Zida Technologies MB-P845GL Motherboard User Manual 845 SERIES MANUAL V2 0 ENGLISH

Download:
Mirror Download [FCC.gov]
Document ID	263898
Application ID	Uf+afHLvlT4dohBc5+KgJw==
Document Description	manual 9 of 9
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.14kB (64276 bits)
Date Submitted	2002-08-16 00:00:00
Date Available	2002-08-06 00:00:00
Creation Date	2002-08-05 14:11:52
Producing Software	AFPL Ghostscript 7.0
Document Lastmod	2002-08-05 14:13:29
Document Title	845 SERIES MANUAL V2.0-ENGLISH.
Document Creator	PScript5.dll Version 5.2
Document Author:	cad1

chapter 5:Hardware Installation
Install Extended card.
6.
Connect with FDD cable,Harddisk cable,control signal line and so on.
7.
Clear CMOS
8.
Power is connected to Power supply(Only support P4 ATX power).
9.
Finish the setting of BIOS.
Hardware Installation
5.
page 50
Mainboard Manual
According to FCC Rule Parts 15.21 and 15.105(b), the following
statements should be placed in a prominent location of the
User’s Manual for this device.
NOTE : THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATION TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE :This equipment has been tested and found to comply with
the limits for a Class B digital device , pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio / TV technician for
help

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:08:05 14:13:29-04:00
Create Date                     : 2002:08:05 14:11:52-04:00
Title                           : 845 SERIES MANUAL V2.0-ENGLISH.
Author                          : cad1
Creator                         : PScript5.dll Version 5.2
Producer                        : AFPL Ghostscript 7.0
Page Count                      : 2

EXIF Metadata provided by EXIF.tools