Jorjin Technologies WG1300E00 Wireless LAN EM board for Module (802.11 bg) User Manual CC3000 WG1300E00 UG R01 20120302
Jorjin Technologies Inc. Wireless LAN EM board for Module (802.11 bg) CC3000 WG1300E00 UG R01 20120302
Contents
- 1. User Manual
- 2. User Manual - Statements
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1740415 |
| Application ID | 4MF7JcosI6YNzAwLKu7G3A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 14.54kB (181719 bits) |
| Date Submitted | 2012-07-10 00:00:00 |
| Date Available | 2012-07-10 00:00:00 |
| Creation Date | 2012-03-02 09:29:11 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2012-07-06 14:14:53 |
| Document Title | Microsoft Word - CC3000-WG1300E00-UG-R01_20120302 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
a module solution provider WG1300-00 EM Board User Guide Revision 0.1 Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Doc No: WG1300-00 EM Board-UG-D01 Index 1. INTRODUCTION…………………………………………………………………1 2. WG1300-00 EM BOARD ........................................................................................ 2 2.1. TOP SIDE ............................................................................................................. 2 2.2. BOTTOM SIDE .................................................................................................... 5 2.3. Hardware setup…………………………………………………………………7 2.4. Schematics……………………………………………………………………...8 2.5. Bill of Material (BOM)………………………………………………………...9 3. APPLICATION EXAMPLES………………………………………………...…10 4. HISTORY CHANGE ............................................................................................. 11 Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 1 Doc No: WG1300-00 EM Board-UG-D01 1. INTRODUCTION The purpose of this user guide is to help user understanding how to use WG1300-00 EM (Evaluation Module) board to complete hardware setup for test to evaluate the performances of CC3000-WG1300-00 SiP Module. 2. WG1300-00 EM BOARD In the following sub-sections, it’ll divide into TOP and BOTTOM Side to explain details on the key parts and its features. 2.1. TOP Side Figure 1 is TOP-Side picture of WG1300-00 EM Board. Antenna J2 J4 J1 J5 J3 CC3000-WG1300-00 Module Figure 1. TOP Side of WG1300-00 EM Board The picture above marks some key parts and jumpers and Table 1 below shows the explanations to them in the details. Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 2 Doc No: WG1300-00 EM Board-UG-D01 Items Key Parts Descriptions The core module for performance evaluation. It’s CC3000-WG1300-00 related feature can be referred to its datasheet. Module Antenna It can used for radiated test by reworking cpacitor to correct pads. J1 It’s a U.FL RF connector via which you can proceed conducted power test. It is a jumper via which we can swap testing modes, test mode and operation mode. When pin 2 and J2 pin 3 are shorted, it runs in operation mode and it operate in test mode when pin 1 and pin 2 are shorted. It is a jumper for testing power consumption. In operation mode, pins of the jumper is shorted. For J3 power testing, the jumper is removed and ammeter crosses the pins to do the testing. J4 Refer to Table 2. For more details on these through-hole test points J5 Refer to Table 3. For more details on these through-hole test points Table 1. TOP-Side Key parts of WG1300-00 EM Board Table 2 below shows the signal descriptions of J4 Pin Number Pin Name Pin Type Descriptions GND Ground NS_UARTD I/O Networking subsystem UART Debug line FUNC4 -- Leave floating WL_UART_DBG I/O UART Debug Line WL_RS232_TX Test RS232 transmit output; Leave floating for normal operation WL_RS232_RX Test RS232 receive output; Leave floating Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 3 Doc No: WG1300-00 EM Board-UG-D01 for normal operation GND Ground WL_SPI_CS Host interface SPI Chip Select WL_SPI_DOUT Host interface SPI Data Ouput 10 WL_SPI_IRQ Host Interface SPI Interrupt Request 11 WL_SPI_DIN Host Interface SPI Data Input 12 WL_SPI_CLK Host interface SPI Clock input Table 2. TOP-Side J4 of WG1300-00 EM Board Table 3 below shows the signal descriptions of J5 Pin Number Pin Name Pin Type Descriptions I2C Clock signal output from CC3000. This SCL_CC3000 pin is connected to SCL_EEPROM via a 0-Ohm resister and is not used by end users. I2C Clock signal input from EEPROM inside SCL_EEPROM CC3000-WG1300-00 SiP Module. This pin is connected to SCL_CC3000 via a 0-Ohm resister and is not used by end users. I2C Data signal from CC3000. This pin is SDA_CC3000 I/O connected to SDA_EEPROM via a 0-Ohm resister and is not used by end users. I2C Data signal from EEPROM inside SDA_EEPROM I/O CC3000-WG1300-00 SiP Module. This pin is connected to SDA_CC3000 via a 0-Ohm resister and is not used by end users. VBAT_SW_EN Active-high enable signal from Host device. GND Ground GND Ground VIO power supply from HOST to Module. For MSP430 Host platform, VIO_HOST PI VIO_HOST=VBAT_IN. For other platforms which have different voltage levels from Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 4 Doc No: WG1300-00 EM Board-UG-D01 Battery voltages’, R14 can be remove to support such a case. Battery voltage input to Module. For MSP430 Host platform, VIO_HOST=VBAT_IN. VBAT_IN PI For other platforms which have different voltage levels from Battery voltages’, R14 can be remove to support such a case. 10 GND Ground External Slow Clock input from Host 11 EXT_32KHz device. It can be used for the SiP Module inside which hasn’t slow clock source. Table 3. TOP-Side J5 of WG1300-00 EM Board 2.2. BOTTOM Side Figure 2 is BOTTOM-Side picture of WG1300-00 EM Board. J7 J6 Figure 2. Bottom Side of WG1300-00 EM Board There are two EM Board mating connectors which are used for connecting to Host platform and are mounted on the bottom side as the picture above. Table 4 and Table 5 show the descriptions on the Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 5 Doc No: WG1300-00 EM Board-UG-D01 signals brought out from these two EM mating connectors. J6 Pin Pin Name Module Pin Type Description Number GND Ground External Slow Clock input from Host EXT_32KHz device. It can be used for the SiP Module inside which hasn’t slow clock source. 10 VBAT_SW_EN Active-high enable signal from Host device. 12 WL_SPI_IRQ Host Interface SPI Interrupt Request 14 WL_SPI_CS Host interface SPI Chip Select 16 WL_SPI_CLK Host interface SPI Clock input 18 WL_SPI_DIN Host Interface SPI Data Input 19 GND 20 WL_SPI_DOUT Ground Host interface SPI Data Ouput Table 4. BOTTOM-Side J6 of WG1300-00 EM Board J7 Pin Pin Name Module Pin Type Description Number GND Ground VBAT_IN PI Battery voltage input to Module VBAT_IN PI Battery voltage input to Module 15 EXT_32KHz External Slow Clock input from Host device. Table 5. BOTTOM-Side J7 of WG1300-00 EM Board Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 6 Doc No: WG1300-00 EM Board-UG-D01 2.3. Hardware Setup Before conducting performance test, EM Board should be connected to Host platform, either with mating connectors, J6 and J7, or single row headers, J4 and J5. For the case of using EM mating connector for hardware connection, the mating EM connector should be lined up and spaced 1.2” apart as Figure 3 below Figure 3. Host PCB Mating Connector Arrangement For the case of using single row headers, the necessary signals as the ones brought out from EM mating connector need to be wired to Host platform. Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 7 Doc No: WG1300-00 EM Board-UG-D01 2.4. Schematics Figure 4 is the schematics of WG1300-00 EM Board WG1300-00 Module VBAT_IN: 2.7V~4.8V => 3.3V TYP VIO_HOST: Voltage of Host Level (1.2V~3.6V) C1 10pF CAP1005 L2 NL IND1005 C2 NL_10pF CAP1005 C3 10pF CAP1005 SCL_CC3000 0R RES1005 R15 RES1005 0R R16 WL_SPI_IRQ RES1005 0R R17 WL_SPI_DIN RES1005 0R R18 WL_SPI_CLK RES1005 0R 46 45 44 43 42 41 GND GND GND GND GND GND 31 29 SCL_EEPROM 32 33 34 30 SCL_CC3000 GND GND WL_RS232_RX GND EXT_32K GND GND GND VBAT_IN 11 RES1005 0R WL_SPI_DOUT VIO_HOST E-N46_13.5X16.3_TOP WL_EN1 GND 10 VIO_SOC WG1300-00 WL_RS232_TX SDA_CC300 R2 0R RES1005 SDA_EEPROM 28 27 Test mode => R7 - 1K to PU 26 R5 R7 J4 NL_HEADER 1x12 pitch 2.0-1x12 WL_SPI_CS WL_SPI_DOUT WL_SPI_IRQ WL_SPI_DIN WL_SPI_CLK VBAT_IN R14 SCL_CC3000 SCL_EEPROM VIO_HOST SDA_CC300 SDA_EEPROM VBAT_SW_EN 0R RES1608 EXT_32KHz C4 1uF CAP1005 22 21 R12 NL_0R 20 R13 0R RES1005 RES1005 EXT_32KHz VBAT_IN 19 C5 1uF CAP1005 Internal 32kHz => R13 short to GND External 32kHz => R12 short J3 HEADER 1x2 pitch 2.0-1x2 R19 EM Connector VBAT_IN VIO_HOST=VBAT_IN in MSP430 case NS_UARTD FUNC4 WL_UART_DBG WL_RS232_TX WL_RS232_RX NL_1K RES1005 VIO_HOST 23 Header for Debug 10 11 12 VBAT_SW_EN 0R RES1005 25 24 0R RES1005 R11 EEPROM select: Test mode => R1,R2 - NL Functional mode => R1,R2 - 0R to short GND GND GND GND R10 WL_RS232_RX WL_SPI_CS 0R RES1005 37 38 39 40 WL_EN1 WL_EN2 GND GND U1 18 0R RES1005 VBAT_SW_EN WL_UART_DBG SPI_CLK R9 SDA_CC3000 SDA_EEPROM FUNC4 17 WL_RS232_TX NS_UARTD GND 16 0R RES1005 SPI_DIN 0R RES1005 R8 SPI_IRQ 0R RES1005 R6 WL_EN2 15 0R RES1005 R4 WL_UART_DBG GND 35 36 R3 FUNC4 GND GND Test mode => 1-2 short to GND Functional mode => 2-3 short NS_UARTD SPI_CS GND 12 J2 HEADER 1x3 pitch 2.0-1x3 R1 SCL_EEPROM RF_ANT SPI_DOUT J1 U.FL-R-SMT(10) U.FL 14 L1 NL IND1005 13 ANT1 AT8010 AT8010 10 11 J5 NL_HEADER 1x11 pitch 2.0-1x11 EXT_32KHz R20 0R RES1005 11 13 15 17 19 10 12 14 16 18 20 VBAT_SW_EN WL_SPI_IRQ WL_SPI_CS WL_SPI_CLK WL_SPI_DIN WL_SPI_DOUT EXT_32KHz J6 SFM-110-02-L-D-A pitch 1.27-2x10 Connect to RF1 R21 0R RES1005 11 13 15 17 19 10 12 14 16 18 20 J7 SFM-110-02-L-D-A pitch 1.27-2x10 Connect to RF2 Figure 4. Schematics of WG1300-00 EM Board Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 8 Doc No: WG1300-00 EM Board-UG-D01 2.5. Bill Of Material (BOM) Items Reference Designator Description U1 TI CC3000 WiFi b/g Module (BM) ANT1 ANT / 2.4GHZ / Peak Gain 2.5DB J1 Mini RF Header Receptacle J2 CON Male 1x3 / Pitch 2.0 mm J3 CON Male 1x2 / Pitch 2.0 mm J6,J7 C1,C3 CAP 0402 / 10pF / 50V / NPO / ±5% C4,C5 CAP 0402 / 1uF / X5R / 6.3V / ±10% / HF Female Header / Fool Proof H:4.3 / 2x10 / Pitch 1.27mm / SMT R1,R2,R3,R4,R5,R6,R8,R9, R10,R11,R13,R15,R16, RES 0402 / 0R / Jumper R17,R18,R19,R20,R21 10 R14 RES 0603 / 0R / Jumper Table 6. BOM of WG1300-00 EM Board Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 9 Doc No: WG1300-00 EM Board-UG-D01 3. APPLICATION DEVELOPMENT Texas Instrument had developed a HOST platform, MSP-EXP430FR5730, for evaluating CC3000-based SiP Module. Figure 4 shows the platform and WG1300-00 EM Board Figure 4. MSP-EXP430FR5730 and WG1300-00 EM Board The MSP-EXP430FR5739 test platform can be ordered as the link below. http://www.ti.com/tool/msp-exp430fr5739 Specific application examples can refer to the link below http://processors.wiki.ti.com/index.php/CC3000 Wi-Fi for MCU Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 10 Doc No: WG1300-00 EM Board-UG-D01 4. HISTORY CHANGE Revision Date Description R 0.1 Release 0.1 2012/2/28 Copyright © JORJIN TECHNOLOGIES INC. 2012 http://WWW.JORJIN.COM.TW CONFIDENTIAL Page 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2012:03:02 09:29:11+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:07:06 14:14:53+08:00 Metadata Date : 2012:07:06 14:14:53+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : Microsoft Word - CC3000-WG1300E00-UG-R01_20120302 Creator : Administrator Document ID : uuid:bc560c40-06fd-4aee-8491-1343f4079770 Instance ID : uuid:89fe9949-9e55-4916-bbb8-550ed9d5506e Page Count : 12 Author : AdministratorEXIF Metadata provided by EXIF.tools