDisplaying redial/received call logs : paacecedSent msg log list Sent msg log detailsfdbgF905i.book Page 138 Monday, April 21, 2008 10:53 AM
139MailF905i_E2kou◆Deleting message logs<Example> Deleting a mail1On the sent/received msg log details screen, place the cursor on the message log to delete and me61Deleting selected entries : On the sent/received msg log details screen, me62eSelect message logs to deleteepDeleting all entries : On the sent/received msg log details screen, me63eAuthenticate2"Yes"Useful functions of Mail◆Copying textsYou can copy characters in mail. Copied characters can be pasted in entry fields in the mail creation screen or phonebook data entry screen.•The last copied item is recorded until the power is turned OFF and they can be pasted any number of times.1ae1 or 5eSelect a foldereSelect a maileme2•To copy a selected item, place the cursor on the item to copy and press m2.2Select a copy option.Copy text : Copy a specified range of characters.Copying➝P367 Step 2 and the following steps in "Copying/cutting characters"Copy title : Copy the title.Copy selected item : Copy selected items (mail address, phone number, etc.).Pasting characters➝P367◆Making call from mail <Phone call>For SMS or mail that the address is "phone number@imode.net.tw", a call can be made without saving.<Example> Making a call1ae1 or 4-5eSelect a folderePlace the cursor on the mail and me62Set a condition for dialingemMaking a call under set conditions➝P51◆Adding phone number, mail address and URL in the phonebook<Example> Adding a phone number1ae1 or 5eSelect a foldereSelect a mail2Place the cursor on the phone number and me41e1 or 2Adding to existing phonebook entry : Place the cursor on a phone number and me42e1 or 2eSelect phonebook data3Save the name or mail address, etc.Phonebook new entry ➝P75, 76◆Adding URL as bookmark1ae1 or 5eSelect a foldereSelect a mailePlace the cursor on the URL and me43eSelect a folder to add toF905i.book Page 139 Monday, April 21, 2008 10:53 AM
140 MailF905i_E2kouThe next procedure➝P153 Step 2 in "Recording in Bookmark"SMS settingsSetting SMSMENU [Mail] *7You usually do not need to change SMSC, Address and Type of Number settings.1ae*7eSet the required itemsepFont type : Select message of Chinese or English language to be sent. The maximum number of characters that can be sent differs depending on the font type.SMS report request : Select if you request SMS report request when sending SMS.Keep in SMS center : Select the storage period of sent SMS in the Short Message Center in cases the receiver cannot receive the SMS.SMSC : Select SMSC when using SMS services except DoCoMo.Type of Number : Select from "international" or "unknown".•If selecting "Others" in SMSC field and setting numbers for Address, Type of Number needs to be set to "unknown".Setting MailMail settingsSetting mail function of the terminal◆Sorting mail automatically into designated folders <Sort method>MENU [Mail] *3•Up to 30 sort methods for Inbox and Outbox can be registered.•Ordinary mails can also be sorted to the folder for Message i-αppli, but message i-αppli sorting method takes precedence.❖Enabling/disabling sorting automatically1ae*3e1eSet the required itemsep❖Setting sort methods•To set and activate sort method, turn Auto—sort ON/OFF "ON".➝P1941ae*3e2 or 3•Icon definitions : : Sent mail address : Received mail address : Ph.book number : Not in phonebook : Subject : Ph.book group : No methodRegistered sort criteria(In the order of priority levels)F905i.book Page 140 Monday, April 21, 2008 10:53 AM
141MailF905i_E2kou2peSet sort ruleSpecifying mail address : •To select from message logsa11 or 12eSelect a message log•To select from Phonebooka13eSelect the phonebook data•To enter directlya14eEnter a mail addressepSpecifying subject : a2eEnter the subjectepSpecifying Ph.book number : a3eEnter the phonebook numberepegSpecifying Ph.book group : a4e1 or 2eSelect a groupSpecifying Not in phonebook : a5Specifying No method : a6F905i.book Page 141 Monday, April 21, 2008 10:53 AM
142 MailF905i_E2kou3Select the folder to sort.•When the folder for Message i-αppli is selected, a message appears notifying the mails in the selected folder is used for the i-αppli. Select "Yes" to set the folder for sorting.4Select a priority level.A new method is added to the selected row.•To add the first method, select "Add last".✔INFORMATION•If multiple conditions are set, judgement is made from the condition with higher priority and sorted to the folder that matched for the condition first. A mail that was not matched for any condition is saved in the "Inbox" or "Outbox" folder.❖Setting sort methods from sent/received mails1ae1 or 5eSelect a folderePlace the cursor on the mail and eme84e1 or 2eCheck the saved contentsepThe next procedure ➝P195 Step 3 and the following steps in "Setting sort methods"•When Auto-sort ON/OFF is "OFF", a confirmation screen for setting to "ON" appears.❖Checking, changing or deleting sorting methods<Example> Checking1ae*3e2 or 32Select sorting rule.Changing sort methods : aPlace the cursor on the sort method and me2Operations for specifying sort method➝P194 Step 2-4 in "Setting sort methods"b"Yes"Changing sort priority : Place the cursor on the sort method and me5eSelect the position to moveDeleting : aPlace the cursor on the sort method and me3 or 4b"Yes"◆Setting mail signatures <Signature>MENU [Mail] 03❖Setting whether to insert signature automatically1ae*51e1 or 2❖Registering signature1ae*52egeEnter the Signatureep◆Adding address to mail group <Mail group>MENU [Mail] 05•Up to 20 mail groups can be added. Up to 5 mail addresses can be added for 1 mail group.1ae*82pCreating a mail : aThe next procedure➝P170Editing mail group names : Place the cursor on the mail group and me2Copying mail group : Place the cursor on the mail group and me3Deleting mail group : Place the cursor on the mail group and me4e1 or 2e"Yes"Operating mail address registered in a mail group : Select a mail groupeGo to Step 53Enter the mail group nameepF905i.book Page 142 Monday, April 21, 2008 10:53 AM
143MailF905i_E2kou4Select a mail group for registering a mail address.5aeSet the required itemsEditing registered mail address : Place the cursor on the mail address (or name) and me1eEditDeleting a registered mail address : Place the cursor on the mail address (or name) and me2e"Yes"eGo to Step 7Displaying details of registered mail address : me3eWhen finishing checking geGo to Step 76p7p✔INFORMATION•If no Address Type is set for TO, mail cannot be sent.◆Setting whether to quote message when reply <Reply format>MENU [Mail] 0411ae*61eSet the required itemsep◆Setting Quick reply <Activate quick reply>MENU [Mail] *621ae*62e1 or 2◆Registering quick reply format <Quick reply presets>MENU [Mail] *63•Up to 5 formats can be registered.1ae*632Selecting a formateEnter a textepe"Yes"Viewing the message text : Place the cursor on the message text and p.Deleting format : Place the cursor on the format and me1e"Yes"Resetting all formats : me2eAuthenticatee"Yes"Adding new format : "<New reply format>"eEnter a textep◆Setting display style of mail list <Message list>MENU [Mail] *21ae*2eSet the required itemsep◆Setting if you receive attachments automatically <Incoming msg. attach>MENU [Mail] *9•Files set not to receive automatically are received as Receive option attachment files.➝P1811ae*9eSelect a file item to receiveep•"Tool data" indicates the data of phonebook, bookmark and schedule.•"Other" indicates Excel, Word, PowerPoint or other data.✔INFORMATION•Images or melodies attached to message text are automatically received regardless of this setting.◆Setting whether to play melodies automatically <Attachment auto-play>MENU [Mail] *01ae*0e1 or 2F905i.book Page 143 Monday, April 21, 2008 10:53 AM
144 MailF905i_E2kou◆Selecting type of mail to display <By display type>You can display only the mails of specified type in the received and sent mail lists temporarily. When the list display is closed, sorting is restored to "Display all items".1ae1 or5eSelect a foldereme72e1 or 2◆Changing mail font size <Font size>Change the font size to display mails from among the 5 types of "Larger", "Large", "Medium (Standard)", "Small" and "Smaller".1ae1 or 5eSelect a foldereSelect a maileme31e1-5◆Setting mail reception notification for terminal in operation <Display priority>MENU [Mail] *4You can set if you display a receiving screen, reception result screen or Auto sending screen by priority when i-mode mail or SMS is received during the terminal operation.1ae*4e1-3Continue operation : Display none of the receiving screen, reception result screen and sending screen.Show message : Display the receiving screen, reception result screen and sending screen.Open:Cont/Close:Show : Continue operation when the terminal is open and prioritizes reception notification when the terminal is folded.F905i.book Page 144 Monday, April 21, 2008 10:53 AM
145MailF905i_E2kouSMS saved to UIMSaving SMS in UIM◆Moving/Copying SMS into UIM•Maximum number of saved items➝P447<Example> Moving a SMS1ae1 or 5eSelect a folder2Place the cursor on the SMS and me421Moving selected SMS : me422eSelect the SMSepCopying a SMS : Place the cursor on the SMS and me431Copying selected SMS : me432eSelect the SMSep3"Yes"◆Displaying SMS in UIMMENU [Mail] 812MENU [Mail] 8131ae81e2 or 3aPage/Total pagesbStatus icon : Unread (able to reply) : Unread (unable to reply) : Read (able to reply) : Read (unable to reply) : SMS report request, Missed call notification or Notify recorded message : SMS errorcSent/received date and timedSender/ReceivereTop of the message2Select SMS to display.aIcon : Received (able to reply) : Received (unable to reply) : Sent : SMS report request, Missed call notification or Notify recorded message : SMS in UIM: SMS in SIM card (combined SMS): SMS in SIM card (combined SMS in an incomplete status)bMail No./No. of msgscIcon : Date and time : Receiver : Sender : Sender (unable to reply) : Subject "UIM Inbox" "UIM Outbox" "SMS report request" "Notify missed call" "Answer videophone"•When sent SMS is moved or copied to UIM, the sent date and time are deleted from the sent SMS in the UIM. Note that for sent SMS with SMS report request set, the sent date and time are displayed.•For the SMS which contains error, appears instead of and except does not appear.•When SMS is received while staying overseas (except GMT+08:00), may appear at the end of the receiving date and time.abcdeF905i.book Page 145 Monday, April 21, 2008 10:53 AM
146 MailF905i_E2kou◆Moving/Copying SMS in UIM to the terminal<Example> Moving a SMS to the terminal1ae81e6 or 72Place the cursor on the SMS and me31Moving selected SMS : me32eSelect the SMSepCopying a SMS : Place the cursor on the SMS and me33Copying selected SMS : me34eSelect the SMSep3geSelect the destination foldere"Yes"✔INFORMATION•When the memory is not enough or the maximum number of saved items is reached, SMS cannot be moved or copied. Unprotected i-mode mail and/or SMS, if any, are not overwritten. Delete unnecessary i-mode mail and/or SMS from folders of Inbox and Outbox.◆Deleting SMS from the UIM•When deleting a sent SMS, the corresponding SMS report request in UIM is also deleted at the same time.<Example> Deleting a SMS1ae81e6 or 72Place the cursor on the SMS and me21Deleting selected SMS : me22eSelect the SMSepDeleting all SMS : me23eAuthenticateDeleting all SMS report request : me24eAuthenticate3"Yes"F905i.book Page 146 Monday, April 21, 2008 10:53 AM
147F905i_E2koui-αppliF905i.book Page 147 Monday, April 21, 2008 10:53 AM
148 i-αppliF905i_E2koui-αppliDownloading i-αppli from sites makes a terminal more convenient. For instance, various games can be downloaded to the i-mode terminal, direct registration to phonebook and schedule from i-αppli can be made or Data Box including saving and obtaining image can be operated with some i-αppli.✔INFORMATION•Any image or movie saved by i-αppli or i-αppliDX is saved in "i-mode", "Deco-mail picture" or "Deco-mail pict" folder of My Picture, "i-mode" folder of i-motion or added album respectively, or in the i-αppli. •When ring tone is saved by i-αppliDX, it is saved in "i-mode" folder of Melody or in the i-αppli.Downloading i-αppliYou can download i-αppli from sites and store it in the terminal.•Not saved if downloading of i-αppli fails due to poor signal quality, etc.•The maximum size of i-αppli that can be saved is 1 Mbyte.1Displaying a siteeSelect an i-αppliThe selected i-αppli is downloaded.•While downloading, press g and select "Yes" to stop downloading.•When download or communication is interrupted, resuming confirmation screen may appear. Select "Yes" to restart downloading; when "No" is selected, partial saving confirmation screen appears if it is possible. If partial saving is impossible, data already downloaded is deleted. The rest of partially saved i-αppli can be downloaded.➝P213 Step 3 in "Starting i-αppli"When Software info disp. is "ON"A confirmation screen of i-αppli information and downloading appears.•The detail information of the i-αppli to be downloaded can be displayed by pressing p.Downloading i-αppli that uses the saved data, the serial number of your mobile phone/UIM card or microSD memory cardDownloading confirmation screen appears.•With "Guide" displayed on the guide area, press p to check details of the data used by the i-αppli.When the selected i-αppli is already downloaded.A message indicating that the data is already downloaded appears. When the new version of the i-αppli is released, upgrading confirmation screen appears.When the selected i-αppli is already downloaded with a different UIMOverwriting confirmation screen appears.2Select a destination to save.•Some i-αppli shows setting screens for Set stand-by disp. (i-αppli stand-by) or Use network.Setting items ➝P215 Step 1 in "Setting operating condition of i-αppli"3"Yes"The downloaded i-αppli starts.•Select "No" to return to the site screen.•When setting "Set stand-by disp." to "Yes", setting confirmation screen appears. ✔INFORMATION•Even when downloading failed, deleted i-αppli or data deleted at the same time from microSD memory card are not restored.◆Viewing i-αppli information when downloading <Software info disp.>You can set if you display i-αppli information when downloading i-αppli.1me[i-αppli]e23e1 or 2F905i.book Page 148 Monday, April 21, 2008 10:53 AM
149i-αppliF905i_E2kouStarting i-αppliMENU [i-αppli] 11d (1 sec. or more)2Select a folder.•Icon definitions : : Preinstalled folder without i-αppli : Preinstalled folder with i-αppli : Created folder without i-αppli : Created folder with i-αppli3Select i-αppli to start.•Icon definitions (Only marks with * are displayed in IC card content.) : Message i-αppli : i-αppliDX(orange) : i-αppli : i-αppli setting available for i-αppli stand-by display : i-αppli set for i-αppli stand-by display : i-αppli with Auto start setting(Upper half in gray, lower half in orange) : i-αppli partially saved* : i-αppli unavailable due to UIM operation restriction* : i-αppli of stopped condition by IP (Information Provider)* : i-αppli downloaded from SSL page : i-αppli set as one-key shortcut- : i-αppli set as two-key shortcut// : Search by i-mode (Displayed in preinstalled folder and IC card•Each time you press t, display view switched in the order of graphical display➝list display➝thumbnail display.•When "Confirm every session" is Set NW transmission of the i-αppli to be started, connection confirmation screen appears.•When partially saved i-αppli is selected, downloading confirmation screen of the rest appears. The i-αppli can be started after the rest is downloaded; when download is disabled, the i-αppli partially saved may be deleted.•To quit i-αppli, operate in the procedure specified for each i-αppli. You can also quit i-αppli by pressing f and then selecting "Yes".✔INFORMATION•Some i-αppli may have different display area, screen mode may not be changed by rotating the display.•i-αppli that vertical and horizontal (or vice versa) size is less than 432×240 dots are displayed with horizontal and vertical size doubled.•On a full-screen or wide display giving 864 vertical or horizontal dots, each pressing of side key [S] switches displaying and hiding the battery icon.•The volume of sound emitted during i-αppli operation can be adjusted. Note that some i-αppli have no sound.➝P88, 216•Images used on i-αppli (shot using the camera from i-αppli, obtained using the i-αppli infrared communication function) or the data you entered may be sent to the server via Internet.•Partially saved i-αppli is allowed displaying software description, deletion and folder change.•i-αppli that uses microSD memory card can save data in it. Data saved in microSD memory card may not be available for other models. i-αppli that uses microSD memory card can be viewed with "i-αppli data".➝P299Graphical display<Software list> <IC card content>F905i.book Page 149 Monday, April 21, 2008 10:53 AM
150 i-αppliF905i_E2kou•i-αppli may be interrupted when any of the conditions below occur. Upon completion of the current operation, i-αppli restarts; selecting "i-αppli" after pressing s allows to restart i-αppli while continuing the current operation (except for the ones marked with *). Some i-αppli may not return to the state of interruption.- When a voice call comes in- When a videophone call comes in*- When Lock on close is activated*- When the function is switched over to another function•When you are out of service area or the saved data cannot be used, i-αppli may not start or not operate correctly.•For certain i-αppli, the IP (Information Provider) may access i-αppli saved in the mobile phone and directly set operation disabled state. In such a case, i-αppli startup, stand-by display settings, upgrading, etc. are disabled, enabling only deletion and software description display. To resume using i-αppli, notification of i-αppli enabled must be received; contact the IP (Information Provider).•For certain i-αppli, the IP (Information Provider) may send data to i-αppli saved in the mobile phone.◆Displaying history when operation finishes without using saved data <Security error hist.>When i-αppli ended with an error because i-αppli cannot use the saved data, the name of the i-αppli, date and time, and cause of security error are recorded.•Up to 20 items can be recorded. When exceeding the limit, record is overwritten chronologically.1me[i-αppli]e33•To delete histories, press p and select "Yes".◆Displaying i-αppli Description <Software description>1d(1 sec. or more)eSelect a folderePlace the cursor on the i-αppli and p•Displayed items differ depending on i-αppli.•To check the site certificate of the i-αppli downloaded from SSL page, press p on the Software description screen.◆Setting operating condition of i-αppli <Software settings>1d(1 sec. or more)eSelect a folderePlace the cursor on the i-αppli and me6eSet the required itemsep✔INFORMATION•If you set "No" for Set NW transmission, the i-αppli may not be started and timely information such as stock prices or weather forecast may not be provided by i-αppli.•If you set "Yes" for Use icons, since icons for unread messages, remaining battery level, Silent mode, and antenna icon may be sent to IPs (Information Providers) through the Internet, it may give the information to a third party. Some i-αppli requiring icons may not operate when "No" is set.◆Setting operations while i-αppli is active❖Setting Display light1me[i-αppli]e24e1 or 2Terminal Setting : The light is turned ON according to Display light of Display.Software : The light is turned ON according to the i-αppli.F905i.book Page 150 Monday, April 21, 2008 10:53 AM
151i-αppliF905i_E2kou❖Setting vibratorSet if you allow the vibrator operation by i-αppli.1me[i-αppli]e25e1 or 2❖Setting power savingSet brightness of the display, key lighting and volume.<Example> Presetting1me[i-αppli]e2721e1 or 2•"Power saved mode" sets the brightness to "Brightness 1", Key lighting to "OFF" and Effect sound volume to "Level 1" (not changed if set to "Silent"). For "Default mode", this function resets each setting to default state.Changing brightness : 2e1-6Changing Key lighting : 3e1 or 2Changing volume : 4eSide key [ST] or keg◆Starting another i-αppli from i-αppliSome i-αppli can start specified i-αppli and allow to enjoy i-αppli without returning to the Software list.1Start another i-αppli from i-αppli◆Motion trackingThis terminal is compatible with feeling games, and operations can by performed by tilting or shaking the terminal.•While playing the game, do not cover In-camera with your hand, etc. Tilt, etc., may not be detected.◆Using preinstalled i-αppli(TBD)Starting i-αppli quicklyi-αppli can be started by a simple operation from the stand-by display.◆Setting i-αppli to one-key/two-key shortcut•You can register one item of one-key shortcut.•You can register one item of two-key shortcut for each key of keypad, up to 10 items in total.<Example> Setting two-key shortcut1d (1 sec. or more)eSelect a folder2Place the cursor on the i-αppli and me82Setting i-αppli shortcut : Place the cursor on the i-αppli to set and me81•Same operations are required also for canceling.3Select a destination to save.•Icon numbers ( - ) correspond to keypads (0-9) used to activate two-key shortcut.•When a destination already set is selected, overwriting confirmation screen appears.◆Starting i-αppli using one-key/two-key shortcut<Example> Starting i-αppli using two-key shortcut10-9ed (1 sec. or more)Starting i-αppli using one-key shortcut : g (1 sec. or more)Automatically starting i-αppli◆Specifying whether to start automatically <Auto start>Set all i-αppli, which are set to "ON" for User in Set auto start info., at once to start automatically.1me[i-αppli]e22e1 or 2◆Setting date and time of Auto start <Set auto start info.>1d(1 sec. or more)eSelect a folderePlace the cursor on the i-αppli to set and me5eSet the required itemsepF905i.book Page 151 Monday, April 21, 2008 10:53 AM
152 i-αppliF905i_E2kouUser : Select if you perform Auto start with the conditions below.Time : Enter the time to automatically start the i-αppli.Repeat : Set the condition for repetitive Auto start of the i-αppli.Weekly : Set the day of the week for Auto start when "Weekly" is set for Repeat.Date : Set the date for Auto start when "Onetime" is set for Repeat.Software : Specify if you automatically start at the intervals preset for the i-αppli.i-αppli 1-4 : Depending on i-αppliDX, up to 4 conditions of Auto start can be set while it is running. Specify if you enable those settings.✔INFORMATION•Even with Auto start set, automatic activation does not occur in the cases below, causing to appear on the stand-by display and to be recorded in Start failure hist.- When the screen except the stand-by display appears- UIM operation restriction is set (except for preinstalled i-αppli)- When UIM cannot be detected- When the interval of Auto start is too short- When All lock, Personal data lock or Privacy mode is ON (when i-αppli is "Authorized access")- When the i-αppli usage is stopped by IP (Information Provider)•Even if you change "Repeat" of multiple i-αppli to set them start automatically at the same time, only one of them can be activated at one time. The information of the i-αppli that failed to be activated is recorded in Auto start failure log, however, does not appear on the stand-by display.◆Displaying history when Auto start of i-αppli fails <Start failure hist.>When Auto start of the i-αppli fails, appears on the stand-by display and the name of the i-αppli, date and time, and causes are recorded.•Up to 20 items can be recorded. When exceeding the limit, record is overwritten chronologically.•When displaying Start failure hist. or when the next Auto start is successful, on the stand-by display disappears.1me[i-αppli]e31•To delete histories, press p and select "Yes".i-αppli ToStarting i-αppli from site or mail1Select a link item enabling to start i-αppli of the site or i-mode mail e"Yes"✔INFORMATION•i-αppli not saved in the terminal cannot be started with i-αppli To. Some i-αppli can be started immediately after being downloaded from a site, without saving.•Partially saved i-αppli cannot be started from mail with i-αppli To.•For i-αppli starting just after downloading from sites, communication confirmation screen while they are activated may appear.•Some i-αppli program may not be saved in the terminal.•If the i-αppli is set not to start with i-αppli To, the i-αppli cannot be started.Å®P215i-αppli stand-by displayOperating i-αppli stand-by displayWhen the i-αppli is set for the stand-by display, you can start the i-αppli from the stand-by display to operate.F905i.book Page 152 Monday, April 21, 2008 10:53 AM
153i-αppliF905i_E2kou•While displaying i-αppli stand-by display, or appears on the top of the display in gray.•Setting i-αppli stand-by display➝P94, 215◆Starting i-αppli of i-αppli stand-by display1On the i-αppli stand-by display, ceOperate the i-αppli✔INFORMATION•When the terminal is turned ON while setting the i-αppli stand-by display, activating confirmation screen of the i-αppli stand-by display appears. The display starts when "Yes" is selected or no operations are performed for approximately 5 seconds. Selecting "No" cancels i-αppli stand-by display.Note that when the power is turned ON by Auto power ON, the i-αppli stand-by display automatically appears, without displaying the confirmation screen.•When setting i-αppli that performs communication, to i-αppli stand-by display, it may not operate correctly depending on conditions such as signal quality.•When an error that cancels the i-αppli stand-by display occurs, canceling confirmation screen for the i-αppli stand-by display appears. If you select "Yes", it is canceled and recorded in Abnormal exit hist.◆Quitting i-αppli and returning to the i-αppli stand-by display1While running i-αppli, fe"End"◆Displaying exit history of i-αppli stand-by display <Abnormal exit hist.>When an error that cancels i-αppli stand-by display occurs, the name of the i-αppli, date and time can be recorded.•Up to 20 items can be recorded. When exceeding the limit, record is overwritten chronologically.1me[i-αppli]e32•To delete histories, press p and select "Yes".Managing i-αppliVarious functions such as i-αppli upgrade, creating folder and deleting unnecessary i-αppli for easier use of i-αppli are available.◆Upgrading i-αppli <Upgrade>When the i-αppli is updated, upgrade is available.1d(1 sec. or more)eSelect a folderePlace the cursor on the i-αppli and me4e"Yes"✔INFORMATION•When upgrading i-αppli, data such as game scores stored in i-αppli may be erased.•Some i-αppli may inquire the server about the availability depending on the length of time of use and number of times of use. If the server gives a notice of the i-αppli having been updated, it can be upgraded after confirming if you upgrade it.•Some i-αppli is automatically upgraded.F905i.book Page 153 Monday, April 21, 2008 10:53 AM
154 i-αppliF905i_E2kou◆Creating/deleting folders❖Creating folders•Up to 20 items can be registered.1d (1 sec. or more)2me4Changing folder setting : Place the cursor on the folder and me1Changing the order of the folder : Place the cursor on the folder and me5 or 63Enter a folder nameep❖Deleting folders•Preinstalled folders cannot be deleted.1d (1 sec. or more)ePlace the cursor on the folder and me21•When i-αppli is contained in the folder, perform authentication.2"Yes"◆Moving i-αppli to another folder<Example> Moving 1 item1d (1 sec. or more)eSelect a folder2Place the cursor on the i-αppli and me31Moving selected i-αppli : me32eSelect an i-αppliepMoving all i-αppli in the folder : me333Select a folder to move toe"Yes"◆Deleting i-αppli<Example> Deleting 1 item1d (1 sec. or more)eSelect a folder2Place the cursor on the i-αppli and me21Moving selected i-αppli : me22eSelect an i-αppliepDeleting all i-αppli in the folder : me23eAuthenticate3"Yes"◆Sorting i-αppli <Sort software>1me[i-αppli]e21e1-5◆Checking number of i-αppli in folder <Software in folder>1d(1 sec. or more)ePlace the cursor on the folder and pIcon definitions➝P213 Step 3 in "Starting i-αppli"◆Checking current settings of i-αppli <Software information>The settings such as saved number of i-αppli or i-αppli stand-by display can be checked.1d (1 sec. or more)eaSoftware count : Total number of i-αppli saved is displayed.i-αppli display : Name and destination folder to save of i-αppli set as i-αppli stand-by display are displayed.One-key shortcut : Name and destination folder to save of i-αppli registered for one-key shortcut are displayed.Auto start : Name of i-αppli, name of destination folder to save i-αppli and start time of i-αppli set for the next Auto start are displayed.F905i.book Page 154 Monday, April 21, 2008 10:53 AM
155i-αppliF905i_E2kouF905i.book Page 155 Monday, April 21, 2008 10:53 AM
156 i-αppliF905i_E2kouF905i.book Page 156 Monday, April 21, 2008 10:53 AM
157i-αppliF905i_E2kouF905i.book Page 157 Monday, April 21, 2008 10:53 AM
158 i-αppliF905i_E2kouF905i.book Page 158 Monday, April 21, 2008 10:53 AM
159F905i_E2kouFull BrowserF905i.book Page 159 Monday, April 21, 2008 10:53 AM
160 Full BrowserF905i_E2kouFull BrowserViewing websites for PCsMENU [i-mode] 7You can connect to Internet to view websites created for PCs.Framed, CSS and SSL/TLS supporting websites can also be viewed.•Communications of large-size data such as viewing websites containing many images and downloading require high charges.When you connect to the full browser for the first time, a warning message will be displayed.If you select "YES" the message will not be displayed for subsequentc connections.•Full Browser supports the functions and technologies below : Frame : A frame for dividing a web page or a website configured with frames. A website with some frame configurations may not be fully displayed.Cookie : A function that saves website-specified information such as the date and time the website appears and the number of the times it is visited in the terminal. Based on such information, various functions on the website can be easily used.CSS : A standard that defines the layout of web pages.JavaScript : A language for creating websites.Referer : URL information of a website from which a link is selected to move to a website specified in it.SSL/TLS : A technology for securing safe data communications with authentication/encryption. A website that supports SSL/TLS has URL beginning with https://. In some cases, it is used in a part of a website.<Example>Connecting to website at specified address (URL)1de7231eEnter a URLep•In alphabet input mode, repeatedly press 1 to enter ".", "/", "-", etc. and * to enter "@imode.net.tw", ".com", ".com.tw", ".net.tw", ".edu.tw", ".org.tw", ".gov.tw", "http://www.", "https://www.", "www.", ".asp", ".html", ".htm" or ".php".•When "No" is set in Access setting such as by default, the Access setting screen appears.➝P275•From the second time, the URL previously connected appears.•Press c or m9 to stop connecting or m8 to stop connecting with multiple windows.Connecting to Home : 1Setting URL for Home connection➝P274Displaying from bookmark : 2eSelect a foldereSelect a bookmark to displayConnecting from Entry URL log : 32eSelect a URLegConnecting to Browser history : 4eSelect a URLeg3After reading a website, fe"Yes"✔INFORMATION•The functions below are not supported : - Displaying Flash graphics- Playing sound- Plug-in- Saving screen memos- Phone To (AV Phone To), SMS To, Media To•Some websites may take extra time to be displayed or not be displayed correctly.•When displaying a site including an image, the icons below may appear instead of the image : : When Image is set to "Not display" in Image display : When the image data is invalid or the image cannot be found, or when the image cannot be received because the terminal goes out of service area during reception : When the image cannot be displayed for an incorrect URL, etc.F905i.book Page 160 Monday, April 21, 2008 10:53 AM
161Full BrowserF905i_E2kou◆Viewing screen of Full BrowseraStatus display/Title or URL (Light blue) : Acquiring : In thumbnail display of framed website➝P272 : In frame enlarged display➝P272 (Dark blue) : Acquiring another frame during enlarged display of current frame : Downloading Word, Excel or PowerPoint filesb/ : Display mode (PC mode (full scale)/Mobile mode)➝P274 : In Window Open Guard➝P274cPointer➝P272dSection mapThe current position relative to the whole display appears temporarily at connection or scrolling screen (except in thumbnail display). The size of section map of PC mode may change during downloading the page or vary by websites.❖Key operations on Full Browser screenk, 1-4, 6-9 : Scrolling•Depending on the display mode, keys available for scrolling differ.➝P274t, a : Displaying previous/next pages•The operation is enabled only in PC mode with the pointer hidden.0 : Searching➝P2735 : Switching zooming factor•Settings of zooming in/out remain after exiting Full Browser.# : Switching pointer display/hide➝P272* : In the horizontal display, switching displays with/without the guide area•When "Full screen view" is selected in Screen view setting, pressing * on the vertical display to switch the guide area.➝P275Switching display modes : pe4Display mode setting➝P274Displaying key operation list : pe8Connecting to Home : me1Adding the displayed website as bookmark : me21eSelect a folder to add toRecording bookmark➝P153Displaying from bookmark : me22eSelect a folderDisplaying from bookmark➝P153Connecting by specifying URL : me31eEnter the URLepConnecting from Entry URL log : me32eSelect a URLegConnecting to Browser history : me33eSelect a URLegReloading information : me4Creating message with the URL of the displayed website pasted in the message text : me6Viewing information : me8e1-3Certificate➝P163Setting image display : me84Image display➝P275Switching character encode : me851•Each pressing of m851 causes to change character encode as SJIS➝EUC➝JIS➝UTF8. Press m852 to switch to "Auto switch".Playing animation from the beginning : me86Making Window open guard valid/invalid : me87e"Yes"Script setting➝P274Checking section map : me88Setting color or display of section map : me89e1-4✔INFORMATION•When you change the zooming factor while displaying multiple websites with Multi window, the change applies only to the currently active window.•Operations for selecting link destinations and items are the same as those for i-mode.➝P150Full Browser screen (Vertical display)acbddFull Browser screen (Horizontal display)cbaF905i.book Page 161 Monday, April 21, 2008 10:53 AM
162 Full BrowserF905i_E2kou◆Switching display of pointerWhile displaying the pointer, you can move on a screen by operating the pointer with k. Hold down to move quickly.•Settings of displaying/hiding the pointer remain after exiting Full Browser.1On the Full Browser screen, #.aMoving rangeThe pointer can be moved in this range. On some frames, the range the pointer can move may be limited.bPointerWhen moving near the end of the window, the screen scrolls.cDisplayed when the item can be selected by the pointer.•You can switch displaying/hiding the pointer each time you press #.❖Switching to drag mode for operationYou can switch to drag mode during pointer display to operate contents available in drag mode.•Operations available in drag mode vary by contents.1Move pointer onto contentseg (1 sec. or more)Pointer changes from to , and you can operate contents with k.•Press and hold g (1 sec. or more) again to return to pointer display.◆Displaying a framed websiteWhen a framed website appears, a thumbnail screen appears allowing to view the entire configuration. Individual frames can be enlarged for viewing.•During thumbnail display, the operations and settings below are disabled : - Scrolling screen- Search- Save image, Word, Excel or PowerPoint files- Link display- Section map check/setting1On the Full Browser screen containing frames, select a frame to be enlarged.•Use j to move to the frame. In PC mode, h also can be used to move to the frame.•While displaying the pointer, you can select the frame to enlarge by operating the pointer with k.•Press c to return to the thumbnail screen.◆Displaying multiple websites <Multi window>You can view a website selected from a maximum of 5 websites displayed.<Example> Displaying a website link on a new window1On the Full Browser screen, place the cursor on the link and pe35•Press side keys [ST] to switch a window. A window to switch to can be selected from a window list by pressing and holding side keys [ST] for 1 second or more or pressing p1.•To close the current window, press p2 and select "Yes".abcIn thumbnail display In frame enlarged displayOn stand-by DisplayingF905i.book Page 162 Monday, April 21, 2008 10:53 AM
163Full BrowserF905i_E2kou◆Searching for a character string displayed on website1On the Full Browser screen, 0eEnter characters in the search fieldegThe set character string is searched for and character strings matching the entered string are highlighted.•Press t to move to the previous option and a to move to the next option (matched string).•Press p to end searching.Setting search method : On the Full Browser screen, 0emeSet the required itemsepSearch method : Select "Partial match" or "Exact match" for Search method.Case-sensitive : Select if you make case-sensitive search.◆Uploading imagesYou can upload images in GIF or JPEG format saved in the terminal to a website.•The maximum allowable size of an image file uploaded is 80 Kbytes and the total size of images and character strings, if contained, is limited to 100 Kbytes.1On the Full Browser screen, "Browse".•"Browse" button appears when the terminal can upload images. It appears as a different mark when the same website appears on a PC, etc.2Select a foldereSelect an image to upload•When microSD memory card has been inserted, select "Phone memory" or "microSD".•When editing or canceling the selected image, select "Browse" button again and select "Change" or "Cancel".✔INFORMATION•Procedures for uploading vary by websites.•You cannot upload images inhibited to output from the terminal or data except images or character strings.◆Downloading imagesYou can save images in GIF, JPEG, PNG or BMP format displayed on websites.•The maximum size of an image file that can be saved is 500 Kbytes.•PNG and BMP format images can be saved in "Other" folder of microSD memory card, but cannot be displayed.1On the Full Browser screen me5eSelect an image to be savedThe next procedure➝P157 Step 2 and the following steps in "Downloading images"•When placing the cursor on the image to save, the image is surrounded by frames and the title and the file size are displayed.✔INFORMATION•Background images cannot be downloaded.•Images with horizontal and vertical (or vice versa) sizes larger than 864×480 in GIF format or 1,728×2,304 in JPEG format cannot be saved in the terminal. Some images cannot be saved depending on the JPEG type.•Even a file of an allowable file type and size may not be saved from some websites.•When exceeding maximum number of saved items/maximum area➝P306◆Downloading Word, Excel or PowerPoint filesYou can save Word, Excel and PowerPoint files displayed on websites.•The maximum size of data file that can be saved is 500 Kbytes.•Word, Excel or PowerPoint files can be downloaded only when microSD memory card is inserted.•File of Word 2007, Excel 2007 or PowerPoint 2007 cannot be downloaded.1On the Full Browser screen, select data to download.•You can stop downloading by pressing c or m9 and selecting "Yes". You can stop downloading all data with multiple windows by pressing m8.2"Save"Displaying : "Preview"Canceling saving : "Back"e"No"F905i.book Page 163 Monday, April 21, 2008 10:53 AM
164 Full BrowserF905i_E2kou3Enter a display nameep•When " " appears in the lower-left corner of the guide area, the save destination can be switched by pressing t.•Word, Excel or PowerPoint files are saved in a folder of Other in the terminal or "Other" folder in microSD memory card. If Other in the terminal has multiple folders, a screen appears asking to select a saving folder. The files are saved to a selected folder.✔INFORMATION•Downloading stops when the downloaded data size exceeds 500 Kbytes during downloading.•When exceeding maximum number of saved items/maximum area➝P306Setting for Full BrowserYou can set various functions for Full Browser.◆Setting URL for Home connection <Home URL>MENU [i-mode] 7511de751eEnter the URLep✔INFORMATION•To register the website while displaying on the Full Browser screen, press m and select "Set as home URL"Å®"Yes".◆Making cookie settings <Cookie set/delete>MENU [i-mode] 752When Cookie is Valid, you can easily use functions of websites displayed previously.•Some websites or contents services may not be correctly displayed or used unless Cookie is Valid.•When Cookie is Valid, information such as the date and time the website is displayed and the number of times it is visited are transmitted. DoCoMo assumes no responsibility liable if your information is known to third parties by Cookie setting.1de7522Select the Cookie fielde1-3•When "Valid(notify)" is selected, select the Notify field and then select the timing to notify of information sending/receiving from "Sending", "Receiving" or "Sending/receiving".Deleting all Cookie data : meAuthenticatee"Yes"3p✔INFORMATION•When UIM is replaced with another one, Cookie is set to "Invalid". If "Valid" or "Valid(notify)" is set at this time, a confirmation screen appears asking if you delete Cookie if Cookie data saved in the terminal after authentication.◆Making Script settings <Script setting>MENU [i-mode] 753You can set if you validate operation of a website containing JavaScript.•Some websites may not be correctly displayed unless Script Setting is "Valid".1de753eSelect Script setting fielde1-3•When "Valid(NotConfirm)" or "Valid (ConfirmAlways)" is selected, select the Window Open Guard field and select "Valid" or "Invalid".With "Invalid" set for Window Open Guard, a message appears asking if you open a new window as specified by JavaScript. With "Valid" set, no new windows open even if specified by JavaScript.2p•When "Valid(Not confirm)" is already selected, a confirmation screen for registration appears.◆Selecting display mode <Display mode setting>MENU [i-mode] 754You can set if you display a screen with the PC screen size (PC mode(full scale)) or aligned with the lateral display size of the terminal (Mobile mode).1de754e1 or 2F905i.book Page 164 Monday, April 21, 2008 10:53 AM
165Full BrowserF905i_E2kou✔INFORMATION•While displaying multiple websites with multi window, the display mode is changed for all websites.•When the pointer is hidden in Mobile mode, press h to display previous/next pages.❖Scrolling screenScrolling in modes is as shown below.•Press any key except k to scroll the page by screen.•Hold down the key to scroll continuously.■PC mode(full scale)■Mobile mode*Only for hiding the pointer.◆Setting whether to display image and animation <Image display>MENU [i-mode] 7551de755eSet the required itemsepImage : Set if you display images.•When "Not display" is set, appears instead of the image or animation.Animation : Set if you display animation.•When "Not display" is set, the first image of the animation appears.◆Setting whether to use Full Browser <Access setting>MENU [i-mode] 756•When setting "Yes", check the notice.1de756e"Yes" or "No"◆Setting whether to send Referer <Referer setting>MENU [i-mode] 757•DoCoMo assumes no responsibility if your information is known to third parties by sending Referer.1de757e1-3◆Setting whether to display full screen <Screen view setting>MENU [i-mode] 758Specify whether to activate full-screen display in vertical display.1de758e1 or 2u, 2u, 813l4r679PC modeu, 1-3, t*d, 7-9, a*Mobile modeF905i.book Page 165 Monday, April 21, 2008 10:53 AM
F905i_E2kouF905i.book Page 166 Monday, April 21, 2008 10:53 AM
167F905i_E2kouData Display/Edit/ManagementF905i.book Page 167 Monday, April 21, 2008 10:53 AM

Navigation menu