Technology Solutions 1084 Optical Finger Sensor Tri-Scan Reader User Manual 1084 Approvals Software
Technology Solutions (UK) Ltd Optical Finger Sensor Tri-Scan Reader 1084 Approvals Software
Contents
- 1. 1084 User's Manual
- 2. 1084 Approvals Software
1084 Approvals Software
1084 Approvals Software Introduction The ter i al is supplied ith t o applicatio s Bio etric Appro als Applicatio a d eVie er . Both applications require the hardware to be attached before the particular application is launched. As the application is launched the hardware is detected and configured for use with the application. One application must be exited before the other application can be run. Launching an Application Both applications are already deployed to the terminal and can be launched from Progra s located in the start menu. Biometric Accessory Application and eViewer are launched by tapping the appropriate icon. hich is Biometric Accessory Approvals Application This application is used to set the accessory into various modes. As the application is launched it detects the presence of the hardware. Once detected the mode buttons are enabled. NOTE: For the accessory to change to some modes an RFID card must be present in the field. A card has been provided for this purpose. It is only required to change the mode. The current mode is displayed on the screen. Any errors are displayed in the list view below the buttons. NOTE: To enter the On, Carrier only state is it best to set the mode to off and then set the mode to On, Carrier only rather than switch directly from the other modes. Tap the appropriate button to set the hardware into the required mode: OFF – Turns of the accessory ON, NO RF – Powers up the accessory and then powers of the contactless card reader ON CARRIER ONLY – Powers up the accessory and sets the RF field into a continuous carrier only mode ON ACTIVE – Powers up the accessory and sets the RF field so that the reader is searching for transponders Use the left soft menu key to exit the application. eViewer This application demonstrates use of the card reader. While a card is in range is UID and other basic details are output to the screen. As the application is launched a splash screen is displayed while the hardware is detected. Once detected it switches to the main screen and starts the RFID reader. While a card is present it is output to the screen. If no card is present for a period longer than an idle timeout (30s) the reader powers off. The read button will restart the process. Exit will exit the application.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Robin Stone Create Date : 2010:03:15 11:23:40Z Modify Date : 2010:05:03 14:13:00-07:00 Has XFA : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Microsoft® Office Word 2007 Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2010:05:03 14:13-07:00 Document ID : uuid:4e1b06a3-68c8-4ed2-a11c-5f9ed2d7826e Instance ID : uuid:e30140c4-dddd-4bcf-803d-b681f80dc8f1 Format : application/pdf Creator : Robin Stone Page Count : 3EXIF Metadata provided by EXIF.tools