LG Electronics USA 50PC3DUUE Plasma Display Panel User Manual 38289U0527F LG PDP

Download:
Mirror Download [FCC.gov]
Document ID	688090
Application ID	EceCg6Yg+9mmeMiSFxEVKQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	202.17kB (2527077 bits)
Date Submitted	2006-07-31 00:00:00
Date Available	2006-07-31 00:00:00
Creation Date	2006-07-29 10:25:11
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2006-07-29 10:25:40
Document Title	38289U0527F(LG) -PDP
Document Creator	QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Document Author:	PSY

LCD TV
PLASMA TV
MODELS: 32LC2DU
37LC2DU
42LC2DU
MODELS: 42PC3DU
42PC3DVU
50PC3DU
60PC1D
OWNER’S MANUAL
Internet Home Page : http://www.lge.com
http://www.lg.ca
ENERGYSTAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this
product meets the ENERGY STAR guidelines for
energy efficiency.
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
P/NO : 38289U0527F a
Printed in Korea
Warning
Warning
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
NOTE TO CABLE/TV INSTALLER:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric
Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
CAUTION:
Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation.
Unauthorized modification could void the user’s authority to operate this product.
COMPLIANCE:
The responsible party for this product’s compliance is:
LG Electronics U.S.A., Inc.
1000 Sylvan Avenue, Englewood Cliffs, NJ 07632
Phone: 1-800-243-0000
http://www.lgusa.com
Safety Instructions
Safety Instructions
WARNING :
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
Ow
ner's
Man
ual
2. Keep these instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
9. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. When the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
6. Clean only with a dry cloth.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturer’s instructions.
11. Only use the attachments / accessories specified by
the manufacturer.
Safety Instructions
12. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving
the cart / apparatus combination to avoid injury from
tip-over.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
15. DISCONNECTING DEVICE FROM MAINS
Main plug is the disconnecting device.The
plug must remain redily operable.
Note
- If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on. This is normal, there is nothing wrong with TV.
- Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have
no adverse effect on the monitor's performance.
- Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some
temporary distortion effects on the screen.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords,
or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
On Disposal
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
Contents
Introduction
Contents
Warnings
3~4
Safety Instructions
Accessories
Controls (Model Name: 50PC3DU / 60PC1D)
Connection Options (Model Name: 50PC3DU / 60PC1D)
10
Controls (Model Name: 32/37/42LC2DU)
11
Connection Options (Model Name: 32/37/42LC2DU)
Operation
Installation
12~13 Remote Control Key Functions
14
15
16~17
Attaching the TV to a wall
Desktop Pedestal Installation
Basic Connection
18
19~20
20
21~22
23~24
25
25
26~28
Antenna or Cable Connection
VCR Setup
External AV Source Setup
DVD Setup
HDSTB Setup
AV Out Setup
Digital Audio Output
PC Setup
Basic operation
29
29
29
29
30
Turning on the TV
Volume Adjustment
Channel Selection
On Screen Menus Language Selection
On Screen Menus Selection and Adjustment
Setup Menu
Options
31
31
32
33
33
34
EZ Scan (Channel Search)
Manual Scan
Channel Edit
DTV Signal Strength
Input Source
Input Label
Video Menu
Options
35
35~36
37
38
39
Auto Picture Control(EZ Picture)
Color Temperature Control
XD
Advanced-Cinema 3:2 Mode / Black Level
Video Reset
40
41
41~42
43
43
Audio Language
Auto Sound Control(EZ Sound)
Manual Sound Control (EZ Sound-User option)
Balance
TV Speakers On/Off Setup
External
Equipment
Connections
Audio Menu
Options
Contents
Operation
Time Menu
Options
Option Menu
Features
Reference
Lock Menu Options
44
44
45
45
46
Auto Clock Setup
Manual Clock Setup
On/Off Timer Setup
Sleep Timer
Auto Off
47
48
49
49
50
Aspect Ratio Control
Caption/Text
Caption Option
Low Power ( 50PC3DU / 60PC1D only)
ISM (Image Sticking Minimization) Method (50PC3DU / 60PC1D only)
51~52
Parental Lock Setup
53~58
External Control Device Setup
59~60
IR Codes
61
Programming the Remote
62~63
Programming Codes
64~65
Troubleshooting Checklist
65
Maintenance
66~67
Product Specifications
Introduction
Introduction
Accessories
TV
Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the
dealer from where you purchased the product. User must use shielded signal interface cables(D-sub 15 pin cable)
with ferrite cores to maintain standard compliance for the product.
UT
INP
TV
WE
PO
AU
DIO
CA
MO BLE
UT
INP
DV DE
VC
DA
Y-
ME
NU
ST
ID
GU
TE
EN
TIO
RA
Y+
DA
EX
IT
ER
TIM
VO
UT
INP
TE
GE
PA
MU
TV
CC
INF
FA
AU
PO
GE
PA
TV
DIO
CA
ME
PIC
NU
ST
AP
SA
ID
GU
HB
AS
FL
UN
ST
SO
JU
EZ
AD
DA
Y-
EZ
DV DE
MO BLE
1.5V
1.5V
IT
TIO
RA
TE
EN
EX
ZE
EE
Y+
DA
FR
ER
TIM
VO
CC
GE
PA
TE
MU
INF
FA
GE
PA
EZ
HB
AS
FL
UN
ST
SO
JU
EZ
AD
PIC
SA
AP
FR
ZE
EE
Power Cord
75Ω Round Cable
Owner’s Manual
For 42PC3DU/3DVU/
50PC3DU
2-Wall brackets
2-eye-bolts
42PC3DU/3DVU only
2-bolts
(Refer p.14)
Option Extras
Remote Control /
Batteries
For 32/37/42LC2DU
42LC2DU only
32LC2DU only
Polishing Cloth
4-bolts for stand
assembly
Twister Holder
2-TV brackets
Arrange the wires
2-Wall brackets with the twister holder.
2-TV Bracket Bolts
Cable
Management
Polish the TV with
the cloth.
See below for detail
information.
(Refer p.16)
[Polishing Cloth]
Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if
there is stain or fingerprint on surface of the exterior.
Do not wipe roughly when removing stain. Please be cautious of that excessive power may cause
scratch or discoloration.
For 60PC1D
D-sub 15 pin cable
2-TV brackets
2-Wall brackets
4- Bolts
4-RING SPACER
Stand Installation for 32LC2DU
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
Place the hook of the stand in the back of the
product as shown.
Install the 4 bolts provided securely, in the back of the
product.
Introduction
Controls (Model Name:
42PC3DU/3DVU/50PC3DU/60PC1D)
- This is a simplified representation of front panel.
- This picture shown below may be somewhat different from your TV.
42/50PC3DU/42PC3DVU
CHANNEL (D,
Buttons
CH
E)
VOLUME (F,G)
Buttons
VOL
OL
ENTER
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
Remote Control Sensor
(Power) Button
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the set is switched on.
60PC1D
ENTER
ENTER
Remote
Control Sensor
Power Standby Indicator
Illuminates red in standby mode.
Illuminates green when
the set is switched on.
POWER
Button
INPUT
Button
MENU
Button
ENTER
Button
VOLUME
(F,G
G)Buttons
CHANNEL
(E,D
D)Buttons
Introduction
Connection Options
(Model Name: 42PC3DU/3DVU/50PC3DU/60PC1D)
- This picture shown below may be somewhat different from your TV.
AV IN 2
/MONO
S-VIDEO Input
Provides better picture quality
than the video input.
AUDIO Input
Connections are available for listening to stereo sound from an
external device.
VIDEO Input
Connects the video signal from a
video device.
10
SERVICE
AUDIO
VIDEO
VIDEO
1(DVI)
OPTICAL
(MONO)
(CONTROL & SERVICE)
S-VIDEO VIDEO
OUT
AUDIO
S-VIDEO VIDEO
AV OUT AV IN 1
ANTENNA/
CABLE IN
HDMI IN
AV OUT AV IN 1
AUDIO
COMPONENT IN
RGB IN
COMPONENT IN
AUDIO
COMPONENT IN
Connect a component video/audio device to
these jacks.
AV OUT
Connect a second TV or monitor.
AV (Audio/Video) IN 1
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
VIDEO
AUDIO
VIDEO
Remote Control Port
Connect your wired remote control.
AUDIO IN (RGB/DVI)
Connect the monitor output from a PC to the
appropriate input port.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
10 Power
AUDIO
S-VIDEO VIDEO
Cord Socket
For operation with AC power.
Caution:
Never attempt to operate the TV on DC power.
AUDIO
AUDIO
AV OUT AV IN 1
RGB IN (PC)
Connect the monitor output from a PC to the
appropriate input port.
AV OUT AV IN 1
S-VIDEO VIDEO
COMPONENT IN
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
HDMI IN
Connect a HDMI signal to 1(DVI) or 2.
Or DVI (VIDEO)signal to the 1(DVI) port with a
DVI to HDMI cable.
COMPONENT IN
Introduction
Controls (Model Name: 32/37/42LC2DU)
- This is a simplified representation of front panel.
- This picture shown below may be somewhat different from your TV.
CH
VOL
ENTER
CHANNEL (D,
Buttons
E)
VOLUME (F,G)
Buttons
ENTER Button
MENU
MENU Button
INPUT
INPUT Button
(Power) Button
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby
mode.
• illuminates green when the set
is switched on.
Swivel Stand (42LC2DU Only)
- The TV can be conveniently swivelled on its stand 30° to
the left or right to provide the optimum viewing angle.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:892615fb-ac6e-4321-9cac-0f1f54dc54aa
Modify Date                     : 2006:07:29 10:25:40+09:00
Create Date                     : 2006:07:29 10:25:11+09:00
Metadata Date                   : 2006:07:29 10:25:40+09:00
Document ID                     : uuid:85de820e-4539-4946-bf1d-d87a147b7112
Format                          : application/pdf
Title                           : 38289U0527F(LG) -PDP
Creator                         : QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Author                          : PSY
Producer                        : Acrobat Distiller 4.0 for Macintosh

EXIF Metadata provided by EXIF.tools