VELUX America 835403 Remote control User Manual 453347 2014 02 KLR web GB 2 1 indd

Download:
Mirror Download [FCC.gov]
Document ID	2703796
Application ID	IhCNYRof0AnIY4630BjhTQ==
Document Description	User guide-2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	241.32kB (3016440 bits)
Date Submitted	2015-08-05 00:00:00
Date Available	2015-08-05 00:00:00
Creation Date	2015-03-04 16:31:02
Producing Software	Acrobat Distiller 10.1.1 (Windows)
Document Lastmod	2015-03-04 16:31:18
Document Title	453347-2014-02_KLR_web_GB_2.1.indd
Document Creator	Adobe InDesign CS6 (Windows)

VELUX INTEGRA®
KLR 200
Operation
Smart operation - Groups
Deleting a group
You can delete a group if it is not relevant anymore.
The example shows how to delete the group "South windows".
Note: Only the group is deleted. You can still operate the products individually via the product navigator.
Tap
Tap "Delete group".
Tap "Groups".
Tap "Yes".
The group "South windows" is
not in the product navigator
anymore.
However, you can still operate
the products individually via
the product navigator.
Tap the group to be deleted, in
this case "South windows" 1 .
2.
Tap
Tap
to finish.
VELUX 28
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Rooms
Creating a room
You can create rooms corresponding to the actual rooms in your home, and put your VELUX products in them. This makes it easier to find
and operate the right products.
The example shows how to create the room "Bedroom" including Window 4 and Window 5 in it.
Roller shutter 2 Roller shutter 1
Venetian blind 1
Window
Window
Blind 2
Window
Window
Light 3
Roller shutter 2
Window
Roller shutter 1
Window
Blind 1
Window
Light 1
Roller shutter 4 Roller shutter 3
Window
Window
Bedroom
Light 2
Tap
Tap "Create room".
Select "Bedroom"
2.
Tap
Tap "Rooms".
Scroll down the display to find a
name for the room on the list.
Note: You can also enter a
name of your own by tapping "Enter name". For use
of keyboard, see the section
Keyboard.
Scroll down the display and tick
the windows in the room 1 .
Note: The individual products
can be identified by tapping the
icon. See also the section Finding products.
2.
Tap
Tap "Operate room" to finish.
Note: Tap "Create more" to create more settings.
Light 4
You can now find the room
"Bedroom" in the product
navigator.
VELUX 29
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Rooms
Editing a room
You can change the contents of a room by adding or removing products.
The example shows how to add Roller shutter 2 and Roller shutter 1 to the room "Bedroom" already consisting of Window 4 and
Window 5.
Roller shutter 2 Roller shutter 1
Venetian blind 1
Blind 2
Window
Window
Blind 1
Window
Window
Light 3
Roller shutter 2
Window
Roller shutter 1
Window
Light 1
Roller shutter 4 Roller shutter 3
Window
Window
Window
Bedroom
Light 2
Tap
Tap "Edit room".
Light 4
Tap "Rooms".
Tap "Bedroom"
2.
Tap
Scroll down the display to find
the roller shutters in the room.
Note: The individual products
can be identified by tapping the
icon. See also the section Finding
products.
Tap "Operate room" to finish.
Note: Tap "Edit more" to create
more settings.
Tick the roller shutters to be
added to the room 1 .
Note: Products can similarly be
removed from a room by removing the tick.
2.
Tap
You can now see the changed
contents of the room
"Bedroom" in the product
navigator.
VELUX 30
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Rooms
Renaming a room
You can change the name of a room.
The example shows how to change the name "Bedroom" into "Child's room".
Tap
Tap "Rename room".
Tap "Rooms".
Tap "Bedroom"
2.
Tap
Select "Child's room"
2.
Tap
Scroll down the display to find a
name for the room on the list.
Note: You can also enter a name
of your own by tapping "Enter
name". For use of keyboard, see
the section Keyboard.
Tap "Operate room" to finish.
Note: Tap "Rename more" to
create more settings.
The room is now called "Child's
room" in the product navigator.
VELUX 31
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Rooms
Deleting a room
You can delete a room if it is not relevant anymore.
The example shows how to delete the room "Child's room".
Note: Only the room is deleted. You can still operate the products individually via the product navigator.
Tap
Tap "Delete room".
Tap "Rooms".
Tap "Yes".
The room "Child's room" is
not in the product navigator
anymore.
However, you can still operate
the products individually via
the product navigator.
Tap the room to be deleted, in
this case "Child's room 1 .
2.
Tap
Tap
to finish.
VELUX 32
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Favourites
Editing order of products in the product navigator
If you use some products, groups or programs more often than others, it may be convenient to show them in another order in the product
navigator.
The example shows how to put the products Window 4 and Window 5 first in the product navigator.
Tap
Tap "Order of products".
Tap
Scroll down the display to find
the relevant product, in this
case "Window 5".
Note: The individual products
can be identified by tapping the
icon. See also the section Finding products.
Tap
10
Tap "OK".
11
Tap
to finish.
12
Window 4 and Window 5 are
now at the top of the product
navigator.
Tap "Product navigator".
Scroll down the display to find
the relevant product, in this
case "Window 4".
Note: The individual products
can be identified by tapping the
icon. See also the section Finding products.
Tap three consecutive times
to put Window 4 in front of
Window 1.
Complete the actions in items
5 and 6 for Window 5 to put it
beneath Window 4.
VELUX 33
VELUX INTEGRA®
KLR 200
Operation
Smart operation - Favourites
Editing favourites
When activating the function "Favourites", the product navigator only shows the products, groups and/or programs you use most often.
You can at any time choose to see all your products, groups and/or programs again.
The example shows how to choose Window 1, Roller shutter 1 and Venetian blind 1 as favourites. In consequence, these products will be
the only ones shown in the product navigator. This may be convenient if the control pad is only to be used in the room where these products are located.
Tap "Product navigator".
Tap "Favourites".
Tap "Edit favourites".
As default all products have
been chosen as favourites.
Remove the tick for all products
not to be favourites.
Tap when only the products
to be favourites remain ticked,
in this case Window 1, Roller
shutter 1 and Venetian blind 1.
Tap
Tap
Note: The individual products
can be identified by tapping the
icon. See also the section Finding products.
Tap "OK".
The product navigator now
shows the three chosen products only.
to finish.
To be able to see all products
again, you must remove the tick
for "Show favourites" in item 8.
VELUX 34
VELUX INTEGRA®
KLR 200
Operation
Operation without using the control pad
Manual operation of centre-pivot windows
You can open and close your centre-pivot window manually.
If the window is already open, you must close it fully via the control pad first.
• Open the window by pulling downwards on the control bar of
the window.
• Close the window again by pushing the control bar back again.
Note: If you have opened the window manually, you must also
close it manually to be able to operate it with the control pad
again. This also applies to making the programs run and the window close automatically in case of rain.
VELUX 35
VELUX INTEGRA®
KLR 200
Operation
Operation without using the control pad
Closing centre-pivot windows in case of power failure or discharged battery
In case of power failure or discharged battery, you can close your
centre-pivot window manually by disengaging the chain on the ventilation flap of the window.
There are two different ways of doing this, depending on window
type, where the ventilation flap can look like A or B . See below on
how to disengage the chain on the ventilation flap according to your
window type.
The ventilation flap of the window looks like A :
1 Disengage the chain by pressing the release clip on the flap
bracket.
2 Remove the flap bracket.
3 Fold the chain as shown, and close the ventilation flap of the
window to ventilation position.
The ventilation flap of the window looks like B :
1 Disengage the chain by pressing the release clip on the flap
bracket.
2 Fold the chain as shown, and close the window manually.
When the power has been reconnected or the battery has been
recharged, you must re-engage the chain.
• Open the window manually and unfold the chain.
• Replace the flap bracket if the ventilation flap looks like A .
• Run back the chain by pressing the test button on the window
operator briefly.
• Close the window manually.
VELUX 36
VELUX INTEGRA®
KLR 200
Operation
Operation without using the control pad
Closing windows if the control pad has been mislaid
If your control pad has been mislaid, you can still close your window by carrying out the following actions.
Note: This feature is only available for the products shown.
Centre-pivot windows
Determine window type A or B as shown on the previous
page. Disengage the chain according to window type.
Press the test button on the window operator briefly. Wait
until the chain stops moving then close the window manually.
Flat roof windows
Carefully remove the cover cap on the kerb.
Press the test button on the window operator behind the cover
cap briefly and refit the cover cap.
Top-hung windows
Remove the cover of the window operator.
Press the test button on the window operator briefly and refit
the cover.
VELUX 37
VELUX INTEGRA®
KLR 200
Setting up
Start-up of a new VELUX INTEGRA® system
Initial set-up
Before you can operate your VELUX INTEGRA® products, they must be registered in the control pad.
Remove the battery compartment lid
by pressing the release button with a
screwdriver as illustrated 1 , 2 .
Insert batteries (type AA/LR6) 3 .
Replace lid.
In the display screen, roll the
wheel in the directions of the
arrows to choose language 1 .
2.
Tap
Follow the instructions in the
display, and tap when you
are ready.
Tap
when the control pad
has found all products.
Note: Tap "Search again" if
the control pad did not find
all products and follow the
instructions in the display. Go
to the section If the initial setup fails if the control pad still
cannot find all products even if
they are connected to power.
Tap "OK".
VELUX 38
VELUX INTEGRA®
KLR 200
Setting up
Start-up of a new VELUX INTEGRA® system
If the initial set-up fails
If the control pad cannot find some of the products, you can make the products ready for registration by manually resetting them to their
initial factory settings.
Note: Reset products cannot be operated until they have been registered in the control pad. See the section Initial set-up.
Products can be reset in different ways, depending on window type.
Open window manually (if the window is already open, close it
by pressing the test button on the window operator).
Press the test button on the window operator for at least
10 seconds.
The window operator and other electrical products on the
window will run briefly back and forth. Frame lights, if installed,
will flash briefly.
Flat roof windows
Carefully remove the cover cap on the kerb.
Press the test button on the window operator behind the cover
cap for at least 10 seconds.
The window operator and other electrical products on the
window will run briefly back and forth. Refit cover cap.
Modular skylights
Remove bottom flashing section from the modular skylight and
unscrew the small, right-hand cover of the control unit.
Press the reset button in the control unit for 6-10 seconds.
Screw on the cover again and refit bottom flashing section.
Note: As registration in the control pad must take place within
10 minutes, you are advised to register the products before refitting bottom flashing section.
Centre-pivot windows
INT
Note: Contact your local VELUX sales company for reset of products not shown.
VELUX 39
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system
Adding products to the control pad
You can operate up to 200 products, for instance windows, roller shutters and blinds, by registering them in your control pad.
The example shows how to add more products to the control pad by following the instructions in the display.
Tap
Tap "Add new products".
Tap when the control pad
has found the products.
Tap "New product".
Tap
You can now operate the new
products.
VELUX 40
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a control to your system already operated with a
VELUX INTEGRA® control pad KLR 200
"Control" is used as a generic term for all devices that can operate
VELUX INTEGRA® products.
To operate your VELUX INTEGRA® products with additional controls,
the contents of the control pad KLR 200 already in use can be copied
to other controls.
Note: If you have edited the standard programs or made your own
programs, these are not copied to the additional control.
To find the control you want to add to your system, please see the
page references below.
VELUX INTEGRA®
control pad KLR 200
(3LR A02)
Pages 42-43
VELUX INTEGRA®
controller KRX 100
(3LF D02)
Pages 44-46
VELUX INTEGRA®
remote control without display
(3UR B01)
Page 47
VELUX INTEGRA®
interface KLF 050 fitted
into a wall switch/socket
of another make
(3LF D50)
Page 49
VELUX INTEGRA®
interface KLF 100
(3LF D01)
Pages 50-51
Other types of io-homecontrol®
controls
Pages 52-53
¿
VELUX INTEGRA®
control switch KLI 110
(3LI D01)
Page 48
VELUX 41
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® control pad KLR 200 to your system already operated with a control pad KLR 200
The instructions below show how to copy the contents of one
control pad KLR 200 to another.
Control pad KLR 200 to send a copy is called control A .
Control pad KLR 200 to receive a copy is called control B .
First execute items 1-4 with
Remove the battery compartment lid
by pressing the release button with a
screwdriver as illustrated 1 , 2 .
Insert batteries (type AA/LR6) 3 .
Replace lid.
In the display screen, roll the
wheel in the directions of the
arrows to choose language 1 .
2.
Tap
Follow the instructions in the
display and tap when you
are ready.
Do not tap "Receive copy" until
item 9.
Continue on the next page
VELUX 42
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Now execute items 5-8 with
Tap
Tap "Copy control pad".
Tap
You now have two minutes to execute item 9 with
Tap "New product".
Tap "Receive copy".
Follow the instructions in the
display and tap when you
are ready.
11
Tap on both control pads to
finish.
10
Tap "OK".
VELUX 43
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® controller KRX 100 to your system
already operated with a control pad KLR 200
The instructions below show how to copy the contents of control
pad KLR 200 to controller KRX 100. See also the instructions for
the controller.
Note: Only available for VELUX INTEGRA® products with radio
frequency 868 MHz.
Control pad KLR 200 to send a copy is called control A .
Controller KRX 100 to receive a copy is called control B .
First execute items 1-3 with
Connect to mains supply:
Remove the back cover of the controller as shown. Click the adaptor plug into the controller and replace the cover. Connect the
adaptor to mains supply.
Note: The controller saves the selected settings even if the mains
supply is disconnected. Therefore, it is advisable not to fit the
controller permanently until the sunscreening products and the
sensors have been registered in the controller.
However, time and date are only saved for 30 seconds after disconnection of mains supply.
RESET
Select language:
to highlight your
Press
language.
Press
"Enter" to confirm
your choice.
LANGUAGE
Dansk
English
Français
Deutsch
Enter
P1
P2
SET TIME
11:0 0
Enter
Back
P1
P2
Set time:
Press
to set minutes.
Press
"Enter" to change to
hours.
Press
to set hours.
Press
"Enter" to confirm
your settings.
Continue on the next page
VELUX 44
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Prepare sensors and register them in the controller.
Note: You have 10 minutes to execute items 4-8.
Prepare sensors for registration:
Press the button at the bottom
of the sensor with a pointed
object for at least 5 seconds
until the diode flashes.
reset
AUTO SET-UP
Prepare sensors
for registration and
press Register
within 10 minutes
Register
Register sensors in the controller:
"Register" to register
Press
the two sensors.
Back
reset
Registration is running. This
may take several minutes.
AUTO SET-UP
INFORMATION
Sensor
registered
The display shows "Sensor registered" when the sensors have
been registered.
Press
"Continue" to proceed.
Continue
INFORMATION
VELUX ACTIVE
not enabled
Menu
Enable
Execute items 10-13 with
10
The display shows that the
program VELUX ACTIVE has
not been enabled.
Press
"Enable" to start
registration of sunscreening
products in the controller.
AUTO SET-UP
Prepare products
for registration and
press Register
Register
Do not press "Register" until
item 14.
Back
Tap
11
Tap "New product".
12
Tap "Copy control pad".
13
Tap
Continue on the next page
VELUX 45
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
You now have two minutes to execute item 14 with
14
AUTO SET-UP
Prepare products
for registration and
press Register
Register
INFORMATION
VELUX ACTIVE
enabled
18
Press
"Register" in the controller to start registration.
15
AUTO SET-UP
Registration is running. This
may take several minutes.
Back
16
Menu
Details
The display shows that the
program VELUX ACTIVE has
been enabled.
If the display shows that the
program VELUX ACTIVE has
not been enabled, please refer
to the section Initial set-up,
Interior sunscreening products
in the instructions for the
controller.
Tap
The display shows the program
mode including current temperature and time.
12 : 32
17
25°C
Menu
Disable
to finish.
VELUX 46
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® remote control without display to
your system already operated with a control pad KLR 200
The instructions below show how to copy the contents of control
pad KLR 200 to the remote control without display. See also the
instructions for the remote control.
Note: Only available for VELUX INTEGRA® products with radio
frequency 868 MHz.
Control pad KLR 200 to send a copy is called control A .
The remote control without display to receive a copy is called
control B .
First execute items 1-5 with
Tap "Prepare one-way control".
Tap "Choose products".
Tap "New product".
Tap
Scroll down the display and choose
the product to be added 1 .
Note: individual products can be
identified by tapping the icon. See
also the section Finding products.
2.
Tap
You now have 10 minutes to execute item 6 with
Max 1 sec
Press briefly the RESET button
on the back with a pointed
object to register the new
product.
You can now operate the chosen product with B .
Tap
to finish.
Note: To add more products,
tap "Choose more" and repeat
items 5-7.
VELUX 47
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® control switch KLI 110 to your
system already operated with a control pad KLR 200
The instructions below show how to copy the contents of control
pad KLR 200 to control switch KLI 110. See also the instructions
for the control switch.
Control pad KLR 200 to send a copy is called control A .
Control switch KLI 110 to receive a copy is called control
First execute items 1-5 with
Tap
Tap "New product".
Tap "Prepare one-way control".
Tap "Choose products".
Scroll down the display and choose
the product to be added 1 .
Note: individual products can be
identified by tapping the icon. See
also section Find products.
2.
Tap
You now have 10 minutes to execute item 6 with
Max 1 sec
Press briefly the RESET button
on the back to register the new
product.
You can now operate the chosen product with B .
Tap
to finish.
Note: To add more products,
tap "Choose more" and repeat
items 5-7.
VELUX 48
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® interface KLF 050, which is fitted
into a wall switch/socket of another make, to your system
already operated with a control pad KLR 200
The instructions below show how to copy the contents of control
pad KLR 200 to interface KLF 050 fitted into a wall switch/socket of another make. See also the instructions for the interface.
Note: Only available for VELUX INTEGRA® products with radio
frequency 868 MHz.
Control pad KLR 200 to send a copy is called control
Interface KLF 050 to receive a copy is called control
First execute items 1-5 with
Tap "Prepare one-way control".
Tap "Choose products".
Scroll down the display and
choose the product to be added 1 .
Note: The individual products
can be identified by tapping the
icon. See also the section Finding
products.
2.
Tap
You now have 10 minutes to execute item 6 with
Tap "New product".
Tap
Max 1 sec
Press briefly the SET button on
the back with a pointed object
to register the new product.
You can now operate the chosen product with B .
Tap
to finish.
Note: To add more products,
tap "Choose more" and repeat
items 5-7.
VELUX 49
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® interface KLF 100 to your system
already operated with a control pad KLR 200
The instructions below show how to copy the contents of control
pad KLR 200 to interface KLF 100. See also the instructions for
the interface.
Control pad KLR 200 to send a copy is called control A .
Interface KLF 100 to receive a copy is called control B .
First execute item 1 with
Follow the instructions for
the interface until the section
where menu item H is highlighted.
A B CD E F GH
SYSTEM SETTINGS
Register products
Select products
Security key
Enter
Back
Now execute items 2-5 with
Tap
Tap "New product".
Tap "Copy control pad".
Tap
Continue on the next page
VELUX 50
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
You now have two minutes to execute item 6 with
A B CD E F GH
SYSTEM SETTINGS
Register products
Select products
Security key
Enter
Back
INFORMATION
New products registered
Press
to highlight
"Register products".
Press
"Enter" to confirm
your choice.
AUTO SET-UP
Automatic registration is running. Please wait. The registration can take up to one minute.
Back
The display shows that the
new product(s) has/have been
registered.
Back
10
Tap
A B CD E F GH
Press
"Back" to finish.
SYSTEM SETTINGS
Register products
Select products
Security key
Enter
Back
to finish.
VELUX 51
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding other types of io-homecontrol® controls to your system
already operated with a VELUX INTEGRA® control pad KLR 200
The instructions below show how to copy the contents of control
pad KLR 200 to another type of io-homecontrol® control. See also
the instructions for the control in question.
¿
Note: Only available for VELUX INTEGRA® products with radio
frequency 868 MHz.
Control pad KLR 200 to send a copy is called control A .
io-homecontrol® control to receive a copy is called control
The instructions are divided into two
sections:
Instructions for one-way controls
marked with this symbol on the product
Instructions for two-way controls
marked with this symbol on the product
One-way controls
First execute items 1-5 with
Tap
Tap "Prepare one-way control".
Tap "Choose products".
Scroll down the display and choose
the product to be added 1 .
Note: The individual products
can be identified by tapping the
icon. See also the section Finding
products.
2.
Tap
You now have 10 minutes to execute item 6 with
Tap "New product".
¿
See instructions for the
io-homecontrol® control.
Tap
to finish.
VELUX 52
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Two-way controls
First execute items 1-4 with
Tap
Tap "Copy control pad".
You now have two minutes to execute item 5 with
Tap
Tap
to finish.
Tap "New product".
¿
See instructions for the
io-homecontrol® control.
You may also refer to the
section Joint operation of
io-homecontrol® products.
VELUX 53
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® control pad KLR 200 to your system
already operated with another control
"Control" is used as a generic term for all devices that can operate
VELUX INTEGRA® products.
To operate your VELUX INTEGRA® products with additional controls,
the contents of the control already in use can be copied to your new
control pad KLR 200.
Note: If you have edited the standard programs or made your own
programs, these are not copied to your new control pad.
To find the control already operating your system, please see the
page references below.
VELUX INTEGRA®
remote control KLR 100
(3LR A01)
Pages 55-56
VELUX INTEGRA®
controller KRX 100
(3LF D02)
Pages 57-58
VELUX INTEGRA®
interface KLF 050 fitted
into a wall switch/socket
of another make
(3LF D50)
Pages 63-64
VELUX INTEGRA®
interface KLF 100
(3LF D01)
Pages 65-66
Other types of io-homecontrol®
control
Pages 67-68
¿
VELUX INTEGRA®
remote control without display
(3UR B01)
Pages 59-60
VELUX INTEGRA®
control switch KLI 110
(3LI D01)
Pages 61-62
VELUX 54
VELUX INTEGRA®
KLR 200
Setting up
Extension of your VELUX INTEGRA® system - Adding a control
Adding a VELUX INTEGRA® control pad KLR 200 to your
system already operated with a remote control KLR 100
The instructions below show how to copy the contents from the
remote control KLR 100 already in use to control pad KLR 200.
See also the instructions for the remote control.
Remote control KLR 100 to send a copy is called control A .
Control pad KLR 200 to receive a copy is called control B .
First execute items 1-4 with
Remove the battery compartment lid by
pressing the release button with a screwdriver as illustrated 1 , 2 .
Insert batteries (type AA/LR6) 3 .
Replace lid.
In the display screen, roll the
wheel in the directions of the
arrows to choose language 1 .
2.
Tap
Follow the instructions in the
display and tap when you
are ready.
Do not tap "Receive copy" until
item 8.
Continue on the next page
VELUX 55

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2015:03:04 16:31:18+01:00
Create Date                     : 2015:03:04 16:31:02+01:00
Metadata Date                   : 2015:03:04 16:31:18+01:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : 453347-2014-02_KLR_web_GB_2.1.indd
Document ID                     : uuid:aefd72cd-fe1a-477e-a6fb-7bcec5f5e414
Instance ID                     : uuid:68c9efb1-3c1a-4740-be6e-000beeb5725a
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Page Count                      : 28
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools