R tron SNIDEN25 iDen Mini Wireless Repeater User Manual

Download:
Mirror Download [FCC.gov]
Document ID	788600
Application ID	pHz6i2fNPD+aPjkYWGS/YQ==
Document Description	Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	295.18kB (3689709 bits)
Date Submitted	2007-05-04 00:00:00
Date Available	2007-05-07 00:00:00
Creation Date	2007-05-02 21:01:42
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-05-02 21:02:59
Document Title	untitled

iDEN MINI
2.2.6. HPA (High Power Amplifier)
The High Power Amplifiers (HPAs) amplifies the transmitted signal from a
base station at the final stage of the repeater and vice versa.
Figure 10.
User’s Manual
HPA(High Power Amplifier)
-17-
iDEN MINI
3. Hardware Installation
The installation procedure is as follows:
„
Check List of Items
„
Mounting
„
Grounding
„
RF Connection
„
Power up
3.1 Check List of Items
Index
Items
iDEN MINI
Power Cord
Screws for Mounting
Q’ty
Items
Figure 11.
User’s Manual
Items
-18-
iDEN MINI
3.2 Mounting
iDEN MINI is easy to mount using the assembled mounting bracket,
which has Ø9 holes for the provided 5/16" fixing screws.
Figure 12.
Mounting
CAUTION
Firmly affix the equipment on the wall of a building and Check necessary.
User’s Manual
-19-
iDEN MINI
3.3 Grounding
WARNING
Dangerously high voltages may occur and damage the equipment if the
equipment is not grounded properly.
A rod on the left side is intended for a building ground. Connect the
ground cable to the rod.
Figure 13.
Grounding
3.4 RF Cable Connection
User’s Manual
a.
Connect a cable from a donor antenna to the DONOR ANTENNA
Port.
b.
Connect a cable from the SERVICE ANTENNA Port to a repeater’s
service antenna.
-20-
iDEN MINI
Figure 14.
Configuration: RF Cable Connection
3.5 Power Up
a.
Connect the power cord.
b.
Plug the power cord into a wall outlet.
c.
Switch on.
d.
Check if the green LED at the bottom turns on.
Figure 15.
User’s Manual
Power Cord Connection
-21-
iDEN MINI
4. Command and Control through the Hyper Terminal
4.1 Setting for Command and Control through the Hyper Terminal
Figure 16.
Local connection to the iDEN MINI
Step 1 Open My Network Places.
Step 2 Push the right button of mouse and select the properties.
User’s Manual
-22-
iDEN MINI
Step 3 Click the properties of TCP/IP.
Step 4 Set the values and OK as the following. Close all windows.
User’s Manual
-23-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:33700df9-61c6-4fe9-8b3a-1e5a219e9fcb
Modify Date                     : 2007:05:02 21:02:59+09:00
Create Date                     : 2007:05:02 21:01:42+09:00
Metadata Date                   : 2007:05:02 21:02:59+09:00
Document ID                     : uuid:1466972e-af65-49b3-b03f-32ff169f317c
Format                          : application/pdf
Title                           : untitled
Producer                        : Acrobat Distiller 6.0 (Windows)

EXIF Metadata provided by EXIF.tools