Zida Technologies MB-P845GL Motherboard User Manual 845 SERIES MANUAL V2 0 ENGLISH
Zida Technologies Ltd. Motherboard 845 SERIES MANUAL V2 0 ENGLISH
Contents
manual 1 of 9
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of MANUFACTURER. WITHOUT WARRANTY OF ANY KIND, MANUFACTURER PROVIDES THIS MANUAL SIS EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MANUFACTURER, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THlS MANUAL OR PRODUCT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe. Intel, Celeron, Pentium are registered trademark of Intel Corporation. Intel is a registered trademark of Intel Corporation. Cyrix is a registered trademark of VIA Technologies, Incorporated. IBM, IBM PC, IBM PC/AT, PC-DOS, OS/2 and OS/2 WARP are registered trademarks of International Business Machines Corporation. Ms-DOS, Windows, Windows NT, Windows 98, Windows 95 and Windows 2000 are registered trademarks of Microsoft Corporation. AMI BIOS is a product of American Megatrends, Inc. AWARD BIOS is a product of Award Software Inc. Third-party brands and names mentioned in this User Manual are the property of their respective owners. The product name and revision number are both printed on the board itself. Manual revisions are released for each board design represented by the digit before and after the period of the manual revision number. Manual updates are represented by the third digit in the manual revision number. SPECIFlCATlONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATION USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS COMMITMENT BY MANUFACTURER. MANUFACTURER ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Manual Revision:2.00 Release Date:2002-6 P/N:90-P48452-00-00 Copyright is owned by ZIDA Technologies Co.,LTD Specifications subject to change without prior notice. All brand names and trademarks are the property of their respective owners. If you want to know more information about us,please logo our Website: Http://www.ZIDA.com Please keep in touch with us by the list in any time. Address Huaji Technologies Building., Houhai Road,Shekou, Shenzhen, Guandong, China Post Code: Telephone: Fax: e-mail: 518067 (86)755-6818100 (86)755-6813443 zidasale@ZIDA.com (Marketing Dept) mbtsc@ZIDA.com (Techsupport Dept) HQ in Hongkong Address: 8/F.,Block A,Goodview Industrial Building,11Kin Fat Street, Tuen Mun,N.T.Hong Kong Telephone: 852 22766000 Fax: 852 24560717 Contents chapter 1:Package contents........................................................................1 chapter 2:Product Introduction..........................................................................2 2.1 2.2 Features & Mainboard Diagram.....................................................2 Connector configuration...............................................................14 chapter 3:Setup quickly ........................................................................19 3.1 3.2 3.3 3.4 3.5 3.6 3.7 How to identify the product's mode...............................................19 Set the jumper................................................................................20 How to setup BIOS quickly............................................................22 How to install mainboard driver.....................................................22 How to enable 4ch or 5.1ch output................................................25 How to identify that the 4ch or 5.1ch is enabled............................26 How to set Super password and user password...........................30 chapter 4:BIOS Setting...............................................................................31 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 Award BIOS Description................................................................31 Standard CMOS Features Setup .................................................33 Advanced BIOS Features Setup .................................................34 Advanced Chipset Features Setup ..............................................36 Integrated Peripherals.................................................................38 Power Management Setup....... ....................................................41 PNP/PCI Configuration Setup.......................................................42 PC Health Status...........................................................................43 Frequency Control.........................................................................44 Load Fail-safe Defaults ................................................................45 Load Optimized Defaults ..............................................................45 Set Supervisor/User Password......................................................46 Save & Exit Setup..........................................................................47 Exit Without Saving.......................................................................47 chapter 5: Hardware Installation..............................................................48 chapter 1:Package Contents Remove the items from the box and make sure you have the following items before beginning. If any of the items below are missing, please contact the representative for part replacement. 1) 2) 3) 4) 5) Package contents Standard Item Mainboard Driver CD User Manual IDE Hard Drive Ribbon Cable Floppy Drive Ribbon Cable Mainboard Manual page 1 Chapter 2:Product Introduction Thank You for purchasing the 845 series Mainboard.There are some product specification for the relation models as following. A845E mainboard Support Intel 478pin Pentium4 FC-PGA 2(Willamette/Northwood) Support 400MHz and 533MHzProcessor System Bus Intel 845E + ICH4 Chipset Two 184pin DDR DIMM slots support up to 2G Memory Capacity Support PC1600 and PC2100 DDR DIMM(DDR200/DDR266) Auto Jumper 5 x PCI slots, 1 x CNR slot 1 x 4X AGP expansion slot 6 x USB2.0 ports(2xUSB2.0 in the front panel,3xUSB2.0 in the Rear panel,1xUSB2.0 in the CNR slot) , 1 x IrDA port header 1 x double FDD port, 1 x LPT port with ESD/EMI protection, 2 x COM ports Support Temperature ,Fan speed, Voltages Hardware monitoring overheat protection over CPU Dual IDE Channels support Four Ultra-DMA33/66/100 IDE Devices Integrated AC97 Audio Onboard(supply 2ch,4ch or 5.1ch)(optional) AC97 2.1(or AC972.2) Compliant Codec with 3D Stereo Enhancement 1 x Line-out, 1 x Line-in, 1 x Mic-in Support to stereo muti channel output(Front Speaker,Rear Speaker, Center/Sub-woofer speaker) 1xstandard Audio Front panel header 1 x CD-in, 1 x AUX-in, 1 x Game Port overcurrent protection over Keyboard & PS/2 Mouse Support Suspend-to-RAM(STR) Award BIOS PC99/ACPI/DMI Compliant ATX Power Supply Interface ATX form factor 305mm x 190mm page 2 Mainboard Manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2002:08:05 13:57:53-04:00 Create Date : 2002:08:05 13:57:39-04:00 Title : 845 SERIES MANUAL V2.0-ENGLISH. Author : cad1 Creator : PScript5.dll Version 5.2 Producer : AFPL Ghostscript 7.0 Page Count : 6EXIF Metadata provided by EXIF.tools