NCR RSD Atlanta 7710GA2 Electronic Pricing Transmitter User Manual Chapter 10

Download:
Mirror Download [FCC.gov]
Document ID	47905
Application ID	BlybQxAd1JNvB93b2sEg3A==
Document Description	Chapter 10
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.99kB (49881 bits)
Date Submitted	1999-07-14 00:00:00
Date Available	1999-09-22 00:00:00
Creation Date	2001-06-11 10:34:39
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-11 10:34:41
Document Title	Chapter 10

10
SmarTalker and Rail Installation
SmarTalkers
There are two types of SmarTalkers; the 8-character standard tag and
the 8-character small tag as shown in the following illustration.
8-Character Standard
8-Character Small
SmarTalker
SmarTalker
14087
This section provides information about:
•
Attaching the rails and/or clips
•
Attaching the SmarTalker tags
Attaching the Rail
Key Points
When installing a shelf rail, keep in mind that the angle the
SmarTalker will be viewed at is very important. Your completed
installation should provide the best combination of visibility and lack
of glare.
The following table provides optimum viewing angles for SmarTalker
tags. The angles are based an average person’s eye height of 1.59 m
(62.6 in.) and average shelf-viewing distance of .91 m (36 in.).
10-2
SmarTalker and Rail Installation
Shelf Height (in.)
Optimum Angle Up (+) or Down (-) from Vertical
6.0
+57.0
12.0
+54.2
18.0
+51.0
24.0
+47.2
30.0
+42.7
36.0
+37.3
42.0
+30.9
48.0
+23.4
54.0
+14.8
60.0
+5.4
66.0
-4.2
72.0
-13.3
78.0
-21.5
84.0
-28.6
Tools for Each Installer
Tape Measure, minimum length 25 ft.
Large, wide-blade flat-head screwdriver with
round (not square shank)
EPL Puller (removal tool) for SmarTalker tags,
NCR Kit # 7710-K298-V001 (5 per kit)
16 oz. Metal carpenter’s claw hammer (for
hammering shelf rail pins) or fencing tool (an
integrated hammer with nail pulling pliers)
Nail pulling pliers or “nippers” (for shelf pin
removal)
Cloth or leather tool pouch with multiple
pockets (for holding small shelf rail parts)
Knee Pads
1 pair
SmarTalker and Rail Installation
Site Installation Tools
Band saw* or Hacksaw (not a wood saw)
Miter Box (for use with hacksaw)
Utility Knife (for cleaning cut ends of shelf
rails)
Tools Per Store (for On-Going Maintenance)
Band saw* or Hacksaw (not a wood saw)
Miter Box (for use with hacksaw)
Utility Knife
Large, wide-blade flat-head screwdriver with
round (not square) shank
EPL Puller (removal tool) for SmarTalker tags,
NCR Kit # 7710-K298-V001 (5 per kit)
16 oz. Metal carpenter’s claw hammer
2 kits
* A band saw is easier to use, but a hacksaw can be used instead.
10-3
10-4
SmarTalker and Rail Installation
Attaching SmarTalkers to C-channels
A SmarTalker can be installed into a rail that is installed into a shelf’s
C-channel. The rail may be either a fixed-angle rail or an adjustableangle rail.
To install a rail into a shelf’s C-channel, insert the bottom lip of the rail
into the C-channel and press the top lip into the top of the C-channel.
Flexing the mounting portion of the rail may help. Also, a tool may be
available from the rail manufacturer to help with this.
In the following illustration, an adjustable rail is installed into a shelf’s
C-channel. After installation, the angle of the rail is adjusted for the
best combination of visibility and lack of glare.
Top
Shelf
Middle
Shelf
Bottom
Shelf
16058
For more information, refer to the rail manufacturer’s instructions.
SmarTalker and Rail Installation
10-5
Attaching SmarTalkers to Angled Rails
The rails in the following illustration have fixed angles and can be
easily screwed to the top of a shelf. This method of attachment
provides a rigid and durable installation.
After installing the angled rail, install the SmarTalker by opening the
front cover flap, placing the bottom of the tag into the bottom of the
rail and pressing the top of the tag into the rail until it snaps into place.
Top
Shelf
Middle
Shelf
Bottom
Shelf
16059
For more information, refer to the rail manufacturer’s instructions.
Attaching SmarTalkers to Individual Clips
A SmarTalker can be installed into an individual clip that is installed
into a shelf’s C-channel. The clip may be either a fixed-angle clip or an
adjustable-angle clip.
In the following illustration, an adjustable clip is installed into a shelf’s
C-channel. After installation, the angle of the clip is adjusted for the
best combination of visibility and lack of glare.
Top
Shelf
Middle
Shelf
Bottom
Shelf
16060
For more information, refer to the clip manufacturer’s instructions.
10-6
SmarTalker and Rail Installation
Installing and Removing a SmarTalker
To install a SmarTalker, insert the bottom edge of the SmarTalker into
the rail and then push the top of the SmarTalker into the rail.
To remove a SmarTalker, a SmarTalker EPL Removal Tool (or EPL
Puller) is required. The following illustration shows how the EPL
Removal Tool is used.
1. Insert the EPL Removal Tool and push it against the rail.
2. Unhook the pawls of the SmarTalker by lifting the tool as shown
and pulling the SmarTalker out.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:06:11 10:34:39
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:06:11 10:34:41-04:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools