Samsung Electronics Co SLM3015DW Printer User Manual Part 4

Samsung Electronics Co Ltd Printer Users Manual Part 4

Users Manual Part 4

Clearing paper jams614. Troubleshooting3 Inside the machine • The fuser area is hot. Take care when removing paper from the machine.• Before opening the front cover, close the output support first. 121212
Clearing paper jams624. Troubleshooting4 In the exit area
Clearing paper jams634. Troubleshooting5 In the duplex area
Clearing paper jams644. TroubleshootingIf you do not see the paper in this area, stop and go to next step:12
654. TroubleshootingUnderstanding the LEDThe color of the LED indicates the machine's current status. • Some LEDs may not be available depending on model or country (see "Control panel overview" on page 19).• To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Troubleshooting" on page 195).• You also can resolve the error with the guideline from the computers’ Samsung Printer Status program window (see "Using Samsung Printer Status" on page 187).• If the problem persists, call a service representative.
Understanding the LED664. Troubleshooting6 Status LED Status Description (Status LED)Off • The machine is off-line.• The machine is in power save mode.Green Blinking • When the backlight slowly blinks, the machine is receiving data from the computer.• When the backlight blinks rapidly, the machine is printing data. On • The machine is on-line and can be used.RedBlinking A minor error has occurred and the machine is waiting for the error to be cleared. When the problem is cleared, the machine resumes. On• The cover is opened. Close the cover.• There is no paper in the tray when receiving or printing data. Load paper in the tray.• The machine has stopped due to a major error. Reboot the power and try the printing job again. If the problem persists, please call for service.• An imaging unit has almost reached its estimated cartridge lifea. It is recommended to replace the imaging unit (see "Replacing the imaging unit" on page 52).a. When the imaging unit has reached its end of life, the machine will stop printing. In this case, you can choose to stop or continue printing from the SyncThru™ Web Service (Settings > Machine Settings > System > Setup > Supplies Management > Imaging Unit Stop) or Samsung Easy Printer Manager (Device Settings > System > Supplies Management > Imaging Unit Stop). Turning off this option and continuing to print may damage the device’s system.Orange Blinking Upgrading firmware.On A paper jam has occurred (see "Clearing paper jams" on page 59).
Understanding the LED674. Troubleshooting7 Toner LED/ WPS LED/ Power LED/ Eco LEDStatus Description (Toner LED) OrangeBlinkingSmall amount of toner is left in the cartridge. The estimated cartridge life of toner is close. Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page 49).On A toner cartridge has almost reached its estimated cartridge lifea. It is recommended to replace the toner cartridge (see "Replacing the toner cartridge" on page 50).a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, graphics, media type and media size. Some amount of toner may remain in the cartridge even when orange LED is on and the printer stops printing.Off All toner cartridges are at normal capacity. (WPS LED)bb. Wireless model only (see "Features by model" on page 6).BlueBlinking The machine is connecting to a wireless network.On The machine is connected to a wireless network (see "Wireless network setup" on page 113).Off The machine is disconnected from a wireless network. (Power LED) Blue On The machine is in power save mode.Off The machine is in ready mode or the machine’s power is off. (Eco LED) Green On Eco mode is on (see "Eco printing" on page 41). Off Eco mode is off.
5. AppendixThis chapter provides product specifications and information concerning applicable regulations.•Specifications 69• Regulatory information 79•Copyright 90
695. AppendixSpecifications1 General specifications The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information. Items DescriptionDimension Width x Length x Height 368 x 334.5 x 202 mm (14.49 x 13.17 x 7.95 inches)Weight Machine with consumables 7.0 kg (15.43 lbs)Noise Levela bReady mode Less than 26 dB (A)Print mode Less than 50 dB (A)Temperature Operation 10 to 30°CStorage (packed) -20 to 40°CHumidity Operation 20 to 80% RHStorage (packed) 10 to 90% RHPower ratingc110 volt models AC 110 - 127 V220 volt models AC 220 - 240 V
Specifications705. Appendix Power consumptiondAverage operating mode Less than 400 WReady mode Less than 45 WPower save mode Less than 0.9 WPower off modeeLess than 0.2 W (0.1 Wf)Network Standby Mode (All Port Activation)Less than 1.16 WWireless gModule SPW-B4319Sa. Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing.b. China only: If the equipment's noise is louder than 63 db (A), the equipment should be placed in region of relatively independent advice.c. See the rating label on the machine for the correct voltage (V), frequency (hertz) and type of current (A) for your machine.d. The power consumption may be affected by the machine’s status, setting conditions, operating environment, and measuring equipment and method the country uses.e. Power consumption can be completely avoided only when the power cable is not connected.f. For the machine that has a power switch.g. Wireless model only (see "Features by model" on page 6).Items Description
Specifications715. Appendix2 Print media specifications Type Size DimensionsPrint media weight/CapacityaTray Manual feederbPlain paperLetter 216 x 279 mm (8.5 x 11 inches) 60 to 163 g/m2 (16 to 43 lbs bond) • 250 sheets of 80 g/m2 (21 lbs bond)60 to 220 g/m2 (16 to 59 lbs bond)• 1 sheet of 80 g/m2 (21 lbs bond)Legal 216 x 356 mm (8.5 x 14 inches)US Folio 216 x 330 mm (8.5 x 13 inches)A4 210 x 297 mm (8.27 x 11.69 inches)Oficio 216 x 343 mm (8.5 x 13.5 inches)JIS B5 182 x 257 mm (7.17 x 10.12 inches)ISO B5 176 x 250 mm (6.93 x 9.84 inches) Executive 184 x 267 mm (7.25 x 10.5 inches)A5 148 x 210 mm (5.83 x 8.27 inches)A6 105 x 148 mm (4.13 x 5.83 inches)
Specifications725. AppendixEnvelopeEnvelope Monarch98 x 191 mm (3.87 x 7.5 inches) Not available in tray 60 to 220 g/m2 (16 to 59 lbs bond)Envelope No. 10 105 x 241 mm (4.12 x 9.5 inches)Envelope DL 110 x 220 mm (4.33 x 8.66 inches)Envelope C5 162 x 229 mm (6.38 x 9.02 inches)Envelope C6 114 x 162 mm (4.49 x 6.38 inches)Thick paper Refer to the Plain paper section Refer to the Plain paper section 91 to 105 g/m2 (24 to 28 lbs bond) 91 to 105 g/m2 (24 to 28 lbs bond)Thicker paper Refer to the Plain paper section Refer to the Plain paper section Not available in tray 164 to 220 g/m2 (44 to 59 lbs bond)Thin paper Refer to the Plain paper section Refer to the Plain paper section 60 to 70 g/m2 (16 to 19 lbs bond) 60 to 70 g/m2 (16 to 19 lbs bond)Transparency Letter, A4 Refer to the Plain paper section Not available in tray 138 to 146 g/m2 (37 to 39 lbs bond)LabelscLetter, Legal, US Folio, A4, JIS B5, ISO B5, Executive, A5Refer to the Plain paper section Not available in tray 120 to 150 g/m2 (32 to 40 lbs bond)Type Size DimensionsPrint media weight/CapacityaTray Manual feederb
Specifications735. Appendix Card stockLetter, Legal, US Folio, A4, JIS B5, ISO B5, Executive, A5,Postcard 4x6Refer to the Plain paper section 121 to 163 g/m2 (32 to 43 lbs bond) 121 to 163 g/m2 (32 to 43 lbs bond)Bond paper Refer to the Plain paper section Refer to the Plain paper section 106 to 120 g/m2 (28 to 32 lbs bond) 106 to 120 g/m2 (28 to 32 lbs bond)Minimum size (custom) •Manual feeder: 76 x 127 mm (3 x 5 inches)•Tray: 105 x 148.5 mm (4.13 x 5.85 inches)60 to 163 g/m2 (16 to 43 lbs bond) d, eMaximum size (custom) 216 x 356 mm (8.5 x 14 inches)a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. b. 1 sheet for manual feeder.c. The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness.d. The paper types available in the manual feeder: Plan, Thick, Thicker, Thin, Cotton, Colored, Pre-printed, Recycled, Envelope, Transparency, Labels, Cardstock, Bond, Archivee. The paper types available in tray: Plan, Thick, Thin, Recycled, Cardstock, Bond, ArchiveType Size DimensionsPrint media weight/CapacityaTray Manual feederb
Specifications745. Appendix3 System requirementsMicrosoft® Windows® Operating systemRequirement (recommended)CPU RAM free HDD spaceWindows® XP Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.5 GBWindows Server® 2003 Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.25 GB to 2 GBWindows Server® 2008 Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz) 512 MB (2 GB) 10 GBWindows Vista®Intel® Pentium® IV 3 GHz 512 MB (1 GB) 15 GBWindows® 7 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).•DVD-R/W DriveWindows Server® 2008 R2 Intel® Pentium® IV 1.4 GHz (x64) processors (2 GHz or faster) 512 MB (2 GB) 10 GBWindows® 8Windows® 8.1Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 2 GB 20 GB• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).•DVD-R/W DriveWindows Server® 2012Windows Server® 2012 R2Intel® Pentium® IV 1.4 GHz (x64) processors (2 GHz or faster) 512 MB (2 GB) 32 GB
Specifications755. Appendix • Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.• Users who have administrator rights can install the software.•Windows Terminal Services is compatible with your machine. Mac Operating systemRequirements (Recommended)CPU RAM Free HDD spaceMac OS X 10.5 •Intel® processors• 867 MHz or faster Power PC G4/G5512 MB (1 GB) 1 GBMac OS X 10.6 •Intel® processors 1 GB (2 GB) 1 GBMac OS X 10.7 - 10.9 •Intel® processors 2 GB 4 GB
Specifications765. AppendixLinux Items RequirementsOperating systemRed Hat Enterprise Linux 5, 6Fedora 11, 12, 13, 14, 15, 16, 17, 18, 19openSUSE 11.0, 11.1, 11.2, 11.3, 11.4, 12.1, 12.2, 12.3Ubuntu 10.04, 10.10, 11.04, 11.10, 12.04, 12.10, 13.04SUSE Linux Enterprise Desktop 10, 11Debian 5.0, 6.0, 7.0, 7.1Mint 13, 14 , 15CPU Pentium IV 2.4GHz (Intel Core™2)RAM 512 MB (1 GB)Free HDD space 1 GB (2 GB)
Specifications775. AppendixUnix Items RequirementsOperating systemSun Solaris 9, 10, 11 (x86, SPARC) HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium) IBM AIX 5.1, 5.2, 5.3, 5.4, 6.1 7.1 (PowerPC)Free HDD space Up to 100 MB
Specifications785. Appendix4 Network environment Network and wireless models only (see "Features by model" on page 6). You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the machine. Items SpecificationsNetwork interface • Ethernet 10/100 Base-TX Wired Lan• 802.11b/g/n Wireless LANNetwork operating system•Windows® XP, Windows Server® 2003, Windows Vista®, Windows® 7, Windows® 8, Windows Server® 2008 R2•Various Linux OS• Mac OS X 10.5-10.9•UNIX OSNetwork protocols•TCP/IPv4•DHCP, BOOTP• DNS, WINS, Bonjour, SLP, UPnP• Standard TCP/IP Printing (RAW), LPR, IPP, WSD• SNMPv 1/2/3, HTTP, IPSec• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)Wireless security • Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)• Encryption: WEP64, WEP128, TKIP, AES
795. AppendixRegulatory informationThis machine is designed for a normal work environment and certified with several regulatory statements.5 Laser safety statementThe printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1 : 2007.Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.Warning Never operate or service the printer with the protective cover removed from laser/scanner assembly. The reflected beam, although invisible, can damage your eyes.When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:6 Ozone safetyThis product's ozone emission rate is under 0.1 ppm. Because ozone is heavier than air, keep the product in a place with good ventilation.
Regulatory information805. Appendix7 Power saver8 Recycling9 China onlyWebsite: http://www.samsung.com/cn/support/location/supportServiceLocation.do?page=SERVICE.LOCATIONThis printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR program see http://www.energystar.govFor ENERGY STAR certified models, the ENERGY STAR label will be on your machine. Check if your machine is ENERGY STAR certified.Recycle or dispose of the packaging material for this product in an environmentally responsible manner.襦襦愤縑趀爮闭賉賉帞縑趀绌裎術賉縑聱ポM9śJマ;SUHVV01';SUHVV0':蜷筨愤竖爮襔*%

Navigation menu