LG Electronics USA 50PC3DUUE Plasma Display Panel User Manual 38289U0527F LG PDP

LG Electronics USA Plasma Display Panel 38289U0527F LG PDP

User Manual 3

Download: LG Electronics USA 50PC3DUUE Plasma Display Panel User Manual 38289U0527F LG PDP
Mirror Download [FCC.gov]LG Electronics USA 50PC3DUUE Plasma Display Panel User Manual 38289U0527F LG PDP
Document ID688093
Application IDEceCg6Yg+9mmeMiSFxEVKQ==
Document DescriptionUser Manual 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize158.69kB (1983652 bits)
Date Submitted2006-07-31 00:00:00
Date Available2006-07-31 00:00:00
Creation Date2006-07-29 10:28:49
Producing SoftwareAcrobat Distiller 4.0 for Macintosh
Document Lastmod2006-07-29 11:50:33
Document Title38289U0527F(LG) -PDP
Document CreatorQuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Document Author: PSY

Operation
Channel Edit
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
Selection ( G or
) leads
you to the channel edit
screen.
* Custom List
- There are two different ways in
order to add or delete scanned
channels. One is "Custom List"
and the other is "Favorite List" in
the channel list. Both of them are
available after EZ Scan on the
SETUP menu.
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button. You will now see a screen filled with channel numbers and a preview picture.
- A Custom List can be created by
toggling each channel on or off
with ENTER button. The channels in the Custom List are displayed in black color, and the
channels deleted from the
Custom List are displayed in gray
color. Once a channel is highlighted you can add or delete the
channel by referring to the small
window at the top-left corner of
the screen.You can create your
own Favorite List. Use the FAV
button on the remote control
when a channel is highlighted
and then you can add or delete
the channel to/from the Favorite
List.
Use D / E / F / G button to select a channel and then use the ENTER
button to add or delete it. Press FAV button to add the channel to the
Favorite List. The heart-mark will appear in front of that channel number.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
32
Press the G button and then use D
/E
button to select Channel Edit.
Operation
Setup Menu Options continued
DTV Signal Strength
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
- Shows how strong your DTV signal is and whether you need to
adjust your antenna or digital
cable input. The higher the signal
strength, the less likely you are
to experience picture degradation.
- DTV Signals: Only when the
input signal is DTV or CADTV,
this function is available.
Bad
Normal
Good
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use
D /E
button to select DTV Signal.
View the on-screen signal strength monitor to see the quality of the signal
being received.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Input Source
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
- Changes the picture source so
you can watch your TV, cable TV,
VCR, DVD, or any other devices
that are connected to your TV.
TV
AV1
AV2
Component1
Component2
RGB-PC
HDMI1/DVI
HDMI2
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use D
/E
button to select Input Source.
Press the G button and then use D / E button to select the source:
TV, AV1, AV2, Component1, Component2, RGB-PC, HDMI1/DVI, or
HDMI2.
• To toggle RGB-PC, select RGB-PC and press G button.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
33
Operation
Input Label
EZ Scan
EZ Scan
Manual Scan
Manual Scan
Channel Edit
Channel Edit
DTV Signal
DTV Signal
Input Source
Input Source
Input Label
Input Label
Set ID
Set ID
- Sets a label to each input source
or lets you skip the input source
which is not in use when you
press INPUT button.
34
AV1
Cable Box
AV2
VCR
Component1
DVD
Component2
Set Top Box
RGB-PC
PC
HDMI1/DVI
Game
HDMI2
Satellite
Press the MENU button and then use D / E button to select the SETUP menu.
Press the G button and then use D
/E
button to select Input Label.
Press the G button and then use D / E button to select the source: AV12, Component1-2, RGB-PC, HDMI1/DVI or HDMI2.
Press the
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
F /G
button to select the label.
Operation
V ideo Menu Options
Auto Picture Control ( EZ Picture)
- EZ Picture adjusts the TV for the best
picture appearance. Select the preset
value in the EZ Picture menu based
on the program category.
- Daylight, Normal, Night Time settings are preset for optimum picture
quality at the factory and are not
adjustable.
- In the User 1, and User 2 modes only,
user can directly adjust the contrast,
brightness, color, sharpness, tint.
Press the EZ Pic button repeatedly to select the picture appearance setup option as shown below:
Daylight, Normal, Night Time, User 1 and User 2(your own settings).
• You can also use the VIDEO menu to adjust EZ Picture.
Press the EXIT button to save and return to TV viewing .
Color Temperature Control
EZ Picture
EZ Picture
Color Temperature
Color Temperature G
Cool
XD
XD
Medium
Advanced
Advanced
Warm
Video Reset
Video Reset
User
- Choose one of three automatic
color adjustments. Set to warm
to enhance hotter colors such as
red, or set to cool to see less
intense colors with more blue.
Press the MENU button and then use D / E button to select the VIDEO menu.
Press the G button and then use D / E button to select Color Temperature.
Press the G button and then use D
Medium, Warm, or User.
/E
button to select either Cool,
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
35
Operation
Manual Color Temperature Control
EZ Picture
EZ Picture
Color Temperature
Color Temperature
Cool
XD
XD
Medium
Advanced
Advanced
Warm
Video Reset
Video Reset
User
Selection ( G or
) leads you
to the detailed setting
screen.
Red
User
Red
Green
Blue
Press
- You can also adjust the detailed set
tings(Red, Green, Blue) by selecting
the User menu.
36
MENU
to confirm.
Press the MENU button and then use
VIDEO menu.
Temperature .
Press the
button and then use
D /E
D /E
button to select the
button to select Color
Press the G button and then use D
/E
button to select User .
Press the G button and then use D
Green or Blue .
/E
button to select Red,
Press the G button and then use F / G button to make appropriate adjustments.
• The adjustment range of Red, Green or Blue is -20~ +20.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Operation
XD
EZ Picture
EZ Picture
Color Temperature
Color Temperature
XD
XD
Advanced
Advanced
Video Reset
Video Reset
- XD is LG Electronic’s unique picture
improving technology to display a
real HD source through an
advanced dig-ital signal processing
algorithm.
- When selecting EZ Picture options
(Daylight, Normal and Night time),
XD is automatically change to Auto.
- When selecting EZ Picture options
(User 1 and User 2), you can
choose the Auto / Manual and when
selecting Manual, you can adjust
the XD Contrast, XD color and XD
Noise.
XD Contrast On
Press the MENU button and then use D
menu.
Press the
button and then use
Manual
/E
D /E
Press the G button and then use D
Manual.
/E
XD Color
On
XD Noise
On
button to select the VIDEO
button to select XD.
button to select Auto or
* Selecting the Manual
1. Press the G button and then use F / G button to select XD
Contrast, XD Color or XD Noise.
XD Contrast :Optimizing the contrast automatically according
to the
brightness of the reflection.
XD Color :Adjusting the colors of the reflection automatically
to repro-duce as closely as possible to the natural colors.
XD Noise :Removing the noise up to the point where it does
not damage the original picture.
2. Use the
D /E
button to make appropriate adjustments.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
37
Operation
Advanced-Cinema 3:2 Mode / Black Level
EZ Picture
EZ Picture
Color Temperature
Color Temperature
XD
XD
Advanced
Advanced
Video Reset
Video Reset
• Cinema 3:2 Mode
- Set up the TV for the best picture
appearance for viewing movies.
When you operate Cinema (3:2 PullDown Mode or Cinema Correction
Mode),the TV will adjust 24 fps video
from movies to 30 fps video for display
(This function is only available in
Analog,AV1,AV2,Component 480i
mode.)
• Black level
- Adjusting the contrast and the brightness
of the screen using the black level of the
screen.
This feature operates only in HDMI1/DVI
, HDMI2 or AV1, AV2 mode.
Cinema 3:2 Mode
Black Level
Off
Low
1 Press the MENU button and then use D / E button to select the VIDEO
menu.
the G
2 Press
Advanced .
button and then use
/ E
button to select
Press the G button and then use D / E button to select
3 Cinema
3:2 Mode or Black Level.
* Selecting the Cinema 3:2
* Selecting the Black Level
Mode
Press the
4 use
button and then
D /E
button to select On or Off .
Press the G button and then
use D / E
button to select Low or
High.
Low
The reflection of the screen gets
darker.
High
The reflection of the screen gets
brighter.
Press EXIT button to return to TV viewing or press MENU button
5 to
return to the previous menu.
38
Operation
Video Reset
EZ Picture
EZ Picture
Color Temperature
Color Temperature
XD
XD
Advanced
Advanced
Video Reset
Video Reset
- Use to quickly reset all the Video
menu options to their original factory preset values.
Selection ( G or
) resets to
the factory settings (default).
Press the MENU button and then use D / E button to select the VIDEO menu.
Press the
button and then use
D /E
button to select Video Reset.
Press the G button to reset the Video menu options to original values.
39
Operation
Audio Menu Options
Audio Language
Audio Language
Audio Language
EZ Sound
EZ Sound
Balance
Balance
TV Speaker
TV Speaker
- Other languages may be available
if a digital signal is provided by the
broadcasting station.
40
English
Spanish
French
Press the MENU button and then use
AUDIO menu.
Press the G button and then use D / E button to select Audio Language.
Press the G button and then use
Spanish, or French.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
D / E
D / E
button to select the
button to select: English,
Operation
Auto Sound Control ( EZ
- EZ Sound lets you enjoy the best
sound without any special adjustment because the TV sets the
appropriate sound options based
on the program content.
Sound)
Press the EZ Sound button repeatedly to select the appropriate sound
setup as shown below :
Normal, Stadium, News, Music, Theater and User (your own
settings) .
• You can also adjust EZ Sound in the AUDIO menu.
- Normal,Stadium,News,Music
and Theater are preset for good
sound quality at the factory and
are not adjustable.
Press EXIT button to save and return to TV viewing.
Manual Sound Control (EZ Sound-User option)
Audio Language
EZ Sound
Balance
TV Speaker
BBE
Normal
Stadium
News
Music
Theater
User
User
Treble
50
Bass
50
Front Surround
Off
Selection ( G or
) leads you
to the detailed setting
screen.
Press
- Adjust the sound in your preference and surrounded environment.
MENU
to confirm.
Press the MENU button and then use
AUDIO menu.
Press the
button and then use
D /E
button to select EZ Sound.
Press the
button and then use
D /E
button to select User.
Press the G button and then use D / E button to select the desired sound
option (Treble, Bass or Front Surround).
Press the G button and then use F
adjustments.
/G
D / E
button to select the
button to make appropriate
41
Operation
* Selecting the Front Surround
Press the G button and then use F / G button to select Off
or SRS (Sound Retrieval System) TruSurround XT .
front Surround
SRS TruSurround XT
Note: When SRS (Sound Retrieval System) TruSurround XT is
selected, Audio Balance function is disable and set to 0 .
When Off is selected, Audio Balance function is enable and reset the balance as previous.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
SRS TruSurround XT
Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity,
bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from
standard stereo material.
42
Operation
Balance
- Adjust the sound in your preference and surrounded environment.
Audio Language
Audio Language
EZ Sound
EZ Sound
Balance
Balance
TV Speaker
TV Speaker
Press the MENU button and then use D / E button to
1 select
the AUDIO menu.
2 Press the G
button and then use D
/E
button to select
Balance.
Balance
Press the G button and then use F
appropriate adjustments.
/ G button
to make
4 Press
EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
TV Speakers On/Off Setup
Audio Language
Audio Language
EZ Sound
EZ Sound
Balance
Balance
TV Speaker
TV Speaker
- Turn TV speakers off if using
external
audio
equipment.
Feature turns the TV Speakers
option On or Off.
Off
On
Press the MENU button and then use
AUDIO menu.
Press the
button and then use
D /E
button to select TV Speaker.
Press the
button and then use
D /E
button to select Off or On.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
D / E
button to select the
43
Operation
T ime Menu Options
Auto Clock Setup
Auto Clock
Auto Clock
Manual Clock
Manual Clock
Off Timer
Off Timer
On Timer
On Timer
Sleep Timer
Sleep Timer
Auto Off
Auto Off
- The current time will be set automatically from a digital channel
signal provided by the broadcasting station.
- Set the clock manually, if the current time is set incorrectly by the
auto clock function.
Off
On
Time Zone
Eastern
Daylight
Saving
Auto
Press the
button and then use
D /E
button to select Auto Clock.
Press the
button and then use
D /E
button to select On.
Press the G button and then use D / E button to select your viewing
area time zone.
• U.S.A: Eastern, Central, Mountain, Pacific, Alaska, or Hawaii.
• Canada: Eastern, Central, Mountain, Pacific, New F.land, or
Atlantic.
Press the G button and then use D / E button to select Auto, Off, On,
depending on whether or not your viewing area observes Daylight
Saving time.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Press the MENU button and then use D / E button to select the TIME menu.
Manual Clock Setup
Auto Clock
Auto Clock
Manual Clock
Manual Clock
Off Timer
Off Timer
On Timer
On Timer
Sleep Timer
Sleep Timer
Auto Off
Auto Off
- If current time setting is wrong,
reset the clock manually.
44
Year
Date
Time
---
---/ -: --
--
Press the MENU button and then use D / E button to select the TIME menu.
Press the
button and then use
D / E
button to select Manual
Clock.
Press the G button and then use F / G button to select either the year,
date, or time option. Once selected, use the D / E button to set the year,
date, and time options.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Operation
On/Off Timer Setup
Auto Clock
Auto Clock
Manual Clock
Manual Clock
Off Timer
Off Timer
On Timer
On Timer
Sleep Timer
Sleep Timer
Auto Off
Auto Off
- Timer function operates only if
current time has been set.
- Off-Timer function overrides OnTimer function if they are set both
set to the same time.
- The TV must be in standby mode
for the On-Timer to work.
- If you do not press any button
within 2 hours after the TV turns
on with the On Timer function,
the TV will automatically revert to
standby mode.
Off
On
Time
Ch.
Vol
6 : 30 AM
TV 2-0
17
Press the MENU button and then use D / E button to select the TIME menu.
Press the G button and then use D / E button to select On.
• To cancel On/Off Timer function, select Off.
Press the
button and then use
D /E
button to set the hour.
Press the
button and then use
D /E
button to set the minutes.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Press the
button and then use
D /E
button to select Off Timer or
On Timer.
For only On Timer function
Press the G button and then use D / E button to select the channel at
turn-on.
Press the G button and then use D / E button to set the sound level at
turn-on.
Sleep Timer
- The Sleep Timer turns the TV off
at the preset time. Note that this
setting is cleared when the TV is
turned off.
- You can also set up the Sleep
Timer in the TIME menu.
Press the TIMER button repeatedly to select the number of minutes.
First the Off option appears on the screen, followed by the following
sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
When the number of minutes you want is displayed on the screen,
press the TIMER button. The timer begins to count down from the number of minutes selected.
To check the remaining minutes before the TV turns off, press the
TIMER button once.
To cancel the Sleep Timer, press the TIMER button repeatedly to select Off.
45
Operation
T ime Menu Options continued
Auto Off
Auto Clock
Auto Clock
Manual Clock
Manual Clock
Off Timer
Off Timer
On Timer
On Timer
Sleep Timer
Sleep Timer
Auto Off
Auto Off
- If the TV is on and there is no
input signal, the TV turns off
automatically after 10 minutes.
46
TV will be automatically
turned off, in case of No
Signal for 10 minutes.
Off
On
Press the MENU button and then use D / E button to select the TIME menu.
Press the
button and then use
D /E
button to select Auto Off.
Press the
button and then use
D /E
button to select Off or On.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Operation
Option Menu Features
Aspect Ratio Control
Set by program
Horizon
Selects the proper picture proportion to match the source’s
The screen size is, more enlarged at both sides, to create
image.
a spectacular view.
(4:3
4:3)
(16:9
16:9)
Horizon
Set By Program
Set By Program
Zoom 1
4:3
Choose Zoom 1 when you want to view the picture with-
Choose 4:3 when you want to view a picture with an original
out any alteration. However, the top and bottom portions
4:3 aspect ratio.
of the picture will be cropped.
4:3
Zoom 1
16:9
Adjust the picture horizontally, in a linear proportion to fill the
entire screen.
Zoom 2
Choose Zoom 2 when you want the picture to be altered,
both vertically extended and cropped. The picture taking a
halfway trade off between alteration and screen coverage.
16:9
Zoom 2
- This feature allow an analog picture with 4:3
aspect ratio to be displayed in a different proportion. When 4:3 analog signal is received on the
16:9 TV, personally preferred aspect ratio needs
to be specified.
- RGB-PC/DVI-PC input source use 4:3 or 16:9
aspect ratio.
the RATIO button repeatedly to select the
1 Press
desired picture format.
• You can also adjust the Aspect Ratio in the
OPTION menu.
47
Operation
Option Menu Features continued
Caption/Text
* Analog Broadcasting System Captions
Aspect Ratio
Aspect Ratio
Caption/Text
Caption/Text
Caption Option
Caption Option
Language
Language
ISM Method
ISM Method
Low Power
Low Power
- Select a caption mode for displaying captioning information if
provided on a program.
- Analog caption displays information at any position on the screen.
- Text displays information, usually
at the bottom position and is
used for a data service.
- Caption/Text, if provided by the
broadcaster, would be available
for both digital and analog channels on the Antenna/Cable.
- This TV is programmed to
remember the caption/text mode
it was last set to, when you turn
the power off.
- Whe you select the CC1~Text4,
Caption Option must be disabled.
Off
CC 1
CC 2
CC 3
CC 4
Text 1
Text 2
Text 3
Text 4
Use the CC button repeatedly to select Caption Off, CC1, CC2, CC3,
CC4, Text1, Text2, Text3, or Text4.
Press EXIT button to save and return to TV viewing.
Press the MENU button and then use
OPTION menu.
Press the G button and then use D
/E
button to select the
D / E
button to select Caption/Text.
Press the G button and then use D / E button to select caption: CC1,
CC2, CC3, CC4, Text1, Text2, Text3, or Text4.
• CAPTION
The term for the words that scroll across the bottom of the TV screen.
• TEXT
The term for the words that appear in a large black frame and almost
cover the entire screen; usually messages provided by the broadcaster.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
* Digital Broadcasting System Captions
Aspect Ratio
Aspect Ratio
Caption/Text
Caption/Text
Caption Option
Caption Option
Language
Language
ISM Method
ISM Method
Low Power
Low Power
- Choose the language you want
the DTV/CADTV Captions to
appear in.
- Other languages can be chosen
for digital sources only if they are
included on the program.
- Caption may not be available
depends if the service is not provided by the digital broadcaster.
48
Press the MENU button and then use
OPTION menu.
Press the G button and then use D
/E
Off
English
Spanish
French
D / E
button to select the
button to select Caption/Text.
Press the G button and then use D / E button to select available caption languages: English, Spanish, or French.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Operation
Caption Option
Aspect Ratio
Aspect Ratio
Caption/Text
Caption/Text
Caption Option
Caption Option
Language
Language
ISM Method
ISM Method
Low Power
Low Power
- Customize the DTV/CADTV captions that appear on your screen.
Press the MENU button and then use
OPTION menu.
Press the G button and then use D
Press the
button and then use
Style
Custom
Size
A Standard
Font
Font 0
Text Color
White
Text Opacity
Solid
Bg Color
Black
Bg Opacity
Solid
Edge Type
None
Edge Color
Black
D / E
button to select the
/ E button to select Caption Option.
F /G
button to select Custom.
Use D / E button to customize the Style, Font, etc., to your preference.
A preview icon is provided at the bottom of the screen, use it to see the
caption language.
• Size: Set the size the words will appear in.
• Font: Select a typeface for the words.
• Text Color: Choose a color for the text.
• Text Opacity: Specify the opacity for the text color.
• Bg (Background) Color: Select a background color.
• Bg (Background) Opacity: Select the opacity for the background color.
• Edge Type: Select an edge type.
• Edge Color: Select a color for the edges.
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Low Power (50PC3D / 60PC1D only)
Aspect Ratio
Aspect Ratio
Caption/Text
Caption/Text
Caption Option
Caption Option
Language
Language
ISM Method
ISM Method
Low Power
Low Power
- Low power reduces the power
consumption of plasma display.
Off
On
Press the MENU button and then use
OPTION menu.
Press the
button and then use
D /E
button to select Low Power.
Press the
button and then use
D /E
button On or Off.
D / E
button to select the
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
49
Operation
Option Menu Features continued
ISM (Image Sticking Minimization) Method (50PC3D / 60PC1D only)
Aspect Ratio
Aspect Ratio
Caption/Text
Caption/Text
Caption Option
Caption Option
Language
Language
ISM Method
ISM Method
Low Power
Low Power
- A frozen still picture from a
PC/video game displayed on the
screen for prolonged periods will
result in a ghost image ; even
though the image is changed.
Use our unique method to minimize any fixed image on the
screen.
Press the MENU button and then use
OPTION menu.
Press the
Press the
button and then use
D /E
button and then use
Normal
White Wash
Orbiter
Inversion
D / E
button to select the
button to select ISM Method.
D / E
button to select Normal,
White Wash, Orbiter or Inversion.
• Normal
If image sticking is never a problem, ISM is not necessary - set to
Normal.
• White Wash
White Wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear
entirely with White Wash. To return to normal viewing, press the any
button.
• Orbiter
Orbiter may help prevent ghost images. However, it is best not to
allow any fixed image to remain on the screen. To avoid a permanent
image on the screen, the image will move once per 2 minutes: Left →
Right → Upside → Downside → Right → Left → Downside → Upside.
• Inversion
Inversion will automatically invert the plasma display panel color every
30 minutes.
50
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Operation
Lock Menu Options
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program
and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use
this function, the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be
blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video
movies use the Movie Rating System (MPAA) only.
For USA
Ratings for Movies previously shown in theaters:
Movie Ratings :
• Blocking Off (Permits all programs)
•G
(General audience)
• PG
(Parental guidance suggested)
• PG-13
(Parents strongly cautioned)
•R
(Restricted)
• NC-17
(No one 17 and under admitted)
•X
(Adult only)
If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked.
Ratings for Television programs including
made-for-TV movies :
• TV-G
• TV-PG
• TV-14
• TV-MA
• TV-Y
• TV-Y7
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
(All children)
(Children 7 years older)
TV Rating-Children:
• Age
• Fantasy Violence
(applies to TV-Y, TV-Y7)
(applies to TV-Y7)
For Canada
TV Rating-English:
•E
(Exempt)
•C
(Children)
• C8+
(8 years and up)
•G
(General programming. Suitable
for all audiences)
• PG
(Parental guidance suggested)
• 14+
(Viewers 14 years and up)
• 18+
(Adult programming)
• Blocking off (Permits all programming)
TV Rating-French:
•E
(Exempt)
•G
(General)
• 8 ans+
(8 years and up)
• 13 ans+
(13 years and up)
• 16 ans+
(16 years and up)
• 18 ans+
(Adults only)
• Blocking off (Permits all programming)
Input Block
• AV 1, 2
(On, Off)
• Component 1, 2
(On, Off)
• RGB, HDMI1/DVI and HDMI2 (On, Off)
TV Rating-General:
• Age (applies to TV-G, TV-PG, TV-14, TV-MA)
• Dialogue- sexual dialogue (applies to TV-PG, TV-14)
• Language- adult language (applies to TV-PG, TV14, TV-MA)
• Sex- sexual situations (applies to TV-PG, TV-14,
TV-MA)
• Violence (applies to TV-PG, TV-14, TV-MA)
Input Block
• AV1, 2
(On, Off)
• Component 1, 2
(On, Off)
• RGB, HDMI1/DVI and HDMI2 (On, Off)
51
Operation
Parental Lock Setup
Lock System
Lock System
Set Password
Set Password
Block Channel
Block Channel
Movie Rating
Movie Rating
TV Rating-Children
TV Rating-Children
TV Rating-General
TV Rating-General
Input Block
Input Block
- Set up blocking schemes to
block specific channels, ratings,
and external viewing sources.
- A password is required to gain
access to this menu if the Lock
System is turned on.
Off
On
Press the MENU button and then use D / E button to select the LOCK
menu. Then, press the G button
• If Lock is already set, enter the password as requested.
• The TV is set up with the initial password “0-0-0-0”.
Use the D / E button to choose from the following Lock Menu options.
Once the option is selected, change the settings to your preference.
• Lock System: Activates or disables the blocking scheme you set up
previously.
• Set Password: Change the password by inputting a new password
twice.
• Block Channel.: Select a channel number that you wish to block.
• Input block: Enables you to select a source to block from the external source devices you have hooked up.
W For USA
• Movie Rating (MPPA): Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You
can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings
limit only applies to movies shown on TV, not TV programs, such as
soap operas.
• TV Rating-Children: Prevents children from watching certain children's TV programs, according to the ratings limit set. The children
rating does not apply to other TV programs. Unless you block certain
TV programs intended for mature audiences in the TV Rating - sub
menu, your children can view those programs.
• If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’ on
the remote control. Then, the
password reset to ‘7’, ‘7’, ‘7’,
‘7’.
• TV Rating-General: Based on the ratings, blocks certain TV programs that you and your family do not want to view.
W For Canada
• TV Rating-English / TV Rating-French: Selecting canadian English
/French language rating system.
52
Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Reference
External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and
control the Monitor’s functions externally.
- Connect the serial port of the control device to the RS-232C jack on the TV back panel.
- RS-232C connection cables are not supplied with the TV.
RS-232C Setup
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
REMOTE
CONTROL IN
RS-232C IN
(CONTROL & SERVICE)
SERVICE)
PC
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
RS-232C Configurations
3-Wire Configurations
(Not standard)
7-Wire Configurations
(Serial female-female NULL modem cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
53
Reference
Set ID
- Use this function to specify a TV ID number.
- Refer to ‘Real Data Mapping’. See page 55.
EZ Scan
Manual Scan
1. Press the MENU button and then use
SETUP menu.
2. Press the G button and then use
D /E
D /E
button to select the
Channel Edit
DTV Signal
button to select Set ID.
Input Source
Input Label
3. Press the G button and then use D / E button to adjust Set ID to
choose the desired TV ID number. The adjustment range of Set ID
is 1 ~ 99.
Set ID
4. Press EXIT button to return to TV viewing or press MENU button to
return to the previous menu.
Communication Parameters
•
•
•
•
•
Baud rate : 9600 bps (UART)
Data length : 8 bits
Parity : None
Stop bit : 1 bit
Communication code : ASCII code
Transmission / Receiving Protocol
Transmission
* Use a crossed (reverse) cable.
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Command Reference List
COMMAND 1 COMMAND 2
DATA
(Hexadecimal)
01. Power
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
08. Brightness
09. Color
10. Tint
11. Sharpness
12. OSD Select
13. Remote Control Lock Mode
14. Treble
15. Bass
16. Balance
17. Color Temperature
18. ISM Method
19. Low Power
0~1
* (Refer to p.55)
* (Refer to p.55)
0~1
0~1
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0~1
0~1
0 ~ 64
0 ~ 64
0 ~ 64
0~3
* (Refer to p.57)
0~1
* [Command 1]: First command to control the set.(j,k,m or x)
* [Command 2]: Second command to control the set.
* [Set ID]: You can adjust the set ID to choose desired monitor
ID number in Setup menu. Adjustment range is 1
~ 99. When selecting Set ID ‘0’, every connected
the TV is controlled. Set ID is indicated as decimal
(1~99) on menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
* [DATA]: To transmit command data.
Transmit ‘FF’ data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0x0D’
* [ ]: ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from non-viable
functions or communication errors.
Data 1: Illegal Code
2: Not supported function
3: Wait more time
COMMAND 1
20. Channel Tuning
21. Channel Add/Del
22. Key
23. Input Select
54
COMMAND 2
DATA 0
DATA 1
(Hexadecimal)
(Hexadecimal)
physical/program high
major/program low
00 ~ 01
key code
*(Refer to p.58)
DATA 2
DATA 3
DATA 4
(Hexadecimal) (Hexadecimal) (Hexadecimal)
major low
minor high
minor low
DATA 5
(Hexadecimal)
attribute
Reference
01. Power (Command2:a)
05. Volume Mute (Command2:e)
G To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
G To control Power On/Off of the TV.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
1 : Power On
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on)
1 : Volume mute on (Volume off)
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Acknowledgement
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback
presents status about each function.
[e][ ][Set ID][ ][OK][Data][x]
06. Volume Control (Command2:f)
02. Input Select (Command2:b) (Main Picture Input)
G To select input source for the TV.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0: DTV
1: Analog
2: AV1
3: AV2
4: Component 1
5:
7:
8:
9:
Component 2
RGB-PC
HDMI1/DVI
HDMI2
G To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command2:g)
G To adjust screen contrast.
You can also adjust contrast in the Video menu.
[b][ ][Set ID][ ][OK][Data][x]
Acknowledgement
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
03. Aspect Ratio (Command2:c) (Main picture format)
G To adjust the screen format.
You can also adjust the screen format using the RATIO
button on remote control or in the Option menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Date 1: 4:3
2: 16:9
3: Horizon
4: Zoom 1
5: Zoom 2
6: Set by program
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command2:h)
G To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
04. Screen Mute (Command2:d)
G To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
* Tint : R50 ~ G50
* Balance : L50 ~ R50
55
Reference
09. Color (Command2:i)
13. Remote Control Lock Mode (Command2:m)
G To adjust the screen color.
You can also adjust color in the Video menu.
G To lock the remote control and the front panel controls on
the set.
Transmission
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
[k][m][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
• Refer to ‘Real data mapping’. See page 55.
Acknowledgement
Data 0: Lock off
1: Lock on
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
[i][ ][Set ID][ ][OK][Data][x]
14. Treble (Command2:r)
10. Tint (Command2:j)
G To adjust treble.
You can also adjust treble in the Audio menu.
G To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
• Refer to ‘Real data mapping’. See page 55.
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 55.
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[ j ][ ][Set ID][ ][OK][Data][x]
15. Bass (Command2:s)
G To adjust bass.
You can also adjust bass in the Audio menu.
Transmission
11. Sharpness (Command2:k)
[k][s][ ][Set ID][ ][Data][Cr]
G To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 55.
Acknowledgement
[k][k][ ][Set ID][ ][Data][Cr]
[s][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 55.
Acknowledgement
16. Balance (Command2:t)
G To adjust balance.
You can also adjust balance in the Audio menu.
[k][ ][Set ID][ ][OK][Data][x]
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
12. OSD Select (Command2:l)
G To select OSD (On Screen Display) on/off.
Data Min: 0 ~ Max: 64
• Refer to ‘Real data mapping’. See page 55.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
1: OSD on
17. Color Temperature (Command2:u)
G To adjust color temperature.
You can also adjust color temperature in the Video
menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium
1: Cool 2: Warm 3: User
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
56
Reference
These functions are available in
42PC3DU/42PC3DVU/50PC3DU/ 60PC1D
model only.
18. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[ j ][p][ ][Set ID][ ][Data][Cr]
Data 1: Inversion
2: Orbiter
4: White Wash
8: Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
20. Tune Command (Command: m a)
G To tune channel to following physical/major/minor number
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Data 0: Physical Channel Number(Transmit by Hexadecimal code)
NTSC air:02~45
NTSC cable: 01~87
ATSC air:02~45
ATSC cable:01~87
Data 1,Data 2: Major Channel Number(two part) or Channel Number(One part)
Data1: High byte
Data2: Low byte
Two part channel number: Major number-Minor number
One part channel number: If the channel band is ATSC digital cable,
it can be used. In case of using one part channel number, minor
channel does not need.
Data 3, Data 4: Minor Channel Number Data3: High byte Data4: Low byte
Data 5:
19. Low Power (Command2:q)
Main
Picture
G To control the Low Power function on/off.
You can also adjust Low Power in Option menu.
Main
Two/One
Part
Channel
Two
One
1 No Use
[ j ][q][ ][Set ID][ ][Data][Cr]
[q][ ][Set ID][ ][OK][Data][x]
Use
Transmission
Data 0: Low Power off
1: Low Power on
Acknowledgement
Using
5 Physical Reserv
Channel
ed
Step
1 NTSC Cable
ATSC Air
ATSC
Cable_std
ATSC
Cable_hrc
ATSC
Cable_irc
ATSC
cable_auto
NTSC Air
...
Reserved
Reserved
* All data are transmitted by Hexadecimal code
*Two/One part Channel: 6th bit
This bit is used in a cable-ready system.
*Using physical channel: 5th bit
If the channel band is NTSC air or NTSC cable, channel tuning
can be done by only physical channel. In this case, using physical channel bit must be low(0).
But if the channel band is ATSC air or ATSC cable, there are two
cases that physical channel enable or disable.
If the physical channel sending is meaningful, you should set
this bit low(0). If the physical channel sending is
meaningless, you should set this bit high(1).
Example)
1. Analog channel: NTSC cable, channel number(35), main picture Command: ma 00 23 xx xx xx xx 01attribute(0x01): main
picture, two part(it’s not mandatory), using physical channel,
NTSC cable ‘xx’ data: don’t care major and minor channel
number in case analog channel tuning.
2. Digital channel: ATSC air, channel number(don’t know physical channel, major(30), minor(3)), main picture
Command: ma 00 xx 00 1E 00 03 22 attribute(0x22): main
picture, two part, not using physical channel, ATSC air ‘xx’
data: don’t care analog channel number in case digital channel tuning.
3. Digital channel: ATSC air, channel number (physical(20),
major (30), minor (5)), main picture
Command: ma 00 14 00 1E 00 05 02 attribute(0x02): main
picture, two part, using physical channel, ATSC air.
Acknowledgement
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][Data5][x]
[a][ ][Set ID][ ][NG][Data0][x]
57
Reference
21. Channel Add/Del (Command: m b)
G To add and delete the channels
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete
1: Channel Add
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][NG][Data][x]
22. Key (Command: m c)
G To send IR remote key code
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code: Refer to page 60.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
23. Input select(Command: x b) (Main Picture Input)
G To select input source for TV.
Transmission
[x][b][][Set ID][][Data][Cr]
Data Structure
DATA(Hex)
INPUT
00
DTV (Antenna)
01
DTV (Cable)
10
Analog (Antenna)
11
Analog (Cable)
20
AV1
21
AV2
40
Component 1
41
Component 2
60
RGB PC
90
HDMI1/DVI
91
HDMI2
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
58
Reference
IR Codes
How to Connect
G Connect your wired remote control to the Remote Control port on the TV.
Remote Control IR Codes
G Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
TC
Carrier frequency
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
G Configuration of frame
• 1st frame
Lead
code
Low
custom code
High
custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
• Repeat frame
Repeat code
Tf
G Lead code
9 ms
4.5 ms
0.55 ms
G Repeat code
9 ms
2.25 ms
G Bit description
• Bit “0”
• Bit “1”
0.56 ms
0.56 ms
1.12 ms
2.24 ms
G Frame interval : Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
59
Reference
Code (Hexa)
0B
0F
98
08
C4
C5
79
0E
10 ~ 19
4C
1A
09
02
03
00
01
1E
AA
39
40
41
07
06
44
43
52
4D
5B
0A
CB
D6
5A
D0
BF
D4
D5
CE
CC
76
77
AF
60
Function
INPUT
TV INPUT
MULTIMEDIA
POWER
POWER ON
POWER OFF
RATIO
TIMER
Number Key 0~ 9
- (Dash)
FLASHBK
MUTE
VOL D
VOLE
CH D
CH E
FAV
INFO
CC
ENTER
MENU
EZ SOUND
EZ PIC
EXIT
SAP
ADJUST
TV
AV1
AV2
COMPONENT 1
COMPONENT 2
RGB-PC
HDMI1/DVI
HDMI2
Ratio 4:3
Ratio 16:9
Ratio Zoom
Note
R/C Button
R/C Button
R/C Button
R/C Button (Power On/Off)
Discrete IR Code (Only Power On)
Discrete IR Code (Only Power Off)
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
Discrete IR Code (TV Input Selection)
Discrete IR Code (AV1 Input Selection)
Discrete IR Code (AV2 Input Selection)
Discrete IR Code (Component1 Input Selection)
Discrete IR Code (Component2 Input Selection)
Discrete IR Code (RGB-PC Input Selection)
Discrete IR Code (HDMI-DVI Input Selection)
Discrete IR Code (HDMI2 Input Selection)
Discrete IR Code (Only 4:3 Mode)
Discrete IR Code (Only 16:9 Mode)
Discrete IR Code (Only Zoom1 Mode)
Reference
Programming the Remote
G The remote control is a multi-brand or universal remote control. It can be programmed to operate most
remote-controllable devices of other manufacturers.
Note that the remote control may not control all models of other brands.
Programming a code into a remote mode
Test your remote control.
To find out whether your remote control can operate the component
without programming, turn on the component such as a VCR and press
the corresponding MODE button (VCR) on the remote control, while
illuminating on the selected component. Test the POWER button to see
if the component responds properly. If not, the remote requires programming to operate the device.
Turn on the component to be programmed, then press the corresponding MODE button on the remote control.
Press the MENU and MUTE buttons simultaneously for 2 seconds, the
button selected component lights on the remote control. If you don't
press any button for 20 seconds, the button selected component will turn
off on the remote control. At a moment, you have to repeat from step 2.
Enter a code number using the number buttons on the remote. When
pressing the button, the light is blinked at a time. Programming code
numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off.
Press the MENU button to store the code. After blinking twice, this code
is stored.
Test the remote control functions to see if the component responds
properly. If not, repeat from step 2.
INPUT
TV INPUT
POWER
DVD
TV
VCR
MODE
CABLE
AUDIO
T-
BRIGH
MENU
STB
BRIGH
ENTER
EXIT
VOL
TIMER
RATIO
MUTE
FAV
INFO
CH
FLASHBK
EZ PIC EZ SOUND
SAP
CC
ADJUST
61
Reference
Programming Codes
VCRs
Brand
Codes
Brand
Codes
Brand
Codes
Brand
Codes
AIWA
AKAI
034
016
125
072
031
012
035
028
108
003
031
005
065
112
108
012
034
059
006
029
036
129
003
034
031
107
132
012
004
043
031
031
012
040
043
012
048
130
KENWOOD
014
047
001
101
034
003
017
040
031
067
012
069
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
013
063
031
031
067
101
013
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
108
072
011
033
013
040
107
145
003
031
053
058
148
014
032
105
113
125
022
003
102
017
131
003
013
031
101
031
024
003
056
077
034
013
031
067
034
010
TATUNG
TEAC
TECHNICS
TEKNIKA
039
034
031
019
101
034
006
008
059
040
040
012
048
012
040
003
031
053
012
034
058
AMPRO
ANAM
AUDIO DYNAMICS
BROKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GE
GO VIDEO
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNY
JENSEN
JVC
043 046 124
146
033
023
037
031
103
039 043
129
033
040
033
007
108
116
135
041
010 064
110 111
117 119
023 039 043
053
027
035
101
153
010
LG (GOLDSTAR)
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
MATSUI
MEI
MEMOREX
MGA
MINOLTA
MITSUBISHI
017
031
037
131
008
025
034
046
138
009
033
109
136
045
018
063
033
033
013
066
063 072
144 147
MTC
MULTITECH
NEC
026 034
137 150
NORDMENDE
OPTONICA
PANASONIC
PENTAX
015 033
101
031 033 043
050 055 060
150 152
PHILCO
PHILIPS
PILOT
PIONEER
034 039 043
048
012 013 020
106 114 123
009 013 014
034 101 106
033 034 041
068
031 033 067
030
033
010
034
102
046
020
020
051
REALISTIC
RICO
RUNCO
SALORA
SAMSUNG
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
101
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
Cable Box
Brand
Codes
Brand
Codes
ABC
003
046
112
014
005
026
092
007
007
065
080
019
023
020
057
032
072
008
052
GOLDEN CHANNEL
HAMLIN
HITACHI
HOSPITALITY
JERROLD
030
049
052
070
002
009
074
001
037
033
010
100
028
015
073
016
044
100
006
AJIN
ANTRONIK
ARCHER
CABLE STAR
CENTURION
CENTURY
CITIZEN
COLOUR VOICE
COMBANO
COMTRONICS
DIAMOND
EAGLE
EASTERN
ELECTRICORD
GE
GEMINI
GI
62
004 039 042
052 053
007 014 024
090
081
030
030 040
062 066
022 025 054
074
LG (GOLDSTAR)
M-NET
MACOM
MAGNAVOX
MEMOREX
MOVIE TIME
NSC
OAK
PANASONIC
PARAGON
PHILIPS
Brand
050 055
055
077
003 004 008
010 052 069
PIONEER
106 101 005
PULSAR
RCA
REGAL
REGENCY
REMBRANT
SAMSUNG
012 064 079
032
028 038 071
031 037 053
047
012 013 020
POST NEWS WEEK
PRUCER
PTS
SCIENTIFIC ATLANTA
SHERITECH
SIGNAL
SIGNATURE
SL MARX
Codes
Brand
Codes
065
034
076
016
059
011
073
100
047
049
057
025
102
003
043
022
030
052
030
SPRUCER
STARCOM
STARGATE
TADIRAN
TAEKWANG
TAIHAN
TANDY
TEXSCAN
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
047
002
008
030
110
105
017
029
039
100
007
004
005
026
012
087
100
085 090
051 052 063
048 071 072
074
050
107 030 068
011 041 042
045 046
VIEWSTAR
ZENITH
078
004 008 009
030
040 056
014
053
007
027
015
088
114
024
014
032
018
089
060
024
035
086
093
Reference
Digital Cable/Satellite Box
Brand
Codes
Brand
ALPHASTAR DSR
AMPLICA
BIRDVIEW
CHANNEL MASTER
123
050
051
013
036
008
054
050
005
011
141
024
038
093
097
122
089
114
017
133
GENERAL INSTRUMENT 003
031
HITACHI
139
HOUSTON TRACKER
033
057
HUGHES
068
JANIEL
060
JERROLD
061
KATHREIN
108
LEGEND
057
LG
001
LUTRON
132
LUXOR
062
MACOM
010
065
MEMOREX
057
NEXTWAVE
028
NORSAT
069
CHAPARRAL
CITOH
CURTIS MATHES
DRAKE
DX ANTENNA
ECHOSTAR
ELECTRO HOME
EUROPLUS
FUJITSU
126 129
014 015 018
055
009 012 077
145
006 007 010
052 112 116
046
040
094
098
056
057
095
099
076
058
096
100
021 022 027
Codes
Brand
134
004 016 029
059 101
140
037 039 051
104
147
144
059 063 064
124 125
070
Codes
143
PANASONIC
060
PANSAT
121
PERSONAL CABLE 117
PHILIPS
071
PICO
105
PRESIDENT
019
PRIMESTAR
030
PROSAT
072
RCA
066
REALISTIC
043
SAMSUNG
123
SATELLITE SERVICE CO 028
085
SCIENTIFIC ATLANTA
032
SONY
103
STARCAST
041
SUPER GUIDE
020
TEECOM
023
Brand
PACE SKY SATELLITE
142
TOSHIBA
UNIDEN
102
110 111
UNIDEN
VIEWSTAR
WINEGARD
ZENITH
106
074
Codes
088
137
002
016
044
078
101
135
115
128
081
091
090 107 130
127
025 042 043
045 048 049
079 080 086
136
146
082 083 084
120
035 047 057
138
124 125
026 075 087
Audio
Brand
AIWA
Codes
014
125
230
AKAI
163
ANAM
003
059
217
BURMECTER
252
CARVER
086
CLARION
199
DAEWOO
027
102
DENON
015
FANTASIA
071
FINEARTS
022
FISHER
089
LG(GOLDSTAR)
001
087
190
211
HAITAI
034
HARMAN/KARDON 068
INKEL
037
078
122
152
157
189
225
247
028 070 096
129 139 229
014 017 023
106 189 216
235 236
Brand
Codes
JVC
KEC
KENWOOD
004
185
038
170
215
030
045
014
100
175
179
201
214
238
103
111
002
034
097
049
104
107
046
013
048
133
158
007
142
104
KOHEL
NAD
LOTTE
053 060 084
148 198 221
075 130 143
099
021
107
191
212
035
024
108
192
239
188
029
110
210
058
079
149
153
158
207
226
062
095
150
154
159
222
227
069
121
151
155
160
224
243
222
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
NAD
ONKYO
OPTIMUS
PANASONIC
PENNEY
013
186
050
171
222
046
016
172
176
180
202
219
240
141
187
067 089
197 206
036
173
177
181
208
223
098
174
178
183
213
232
018 020 025
041 081 090
112
Brand
Codes
PHILIPS
PIONEER
026
039
065
115
113
080
092
103
124
193
204
011
019
106
031
072
156
206
005
044
118
012
076
162
166
205
010
185
101
147
QUASAR
RCA
RCX
REALISTIC
SAMSUNG
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SONY
TAEKWANG
040 041 047
056 057 132
140
TEAC
033 064 113
220 241 251
TECHNICS
112
042
091
123
106
145
194
244
135
083
186
032
082
184
209
006
045
126
020
077
163
167
231
085
187
113
218
143
043 063
093 094
127 250
146
195
245
138
234
Brand
Codes
TOSHIBA
THE
VICTOR
WARDS
YAMAHA
137
061
088 131
089
054 055 066 092
199
182
203
246
144
051 052
117 119
199 200
158
109
248
073
105
164
168
233
106
237
128
114
249
074
161
165
169
242
136
134
DVD
Brand
Codes
Brand
Codes
Brand
Codes
Brand
Codes
APEX DIGITAL
DENON
GE
HARMAN KARDON
JVC
LG
022
020 014
005 006
027
012
001 010 016 025
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
ONKYO
PANASONIC
013
024
002
023
008 017
003 009
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
SAMSUNG
013
004
021
005
005
011
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
007
005
019
009
010
026
006
006
015
006
008
018
016 025
63
Reference
Troubleshooting Checklist
The operation does not work normally.
The remote control
doesn’t work
• Check to see if there is any object between the product and the remote
control causing obstruction.
• Are batteries installed with correct polarity (+ to +, - to -)?
• Correct remote operating mode set: TV, VCR etc.?
• Install new batteries.
Power is suddenly
turned off
• Is the sleep timer set?
• Check the power control settings. Power interrupted
• No broadcast on station tuned with Auto off activated.
The video function does not work.
No picture &
No sound
• Check whether the product is turned on.
• Try another channel. The problem may be with the broadcast.
• Is the power cord inserted into wall power outlet?
• Check your antenna direction and/or location.
• Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
Picture appears
slowly after
switching on
• This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after five
minutes.
No or poor color
or poor picture
• Adjust Color in menu option.
• Keep a sufficient distance between the product and the VCR.
• Try another channel. The problem may be with the broadcast.
• Are the video cables installed properly?
• Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking
• Check for local interference such as an electrical appliance or power tool.
Poor reception on
some channels
Lines or streaks
in pictures
64
• Station or cable product experiencing problems, tune to another station.
• Station signal is weak, reorient antenna to receive weaker station.
• Check for sources of possible interference.
• Check antenna (Change the direction of the antenna).
Reference
The audio function does not work.
Picture OK &
No sound
No output from one
of the speakers
Unusual sound
from inside the
product
• Press the VOL or VOLUME button.
• Sound muted? Press MUTE button.
• Try another channel. The problem may be with the broadcast.
• Are the audio cables installed properly?
• Adjust Balance in menu option.
• A change in ambient humidity or temperature may result in an unusual
noise when the product is turned on or off and does not indicate a fault with
the product.
There is a problem in PC mode.
(Only PC mode applied)
The signal is out of
range.
• Adjust resolution, horizontal frequency, or vertical frequency.
• Check it whether the signal cable is connected or loose.
• Check the input source.
Vertical bar or
stripe on background &
Horizontal Noise &
Incorrect position
• Work the Auto configure or adjust clock, phase, or H/V position. (Option)
Screen color is
unstable or single
color
• Check the signal cable.
• Reinstall the PC video card.
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe
the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please do not use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to
unplug the power cord to protect against possible damage from lightning or power surges.
65
Reference
Product Specifications
Dimensions
with stand
(Width x Height x Depth)
60PC1D
60.8 x 40.8 x 16.0 inches
1544.0 x 1035.5 x 408.2 mm
without stand
(60PC1D-UE)
60.8 x 38.4 x 4.7 inches
1544.0 x 977.0 x 119.2 mm
Weight
Dimensions
with stand
without stand
137.3 pounds / 62.26 kg
with stand
44.4 x 29.5x 15.0 inches
(Width x Height x Depth)
42PC3DU
163 pounds / 74.0 kg
1129.0 x 748.5 x 380.0 mm
without stand
(42PC3DU-UE)
44.4 x 27.4 x 4.1 inches
1129.0 x 695 x 103.7 mm
Weight
Dimensions
with stand
64.4 pounds / 29.2 kg
without stand
55.8 pounds / 25.3 kg
with stand
(Width x Height x Depth)
without stand
42PC3DVU
44.4 x 29.5x 15.0 inches
1129.0 x 748.5 x 380.0 mm
(42PC3DVU-UE)
44.4 x 27.4 x 4.1 inches
1129.0 x 695 x 103.7 mm
Weight
Dimensions
with stand
62.6 pounds / 28.4 kg
without stand
54.0 pounds / 24.5 kg
with stand
(Width x Height x Depth)
50PC3DU
1302.6 x 872.0 x 355.8 mm
without stand
(50PC3DU-UE)
51.3 x 34.3 x 14.0 inches
51.3 x 31.9 x 4.2 inches
1302.6 x 810.0 x 107.7 mm
Weight
with stand
114.4 pounds / 51.9 kg
without stand
95.0 pounds / 43.1 kg
Power requirement
AC100-240V ~ 50/60Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
Program Coverage
VHF 2 ~ 13, UHF 14 ~ 69,
CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69
75 Ω
External Antenna Impedance
Operating Temperature
Environmental
condition
Operating Humidity
Storage Temperature
Storage Humidity
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
s• The specifications shown above may be changed without prior notice for quality improvement.
66
Reference
Dimensions
with stand
31.9 x 24.8 x 9.3 inches
without stand
31.9 x 22.3 x 4.9 inches
811 x 630 x 235 mm
(Width x Height x Depth)
32LC2DU
(32LC2DU-UE)
811.0 x 566.8 x 123.5 mm
Weight
with stand
without stand
Dimensions
with stand
(Width x Height x Depth)
40.8 pounds / 18.5 kg
37.2 x 28.7 x 11.3 inches
944 x 729 x 286 mm
without stand
37LC2DU
48.3 pounds / 21.9 kg
(37LC2DU-UE)
37.2 x26.0 x 5.1 inches
944.0 x 659.3 x 129.7 mm
Weight
Dimensions
with stand
65.0 pounds / 29.5 kg
without stand
54.9 pounds / 24.9 kg
with stand
(Width x Height x Depth)
1054 x 813 x 302 mm
without stand
42LC2DU
41.5 x 32.0 x 11.9 inches
41.5 x 29.4x 5.4 inches
1054.0 x 746.0 x 136.8 mm
(42LC2DU-UE)
Weight
with stand
81.6 pounds / 37.0 kg
without stand
67.0 pounds / 30.4 kg
Power requirement
AC100-240V ~ 50/60Hz
Television System
NTSC-M, ATSC, 64 & 256 QAM
VHF 2 ~ 13, UHF 14 ~ 69,
Program Coverage
CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69
75 Ω
External Antenna Impedance
Operating Temperature
Environmental
condition
Operating Humidity
Storage Temperature
Storage Humidity
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
• The specifications shown above may be changed without prior notice for quality improvement.
67
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 37
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f666e2cb-962a-4ef0-8594-ec75c62bd3d6
Modify Date                     : 2006:07:29 11:50:33+09:00
Create Date                     : 2006:07:29 10:28:49+09:00
Metadata Date                   : 2006:07:29 11:50:33+09:00
Document ID                     : uuid:937ebf8d-03fa-4977-b0e0-454d139511c4
Format                          : application/pdf
Title                           : 38289U0527F(LG) -PDP
Creator                         : QuarkXPressª3.3E: LaserWriter 8 Z1-8.7.1
Author                          : PSY
Producer                        : Acrobat Distiller 4.0 for Macintosh
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BEJ50PC3DUUE

Navigation menu