Zida Technologies MB-P845GL Motherboard User Manual 845 SERIES MANUAL V2 0 ENGLISH
Zida Technologies Ltd. Motherboard 845 SERIES MANUAL V2 0 ENGLISH
Contents
manual 6 of 9
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 263590 |
| Application ID | Uf+afHLvlT4dohBc5+KgJw== |
| Document Description | manual 6 of 9 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 90.33kB (1129090 bits) |
| Date Submitted | 2002-08-15 00:00:00 |
| Date Available | 2002-08-06 00:00:00 |
| Creation Date | 2002-08-05 14:06:01 |
| Producing Software | AFPL Ghostscript 7.0 |
| Document Lastmod | 2002-08-05 14:09:39 |
| Document Title | 845 SERIES MANUAL V2.0-ENGLISH. |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | cad1 |
chapter 4:BIOS Setting 4.5 Integrated Peripherals On-Chip Primary PCI IDE Enabled / Disabled on-chip primary PCI IDE. Default setting is "Enabled". On-Chip Secondary PCI IDE Enabled / Disabled on-chip Secondary PCI IDE. Default setting is "Enabled". IDE Primary Master / Slave PIO IDE Secondary Master / Slave PIO Specify the IDE mode for the system. IDE Primary Master / Slave UDMA IDE Secondary Master / Slave UDMA Auto / Disabled IDE UDMA function feature. Default setting is "Auto", which lets BIOS determine. USB Controller Enabled / Disabled USB Controller. Default setting is "Enabled". USB Keyboard Support Enabled / Disabled USB Keyboard Support in DOS. Default setting is "Disabled" AC97 Audio Default setting is "Auto", BIOS will automatically detect onboard AC97 Audio. AC97 Modem Default setting is "Auto", BIOS will automatically detect onboard AC97 Modem. page 38 Mainboard Manual Onboard /CNR LAN selection Select "onboard" to enable the optional onboard LAN function.Selects "Ext.CNR " to disable onboard LAN function and uses LAN function on CNR card. Init Display First Default setting is "PCI Slot", sets Init Display First to PCI Slot. Onboard AC97 Control IDE HDD Block Mode Enabled / Disabled IDE HDD Block Mode. Default setting is "Enabled". Power On Function Specifies the keyboard hot key, mouse button, power button to wakeup the computer from S3-S5 state. Available options are Button only: Password, Hot key, Mouse left, Mouse right, Any key, keyboard 98. Default setting is Button only. KB Power On Password Sets Keyboard Power on Password. Hot Key Power On Sets power on Hot key. Default setting is "Ctrl-F1". On-board FDC Controller Enabled / Disabled on-board FDC controller. Default setting is "Enabled". Onboard Serial Port 1 & 2 Specify the I/O port addresses of serial port 1 and 2. Available settings are Aut o, Disabled, 3F8h, 2F8h, 3E8h and 2E8h. Default setting is "Auto". UART Mode Select Specifies the operation mode of onboard Serial Port 2. The onboard Serial Port 2 can be configured as an Infrared(IR) port or an ordinary RS-232 serial port. Available settings are Normal, IrDA and ASKIR. Default is "Normal". RxD,TxD Active Options are "Hi,Hi","Hi,Lo","Lo,Lo","Lo,Hi". IR Transmission Delay Enabled / Disabled IR Transmission Delay. UR2 Duplex Mode This option is not available when UART is set to "Normal". Available options are Half Duplex and Full Duplex. Default setting is "Half Duplex" Mainboard Manual page 39 BIOS Setting chapter 4:BIOS Setting chapter 4:BIOS Setting Use IR pins Setting IR mode.Default is IR_Rx2Tx2. Onboard Parallel Port Specifies the I/O port address of the onboard parallel port. Available settings are Auto, Disable, 378h, 278h and 3BCh. Default is "Auto". Parallel Port Mode Specifies the onboard parallel port mode. Available options are Normal, Bi-Dir, ECP and EPP. Default is "ECP". EPP Mode Select Specifies the Enhanced Parallel Port specification version number. This option only appears if the Parallel Port Mode is set to "EPP". The settings are 1.7 or 1. 9. Default is N/A because the default setting for the Parallel Port Mode option is not EPP. ECP Mode USE DMA This option only appears if the Parallel Port Mode option is set to ECP. It assigns a DMA channel to the onboard parallel port. Available settings are 1, 3. Default is "3". Game Port Address Specifies the Onboard Game Port I/O address. Available settings are 201, 209, and Disabled. Default is "201". Midi Port Address Specifies the I/O address of the MIDI interface on the Onboard Game Port. Available options are 300, 330 ,290 and Disabled. Default is "330". Midi Port IRQ Assigns the IRQ line to the MIDI interface. Available options are 5 and 10. Default setting is "10". This option is not available if the Onboard Midi Port is disabled S-232 serial port. page 40 Mainboard Manual chapter 4:BIOS Setting Power Management Setup ACPI Function Enabled/disabled ACPI Function. Default setting is "Disabled". ACPI Suspend Type Specifies ACPI Suspend type. Default setting is "S1(POS)" Power Management Specifies Power Management Mode. Default setting is "User Define". Video Off Method Specifies Video off Method. Default setting is "DPMS". Video Off In Suspend Specifies Video off in Suspend. Suspend Type Specifies Suspend Type. Default setting is "Stop Grant". Suspend Mode Specifies Suspend Mode. Default setting is "Disabled". HDD Power Down Specifies HDD Power Down Mode. Default setting is "Disabled". Soft Off by PWR_BTTN Sets Power Down Mode by PWR_BTTN. Default setting is "Instant-off". CPU THRM-Throttling Monitor CPU Temperature, slow down CPU Speed. Mainboard Manual page 41 BIOS Setting 4.6 chapter 4:BIOS Setting 4.7 PnP/PCI Configurations Reset configuration Data Enabled \ Disabled Reset configuration Data. Default setting is "Disabled". Resources Controlled by Sets the allocation of PCI resources. Available options are Manual and Auto (ESCD). Default setting is "Auto"(ESCD). BIOS automatically assigns resources. IRQ Resources When resources are controlled manually,assign each system interrupt a type, depending on the type of device using the interrupt. PCI/VGA Palette Snoop Enabled / Disabled PCI / VGA Palette Snoop, sets Enabled for having Video card on ISA Bus and VGA card on PCI Base, sets "Disabled" for VGA card only. page 42 Mainboard Manual chapter 4:BIOS Setting 4.8 PC Health Status Current System Temperature BIOS Setting Current CPU Temperature Detect System and CPU temperature automatically. System Fan Speed CPU Fan Speed Detect Fan Speed Status automatically. Vcore/VDDQ/VCC3-3/+5V/+12V/-12V Detect System Voltage status automatically. Mainboard Manual page 43 chapter 4:BIOS Setting 4.9 Frequency Control -9 CPU Clock Ratio Select CPU core/bus frequency ratio. This setting has no effect on processors with frequency ratio locked. Auto Detect PCI CLK Enabled \ Disabled Auto detect PCI CLOCK. Default setting is "Enabled". Spread Spectrum This option turns on/off the Spread Spectrum feature of clock generator to reduce Electromagnetic Interference (EMI) generated by high speed clock signals. Default setting is "Disabled". CPU Host/3V66/PCI Clock Select the clock generator of Front Side Bus frequency for CPU over-clocking. Default setting is "Default". page 44 Mainboard Manual chapter 4:BIOS Setting 4.10 Load Fail-safe Defaults Fail-safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. Load Optimized Defaults BIOS Setting 4.11 Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. Mainboard Manual page 45 chapter 4:BIOS Setting 4.12 Set Supervisor / User password -12 Set Supervisor When you select this function, the following message will appear at the center of the screen to assist you in creating a password. Type the password, up to eight characters and press. The new password will clear the previously entered password from CMOS Memory, you will be asked to confirm the Password. Type the password again and press < Enter>. To disable password,just press when you are prompted to enter password.A Message < >will appear to confirm the password being disabled.Once the password is disabled.the system will boot and you can enter setup freely. If you select "System" at "Security Option" in "Advanced BIOS Features" Menu, you will be prompted for the password every time.if you select "Setup" at " Security option" in"Advanced BIOS Feature" Menu,you will be prompted only when you try to enter Setup . page 46 Mainboard Manual chapter 4:BIOS Setting 4.13 Save & Exit Setup Type "Y"will quit the Setup Utility and Save the user setup value to RTC CMOS. Type "N" will return to Setup Utility. Exit Without Saving BIOS Setting 4.14 Type "Y" will quit the Setup Utility and Without Saving the User setup Value. Type "N" will return to Setup Utility. Mainboard Manual page 47
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2002:08:05 14:09:39-04:00 Create Date : 2002:08:05 14:06:01-04:00 Title : 845 SERIES MANUAL V2.0-ENGLISH. Author : cad1 Creator : PScript5.dll Version 5.2 Producer : AFPL Ghostscript 7.0 Page Count : 10EXIF Metadata provided by EXIF.tools