LG Electronics USA 3G1XOUTBTS STAREX-IS 1900 Outdoor BTS User Manual STAREX IS User s Manual

LG Electronics USA STAREX-IS 1900 Outdoor BTS STAREX IS User s Manual

Users Manual Part 4

STAREX-IS BSM Manual Page:564(877)Issue:1.0SMD-011-PMA210 4.9.6.3. Directions for Use The direction is configured with full of drawings. Refer to the STMX, TRMX Block for detailed operation. Press stmGUI among the buttons of Manager. Fig. 4.9-16 stmGUI Start Icon Then the following screen is displayed. Fig. 4.9-17 stmGUI Main Screen
STAREX-IS BSM Manual Page:565(877)Issue:1.0SMD-011-PMA210 The figure above shows the status that the highest-grade alarm of the BSC0 is the critical alarm and the highest alarm of the BTS0, major alarm, is generated. 4.9.6.3.1. BTS Name Display. Fig. 4.9-18 Display Screen of BTS Name. e.g.) On the figure above, ghjeong is the real name of the BTS and BTS 0 is the BTS ID. 4.9.6.3.2. Main Menu Fig. 4.9-19 Main Menu Hide : It is used when hiding RACK and SHELF simultaneously from the screen. Update : It is used in compulsory loading of initial value upon deletion and extension by MMC. Exit : It ends the program. 4.9.6.3.3. Color by the Alarm Grade Fig. 4.9-20 Alarm Color Red : Critical Orange : Major Green : Minor Azure : Normal
STAREX-IS BSM Manual Page:566(877)Issue:1.0SMD-011-PMA210 Gray : BTS Is Not Equipped
STAREX-IS BSM Manual Page:567(877)Issue:1.0SMD-011-PMA210 4.9.6.3.4. Status Color. Fig. 4.9-21 Status Color Tone 4.9.6.3.5. Processor Status Fig. 4.9-22 Processor Status (CAN) Fig. 4.9-23 Processor Status (BSC) Normal A Side ActiveDual Processor Single ProcessorNormal A Side ActiveDual Processor Single Processor
STAREX-IS BSM Manual Page:568(877)Issue:1.0SMD-011-PMA210 Fig. 4.9-24 Processor Status (BTS) 4.9.6.3.6. Rack View To see the shape of BSC/BTS one should press the corresponding button. Select a BSC. Fig. 4.9-25 BSC Selection Select a BTS. Fig. 4.9-26 BTS Selection
STAREX-IS BSM Manual Page:569(877)Issue:1.0SMD-011-PMA210 . 4.9.6.3.7. Rack Shape Diagram. The following shape appears if CAN, BSC or BTS is chosen. 4.9.6.3.7.1. CAN Rack Fig. 4.9-27 CAN Rack Shape. The color of each slot manifests the alarm information of equipped cards. For example, the yellow color of BCRA, PIPA and FERA in the 4th shelf of the left side shows that the alarm is generating at Major status.
STAREX-IS BSM Manual Page:570(877)Issue:1.0SMD-011-PMA210 4.9.6.3.7.2. BSC Rack Fig. 4.9-28 BSC Rack
STAREX-IS BSM Manual Page:571(877)Issue:1.0SMD-011-PMA210 4.9.6.3.7.3. BTS Rack Fig. 4.9-29 BTS Rack
STAREX-IS BSM Manual Page:572(877)Issue:1.0SMD-011-PMA210 4.9.6.3.7.4. Slot Shape Diagram. The corresponding dialog box is displayed upon clicking slot in the rack shape diagram. Fig. 4.9-30 card click example. The following dialog box appears upon clicking SLPA card above. Fig. 4.9-31 e.g.)Dialog box- card Information Memo: Stores the edited results temporarily. Edit: Edit button clickclick Alarm정보상태정보Board nameAlarm message형상위치정보TimememoAlarmInfo상태정보Status InfoBoard nameAlarm messageAlarm message형상위치정보Shape Location InfoTimeTimememo
STAREX-IS BSM Manual Page:573(877)Issue:1.0SMD-011-PMA210 Cancel: End button Save: Stores the edited. 1,2,3,4,5 button: The memo is stored in numerical order. Click numbers in right side(1,2,3,4,5) to see the memo. Fig. 4.9-32 e.g.)Dialog box-Vocoder Element Status For example, the SK_Qcelp type call in the VCE0 of DSP1 is in busy status. Fig. 4.9-33 e.g.)Dialog box-DBPA Chip Status
STAREX-IS BSM Manual Page:574(877)Issue:1.0SMD-011-PMA210 4.9.6.3.7.5. Status Display Fig 4.9-34 Display Status by Board 4.9.6.3.7.6. Alarm Display Fig. 4.9-35 Alarm Display by Board. 4.9.6.4. Suggestions on Operation. 4.9.6.4.1. Status Management The status and alarm are displayed in turn at 2-minute intervals in managing each board. If there is no Alarm it displays the status color. 4.9.6.4.2. The Order of Priority The stmGUI receives the process results of the status block (STMX) and fault block (TRMX) to reprocess them. Therefore, both of the two blocks should be normally operated for the normal operation. If the initial data setup of STMX has not been done while BSM is running, stmGUI may display undefined values. In this case, press update
STAREX-IS BSM Manual Page:575(877)Issue:1.0SMD-011-PMA210 button to initialize the value again.
STAREX-IS BSM Manual Page:576(877)Issue:1.0SMD-011-PMA210 4.9.6.4.3. End Use Exit button in the main screen to end the program. It is undesirable using command kill or xkill. Proper procedure is recommended. 4.9.7. Neighbor Control Window (neighbor) 4.9.7.1. Overview. Graphic neighbor is a tool that helps addition and deletion of the information related to the BTS neighbor. User can view, add and delete the information related to neighbor using the existing MMC but it requires the user to input lots of data. Therefore, graphic neighbor minimize the input amount of user for user’s convenience. 4.9.7.2. Environment Setup. Refer to the environment setup of stmGUI. 4.9.7.3. Directions for Use Most of the directions are constituted of drawings and refer to the CDMX for detailed operation. Press neighbor among the buttons of Manager to start. Fig. 4.9-36 Neighbor Start Icon The following initial screen appears.
STAREX-IS BSM Manual Page:577(877)Issue:1.0SMD-011-PMA210 Fig. 4.9-36 Neighbor Initial Screen
STAREX-IS BSM Manual Page:578(877)Issue:1.0SMD-011-PMA210 4.9.7.3.1. Main Menu Fig. 4.9-37 Main Menu Screen User can select a function in this screen. Select : select or change the BTS or sector. For selection, select a BTS first and then select a sector in the BTS. Delete : delete the neighbor in the presently selected sector. Press sector to be deleted after selection. Add : add neighbor into the presently selected sector. Press a sector to be added after selection. NewAdd : add a neighbor of other MSC into the presently selected sector. Input information into the window field appeared after selection. (There is no default value) 4.9.7.3.2. BTS Selection There are two methods for selecting BTS. Surely, the BTS subjected to the MSC of the presently operating system can be selected. 4.9.7.3.2.1. Method using Map. Fig. 4.9-38 Full Map Dragging mouse can search the desired location here. Click BTS (label : x-y ) in the
STAREX-IS BSM Manual Page:579(877)Issue:1.0SMD-011-PMA210 desired location with this method and press the sector of the BTS to select. 4.9.7.3.2.2. Selection Method by BTS ID. Fig. 4.9-39 Random BTS Selection BSC : It is the BSC to which the BTS belongs. BTS : It is the BTS ID of the BTS. Press OK button to complete the selection. 4.9.7.3.2.3. Selection Example. Fig.4.9-40 Initial Screen (Before selecting BTS ) Fig. 4.9-41 After selecting BTS. Fig. 4.9-42 After selecting Sector(Green: neighbor).
STAREX-IS BSM Manual Page:580(877)Issue:1.0SMD-011-PMA210 4.9.7.3.3. Neighbor Information Fig. 4.9-43 Neighbor Information Screen The own neighbor list checking is possible through the information in the lower part or the green tinted sector. Selected SectorNeighborSelected BSC,BTSBSC IDBTS IDSelected Sector InformationNeighbor Information
STAREX-IS BSM Manual Page:581(877)Issue:1.0SMD-011-PMA210 4.9.7.3.4. Neighbor Addition The following window appears after selecting neighbor to be added. Fig. 4.9-44 Inputting neighbor belongs to mother MSC Adding neighbor belongs to the mother MSC requires the user to input just 4~6 fields. Fig. 4.9-45 Inputting neighbor belongs to other MSC
STAREX-IS BSM Manual Page:582(877)Issue:1.0SMD-011-PMA210 Adding neighbor belongs to other MSC requires the user to input all the information. Fig. 4.9-46 Default Value upon Input Select a field to be input then the system shows the default values. To select a value input the value onto the corresponding input space or select one among the values in the lower part with mouse. Press OK after the input is done or press Cancel to return to the Main screen. 4.9.7.3.5. Neighbor Deletion Deletion can be completed with two kinds of method. Press the corresponding line in the lower part or press the BTS sector button. 4.9.7.4. Suggestions in Operation 4.9.7.4.1. The order of priority Graphic Neighbor is a tool for adding/deleting neighbors. Therefore, performing extension or deletion with MMC can bring out a wrong result while the Graphic Neighbor is being used. And if it is performed the user should run the Graphic Neighbor once again. The neighbor intercommunicates with the configuration block (CDMX) through MMI block. Consequently, the two blocks should be in normal operation.
STAREX-IS BSM Manual Page:583(877)Issue:1.0SMD-011-PMA210 4.9.8. Call Trace Window 4.9.8.1. Overview. Call Trace Window is a tool that shows all kinds of call trace information for a specific for a specific MS onto the GUI (Graphic User Interface) screen of the user’s terminal. Call trace command can be executed and the results can be checked through the existing MMC or dedicated window for call trace. The user can set time as long as he want with Timer for the maximum of two MS to trace calls. 4.9.8.2. Environment Setup Refer to the environment setup of stmGUI . 4.9.8.3. Directions for Use. Most of the directions are constituted of drawings and refer to the TSMX Block for detailed operation. Press call among the buttons of Manager to start. Fig. 4.9-47 Call Trace Start Icon Then the following screen appears.
STAREX-IS BSM Manual Page:584(877)Issue:1.0SMD-011-PMA210 Fig. 4.9-48 Call Trace Initial Screen
STAREX-IS BSM Manual Page:585(877)Issue:1.0SMD-011-PMA210 4.9.8.3.1. Sub Menu. 단말번호CDMA CHUser Zone ID착신측번호Reverse Radio Config단말 고유 넘버Packet Zone IdRelease ReasonService optionFrame OffsetRound Trip DelayForward Radio Configuration Fig. 4.9-49 Call Information. Forward Frame Error RateTraffic Channel GainReverse Frame Error Rate신호대 잡음비Forward Power ControlForwad sideReverse side Fig. 4.9-50 Call Quality
STAREX-IS BSM Manual Page:586(877)Issue:1.0SMD-011-PMA210 기지국 정보Forward Walsh Forward Quais Orgonal FunctionReverse Supplement CHannelForward Supplement CHannelReverse Walsh섹터 정보 Fig. 4.9-51 SCH Information Forward data rateTotal Reverse data rateReverse data rate Total Forward data ratePacket State (Dormant or Active) Fig. 4.9-52 Packet Data Information 단말번호 BSC ID BTS ID Trace Time FER Report Interval Time Fig. 4.9-53 Command Window
STAREX-IS BSM Manual Page:587(877)Issue:1.0SMD-011-PMA210 Input MS number (IMSI), BSC ID, BTS ID, Trace Time and FER Report Interval Time into the command window of [Fig. 4.8-53], and press Go Trace button below, then the call trace starts. Press Stop Operation beside Go Trace button to stop the process during the operation and press Exit Program to end call trace program. The Expand Flow shows the flow to the PDSN upon clicking it. Click !!2개로 분할된 window Fig. 4.9-54 Example of Expand Flow Button If the user wants to see the expand flow hidden by the window at the right side after call test, click Expand Flow button to see the expand flow.
STAREX-IS BSM Manual Page:588(877)Issue:1.0SMD-011-PMA210 Click !!하나로 통합된 window Fig. 4.9-55 Example of Shrink Flow Button To see the hidden window (Call Information, Call Quality, Handoff Activity at the right) click Shrink Flow button.
STAREX-IS BSM Manual Page:589(877)Issue:1.0SMD-011-PMA210 4.9.8.3.2. Voice Call 4.9.8.3.2.1. Origination Call (Voice Call Setup / Origination) ----- Fig. 4.9-56 Voice Call Setup / Origination It is FLOW that shows voice originating call process procedure and System Information, Call Information and Call Quality Information are represented on it. The handoff information is also represented when the handoff is generated.
STAREX-IS BSM Manual Page:590(877)Issue:1.0SMD-011-PMA210 4.9.8.3.2.2. Termination Call.( Voice Call Setup / Termination) ----- Fig. 4.9-57 Voice Call Setup / Termination It is FLOW that shows the voice originating call process procedure, and System Information, Call Information and Call Quality Information are represented on it. The handoff information is also represented when the handoff is generated.
STAREX-IS BSM Manual Page:591(877)Issue:1.0SMD-011-PMA210 4.9.8.3.3. Data Call 4.9.8.3.3.1. Packet Data Call Setup ----- Fig 4.9-58 Packet Data Call Setup It is FLOW that shows packet data call processing procedure and the System Information, Call Information, Call Quality, Supplemental Channel Information and Packet Data Information are represented on it. The handoff information is also represented on it when the handoff is generated.
STAREX-IS BSM Manual Page:592(877)Issue:1.0SMD-011-PMA210 4.9.8.3.3.2. Packet Data Call Reactivation / Network Initiated ----- Fig. 4.9-59 Packet Data Call Reactivation / Network Initiated It is FLOW that shows processing procedure of the packet data call which fell into the dormant status and then be reactivated by the network side. The System Information, Call Information, Call Quality, Supplemental Channel Information and Packet Data Information are represented. The handoff information is also represented on it when the handoff is generated.
STAREX-IS BSM Manual Page:593(877)Issue:1.0SMD-011-PMA210 4.9.8.3.3.3. Packet Data Call Reactivation / MS Initiated ----- Fig. 4.9-60 Packet Data Call Reactivation / MS Initiated It is FLOW that shows the process procedure of packet data call which fell into the dormant status and then reactivated by the MS; the System Information, Call Information, Call Quality, Supplemental Channel Information and Packet Data Information are represented on it. The handoff information is also represented on it when the handoff is generated.
STAREX-IS BSM Manual Page:594(877)Issue:1.0SMD-011-PMA210 4.9.9. BTS Address Search Window. 4.9.9.1. Overview. The BTS address search program provides the following functions: 1) it can search the corresponding BTS name and address with BSC and BTS number. 2) it can search BSC and BTS number and address with BTS name. 3) it can search BSC and BTS number and name with BTS address. 4.9.9.2. Environment Setup. It use Solaris 2.7 and Informix 7.3.1 as OS. 4.9.9.2.1. Data Files bts_name.info : the file contains BTS name and address 4.9.9.3. Directions for Use. The initial condition is scheduled to configure in the future.
STAREX-IS BSM Manual Page:595(877)Issue:1.0SMD-011-PMA210 질의 window. Result window.Search ButtonBSC,BTS ID로 검색시 사용검색하기 위한입력필드 Fig. 4.9-61 BTS Address Search Window Initial Screen 4.9.9.3.1. File Information Display Enter !! Fig. 4.9-62 File Information Display
STAREX-IS BSM Manual Page:596(877)Issue:1.0SMD-011-PMA210 Press Enter key on any place of the input field to display the file information on the result window. 4.9.9.3.2. Searching with BSC ID. BSC ID BTS ID 기지국이름 기지국 주소 Fig. 4.9-63 Searching with BSC Input desired BSC number and press Enter key to display the result on the result window when searching with BSC_ID. 4.9.9.3.3. Searching by BTS ID. Fig. 4.9-64 Searching by BTS
STAREX-IS BSM Manual Page:597(877)Issue:1.0SMD-011-PMA210 Input desired BTS number and press Enter key to display the result on the result window when searching with BTS_ID. 4.9.9.3.4. Searching with BTS name. 접두어(Prefix)검색. Fig. 4.9-65 Searching with BTS name-1 접두어(Prefix)검색. Fig. 4.9-66 Searching with BTS name-2 If the user input name into the name input field when searching with BTS name, the searching is performed with real-time prefix. For example, the names start with “s” are displayed upon inputting “s”, the names start with “sad” are displayed upon inputting “sad”.
STAREX-IS BSM Manual Page:598(877)Issue:1.0SMD-011-PMA210 4.9.9.3.5. Searching with BTS address. 단어로 검색. Fig. 4.9-67 Searching with BTS Address-1 단어로 검색. Fig. 4.9-68 Searching with BTS Address-2 The BTS addresses are searched with real-time words upon inputting address into the address input field when searching with BTS address. For example, the addresses start with “dong” are displayed upon inputting “dong”, and the addresses start with
STAREX-IS BSM Manual Page:599(877)Issue:1.0SMD-011-PMA210 “dongj” are displayed upon inputting “dongj”.
STAREX-IS BSM Manual Page:600(877)Issue:1.0SMD-011-PMA210 4.9.9.3.6. Searching with Search Button. Search Button Click ! Fig. 4.9-69 Searching with Search Button. Search Button provides the following functions: 1) simultaneous searching for BSC_ID and BTS_ID 2) single searching for BSC_ID or BTS_ID 4.9.9.4. Suggestions for Operation. 4.9.9.4.1. The Order of Priority. BTS address searching program is a graphic tool that provides the following function: 1) searching BTS name and address with BSC ID and BTS ID, 2) searching BSC ID, BTS ID, and address with name, 3) searching BSC ID, BTS ID, and name with address. The address search program should be rerun when inserting, deleting or modifying the data of the bts_name.info file that includes BTS information. The Informix should be normally run because the Informix db is used for searching.

Navigation menu