VELUX America 835403 Remote control User Manual 453347 2014 02 KLR web GB 2 1 indd

Download:
Mirror Download [FCC.gov]
Document ID	2703795
Application ID	IhCNYRof0AnIY4630BjhTQ==
Document Description	User guide-1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	435.86kB (5448297 bits)
Date Submitted	2015-08-05 00:00:00
Date Available	2015-08-05 00:00:00
Creation Date	2015-03-04 16:30:08
Producing Software	Acrobat Distiller 10.1.1 (Windows)
Document Lastmod	2015-03-04 16:30:25
Document Title	453347-2014-02_KLR_web_GB_2.1.indd
Document Creator	Adobe InDesign CS6 (Windows)

VELUX INTEGRA®
KLR 200
Version: 002.001.xxx.xxx
Congratulations on your new VELUX INTEGRA® product!
Thank you for buying this VELUX INTEGRA® product.
The control pad has been produced and tested in accordance with the newest
methods and strictest requirements and will help you to get the most out of all your
VELUX INTEGRA® products.
DIRECTIONS FOR USE FOR VELUX INTEGRA ® KLR 200. ©2013, 2014 VELUX GROUP
® VELUX, THE VELUX LOGO, INTEGRA, io-homecontrol AND THE io-homecontrol LOGO ARE REGISTERED TRADEMARKS USED UNDER LICENCE BY THE VELUX GROUP
VAS 453347-2014-01
VELUX INTEGRA®
KLR 200
Contents
Important information
Control pad
Control pad functions
Operation
Basic operation
Operation of windows
Operation of sunscreening products
Operation of lights
Operation of products connected to on/off switch
Operation of other types of io-homecontrol® products
Product position
Turn on/Home/Stop all products
Programs
Using programs
VELUX programs
10-14
- Using a program
10-11
- Editing a program
12-13
- Adding a program to the product navigator
14
- Resetting to default settings
14
Own programs
15-22
- Creating a program
15-17
- Editing a program
18-19
- Adding a program to the product navigator
20
- Renaming a program
21
- Silent mode operation
22
- Deleting a program
22
Smart operation
Finding products
23
Keyboard
23
Renaming products
Groups
24
25-28
- Creating a group
25
- Editing a group
26
- Renaming a group
27
- Deleting a group
Rooms
28
29-32
- Creating a room
29
- Editing a room
30
- Renaming a room
31
- Deleting a room
32
VELUX 2
VELUX INTEGRA®
KLR 200
Contents
Favourites
33-34
- Editing order of products in the product navigator
33
- Editing favourites
34
Operation without using the control pad
Manual operation of centre-pivot windows
35
Closing centre-pivot windows in case of power failure or discharged battery
36
Closing windows if the control pad has been mislaid
37
Setting up
Start-up of a new VELUX INTEGRA® system
Initial set-up
38
If the initial set-up fails
39
Extension of your VELUX INTEGRA® system
Adding products to the control pad
40
Adding a control
41-93
- Adding a control to your system already operated with a VELUX INTEGRA® control pad KLR 200
41-53
- Adding a VELUX INTEGRA® control pad KLR 200 to your system already operated with another control
54-68
- Allowing controls already in use in their separate systems to operate each other’s products
69-93
Deleting products in the control pad
94
Joint operation of io-homecontrol® products
95-97
- Sending the security key to another io-homecontrol® control
96
- Receiving the security key of another io-homecontrol ® control
97
®
- Creating a new security key in VELUX INTEGRA control pad KLR 200
97
Settings
Time and date
98-99
Language
100
Silent mode operation of products
100
Resetting the control pad
101
Security
Password
Changing the security key
102
103-113
4 Installation
Fitting the control pad to the wall
114
Repositioning the rain sensor in case of retrofitting
115
Declaration of conformity
116
VELUX 3
VELUX INTEGRA®
KLR 200
Important information
Read instructions carefully before installation. Please keep
instructions for future reference and hand them over to any new
user.
Note: These instructions cover products, product features and
product offerings that may vary with markets and selected language. Consequently, the display illustrations, the display texts
and the available features related to your product may differ
from what is shown in these instructions. Contact your VELUX
sales company for specific information, see telephone list or
www.velux.com.
Safety
• The control pad is intended for operation by persons with the
relative experience and knowledge or persons who have been
given instruction concerning its use by a person responsible
for their safety.
• Children must not be allowed to play with the window and its
electrical products, and the control pad should be kept out of
their reach.
• If repair or adjustment work is needed, disconnect from mains
or battery supply and ensure that it cannot be reconnected
unintentionally.
• Before operating, ensure that the window and its electrical
products can be operated without risk of damage to property
or injury to people or animals.
• For personal safety, never have your hand or body out of the
window without first having switched off the mains or battery supply.
Function
• If the rain sensor gets wet, the window operator automatically closes the window; however, the ventilation flap remains
open.
• Disabling the rain sensor implies acceptance of the risk of rain
water being able to enter the building while the window is
open.
• To prevent the window from closing because of very fine/
weak rain, fog or dew, the rain sensor is equipped with a heating element to keep the surface dry.
• If the window has been opened manually, the window operator will not be activated via the rain sensor or other automatic
functions.
• From fully open, it will take up to one minute from the time of
activation before the window is completely closed. Therefore,
in case of sudden rain, water may enter the room before the
window is closed.
• In case of snow and/or ice, the operation of the window may
be blocked.
• It is recommended to place a control pad in the room where
the window and its electrical products have been installed.
Product
• The control pad has been designed for use with genuine
VELUX products. Connection to other products may cause
damage or malfunction.
• The control pad is, within each market region, compatible
with products with the io-homecontrol® logo.
• Electrical products must be disposed of in conformity with
national regulations for electronic waste and not with household waste.
• Used batteries must not be disposed of together with household waste but have to be disposed of in conformity with the
relevant national environmental regulations. Batteries contain
substances that can be harmful if not handled and recycled
correctly.
•
Use local authority battery disposal point where available.
• The packaging can be disposed of with usual household
waste.
• Sound pressure level: Max 70 dB(A).
• Radio frequency band: 868 MHz within Europe and 2.4 GHz in
most countries outside Europe.
• Radio frequency range: 200 m free field. Depending on building construction, the indoor range is approx 20 m. However,
constructions with reinforced concrete, metal ceilings and
plaster walls with steel members may reduce the range.
• Expected battery lifetime of control pad: Up to 1 year.
• Expected battery lifetime of solar powered window operator:
Approx 10 years.
Maintenance and service
• Disconnect from mains or battery supply before carrying out
any maintenance or service work to the window and products
connected to it and ensure that it cannot be reconnected
unintentionally during this time.
• Maintenance and installation must be carried out in consideration to Health and Safety at work requirements.
• If mains cable is damaged, it must be replaced by qualified
personnel in accordance with national regulations.
• Clean the control pad with a soft dry or damp cloth.
• Dirt on the rain sensor may cause operating problems. Therefore, it is recommended to clean the rain sensor with a soft,
wet cloth once or twice a year or when needed.
• In case of accumulation of dirt, the solar cell should be
cleaned with water and ordinary household cleaners.
• Spare parts are available through your VELUX sales company.
Please provide information from the data label.
• If you have any technical questions, please contact your
VELUX sales company, see telephone list or www.velux.com.
io-homecontrol® provides advanced and secure radio technology that is easy to install.
io-homecontrol® labelled products communicate with each other, improving comfort,
security and energy savings.
www.io-homecontrol.com
VELUX 4
VELUX INTEGRA®
KLR 200
Control pad
Control pad functions
Shows product
location
Running program
Low battery
Product navigator.
Shows operable product or
program
Activates products, for instance closing a window
or running up a blind
Sets the product position,
for instance running a blind
partly down
Pre-set closing
Awning blind control
Roller shutter with upper/lower elements
Opens the ventilation flap of
the window. The window is
still closed
Light gauge
Access to programs and settings
Stops running products.
Shows the position of the
product shown in the display
Activates products, for instance opening a window or
running down a blind
Indicates the product position
from 0-100. A fully opened
window is 100 (100 % open),
and a fully closed blind is 100
(100 % closed)
Tapping the Home button
turns on the display again
after sleep mode and shows
the first product in the product navigator. Touching and
holding it for 3 seconds stops
all products
Battery compartment
Diode
Key button
RESET button
USB stick (type micro-USB B)
Release button for battery
compartment lid
VELUX 5
VELUX INTEGRA®
KLR 200
Operation
Basic operation
You can operate all products by tapping icons/buttons or by dragging the slider and tapping the bar in the display.
The product to be operated is shown in the middle of the product
navigator display. If more products are registered in the control
pad, they are shown as shadows in the display sides. Select the
product you want to operate by swiping a finger over the display
in the directions of the arrows.
Operation of windows
Close
Stop
Open
Open ventilation flap only. The window is still closed.
Drag the slider or tap the bar to open the window to desired
position. The position from 0-100 is shown in the bottom right
corner.
Tap the clock to close the window automatically after a given
period of time.
Choose for how many minutes the window is to be open and tap
"OK".
The icon in the bottom left corner shows for how many minutes
the window will still be open.
Note: If you try to open a window while it is raining, only the
ventilation flap will be opened. This function prevents the rain from
coming in. Tap "OK" to accept.
Alternatively, tap "Open anyway" if you want to open the window
even if it is raining. The window can now be opened up to a maximum of 50 %. After 15 minutes, the window will close automatically if it is still raining.
If you set the automatic closing to less than 15 minutes, the window will close automatically at the end of this time period.
VELUX 6
VELUX INTEGRA®
KLR 200
Operation
Basic operation
Operation of sunscreening products
Roller shutters/Awnings blinds/Blinds
Run up
Stop
Run down
Drag the slider or tap the bar to set the position of the sunscreening product. The position from 0-100 is shown in the
bottom right corner.
Roller shutters with upper/lower elements
Tap
Tap the element you want to operate.
Tap "OK". You can now operate the element as described above.
Venetian blinds
1 Run up
2 Stop
3 Run down
4 Drag the slider or tap the bar to set the position of the Venetian
blind. The position from 0-100 is shown in the bottom right
corner.
5 Tap
to set the tilting of the slats.
6 Tap
to tilt the slats upwards.
7 Stop
8 Tap
to tilt the slats downwards.
9 Drag the slider or tap the bar to set the tilting of the slats.
The tilting from 0-100 is shown in the bottom right corner.
10 Tap
to return to setting the position of the Venetian blind.
10
VELUX 7
VELUX INTEGRA®
KLR 200
Operation
Basic operation
Operation of lights
Turn off
Stop
Turn on
Drag the slider or tap the bar to set the intensity of the light.
The intensity from 0-100 is shown in the bottom right corner.
Operation of products connected to on/off switch
Turn off
Turn on
Operation of other types of io-homecontrol® products
Open
Stop
Close
Note: The example shows a garage door.
Product position
Tap "STOP" and the position of the product can now be seen in
the bottom right hand corner of the product navigator display. For
instance, you can see how far a window is open.
Turn on/Home/Stop all products
To prolong the lifetime of the control pad batteries, the display
goes into sleep mode shortly after the last touch. You turn on the
display again by tapping .
When the display is on, a tap on takes you home to the first
product in the product navigator.
Touching and holding
for at least 3 seconds stops all products.
VELUX 8
VELUX INTEGRA®
KLR 200
Operation
Programs - Using programs
A program can help you get a smarter home. It can ensure that
your house is ventilated regularly, that internal temperatures are
kept down during the day when necessary, and that the heat loss
is reduced at night.
Tap in the top right corner of the display to get access to the
programs.
Under "Programs", you will find the VELUX programs available for
the products registered in your control pad. The more different
products registered, the more VELUX programs available. There
are eight VELUX programs.
Two programs will run only once when activated. You can edit
these programs.
Six programs, when activated, will automatically run repeatedly
according to a set schedule until you stop them. You can edit the
programs. A clock at the bottom right of the program icons indicates that the program will run repeatedly.
Ventilation
Leaving home
Good morning
Sunscreening
Good night
On vacation
Indoor climate
Energy Balance
In addition, you can make your own programs, see the section
Creating a program. Here you can combine the program settings
as you wish.
When choosing a VELUX program, its contents are shown on the
display. Tap to go back.
Tap "Start" to activate a program. Tap "Edit" to change the individual actions/settings of the program to make them match your
wishes.
Tap to go back.
VELUX 9
VELUX INTEGRA®
KLR 200
Operation
Programs - VELUX programs
Using a program
Two examples of how to use VELUX programs are shown.
Example 1
The program "Ventilation" makes it easy to open and close your windows.
The example shows how to use it.
Tap "Programs".
Tap "Ventilation".
Tap "Start".
The display asks if you want to
add the program to the product navigator for easier access.
Tap "No".
Note: Tap "Yes" if you want to
add the program to the product navigator (see page 14).
The clock turns blue when the
program is running.
Tap "Ventilation" to stop the
program.
Tap "Stop".
Tap
Tap
to finish.
VELUX 10
VELUX INTEGRA®
KLR 200
Operation
Programs - VELUX programs
Example 2
The program "Leaving home" ensures that all windows are closed and that all registered locks are operated.
The example shows how to use it.
Tap
Tap "Leaving home".
Your home is now secured until
you tap "Unlock".
Tap "Programs".
Tap "Start".
Note: The display notifies you
if a window has been opened
manually. This window must
be closed manually again to enable you to secure your home.
NOTE!
After starting "Leaving home",
you can still operate products
ordinarily with another control
pad or control.
However, if you try to activate a
program, the display shows
that operation has been
blocked.
VELUX 11
VELUX INTEGRA®
KLR 200
Operation
Programs - VELUX programs
Editing a program
You can change the settings in a program to make it suit you better.
The example shows how to change the settings in the program "Ventilation" into opening just one window and setting its opening position
for ventilation purposes.
Tap "Programs".
Tap "Ventilation".
Tap "Edit".
Tap "Program settings".
Tap "All windows".
Tap "All windows".
Tap
Tap the bar with the blue slider.
10
Remove ticks for the windows
not to be opened 1 .
Note: The individual products
can be identified by tapping
the icon. See also the section
Finding products.
2.
Tap
Drag the slider or tap the bar
to open window to desired
position. The position from
0-100 is shown in the bottom
right corner 1 .
2.
Tap
Continue on the next page
VELUX 12
VELUX INTEGRA®
KLR 200
Operation
Programs - VELUX programs
11
Tap
13
Tap "All windows".
Tap "All windows".
12
14
15
Tap
17
Tap
to finish.
16
Remove ticks for the windows
not to be closed 1 .
Note: The individual products
can be identified by tapping
the icon. See also the section
Finding products.
2.
Tap
Tap
VELUX 13
VELUX INTEGRA®
KLR 200
Operation
Programs - VELUX programs
Adding a program to the product navigator
You can place your program in the product navigator to make it easier to activate.
The example shows how to add the program "Ventilation" to the product navigator.
Tap "Ventilation".
Tap "Start".
The display asks whether you
want to add the program to
the product navigator.
Now the program has been
added to the product navigator
where you can access it easier.
Tap "Yes".
Resetting to default settings
To cancel your settings, you can reset to default settings.
Tap "Ventilation".
Tap "Edit".
Tap "Reset to default settings".
Tap "Yes".
VELUX 14
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
Creating a program
If the VELUX programs do not cover your requirements, you can make your own program. You may for instance need to ventilate a room
at a certain time every day.
The example shows how to make a program with the name "Night cooling".
Tap "Programs".
Tap "My own program".
Tap "Create program".
Tap "Program with a schedule"
if the program is to be repeated
on selected days 1 .
Note: Tap "Program" only if the
program is to run immediately.
2.
Tap
Tap "Add products".
Tap
Tap "Windows"
2.
Tap
Tap "Set position".
10
Scroll down the display and tick
the windows to be included in
the program 1 .
Note: The individual products
can be identified by tapping the
icon. See also the section Finding products.
2.
Tap
Drag the slider or tap the bar to
set the opening of the windows. The position from 0-100
is shown in the bottom right
corner 1 .
2.
Tap
Continue on the next page
VELUX 15
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
Tap "Start step: 00:00".
11
Roll the wheel to set the time to
open the windows 1 .
Tap "OK" 2 .
12
Tap "Repeat: All days".
13
14
Scroll down the display and
remove tick for the days not to
be part of the program 1 .
2.
Tap
15
Tap
17
Tap "Add products".
Tap "Create new program step"
to set the time to close the
windows again.
16
18
Tap "Windows"
2.
Tap
19
21
Scroll down the display and tick
the windows to be part of the
program 1 .
Note: The individual products
can be identified by tapping the
icon. See also the section Finding products.
2.
Tap
20
Tap "Set position".
Drag the slider or tap the bar to
set the opening of the windows
to 0%. The position from 0-100
is shown in the bottom right
corner 1 .
2.
Tap
22
Tap "Start step: 00:00".
Continue on the next page
VELUX 16
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
23
Roll the wheel to set the time to
close the windows 1 .
Tap "OK" 2 .
24
Tap "Repeat: All days".
Scroll down the display and
remove tick for the days not to
be part of the program 1 .
2.
Tap
26
Tap
Tap
28
25
27
29
31
Tap "Start" to activate the
program.
30
Enter a name for the program,
in this case "Night cooling" 1 .
For use of keyboard, see the section Keyboard.
2.
Tap
Tap "OK".
The program "Night cooling" is
now in the program overview.
From this overview you may
start, stop and edit the program
at any time. When you start it,
the clock turns blue.
VELUX 17
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
Editing a program
You can change the settings in a program to make it better suit your requirements.
The example shows how to change the settings so that Window 3 is no longer part of the program "Night cooling".
Tap "Programs".
Tap "Night cooling".
Tap "Edit".
Tap "Program settings".
Tap "All windows".
Tap "All windows".
Tap
Tap
10
Remove tick for the window
not to be opened 1 .
Note: The individual products
can be identified by tapping
the icon. See also the section
Finding products.
2.
Tap
Tap "All windows".
Continue on the next page
VELUX 18
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
11
Tap "All windows".
12
13
Tap
15
Tap
to finish.
14
Remove tick for the window
not to be closed 1 .
Note: The individual products
can be identified by tapping
the icon. See also the section
Finding products.
2.
Tap
Tap
VELUX 19
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
Adding a program to the product navigator
You can place a program in the product navigator to make it easier for you to activate it.
The example shows how to add the program "Night cooling" to the product navigator.
Tap
Tap "Night cooling".
Tick "Show in product navigator".
Tap
to finish.
Tap "Programs".
Tap "Edit".
Now the program has been
added to the product navigator where you can start and
stop it.
VELUX 20
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
Renaming a program
You can rename your own programs.
In the example, the name of the program "Night cooling" is changed into "Night program".
Tap "Night cooling".
Tap "Edit".
Tap "Choose new name".
repeatedly to delete
Tap
the present name. For use
of keyboard, see the section
Keyboard.
Enter a new name for the
program, in this case "Night
program" 1 .
2.
Tap
Tap "OK".
Tap
You can find the program with
the new name in the product
navigator.
to finish.
VELUX 21
VELUX INTEGRA®
KLR 200
Operation
Programs - Own programs
Silent mode operation
Some products have been set to silent mode operation when they are activated by programs running according to a schedule, see also
the section Using programs. This may for instance be convenient if the products are activated automatically at night. Please note that
products run slower when they have been set to silent mode operation. If you opt out of silent mode operation, the products will run
faster.
The example shows how to deselect silent mode operation of products operated via the program "Night cooling".
Tap "Night cooling".
Tap "Edit".
Remove the tick for "Silent
mode operation of products".
Silent mode operation has now
been deselected.
Tap
to finish.
Deleting a program
If you do not want to use one of your own programs anymore, you can delete it.
The example shows how to delete the program "Night cooling".
Tap "Night cooling".
Tap "Edit".
Tap "Delete program".
Tap "Yes".
VELUX 22
VELUX INTEGRA®
KLR 200
Operation
Smart operation
Finding products
It may be difficult to tell the products from each other in the product navigator. If you are in doubt you can identify the product of interest
at Window 3.
by tapping the icon for product, for instance
The example shows how to find Window 3 if for instance you are renaming the window.
Tap
Window 3 will now run briefly
back and forwards so you can
see whether you found the right
one or not.
Tap "Window 3".
You can now continue renaming
the window or finding another
product.
for "Window 3".
Tap "Show".
Keyboard
To change the names created automatically, you can enter new names via the keyboard. The keyboard is only visible when it is possible to
use it.
Keyboard functions:
Switching between lower and
upper case letters and between
figures and special characters.
Switching between letters and
figures.
Deleting the latest entered
character.
The example shows how to use the keyboard, for instance when you
are renaming groups and want to call a group "Group 1".
Enter "Group" 1 .
Tap "123#" to switch to
figures 2 .
Tap the space bar 1 .
Enter "1" 2 .
Tap to continue 3 .
VELUX 23
VELUX INTEGRA®
KLR 200
Operation
Smart operation
Renaming products
You can change the names of products to make it easier to find and operate them.
The example shows how to change the names of Window 4 and Window 5 into Left and Right respectively.
Tap "Name product".
Tap "Window 4" 1 .
Note: The individual products
can be identified by tapping the
icon. See also the section Finding products.
2.
Tap
Scroll down the display to find a
name for the product on the list.
Note: You can also enter a
name of your own by tapping
"Enter name". For use of keyboard, see the section Keyboard.
Tap "OK".
Tap
Select "Left"
2.
Tap
Tap "Window 5"
2.
Tap
10
Select "Right"
2.
Tap
Tap "OK".
Tap
to finish.
11
The windows are now called
"Left" and "Right" in the
product navigator.
VELUX 24
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Groups
Creating a group
If you have several products of the same type, you can operate them simultaneously by grouping them. For instance, you can open
and close all windows facing south or all windows in a room at the tap on a button.
The example shows how to create the group "Group 1" containing Window 2 and Window 3.
Venetian blind 1
Blind 2
Window
Blind 1
Window
Light 3
Light 1
Roller shutter 4 Roller shutter 3
Roller shutter 2 Roller shutter 1
Window
Window
Window
Group
Light 2
Tap
Tap "Create group".
Window
Window
Light 4
Tap "Groups".
Tap "Windows"
2.
Tap
Scroll down the display and tick
the windows to be included in the
group 1 .
Note: The individual products
can be identified by tapping the
icon. See also the section Finding
products.
2.
Tap
Tap "Operate group" to finish.
Note: Tap "Create more" to create more settings.
Enter a name for the group, in
this case "Group 1" 1 .
For use of keyboard, see the
section Keyboard.
2.
Tap
You can find the group
"Group 1" in the product
navigator.
VELUX 25
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Groups
Editing a group
You can change the contents of a group by adding or removing products.
The example shows how to add Window 4 and Window 5 to the group "Group 1" already consisting of Window 2 and Window 3.
Venetian blind 1
Blind 2
Window
Blind 1
Window
Light 3
Roller shutter 2 Roller shutter 1
Group
Window
Light 1
Roller shutter 4 Roller shutter 3
Window
Window
Light 2
Tap
Tap "Edit group".
Window
Window
Light 4
Tap "Groups".
Tap "Group 1"
2.
Tap
Scroll down the display to find
the relevant windows.
Note: The individual products
can be identified by tapping the
icon. See also the section Finding
products.
Tap "Operate group" to finish.
Note: Tap "Edit more" to create
more settings.
Tick the windows to be added
to the group 1 .
Note: Products can similarly
be removed from a group by
removing the tick.
2.
Tap
You can find the group
"Group 1" containing the additional products in the product
navigator.
VELUX 26
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Groups
Renaming a group
You can change the name of a group.
The example shows how to change the name "Group 1" into "South windows".
Tap
Tap "Rename group".
Tap "Groups".
Tap "Group 1"
2.
Tap
Enter a name for the group, in
this case "South windows" 1 .
For use of keyboard, see the section Keyboard.
2.
Tap
Tap "Operate group" to finish.
Note: Tap "Name more" to create more settings.
The group is now called "South
windows" in the product navigator.
VELUX 27

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2015:03:04 16:30:25+01:00
Create Date                     : 2015:03:04 16:30:08+01:00
Metadata Date                   : 2015:03:04 16:30:25+01:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : 453347-2014-02_KLR_web_GB_2.1.indd
Document ID                     : uuid:58f79320-d48d-45e7-8ae5-2d77fcfbcea9
Instance ID                     : uuid:e302eabf-42f1-46fb-849e-86d2b15af40b
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Page Count                      : 27
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools