WJ Communications SX1115 User Manual Copy of email sent to you and Kwok re MPE

WJ Communications, Inc. Copy of email sent to you and Kwok re MPE

Copy of email sent to you and Kwok re MPE

GCzumak request part 1: Copy of email to Kwok ChanThank you very much for the info, Kwok. Re your comments:1.(a) The 12/03 upload is correct; the final version will include the co-location issues shown inthe earlier upload1.(b) The first line of p7 will read 14-34 dBi in the production version of the user manual.Hope this will do it for getting the grant. Again, thanks for the extra effort in letting me know soquickly.Best regardsTom>Greg:>>Watkins Johnson, EA 95108 ->>1. Major RF exposure issues have been addressed in latest uploaded files. There are a fewminor items that may need confirmation>>(a) The latest upload on 12/10/99, which is a PDF file for revised page 7 of the Watkins Johnsonmanual, does not address co-location issues as indicated in one of the earlier uploads received on12/03/99. Please confirm the earlier one with co-location info is the correct one. We will includeco-location requirements on the grant comment.>>(b) First line of the revised page 7 should be 14-34 dBi, not 18-34 dBi. Please confirm it will berevised accordingly to avoid confusion.>>(c) The footnote below Table 2 on revised page 7 identifies the 5 antennas included in this filingand also indicates "Other antenna types may be used, provided applicable requirements in FCCrule parts 2 and 15 are met." Greg: Please let me know if there is any conflict in this statementand the existing rules - are separate approvals or Class II changes needed if there are substantialchanges in antenna type, i.e. is it a Class I type of self-verification to demonstrate meeting Part 2& 15 requirements or Class II filing is needed. If so, that sentence may need to be modified, suchas, "Other antenna types may require separate approval for meeting FCC requirements, consultWatkins Johnson etc....">>Note: the latest reply is requesting a change in output power from 316 mW to 603 mW, to matchmeasured and MPE info etc. Please see reply response of 12/03/99 under Users Manuals exhibit,the 6th file from the end, item # 5(a).>>Suggested Grant condition - Antennas used for this transmitter must be professionally installedon permanent structures for outdoor operations to qualify for categorical exclusion from routineMPE evaluation. Appropriate installation instructions, requirements and minimum separationdistances, as determined in the filing, must be given to installers to ensure antenna installationssatisfy MPE compliance for fixed transmitter operations. If an antenna is co-located with otherantennas at a site, RF exposure requirements for the site must be satisfied with respect to1.1307(c). Separate approval for RF exposure compliance is required for all other non-fixed andindoor operations.
>>Kwok Chan>>>>> Tom Cokenias <trephonc@macconnect.com> 12/10/99 09:29AM >>>>Kwok>>I submitted a .pdf version to the website of the updated MPE and antenna>installation information - formatted by WJ to fit into the manual.>>Please let me know by return if this is OK as today is the announcement date>>Best regards>>Tom

Navigation menu