WJ Communications SX1115 User Manual UNII

WJ Communications, Inc. UNII

Mobil Mark antenna info

SpecificationsFrequency: See aboveGain: See aboveBandwidth @2:1 SWR: 200 MHz or betterImpedance: 50 Ohm nominalMaximum Power: 100 WattsOD Series Beamwidth: 14o vertical, 360o horizontalSCR Series Beamwidth: 30o vertical, 60o horizontalFront-to-Back ratio: 30 dB for SCR SeriesLightning Protection: External protectionrecommendedSCR Series Aperture: 3" x 5.5" front faceSCR Panel Size: 3" x 3" eachOD Series Size: 18" length x 1" diameterMax Wind Velocity: 100 mph, all modelsSCR Series Material: Irridited aluminum, ABSplastic radome materialOD Series Material: ABS Black radome, withirridited aluminum feedWeight: <1 lbs, all modelsMounting: Pole or surface mount,hardware included.Mounting Dimension: Mounts up to 2" outsidediameter mastSCR Series Connector: N female attached atrear of antennaOD Series Connector: N femaleProductSpecificationsModel NumbersModel Description FrequencySCR14-5150 14 dBi Corner Reflector 5.15-5.35 GHzSCR14-5725 14 dBi Corner Reflector 5.72-5.83 GHzOD9-5250 9 dBi Omnidirectional 5.15-5.35 GHzOD9-5725 9 dBi Omnidirectional 5.72-5.83 GHzSpecial configurations are available upon request.Please consult factory for more information.OD SeriesSCR SeriesMobile Mark's high frequency antennas are designed fornew microwave systems, including U-NII wireless net-working applications. These advanced designs accom-modate the high-speed wideband performance that thenew services will provide.The directional corner reflectors use a half-wavelengthelement configuration. A unique balun fed design pro-vides high efficiency radiation without skewing theradiation pattern. The result is excellent bandwidth, gain3900-B River Road, Schiller Park, IL 60176 Tel: 800-648-2800 or 847-671-6690 Fax: 847-671-6715Visit our web page at www.mobilemark.com. Specifications subject to change without notice (09/99).and match over the frequency range. One model coversboth of the lower bands (5.15 - 5.35 GHz) and anothercovers the upper band. Each reflector panel is only 3" x3". The antenna element is protected in an ABS radome,the panels are irridited for all-weather protection. Thefemale N connector exits at the back of the corner. Themounting hardware provided allows for pole or surfacemount, U-bolts are included.The omni antennas use an array of uniquely phasedelements stacked vertically. This compresses theantennas beamwidth for vertical gain, while maintaining auniform omni pattern in the azimuth. The unique phasingmaintains excellent frequency response. The array isprotected in a black ABS radome. The entire assembly isonly 18 inches long, with the radome diameter only 1".Windloading on this antenna is negligible. An offsetmounting plate is provided with U- bolts allowing pole,ceiling or surface/offset mounting. The antenna termi-nates with a female N connector for maximum reliability.■14 dBi Corner Reflector for point topoint applications■9 dBi Omni for multipoint applications■Models available for 5.15 - 5.83 GHz■Versatile mounting hardware includedfor pole or surface mounting5 GHz Antennas (Pat.Pend.)Omni & Directional Site

Navigation menu