Zida Technologies MB-P845GL Motherboard User Manual 845 SERIES MANUAL V2 0 ENGLISH

Download:
Mirror Download [FCC.gov]
Document ID	263571
Application ID	Uf+afHLvlT4dohBc5+KgJw==
Document Description	manual 5 of 9
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	228.47kB (2855893 bits)
Date Submitted	2002-08-15 00:00:00
Date Available	2002-08-06 00:00:00
Creation Date	2002-08-05 14:02:39
Producing Software	AFPL Ghostscript 7.0
Document Lastmod	2002-08-05 14:02:53
Document Title	845 SERIES MANUAL V2.0-ENGLISH.
Document Creator	PScript5.dll Version 5.2
Document Author:	cad1

chapter 3:Setup Quickly
Second: You need to select the OS type which you have installed.
Third: Select the install item,shows as below:
1.Chipset driver: Outline the OS how the chipset components shall be
configured.
2.Modem: If the M/B which you purchased integrated the Modem, you
need to select this item to install the Modem driver..
3.Sound chip drive: Our M/B integrated the onboard sound codec (AC97).
If you want to use this onboard sound codec, you need to select the IC
type which show as below, and install the driver.
4.UATA Driver: Intel Ultra ATA optimize program, increase the efficiency
of IDE .(Option install)
At the end of the installation of drive, we recommend to restart your
computer and assure program setting.
page 24
Mainboard Manual
chapter 3:Setup Quickly
THE SOUND CODEC IC (AC97) INTEGRATED ON YOU M/B
ALC201A
CS4299
CMI9738
CMI9739
3.5 How to enable 4ch or 5.1ch output
1) Please select the logo,which shows"C-media Audio Configuration",click
the mouse left button,and soon the dialog box will be shown.
2) In the dialog box ,select the item of "4",which is the selection of four
channel output.Click "ok",and four channel output is enabled.
Mainboard Manual
page 25
Setup Quickly
This question will be explain by CMI9738 in Win2000.
chapter 3:Setup Quickly
3.6
How to identity that Four channel output or 5.1 channel
output is enabled?
It's still explain by CMI9738.
1 First :install CMI9738 Four channel Audio driver and applications:
a.Select the CMI9738 Audio installation in the Mainboard CD,and the
dialog box will be shown:
b. Select "Install Device Driver and Applications",The dialog boxes will be
shown one by one in the list.Please click the "next" in picture 1--picture 5.
Picture 1
page 26
Picture 2
Mainboard Manual
Picture 3
Picture 4
Picture 5
Picture 6
Mainboard Manual
Setup Quickly
chapter 3:Setup Quickly
page 27
chapter 3:Setup Quickly
c. At last the diagram will be shown.Click"Finish",and the installation of
Audio Applications is over.
d.Install Audio Driver.when the picture 2 is shown,click "ok",and restart your
computer.The whole installation is over.
picture 1
picture 2
page 28
Mainboard Manual
Chapter 3:Setup Quickly
Open the application of"Muti-channel audio demo"in the menu of "
C-media Audio".
Next diagram.
Click "Demo1" or "Demo2"
Setup Quickly
and Audio output should happen in the
Front speaker and Rear speaker.
Mainboard Manual
page 29
chapter 3:Setup Quickly
3.7 How to set Super password and User password
Please follow the steps as below to set the Super password and
user password;
1) Press "DEL" key inter bios setup when boot-start;
2) In"Set Supervisor Password"set super password.Please enter
according to the introduce.
3) In"Set User Password"set user password.Please enter according to
the introduction.
4) After you finish the setting of password,you should set the option"
Security Option",which lies in
Advanced BIOS Features item.
If "System" is chosen, a user password prompt appears every time
the computer is turned on. If "Setup" is chosen, the password prompt
appears when you try to enter setup .
5) After finished your setting,please don't forget to save it and enable it
effective.
6) When you forget your password for some reason,you can open you
computer,clear CMOS in Power-off.(refer 3.2)
page 30
Mainboard Manual
chapter 4:BIOS Setting
4.1
AWARD BIOS Description
The BIOS (Basic Input/Output system) provides the low-level support for
the standard devices such as disk drives,serial and parallel ports.It contains
codes for advanced features found on the system board such as virus and
password protection.
it is very important to configure the BIOS correctly;otherwise the system board
according to the new hardware installed.
* To configure the provided special feature of the BIOS.
* The CMOS RAM has lost the content due to out of battery.
Starting AWARD BIOS setup
The bios read the system information contained in the CMOS and begins the
process of checking out the system and configuring it. After the POST (Power
On Self Test) has finished,it'll appear the following message on the screen:
"Press DEL to enter SETUP"
Press the key to call up the Setup.When you invoke Setup,the CMOS
SETUP main menu appears the following options.(Its option may have little
difference for different model).
Mainboard Manual
page 31
BIOS Setting
may not work properly.There are three situations for the user to configure the
BIOS.
* The hardware configuration data stored in the BIOS need to be changed
chapter 4:BIOS Setting
Award BIOS Setup
Standard CMOS Feature
Set time & date, hard disk drive type, type of
floppy drive, Monitor type.
Advanced CMOS Feature
Select system boot sequence, floppy control,
CPU cache settings, Shadow RAM.
Advanced Chipset Feature
Configure chipset specific options and features
Integrated Peripherals
Configure onboard I/O device addresses and
operating modes.
Power Management Setup
Select various power saving options.
PnP/PCI Configurations
Set PCI Plug and Play device options.
PC health Status
Report system / CPU temperature and cooling
fans status.
Frequency/Voltage Control
Select CPU' s Front Side Bus (FSB) frequency
and core/bus frequency ratio.
Load Fail-Safe Defaults
Load settings that are more likely to configure a
workable computer when something is wrong. If
you cannot boot the computer successfully,
select the Fail-Safe option and try to diagnose
the problem after the computer boots. These
settings do not provide optional performance.
Load Optional Defaults
Load settings that provide best performance
characteristic. (Default factory settings)
Setup Supervisor Password Change / Add / Remove supervisor password.
Setup User Password
page 32
Change / Add / Remove user password.
Mainboard Manual
chapter 4:BIOS Setting
Time / Date
These fields provide you with the current date and time. Note that the hour is
displayed as a 24-hour clock. For example, 1:00 PM is 13:00:00.
Floppy Drive A,
Floppy Drive B(A845DD,A845SD,A845E,P845SD)
This option selects the type of floppy drives installed.
Primary Master,
Primary Slave,
Secondary Master,
Secondary Slave
These options enter another menu for hard disk detection by click "Enter" key.
Video
This field allows you to select monitor type .Options are:" MONO"," CGA40","
CGA80" and " EGA/VGA".
Halt on
Allow the system to halt during BIOS boot up when error occurs.
Options are " All,But keyboard"," All,But Diskette"," All,But Disk/Key"," No
errors"," All Errors".
Base Memory,Extended Memory,Total Memory
Display the current size of memory installed.
Mainboard Manual
page 33
BIOS Setting
4.2 Standard CMOS Features
chapter 4:BIOS Setting
4.3
Advanced BIOS Features
-3 BIOS


Virus Warning
Enabled / Disabled Virus Warning function. Default setting is "Disabled".
CPU L1&L2 Cache
Enables processor on-chip L1 and L2 cache memory. Default is "Enabled".
Quick Power on Self Test
When Enabled, BIOS will skip certain power-on self-test (POST) procedures
(such as memory test above 1MB) to speed up the boot process. Default
setting is "Disabled".
First / Second / Third Boot Device
Assign the priority of each storage device to be the boot-up drive. Supported
devices are HDD, Floppy, LS-120, ATAPI ZIP, CDROM, SCSI, NETWORK.
Default boot sequence is Floppy -> HDD-0 -> CDROM.
Boot Other Devices
Specifies whether BIOS to boot from other device not listed in the 1st/2nd/3rd
Boot Device options when BIOS fail to boot from those devices. Default setting
is "YES".
Swap Floppy Drive
Set this option to "Enabled" to permit drives A: and B: to be swapped. Default is
"Disabled".
page 34
Mainboard Manual
Boot Up Floppy Seek
Specify whether floppy drive A: will perform a Seek operation at system boot.
Default setting is "Disabled".
Boot Up NumLock Status
Set this option to "OFF" to turn the Num Lock key off when the computer is
booted so you can use the arrow keys on both the numeric keypad and the
keyboard. Default is "ON".
Gate A20 Option
Sets "Fast", lets chipset control Gate A20; Sets "Normal", lets a pin in the
keyboard controller control Gate A20. Default setting is "Fast".
Typematic Rate setting
Enabled / Disabled Typematic Rate setting, when enabled,the typematic rate
and typematic delay can be selected. Default setting is "Disabled".
Security Option
Enables password checking every time the computer is powered on or every
time BIOS Setup is executed. If System is chosen, a user password prompt
appears every time the computer is turned on. If "Setup" is chosen, the
password prompt appears if BIOS Setup is executed. Default is "Setup".
APIC Mode
Enables advance program interrupt control
MPS Version Control For OS
Options are 1.1 and 1.4.Default is "1.4".
OS Select For Dram > 64MB
Set to "Enabled" if running OS/2 operating system and using more than 64MB
system memory. Default is "Disabled".
Report No FDD For Win95
Selects "YES"when the system is running Win95 and no FDD is installed.
Default is "NO".
Small logo(EPA) Show
Enable/Disable EPA logo to be shown during bootup.
Mainboard Manual
page 35
BIOS Setting
chapter 4:BIOS Setting
chapter 4:BIOS Setting
4.4 Advanced Chipset Features
DRAM Timing Selectable
Manual/By SPD.Select"By SPD" to allow BIOS to get the optimized timing data
from the data stored on the DIMM modules.Otherwise,select"Manual"to
configure the following timing constrains.
CAS Latency Time
Specifies the number of SCLKs between the time when the read command is
sampled by DRAM and the Whitney Sample reads data from DRAM.Available
setting are 1.5,2,2.5.
Active to Precharge Delay
Specifies the active to precharge delay:The setting is 7,6,5.
DRAM RAS-to-CAS Delay
Specifies the length of the delay inserted between the RAS and CAS signals of
the DRAM system memory access cycle. The settings are 2 SCLKs or 3 SCLK
s. Default setting is "3".
DRAM RAS Precharge
Specifies the length of the RAS precharge part of the DRAM system memory
access. Available settings: 2 SCLKs, or 3 SCLKs. Default setting is "3".
DRAM DATA Integrity Mode
Display integrity mode of the DIMM modules.Option are Non-ECC/ECC.Defaults
setting is "Non-ECC".
page 36
Mainboard Manual
Memory Frequency For
Set frequency of DIMM memory.Default is "AUTO".
CPU Latency Timer
Enables CPU BIST. Default is "Disabled".
Buffer Strength Control
This option allows the experience user to fine tune the DRAM control setting.
Leave this setting as default will have more safe & stability performance.
DRAM Read Thermal Mgmt
Select "Enable" to allow Dram Read Thermal Mgmt to manage DRAM speed
according to it's temperature.Once the DRAM temperature increase to a specific
level,Thermal Mgmt will slow down DRAM speed for a certain period of time(can
be specific in "Delay Prior to Thermal")in order to cool down the DRAM
temperature to determine whether to change DRAM speed back to its normal
operation speed or not. Default is"Disabled".
System BIOS Cacheable
Enabled/Disabled System BIOS catch.Default setting is "Disabled".
Video Bios cacheable
Enabled/Disabled Video BIOS catch.Default setting is "Enabled".
Video RAM cacheable
Enabled/Disabled S-Video RAM catch.Default setting is "Disabled".
Memory Hole At 15M-16M
Enabled/Disabled Memory Hole at 15M-16M.Default is "Disabled".
Delayed Transaction
Enabled/Disabled ICH(I/O Controller Hub) delayed transactions for internal
register,firmware Hub(FWH) and Low Pin Count(LPC)interface access.default is
"Disabled".
AGP Aperture Size
Set maximam memory aperture for onboard AGP port.Available settings are
4MB,8MB,16MB,64MB,128MB and 256MB.Default is "128MB".
Delay Prior to Thermal
You must have "Dram Read Thermal Mgmt" option enabled in order for this
option tobe meaningful.This option sets the time between each DRAM Thermal
detection once the Thermal activities.Options are 4min/8min/16min/32min.
Default is "16min".
System BIOS Protect
Enabled to protect system BIOS from overwritten.
Mainboard Manual
page 37
BIOS Setting
chapter 4:BIOS Setting

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:08:05 14:02:53-04:00
Create Date                     : 2002:08:05 14:02:39-04:00
Title                           : 845 SERIES MANUAL V2.0-ENGLISH.
Author                          : cad1
Creator                         : PScript5.dll Version 5.2
Producer                        : AFPL Ghostscript 7.0
Page Count                      : 14

EXIF Metadata provided by EXIF.tools