GuangZhou Walkera Technology DEVO-10 2.4GHz Transmitter User Manual part 5of8
GuangZhou Walkera Technology Co., Ltd 2.4GHz Transmitter Users Manual part 5of8
Contents
Users Manual part 5of8
JeUenllon DEVD'WD Welcome to use the DEVO-10 transmitter Trainee is off and trainer is working Trainee is working and trainer is off ' “l'iiill E Trainer icon Training status display when the trainer's ioon becomes into x the trainee stoos flying and the trainer is working when the trainers icon turns intoW". the trainee is flying and the trainer is in leisure (3) Usage method The training switch can be freely switchable between Lefl mm and Right trim The default setting is Right trirn. Shown as below During flight, it the trainer pushes Right Trini once. the linkage icon will be shown as w" that means the control right is rnoved to thetrainee trorn Trainer. lltrainer pushes Right Trini once again, the linkage icon will be shown as "X" that means the trainer takes back the control right from the trainee. (4) Setting for training lunction channels Trainee is available to gel tall or part or flight control power to the aircraft model uia setting the training function channel in the trainer's radio Below is the setting method Push the ENT button to enter main Menu. and then push UP or DN to get access to fuhcllch menu Then push UP Dr DN I0 select "training tunctloh“ and push ENT button to enter Trainer screen inlerlace The available channels are shown below, and the current status uttrainer switch is also shown there Inhibit l Trainer switch selection:Press up or DN to select the switch action. press R or L to select the sWitch which you want it includes right and tell trim The delault setting is Right trirn. Channel selection Press up or DN to select the channel cption;Press R or L to select the cnannel(s) which you want to grant to trainee. The channelts) you have selected will be activated as "Active" The channels which are not granted to trainee will be kept lnhlblted. The delault setting is “Inhibit“. Press EXT to exlt. DEvDr‘l D—43 m— Welcome to use the Deva-10 transmitter DEVD/IG 3.15 Timer There are two timers which can be set as stopwatch and countdown. respectively. Each timer can be operated by switch or by shortcut. Selling method: Press ENT to enter Main Menu, and then press UP or DN to get access to Funcation Menu Then push UP or UN to select" Timer' and press ENT to enter Timer interface. The timing range of stopwatch is lrem o to 59:59 (59 minutes 59 seconds).The default setling is stopwatch. Tim r in Type S anatch l (1) Countdown setting ll you need countdown time mannerpress R or L to select the countdown.There is an expand sub—menu sel time itemPress UP Dr DN to move the navigational mark to select the option of Seting time item Press R or L lo sel the cuuntdown time.The setlable counldcwn lime range is from 00:05 to 59:55. Timer (2) Switch selection F'ress UP or DN to move the navigational mark to Switch.Tnere are inhibit and available switch Options. available switch can be selecled by press L or R. Il includes FMOD1,2. FMODZ. MlX1,2, MIXZ, ELEV D/R,AILE D/R, RUDD DIR, GEAR SW, SPSO SW, SPS1 SW, SPSZ SW and SPSB SW We can selecl lhe desired item excepl these items of SPSO SW, SPS1 SW. SPSZ, and SPS3 which should be previously set at Stick Position Switch at Model Menu(refer to “2.8 Slick Position Switch"). Press EXT to exil allerfinished (3) Useage of timer The limerluncaiion can be started by press the UP key on the tool screenPress up key once means timer luncalion slarls,press once again means In slop it and press DN key means cleaning Below is lhe picture of timer display on the boot screen Timer Dex/cm 0 — 44 oleUen ion DEVD-1 D Pa rt th ree All the functional settings, which are relative to the operation system 01 DEVO—iO itseli, are fully integrated in System Menu They include Ai rp I a n e Language, Display, Buzzer‘ vibrator, Stick Mode, Stick Directionstick calibration, and About. cleUerlllon DEVO/i D 1.0 System Menu All the tunctional settings, which are relative ID the operation system ot DEVO-10 ttselt, are tully integrated in System Menu They include Language, Display, Buzzer, vibrator, Stick Mode, Stick Directionstick calibration, and About Below is Ihe boot screen of helicopter Welcome to use the DEVO-1O transmitler Elevator trim Throttle trim Transmission power display I Tilill E7322; volume 1 Eu P11 210“ |‘-.,."llj_l[jl 1 Madam Timer display Model type display Throttle percentage value Ruddertrim display liltileron trim display 1.1 Language setting Press ENT to enter System Menu and then press UP or DN to move the navigational mark to select System menu. Then push ENT to enter System menu.Press UP or DNto select Language and press ENT to enter the language interface Press UP or DN to select the language that you want A "c " will be shown on the screen after selected Push EXT to exit 1.1 Language setting 1.2 Display 1.2 Display Press ENT I0 enter the main menu and push UP or DN to move the navigational mark to select system menu Press ENT I0 enter System Menu and Ihen press UP or DN (0 select Display to enler "Display"lr||erface Three Items are available ll) be set Below are Ihe setlirig methuds further" (1) Backllght contrast the backlight contrast is adjustable by pushing uP or UN to move the navigational mark to the digits after Contrast. Press R key to increase the backlight contrast. while press L to decrease it (2) Backllghl lightness the backllghl lightness is adyustable by pressing UP or DN to move the navigational mark the digits after Lightness The power consumption will be increased it the backlighl lightness is too bright and the battery cruise duration will be shonened Press R or L to increase or decrease the tightness. When the value is one means turn oft the backlight (3) Backlight time out: it is possible to set the duration which LCD stays at highlight in the term ot “Always on” or any period trorn 5 to so seconds With an interval of 5 seconds.Press UP or DN to move the navigational mark to select the digits after Timeout. Press L to short the time oi backlight duration or Keep it in the torm of ”Always on" while push R or prolong the time The maxium is scs Press EXT to exit. stcm 0—45 cieUenilon Welcome to use the DEVO-10 transmitter DEVD'1 C] 1.3 Buzzer warning Pressing ENT to enter the main menu and pressing UP or DN to move the navigational mark to select system menu then pusing ENT to enter System menu Pressing UP or DN to select Buzzer and pressing ENT to enter the buzzer interlace (l) Status:There are On and oft two status on the Buzzer interlace Pressing UP or DN to move the navigational mark to the status option. Pressing R or L to change the ON or OFF status lt includes Thro stick,knobs and Tunes items unoer the status is ON (2) Throttle stick buzzer Pressing UP or DN to move the navigational mark to Thm Stick item then pressing R or L to change the status lrom inhibit to Active When Buzzer is at the status of on it Throttle Stick is set as "Actlve", a relative musical scale WIiI make response when moving the throttle stick You can iuoge the position ol the throttle stick according to the diflerent musical scales Also, it can be set as inhibit Press UP or DN to move the navigational mark to Thro Stick item and push R or L to change the status from lnhibit to Active (3) Knobs midpoint Buzzer When Buzzer is at the status of an. if Knobs is set as “Actlve".there is buzzer sound when you turn the AUXA and Auxs to the miopoint. It you don't need the buzzer sound. please change the status to lnhibit. (4) Buzzer tone: the tone is composed 0110 grades. You can choose the lavorite one according to your interests.Press UP or DN to move the navigational mark to Tone item and press R or L to make a listening test Press EXT to exit. 1.4 Vibrator The vibrator used as an alarm lunction to remind the users Press ENT to get the Main Menu, press UP or DN to select System Menu And then press ENT to get System Menu, press UP m DN I0 seiect Vibratur Press ENT to gel Vlbralcr setting lnlerface There are two status as Inhibit and Active. Press R or L to seiect Active it need Press EXT I0 exlt after llnlshed 1.5 Stick Mode Press ENT to get Main Menu, press UP or DN to select System Menu. and then press ENT to the System Menu. press UP or DN to select Stick Mode. and press ENT to get stick Mode setting interface. Stick, iii-indie Made 2 Mode 3 DEVI—J 10747 (ieUeniion DEvD/lcl Welcome to use the DEVO-1D transmitter Stick Made Stick Made lEl Made I Made 2 MUCH? 3 fig—jig? Select the stick made according to the throttie made showing on the screen. Deva—10 offers 4 stick modes. please refer to “8.0 Switches exchange between leftrhand and right—hand thrutties Press EXT to exit after finished. 1.6 Stick Direction Press ENT to get Main Menu, press UP or UN to select ~ , - - System Menu, and then press ENT to the System Menu, Si“: ix D "E Cii DI'I @ press UP or DN to select stick Direction, and press ENT to get stick direction setting interface E ii? vatnr stick Direction:There are tour items available as Elevator. _ Aiiemn, Throttle and Rudder. Press UP or DN to select Ai l era n the stick which wili change direction, and press R or L In change the direction The lactory setting is Normal N g rm 3 I 1.7 Slick Calibration It is a function to rs-calibration when stick unusual Csllbmlinn method: Press “ENT' to the Main Menu, press UP or UN to select System Menu, then press ENT to System Menu. Press UP or DN to select Stick Calibration and press ENT to the Stick Calibration setting interlaoePreSS ENT to enter Calibration,and below interface snows: Stick Calibratinrl mil Stick; Caiibratinrl El El-thn Fin n Clockwise or counter clockwise mechanically move the Sill: is (J a! I [J i'tliiLl I'I iEi right 51le and left slicks lrorrr minimum levels to maximum levels several times, and then return the sticks to the neutral positions, respectively it will shows the callbration is SucceSSlui after you press ENT to confirm. Press EXT to exit after finished. 1.8 About about r-t . System Menu. then press ENT to System Menu. Press 0 Ui'iWai E! UP or DN to select About and press ENT to the About r r. t settlng interface. lr’ElI' D P- Press "ENT' to the Main Menu, press UP or DN [0 select ' I Press EXT to exit after finished. LI t] ran“ Vet. [L I DEVDV1 cl 748 cleUenlion DEVD-1D 2.0 Model Menu Model Menu manages all the model data saved in DEvo-lo. lt includes Model Select, Model Name, Model copy. Model Transmit, Model Receive, Model Reset, Type Select, Trim System. Stick Position SWitch, Devlce Select, Devlce Output, wing Type, Power Amplifier, Fixed lD and Sensor selling. Welcome to use the DEVO-1O transmiller 2.1 Model Select Press ENT to pet Main Menu and press UP or DN to make Model Menu is selected Press ENT to get the Model Menu and press UP or DN to select Model select, press ENT to gel the Model Select setllng intertaoe 7' r} MUD 1 Press UP or DN to select the model you desired, press 3‘- ‘vF‘ci Ml |D3 ENT to confirm and marks"v"in the lront or selected one. Total 30 models are optional. Press EXT to exit alter finished. 2.2 Model Name ln the menu or model name, you can make a desired name tor your model tor long term storage. lts data can be directly Withdrawn in next nights Repeat the step “2.1 Model Select" to choose the model you want to name or save, press EXT to back to the interface. Press "ENT" to enter Main Menu, press UP or DN Io select ”MODEL Menu", then Press “ENT" to enter Model Menu, Press UP or DN Io selecl “Model NAME" and then press ”ENT" button to get the "Model Name" selling imer'ace Press UP or DN to select the character and figure which are needed to he changed, press R or L button to change the character and figure, and press UP or DN to set next one. Press EXT to exit after finished 2.3 Model Copy Press ENT to get "Main Menu" and press UP or UN to make "Model Menu" is selected. Press ENT to get "Model Menu" and press UP or DN to selecl" Model Copy", press ENT to the "Model Copy" setting interface. Press UP or DN to choose the model you Warlt to be copied as source model and press ENT to confirm, The serial No and model name of Source Model will be shown as below photo ltrliziijel I" El 39 m Jurize: l ME‘JD E‘ Desi J] t} M [i eat” Then press UP or DN to locate lhe source model, press Ci U Ul E- l M U D ENT to confirm Then an enqulre “Are you surev" is - . . .—_. —- - popped up as below photo. Press ENT to copy. or press D E t' L MU D I EXT to exit. Are you sure? DEvDs'l Df 49 oieUeniion DEvD—io Weicome to use the DEVO—101ransmiller 2.4 Model wireless copy The modei data between two DEVO—10 equipments can be wireiessiy copied via Modei Transmit and Modei Receive in Modei Menu. (1) Model transmission ‘ iE Press ENT to enter “Main Menu" and press UP or DN to selecl “Model Menu". Press ENT to get "Model Menu" and press UP or DN lo select "Model transmission". continue to press ENT to enter "Model Transmit" setting interface Press UP or DN to choose the source model which will be transmitted, and press ENT to conlirm, an enquiry inlonnation “Are you sure?“ will be shown as below photo. Press ENT to lransrnit, “Transmitting appears in the interface. Or press EXT to exit.Press EXT to exit after another Deva—10 received the dala. Muriel Transmit (El El Hm. I hire you sure? (2) Model receiving Press ENT to enter Main Menu and press UP or DN to select Model Menu Press ENT to gel Model Menu and press UP or DN to select Mocei Receiving, continue to press ENT to enter Model Receive setting interface An enquiry information “Are you sine?- will be shown as below photo. Mode! Hecewe _ Press ENT to receive, “Connecting ,,,,,, " and “Receiving AYE WI L] 13 U re ';’ ." will be shown in series in the interface. The inlormation oi ~Reeeivecl' with the model name will be shown alter receiving is finished. Or press EXT to exit Connecting 2 >> MOD 5: as MOD —' cl ' MOD 4 ml Press UP or DN to choose the save position. an enquiry inlormation “Are you sure?" is shown alter press ENT. N 1 Press ENT to save or press EXT to exit. ' U- -"‘1 Press EXT to exit afler finished. “4 DD {1 r. i’E‘ DEvcwl 0— 50 cleUenlion DEVD-1D Welcome to use the DEVO-10 transmitter 2.5 Model reset All the model data can be restored to factory settings via Model Reset. Press the ENT to get Main Menu and press UP or DN to select Model Menu Press ENT to get Model Menu and press UP or DN to select Model Reset, press ENT to get Model resetsetting interface J] in} MOD "' It is possible to store up to 30 models data in the model 2 » MCI Ell list of DEVOe‘lO equipment. There are two methods to {5 r“ 1:1 reset the model data: batch reset and single reset. 3 — M J E " Batch reset: press UP or DN to select All Models, an enquiry infonnatton'are you sure?" will he appears in the interface. Press ENT to reset all models. or press EXT to exit. Single reset: Press UP or DN to choose the model you want to restore. “Are you sure?" will appear after press ENT. Press ENT to reset or press EXT to exit. Model Flesel No i l'u'llIIEiEl All MOD 2 fire mu BIJFP “5 W” sure“? Press EXT to exit after finished. 2.6 Type Select This device offers two model lypes menu They are helicopter and airplane respectively Press ENT to get Main Menu and press UP or DN to select Model Menu Press ENT to enter and press UP or DN to select Type Select and press ENT to enter setting interface Type Select Press “ENT" button to get Helicopter and Airplane selections and press UP or UN to select and press ENT to confirm, then press EXT to exit. 2.1 Trlm system Trim System is able to finely tune the following six items. respectively: Elevator, Ailemn, Rudder, Throttle, Left Trim and Right Trim. The trim range is divided into 20 grades (factory default is set at 4). It is ocnuenient to subtly modify the pitch by adjusting the trim range Press ENT to get Main Menu and press UP or DN to select Model Menu Press ENT to enter and press UF' cr DN to select Trim System, press ENT to enter setting interface. . em El B'v'clililf Ailemn ngclatci—El cieUeniion— Weieeme to use the DEVO—1D transmitter DEVO'flO Press UP or UN to select the trim which wili set, press R to increase the trim value and press L to reduce For elevalor, aiieron, and rudder, Ihere are two more options: Normai and Limited, press R or L you can change the setup. "Ncnnal" means the trim is always working alihcugh the corresponding stick stays anywhere “Limited" means the trim is cut cf working when the corresponding stick is at maximum positicn Trim 3' sin n Ele'r'amr Marmai aileron Press EXT to exit afler finished. 2.8 Stick Position Switch According to ihe foilcwing setting, ihe swiich can be used es a swiich. The tum-on cr hum-oft pcsiiicn at which stick stays can also be settabie Method for setting: SiiCK PDEIiiiUH SW. .. 191 Press the ENT to get Main Menu and press UP or DN to S WiiC h seiect Mudei Menu Press ENT to get Mcdei Menu and press UP or UN to seiect Stick Position Switch, press ENT to get Stick Position Switch setting interface There are iouropiions under the Stick poslion switch: SPSD. SPSi,SPSZ,SP83 Press R or L ic choose ihe switch you want to define Press UP or DN to inhibit Channel in navigation mark, and press L to expand the menu.The Channel inciudes four items: Elevator, Aileron, Throttle and Rudder. The iaolory deiauii is Inhibit. Take Elevator for exampie. Press R or L Io choose the Eievaior as stick, then Press UP or DN to move naglvalion mark Io vaiue oi position. It's possibie to adjust the stick position via pressing R or L Stick Position SW El Switch F‘usiiinn SP8!) SW L'ln Press UP cr DN to navigate the OPEN settingpress R or L in change ihe direction ciihe channel siick Press UP or DN to navigate the STATUS, which can check the sketch map at the stick OPEN/CLOSE direction Check if it was set correctiy Stick F‘nsitirin f‘ Posmon On After finished the settingpress EXT to exit DEVCI'1 D 7 52 it‘s possible to setup aii iuncticnai switches and adjust ievers according to your needs or habits The Function inciudes cieUeniion DEVD-1D Welcome to use the DEVO-1O transmitter 2.9 Device select This setting can help you configure various functional switches, or adjust levers it includes Flight Mode sWitch, Flight Motte trim, Throttle hold Switch and Flap Switch select, Flap Trim select Press ENT to enter Main Menu. press UP or DN to move navigation mark to select Model menu. Press ENT to enter Modei menu function. Press UP or DN to select Device Option. Press ENT to Device Option interface. (1) Flight Mode SWitch Press UP or DN to move navigation mark to Flight Mode Switch item and press R or i. to select the desired switch. The factory default setting is FMOD swrtoh _ (2) Flight Mode Trim Fi iEi i'ii N1 Lid b' Til iii There are two modes Common and Flight Modei ln (1 fl iTI ITI n I”! common mode all the trim values, to which various sticks -' - - are relative, put equally effects on all the night modes. in Flight Mode, the Trim values to which each stick is relative put, respectively, effect on the corresponding stick Press UP or UN to move navigation mark to Flight Mode Trim, press R or i. to seiect Common or Flight Mode. The factory default is Common. (3) Throttle Hold Switch Referto ti) Flight Mode Switch. (4) Flap Switch Seiect Refer to (1) Flight Mode Switch. (5) Flap Trim Select Referto ti) Flight Mode Switanflerflnisned the setting, press m to exit 2.10 Device Output Device output can set up the output switches respectively. it can also activate. inhihit or use other functions There are eight items in total: FMOD switch, MiX switch.Ei_EV DIR switch, AiLE D/R switch, RUDD D/R switch.GEAR swrtoh. SPSO. SPS‘i. SPSZ. spsa, left trim, right trim, AUXA Knnb,AUX5 knoh. Setting: - a D 9 vi U utP ui Press ENT to enter main menu. press UP or DN to move H , navigation mark to Model Menu Press ENT to enter Model OE! di menu Press uP or DN to select Output device and press ENT to enter Output device intertace _ L] E AP‘ 0 I“ Beiow six items can be adjusted Gear, Flap, Auxz. AUX3. FU I'I [iii I] n AXU4 and AUXS. ttlsear Press UP or DN in OUTPU interface can change the gear switch. It inciudes FMOD. MiX ELEV DIR. AILE D/R. RUDD DIR. GEAR. SPSO. SPS'i. SPSZ. SPS3. Lett trim. Right trim. AUX4 Knob. AUXS Knob Press R or L to select the setting switch, The deiauit setting is GEAR SW Press UP or DN to select Function setting atteryou seiect the switchPress R or i. can enter the interiace of Gear activateinhibit and Governor The deiault setting is Activate You can continue to set others items after finished Device Output 69 r fictive Functiljn (2) Flap Press UP or DN to move navigation mark to Function setting below Flap The factory default setting is System Output setting DEVDr’i Df 53
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2012:03:23 19:18:09+08:00 Create Date : 2012:03:23 16:09:25+08:00 Metadata Date : 2012:03:23 19:18:09+08:00 Format : application/pdf Document ID : uuid:e8127558-42e4-42d3-84d8-c5e0144e9620 Instance ID : uuid:1719ad3e-81a0-46ae-8f91-1db197e93a6a Has XFA : No Page Count : 11EXIF Metadata provided by EXIF.tools