Zultys Technologies ZIP4X5 Bluetooth FHSS transceiver in VOIP Phone User Manual ZIP 4x4 User s Manual 1 0 2 20 April 2003

Zultys Technologies Bluetooth FHSS transceiver in VOIP Phone ZIP 4x4 User s Manual 1 0 2 20 April 2003

UserManual.wiki >

Zultys Technologies >

ZIP4X5 User Manual >

Contents

Manual 1

ZIP4x5Manual Part Number 90-18400User’s ManualZultys Technologies771 Vaqueros AvenueSunnyvale CA 94085-5327USA+1-408-328-0450http://www.zultys.com

iContentsChapter 1 Introduction 11.1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.1 Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.2 Installation and Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.3 What this Manual Includes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.1.4 What this Manual Does Not Include . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2.1 Switch Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.2.2 Display Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.2.3 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.2.4 Instruction Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.4 Documentation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.4.1 Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.4.2 Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.4.3 Special Paragraph Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.5 Forms of Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.6 Colophon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.7 Documentation Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Chapter 2 Warranty, Service, and Support 92.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92.2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92.2.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92.2.2 Products Sold in the USA to USA Customers . . . . . . . . . . . . . . . . . . . . 92.2.3 Extended Warranty for Products Sold in the USA to USA Customers 112.2.4 Products Sold Outside of the USA . . . . . . . . . . . . . . . . . . . . . . . . . . . 112.2.5 Repairs to the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112.3 Software License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122.4 Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122.5 Software Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132.5.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ii ZIP4x5 User’s Manual 2.5.2 Released and Pre-Released Software . . . . . . . . . . . . . . . . . . . . . . . . . 132.5.3 Software Subscriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132.6 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142.6.1 Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142.6.2 Contacting your Reseller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142.6.3 Using Zultys’ Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Chapter 3 Receiving the ZIP4x5 173.1 Initial Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173.2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173.2.1 Verify Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173.2.2 Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173.2.3 Items Included with Each Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183.3 In Case of Damage or Malfunction. . . . . . . . . . . . . . . . . . . . . . . . . 183.4 Returning Items for Repair or Replacement . . . . . . . . . . . . . . . . . 183.4.1 Warranty Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183.4.2 Obtaining RMA Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183.4.3 Describing the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193.4.4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193.4.5 Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193.4.6 Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193.4.7 Correspondence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Chapter 4 Installation 214.1 Regulatory Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214.2 Preparing the ZIP4x5 for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224.2.1 Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224.2.2 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224.2.3 Wall or Desk Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234.2.4 Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234.2.5 Connecting a Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254.3 Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264.3.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264.3.2 Initial Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274.3.3 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274.3.4 Running a Quick Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284.3.5 Communicating with the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Contentsiii4.3.6 Satisfactory Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Chapter 5 Provisioning the Phone 375.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375.1.1 Summary of Boot Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375.1.2 DHCP Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375.2 Configuration Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385.3 Web Interface Configuration Utility . . . . . . . . . . . . . . . . . . . . . . . . 415.4 Updating Software on the ZIP4x5 . . . . . . . . . . . . . . . . . . . . . . . . . 415.4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415.4.2 Specific Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415.4.3 Binary File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425.4.4 Ladder Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425.4.5 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Chapter 6 Interacting with the Phone 476.1 Call Appearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476.2 Using the Keypad and the Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 476.2.1 Description of Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476.2.2 Description of Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506.3 Basics of Display Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . 506.3.1 Idle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506.3.2 Incoming Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516.3.3 Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516.4 Data Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Chapter 7 Special Functions 557.1 Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557.1.1 Voice Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557.1.2 Instant Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557.2 Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557.2.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557.2.2 Individual Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567.2.3 Holding, Parking, Transferring, and Forwarding Calls . . . . . . . . . . . . 59

iv ZIP4x5 User’s Manual 7.2.4 Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 597.3 User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607.3.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607.3.2 Log In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 617.3.3 Log Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627.3.4 Log Into ACD or Operator Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627.3.5 Agents Operating Without a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637.3.6 Log Out of ACD or Operator Group . . . . . . . . . . . . . . . . . . . . . . . . . . 637.4 Do Not Disturb (DND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 647.5 Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657.5.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657.5.2 Unconditional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657.5.3 On No Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657.5.4 When Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657.5.5 Configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667.6 Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667.6.1 Individual Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 677.6.2 Failure to Park an Individual Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 677.6.3 Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 687.6.4 Failure to Park a Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 687.7 Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 687.7.1 Individual Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 697.7.2 Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 697.8 Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 707.9 Error Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Chapter 8 Firewalls, NATs, and VPNs 738.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 738.2 Enabling Remote Network Support . . . . . . . . . . . . . . . . . . . . . . . . 748.2.1 Network Mode Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 748.2.2 Setting the Network Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 758.3 WAN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 778.3.1 DHCP Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 778.3.2 PPPoE Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 798.3.3 Fixed Address Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 808.4 LAN Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 818.4.1 Setting the IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Contentsv8.4.2 Configuring the ZIP4x5 as a DHCP Server . . . . . . . . . . . . . . . . . . . . 818.5 Firewall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848.5.1 Component Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 858.5.2 Setting Up Firewalls through a Configuration File . . . . . . . . . . . . . . . 858.5.3 Setting the Firewalls through the Web Interface . . . . . . . . . . . . . . . . . 878.6 Static Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 878.6.1 Setting Up Static Routes through a Configuration File . . . . . . . . . . . . 888.6.2 Setting the Firewalls through the Web Interface . . . . . . . . . . . . . . . . . 888.7 Virtual Private Networks (VPN). . . . . . . . . . . . . . . . . . . . . . . . . . . . 898.7.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 898.7.2 Establishing a VPN using AutoKey IKE . . . . . . . . . . . . . . . . . . . . . . . 908.7.3 Establishing a VPN using Manual Keys . . . . . . . . . . . . . . . . . . . . . . . 918.7.4 Setting Up VPNs through a Configuration File . . . . . . . . . . . . . . . . . 928.7.5 Establishing a VPN through the Web Interface . . . . . . . . . . . . . . . . . 93Chapter 9 Using the Phone 979.1 Going Off Hook and On Hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 979.1.1 Using the Handset, Headset, and Speaker . . . . . . . . . . . . . . . . . . . . . . 979.1.2 Off Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 989.1.3 On Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 989.1.4 Switching Between the Handset, Headset, and Speaker . . . . . . . . . 989.1.5 Disconnecting the Handset or Headset . . . . . . . . . . . . . . . . . . . . . . . . 989.2 Making a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 999.2.1 Dialling a Number After You Get Dial Tone . . . . . . . . . . . . . . . . . . . 999.2.2 Dialling a Number without Dial Tone . . . . . . . . . . . . . . . . . . . . . . . . 1019.2.3 Sending a # as Part of the Number . . . . . . . . . . . . . . . . . . . . . . . . . . 1019.2.4 Dialling When in Calculator Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 1019.2.5 Making a Call While Accessing the Menu . . . . . . . . . . . . . . . . . . . . 1029.2.6 Dialling Using a SIP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1029.2.7 Editing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1049.2.8 Dialling an Invalid Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059.2.9 Making a Call Without a SIP Proxy . . . . . . . . . . . . . . . . . . . . . . . . . 1059.3 Call Proceeding and Call Answered . . . . . . . . . . . . . . . . . . . . . . 1069.3.1 Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1069.3.2 Ringback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1079.3.3 Far End Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1089.3.4 Network Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1089.3.5 Call Answered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1099.3.6 Network Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

vi ZIP4x5 User’s Manual 9.4 Receiving a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1119.4.1 Alerting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1119.4.2 Before You Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1119.4.3 Receiving Multiple Calls and Call Waiting . . . . . . . . . . . . . . . . . . . . 1129.4.4 Rejecting the Call or Not Answering . . . . . . . . . . . . . . . . . . . . . . . . 1149.4.5 Answering the Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1149.4.6 Receiving a Call While Accessing the Menu . . . . . . . . . . . . . . . . . . 1159.5 During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1159.5.1 Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1159.5.2 Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1169.5.3 Transferring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1189.5.4 Transferred by the Other Party . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1209.5.5 Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1209.6 Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1209.6.1 You Terminate the Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1209.6.2 Other Party Terminates the Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1219.7 Quick Ways to Dial a Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1219.7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1219.7.2 Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1219.7.3 Dialling by Memory Location in the Phone Book . . . . . . . . . . . . . . 1229.7.4 Dialling by Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1239.7.5 Dialling a Recent Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1249.7.6 Voice Activated Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1259.8 Conference Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1269.8.1 Initiating a Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1269.8.2 Placing a Conference Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . 1279.8.3 Resuming a Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1279.8.4 Muting a Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1289.8.5 Adding Another Person to the Conference . . . . . . . . . . . . . . . . . . . . 1289.8.6 Terminating a Conference Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1299.9 Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1309.9.1 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1309.9.2 Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1309.9.3 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1309.9.4 Order of Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1319.9.5 Divide by Zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1319.9.6 Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1319.9.7 Clearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1319.9.8 Exiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1329.9.9 Making and Answering a Call While in Calculator Mode . . . . . . . . 132

ContentsviiChapter 10 The Menu 13310.1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13310.2Menu | Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13310.2.1 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13410.2.2 Add New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13510.2.3 Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13710.2.4 Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13810.3Menu | Instant Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13910.3.1 Compose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13910.3.2 Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14010.3.3 Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14110.3.4 Erase all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14210.3.5 Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14210.4Menu | Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14210.4.1 Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14210.4.2 Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14310.4.3 Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14410.4.4 Manufacture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14510.5Menu | User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14610.5.1 LCD Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14710.5.2 Greeting Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14710.5.3 Clear User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14810.5.4 Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14810.5.5 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14910.5.6 Event Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15510.5.7 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15510.5.8 Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15710.5.9 Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15910.5.10Regional Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16010.5.11Emergency Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16310.5.12Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16410.6Menu | Protected Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16410.6.1 Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16510.6.2 IP Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16610.6.3 SIP Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16910.6.4 VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17310.6.5 Names and Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17610.6.6 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17810.7Menu | Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18010.7.1 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18010.7.2 Ping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

viii ZIP4x5 User’s Manual 10.7.3 Loop Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18210.7.4 Buttons and Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18310.7.5 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18410.7.6 LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18510.7.7 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18610.7.8 Audio Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187Appendix A Menu Structure 189Appendix B LED Summary 193B.1 Call Appearance Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193B.1.1 Message and Encrypt Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194B.1.2 Hook and User Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194B.1.3 DND and Forward Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194B.1.4 Memory and Calculator Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194B.1.5 Park and Pickup Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195B.1.6 Mute and Page Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195B.1.7 Speaker Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195Appendix C Configuration Files 197C.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197C.2 Configuration File Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197C.2.1 Common Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197C.2.2 Specific Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198C.3 Configuration File Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198C.3.1 File Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198C.3.2 Parameter Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199C.4 Configuration Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199C.4.1 Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199C.4.2 SIP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203C.4.3 Firewall Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207C.4.4 Hardware Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211C.4.5 VLAN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212C.4.6 Audio Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215C.4.7 DHCP Server Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218C.4.8 Bluetooth Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219C.4.9 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

ContentsixAppendix D Web Interface Configuration Utility 225D.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225D.1.1 Accessing the Download and Configuration Utility . . . . . . . . . . . . . 225D.1.2 Interface Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225D.2 Home panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225D.3 Phone Book Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226D.3.1 Add Entry panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226D.3.2 Edit panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227D.3.3 Delete panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227D.4 Information Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227D.4.1 Times Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228D.4.2 Communications Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229D.4.3 Manufacture Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230D.4.4 Logs Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230D.5 User Settings Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231D.5.1 General panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231D.5.2 Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233D.5.3 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233D.5.4 Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235D.5.5 Factory Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236D.6 Protected Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236D.6.1 Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237D.6.2 Network Setup – Normal Network Mode . . . . . . . . . . . . . . . . . . . . . 238D.6.3 Network Setup – Remote Network Mode . . . . . . . . . . . . . . . . . . . . . 241D.6.4 SIP Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249D.6.5 Names and Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251D.6.6 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252Appendix E Acronyms 255Index 257

x ZIP4x5 User’s Manual

1 Chapter 1Introduction1.1 Scope1.1.1 AudienceThis manual is intended for networking engineers and network administrators who need toinstall, maintain, support, and use the ZIP4x5. The manual can also be used by engineers thatwant to make a phone system compatible with the ZIP4x5. The manual assumes you are familiarwith networking and telephony principles and practices.If you are using the ZIP4x5 with the MX250 or the MX1200, you should read this manual inconjunction with the MX Administrator User’s Manual.1 That manual describes how certainfeatures of the phone interact with the enterprise media exchange. You can obtain that manual online at one of these web sites:http://www.MX250.comhttp://www.MX1200.comThis manual on the ZIP4x5 can be used by a user who wants to understand in detail how featuresand functions of the phone operate. End users who do not need the depth of informationcontained in this manual (which is about 150 pages) should refer to the ZIP4x5 User’s Guide(which is 12 pages). One guide is shipped with each phone, but you can download the guide fromthe ZIP4x5 web site at:http://www.zip4x5.com1.1.2 Installation and UseUnpack the ZIP4x5 and verify the contents as described in section 3.2 on page 17. Install theproduct as described in chapter 4, starting on page 21.1.1.3 What this Manual IncludesThis manual provides detailed information and instructions on the complete installation andoperation of the ZIP4x5 IP phone.1. The MX250 and MX1200 are Enterprise Media Exchanges. They are manufactured by Zultys and provide the commu-nications needs of an enterprise by integrating voice, data, video, and fax.

2ZIP4x5 User’s Manual1.1.4 What this Manual Does Not IncludeThis manual does not provide technology details, pricing, names of sales representatives, ornames of distribution channels. Access the Zultys web site for this information:http://www.Zultys.com1.2 FeaturesThe ZIP4x5 is a SIP based IP phone with a large number of features. The top of the phone isshown in figure 1-1 and the bottom of the phone in figure 1-2. The phone is referred to as a “fourby five” because it has four call appearances and five circuits – four Ethernet circuits and oneanalog circuit. Key features of the phone are:•four virtual lines support four simultaneous calls•headset, handset, and speaker modes•acoustic echo cancellation in speaker mode provides high quality speaker phoneFigure 1-1 Top View of ZIP4x5

1. Introduction3•four 10/100Base-T Ethernet circuits to connect to the LAN and three additional devices such asa desktop PC, a notebook PC, and another accessory•one analog circuit to connect to the PSTN•supports all commonly used PBX functions when used in conjunction with an appropriate callcontrol system•supports IEEE 802.1q VLAN tagging and IEEE 802.1p priority marking so it can be used withany switch•receives power over Ethernet (IEEE 802.3af) or from ac adapter•speech encryption ensures that your calls can be kept secure•easy to create conferences with three to five people, including those who call you•35 buttons (11 with LEDs) give significant ease of use•3 line x 20 character display is easy to read (5 mm high characters)•uses standard SIP messages to interface to a variety of call managers from variousmanufacturers•dial by number or SIP address•built in switch can forward traffic at line speeds and supports QoS and VLAN tagging•complete calculator functionFigure 1-2 Bottom View of ZIP4x5

4ZIP4x5 User’s Manual•hot key dialling•voice activated dialling•firewall, NAT, VPN, and DHCP server functions•STUN protocol support•PPPoE support for connecting to WAN•Bluetooth support for wireless headsets•browser and TFTP support for configuring and updates•critical operational parameters are protected by password•100 memory phone book plus 64 location memory for last numbers received or dialled•based on highly stable Linux operating system1.2.1 Switch FunctionalityThe phone uses an Ethernet switch (not a hub) to connect the three accessory ports and the phoneitself to the LAN. Therefore, the ZIP4x5 can control the QoS to ensure that voice packets alwayshave priority. Further, when the phone is not in use, the ZIP4x5 supports wire speed switchingbetween the LAN (network) and the accessory ports. A conceptual picture of the switch is shownin figure 1-3.Figure 1-3 Internal Representation of the Managed Switch

1. Introduction5You can put the phone and the accessory ports on different VLANs (802.1q – see section 10.6.4 onpage 173 for details).The inclusion of the switch inside the phone allows you to take a single Ethernet circuit from thewiring closet to the desktop. If you are connecting multiple users and not computers, you can usethis internal switch to make connections to other phones. You can connect phones two layersdeep with this arrangement to minimize the number of switch ports required in the wiring closet.1.2.2 Display DescriptionThe display is a graphical LCD, 160 dots by 32 dots. It is used mostly to display characters, 20columns by 3 rows. You can tilt the display so that it is facing you. Pull the back of the display unitand swing it up and towards the front of the phone, as shown in figure 1-4.You can adjust the contrast of the display as described in section 10.5.1 on page 147.1.2.3 LEDsThe phone has eight bi-color LEDs and three red LEDs. The bi-color LEDs can be off, or show red,green, or orange. These LEDs are on the four call buttons and the four buttons immediately abovethem. The red LEDs are on the speaker key, the mute button, and the park button.1.2.4 Instruction CardThe phone has an instruction card on the bottom. Slide out the card using the tab to see briefinstructions on how to use the phone.Figure 1-4 Showing how you can tilt the LCD for better viewing

6ZIP4x5 User’s Manual1.3 Ordering InformationFigure 1-5 shows the Zultys ordering numbers for the ZIP4x5.1.4 Documentation Overview1.4.1 OrganizationThis user’s manual describes:•how to install the ZIP4x5•how to provision the phone for use within the network•how to make and receive calls•how to access the features of the phone•how to customize the phone to suit your preferences•what to do when you are convinced there is a problem1.4.2 Nomenclature1.4.2.1 AcronymsThis manual often uses acronyms specific to the industry of telecommunications and datacommunications. Because the sections (and, to a certain extent, the subsections) can be read in anysequence, acronyms are not defined in the text. For a complete list of acronyms used in thismanual, see Appendix D, starting on page 255.Zultys Part Description90-05400 White ZIP4x5, with ac power supply for N. America, Taiwan, and Japan90-05401 White ZIP4x5, with ac power supply for UK and Hong Kong90-05402 White ZIP4x5, with ac power supply for continental Europe (Schuko plug)90-05403 White ZIP4x5, with ac power supply for Australia and New Zealand90-05404 White ZIP4x5, with ac power supply for Israel90-05410 White ZIP4x5, without ac power supply90-05420 Black ZIP4x5, with ac power supply for N. America, Taiwan, and Japan90-05421 Black ZIP4x5, with ac power supply for UK and Hong Kong90-05422 Black ZIP4x5, with ac power supply for continental Europe (Schuko plug)90-05423 Black ZIP4x5, with ac power supply for Australia and New Zealand90-05424 Black ZIP4x5, with ac power supply for Israel90-05430 Black ZIP4x5, without ac power supplyFigure 1-5 Ordering Numbers for the ZIP4x5

1. Introduction71.4.2.2 JargonThis manual often uses technical terms specific to the industry of telecommunications and datacommunications. Very specialized terms are sparsely used, and their meanings are clearlyexplained where they are used.1.4.3 Special Paragraph StylesThe following are the notices that are used to attract special attention to certain items. They settext off from the main body of the manual. These notices also appear in other languages whererequired by certain regulatory bodies:Important This notice contains special information that should not be ignored.Caution This notice calls attention to a condition or procedure which, if not observed, couldresult in damage to the ZIP4x5 or the loss of data.Warning This notice indicates that if a specific procedure or practice is not correctlyfollowed, permanent damage to the ZIP4x5 and personal injury may result.Danger This notice warns you of imminent hazard to yourself and others if properprocedures are not followed.1.5 Forms of DocumentationThis manual is updated with each major release of the software. The manual describes thefeatures in that release of the software.Between major releases of software, Zultys may issue one or more minor releases of software.These minor releases may have more capabilities than the current formal release. The features inthat software (and the user interfaces to support those features) may or may not be described inthis manual.This manual is available only in PDF format. You can download the PDF file from the ZIP4x5 website at:http://www.zip4x5.comYou can obtain old versions of the manual that may describe the software that you have or thelatest manual that describes all the latest features of the product. You can identify the version ofthe manual from the title page, opposite the table of contents (page 2 of the PDF file).When you use the PDF file, you can click on any reference in the text. This powerful featureallows you to follow the references in the text very easily. Using Acrobat, you can then return tothe page you were previously reading. This is a huge benefit to you if you want to study a smallarea of the product.

8ZIP4x5 User’s Manual1.6 ColophonThis document was produced on personal computers using Adobe’s FrameMaker for Windows.The printed book is printed by an offset process.The headings are set in Swiss 721, Bitstream’s version of the Helvetica™ typeface; the copy is setin Zapf Calligraphic, Bitstream’s version of the Palatino™ typeface; notices are set in Swiss 721 orNews Gothic, Bitstream’s version of the Kingsley-ATF Type Corporation typeface. The drawingswere produced using Adobe Photoshop, Adobe Illustrator, and Microsoft Visio.1.7 Documentation FeedbackZultys appreciates any constructive feedback on all our documentation. If you have comments orerror reports on any Zultys documentation, please submit your feedback to:Technical Publications DepartmentZultys Technologies771 Vaqueros AvenueSunnyvale, California 94085 USAtechpubs@Zultys.com

9Chapter 2Warranty, Service, and Support2.1 IntroductionZultys wants you to get the most out of the product you have purchased. To that end, we offeryou:•hardware warranty (for failure of the hardware)•software subscription (to update the phone)•technical support (in case of difficulty)•training (to learn the phone)Zultys makes each of these available to you under different terms and conditions. This chapterdescribes what is offered and the conditions of the coverage.2.2 Warranty2.2.1 GeneralZultys Technologies (Zultys) provides a warranty to the purchaser of its products as outlinedbelow. In the USA, the purchaser is the end user. For international sales, the purchaser is Zultys’distributor, who has sold you, the end user, the product.2.2.2 Products Sold in the USA to USA CustomersThis section represents Zultys’ standard warranty at the time that this manual was produced.These terms apply to sales made in the USA to USA customers.2.2.2.1 Products Covered and Period1. Zultys hardware products are warranted against defects in material and workmanship. IfZultys receives notice of such defects during the warranty period, Zultys shall at its optioneither repair or replace hardware products that prove to be defective. Some newlymanufactured products purchased may contain selected re-manufactured parts equivalentto new in performance.

10ZIP4x5 User’s Manual2. Zultys software and firmware products which are designated by Zultys for use with ahardware product, when properly installed on that hardware product, are warranted not tofail to execute their programming instructions due to defects in materials and workmanship.If Zultys receives notice of such defects during the warranty period, Zultys shall repair orreplace software media and firmware which do not execute their programming instructionsdue to such defects. Zultys does not warrant that the software, firmware, or hardware willmeet your requirements or that their operation shall be uninterrupted or error free.3. If Zultys is unable, within a reasonable time, to repair or replace any product to a conditionas warranted, Buyer shall be entitled to a refund of the purchase price upon return of theproduct to Zultys.2.2.2.2 Supplemental StatementsSupplemental statements setting forth the duration and implementation of warranty andinstallation applicable to purchased products are incorporated herein.2.2.2.3 Duration and Commencement of Warranty PeriodUnless otherwise agreed to in writing, the warranty period is one year. The warranty periodbegins on the date you received the product.2.2.2.4 Confirmation of Delivery DateIf you request warranty, Zultys may require proof of your date of purchase of the system. You willneed to provide Zultys with a copy of your invoice showing the date that you bought the productand the name and address of the distributor that sold you the product. Zultys will not ask you forthis information if you bought the product directly from Zultys.2.2.2.5 Obtaining Warranty ServiceFor warranty service or repair, this product must be returned to a service facility designated byZultys. Zultys may repair on-site at the option of the Buyer. The Buyer is then responsible fortravel charges and applicable additional expenses for such services.Buyer shall prepay shipping charges to Zultys and Zultys shall pay shipping charges to return theproduct to Buyer. However, Buyer shall pay all shipping charges, duties, and taxes for productsreturned to Zultys from another country.2.2.2.6 Limitation of Warranty1. The foregoing warranty shall apply only when:•The product has not been abused, misused, or improperly or inadequately maintained bythe Buyer; and•The defect has not been caused by normal wear and tear; and•The defect is not the result of voltage surges or brownouts, lightning, water damage orflooding, fire, explosion, earthquakes, tornadoes, acts of aggression or war, or by anysimilar phenomenon; and

2. Warranty, Service, and Support 11•All interconnected software or hardware has been either supplied by Zultys or approvedfor use by Zultys in writing prior to its use; and•There has been no unauthorized modification of the product; and•The product has not been operated outside of the environmental or other specifications;and•There was proper site preparation, installation, and maintenance; and•The defect is reported by the original purchaser of the product.2. Zultys assumes no responsibility for the use or reliability of interconnected equipment thatis not furnished by Zultys.3. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY,WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. ZULTYS SPECIFICALLYDISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE.2.2.3 Extended Warranty for Products Sold in the USA to USA CustomersYou can extend your warranty for additional periods, each of two years. The price for thisextension is different depending on whether you purchase the extended warranty at the time youplace your order for the system, during a period of coverage, or at a time when you no longerhave coverage. Contact your Zultys sales representative for current pricing.2.2.4 Products Sold Outside of the USAIf you have purchased your product from a distributor of Zultys’ products outside the USA, thatdistributor provides you with warranty on the product. The terms of the warranty under whichyour product was purchased may differ from the terms in section 2.2.2 on page 9. Zultys requiresthat its distributors provide warranty terms to you that are similar to the terms outlined in thissection, and that comply with the local laws and expectations of the country in which you reside.Contact your Zultys sales representative for the details of the warranty that covers your product.2.2.5 Repairs to the Hardware2.2.5.1 VerificationIf you believe that hardware on your the ZIP4x5 is faulty, contact your Zultys sales or servicerepresentative. In the USA, you may need to contact Zultys’ technical support to confirm that theequipment is faulty. Follow the procedures in section 2.6.3 on page 15 before calling.If Zultys’ sales or service representative determines that there may be a problem with yourhardware, you will be issued an RMA number.2.2.5.2 Warranty RepairsIf your hardware is covered under a warranty, see section 2.2 on page 9 for details of the terms ofthe repair.

12ZIP4x5 User’s Manual2.2.5.3 Out of Warranty RepairsIf the phone is no longer covered by warranty, and if you do not have a maintenance contract,you will have to pay for the repairs. Contact your Zultys sales or service representative to obtainthe current repair prices and payment terms. Outside the USA, contact the distributor responsiblefor your territory.2.2.5.4 Returning to ZultysSee section 3.4.6 on page 19 for details on returning equipment to Zultys.2.3 Software License AgreementWhen you obtain software updates from Zultys for your ZIP4x5, you agree to be bound by theterms of this license agreement. This agreement is between you and Zultys.Zultys licenses and copyrights software and documentation, whether supplied on printed mediaor electronic media. Such software and documentation is the intellectual property of Zultys, andis hereinafter referred to as Licensed Materials. Title to Licensed Materials shall remain withZultys. Software in this context refers to code that executes on your PC, and software, firmware,FPGA code, and DSP code that execute within the ZIP4x5.You shall not copy Licensed Materials, except for archive purposes, to replace a defective copy, orfor verification of program errors.For Licensed Materials that are supplied to you, the word purchase or similar or derivative wordsused in this manual or on any purchase order is understood to mean License, and purchaser,customer, or similar or derivative words is understood to mean Licensee.You agree not to reverse engineer, reverse assemble, reverse compile, sublicense, rent, lease,disclose, or assign Licensed Materials and to not use, copy, modify, merge, or transfer copies ofLicensed Materials, except as provide herein.Zultys grants you a non-transferable and non-exclusive right to use its Licensed Materials tooperate the ZIP4x5 hardware. You may install the ZIP4x5 software on an unlimited number ofcomputers at the facility or premises where the ZIP4x5 hardware is located.If you transfer the ZIP4x5 hardware, you agree to destroy all copies of Licensed Materials,together with any archive copy thereof, at the facility or premises where the ZIP4x5 hardwarehad been located.You agree to treat updates to the ZIP4x5 product the same as other Licensed Materials under thisagreement.2.4 TrainingZultys offers training at its facility in California. Contact your Zultys sales representative forcurrent pricing. If you have purchased your the ZIP4x5 from a distributor located either withinor outside the USA, contact your distributor about equivalent services that they may offer locally.Training is not included in the purchase price of your system, and you must pay for these services(and any applicable travel expenses) separately.

2. Warranty, Service, and Support 13The training at Zultys's facility is a two day course. The purpose of the course is to teach you howto use the ZIP4x5, so that you can leave the classroom and apply your knowledge to your specificdeployment of the product. The course teaches you about installation, provisioning, systemadministration, and maintenance.2.5 Software Updates2.5.1 GeneralThe majority of features in the ZIP4x5 are provided by software. Newer versions of the softwaremay contain more features.You can identify the version of the software from the menu (described in chapter 10.4.4, startingon page 145), under Information.Zultys posts versions of its software on its web site at:http://www.zultys.comThe information on the web site tells you what new features are included in the latest softwarerelease.2.5.2 Released and Pre-Released SoftwareReleased software has been fully tested by Zultys and by selected customers of Zultys. When youtake delivery of an the ZIP4x5, you receive the latest released software. Zultys issues a newrelease of software about once a year.Pre-released software has been partially tested. Zultys distributes this software to support newfeatures or functions requested by customers. Pre-releases may also contain fixes to some knownbugs. Zultys may distribute dozens of versions of pre-released software between formal releases.However, Zultys restricts the circulation of these pre-released versions. When you usepre-released software, you are acknowledging that Zultys has not fully tested the softwareversion.If you have chosen to install pre-release software on your phone, you should do so only if youthink that the use of the increased features outweigh the risks associated with using software thathas not been fully tested. Zultys documents the new or enhanced features in the updated versionof this manual, and does not usually make printed documentation immediately available.2.5.3 Software SubscriptionsYou may need to purchase a software subscription separately from your purchase of the product.When you buy a subscription, it covers your ZIP4x5 for a period of one year. The softwaresubscription entitles you to software updates that may include new or enhanced features,problem fixes, or both. Zultys alone will determine in what way a new release is different from anolder release. Zultys alone will determine the number of such updates that it will distributeduring any twelve-month period, including none. However, Zultys usually offers one formalrelease within a twelve-month period.

14ZIP4x5 User’s ManualWhen you have a current software subscription for your the ZIP4x5, you are entitled to downloadsoftware from the web site. All software that is posted on Zultys’ web site requires a passwordbefore you can install it on your system. Zultys supplies you with the password when youpurchase a subscription. The password expires at the end of the subscription period unless yourenew the subscription.Zultys may determine that some functions of the ZIP4x5 will be sold separately as softwarelicenses. If you have purchased software licenses, the software subscription includes updates tothose software options.The price for the software subscription is different depending on whether you purchase thesubscription at the time you place an order for the system, during a period of coverage, or at atime when you no longer have coverage. Contact your Zultys sales representative for currentpricing.The software subscription (or an extension of software subscription) applies to an individualphone. If you have more than one ZIP4x5, and you wish to operate all phones on the latestsoftware, you should have a current subscription for each system. You may not update thesoftware on those phones for which the software subscription has expired.As of the time of writing this manual, Zultys has determined that all software updates for theZIP4x5 are currently available at no charge. You should check the ZIP4x5 web site periodically ifyou are interested in software updates. Zultys reserves the right to charge for software updatesat a future date.2.6 Support2.6.1 ResourcesThis section suggests ways to save yourself time by checking for answers yourself and ruling outcommon problems.If you have a question about the way the ZIP4x5 works, the best way to get an accurate,immediate answer is to try one or all of these approaches first.•Review the User’s Guide for the ZIP4x5.•Check the index or table of contents of this manual for the topic you need.•See the ZIP4x5 technical support information and FAQ pages on the ZIP4x5 web site:http://www.zip4x5.comIf you take these steps and still cannot find the answer, contact your sales representative,distributor, or Zultys.2.6.2 Contacting your ResellerIf you brought your product from a reseller and not directly from Zultys, you should contact themfirst about questions related to the product. The reseller that sold the product to you has chargedyou money for this support and you should therefore expect that they will assist you.Often, a reseller will provide you a maintenance contract as part of your purchase, so that thereseller will support you for a period of time after you receive the product. Verify with yourpurchasing department to see if you have a support contract for your ZIP4x5.

2. Warranty, Service, and Support 15If the reseller is unable or unwilling to assist you, or if you bought the product directly fromZultys, you should contact Zultys’ technical support directly.2.6.3 Using Zultys’ Technical SupportZultys provides you with 30 days free technical support with the purchase of a phone. The periodof technical support starts on the first day that you make a call to technical support and ends onthe 30th calendar day from the first time that you called.Zultys generally ceases to support old versions of the software six months after a new release isavailable. If the software subscription for your phone has expired, or you have not upgraded yourphone to the latest software release after six months of the release date, Zultys’ technical supportmay not be able to assist you.2.6.3.1 Technical Support by E-MailOften, Zultys's technical support will need to know exactly how your phone is configured. Youshould send this information to Zultys’ technical support using e-mail to:support@Zultys.comIf possible, Zultys’ technical support will resolve your problem efficiently by e-mail. If theproblem cannot be resolved by e-mail, Zultys’ technical support will call you or wait for you tocall them.2.6.3.2 Calling Technical SupportBe prepared when you call. When you call to speak to Zultys's technical support, you will get animmediate resolution to your problem if you are ready with certain types of information:1. Send details of your configuration in advance of calling. Allow Zultys’ technical support atleast four hours to review your e-mail. In your e-mail, state what it is that you think is wrong.2. When you call, ensure you have your ZIP4x5 close by.3. Ensure that your surrounding area is quiet, and that you can hear the technical supportperson.4. Zultys’ technical support can assist you best if you are ready to describe the sequence thatled to the problem.5. Know exactly what you did before the problem occurred, and the exact wording of anymessage appearing on the LCD.6. Have a pen or pencil and paper ready to take notes.2.6.3.3 Support vs. TrainingThe ZIP4x5 is an advanced phone that requires detailed technical knowledge of datacommunications and telecommunications to configure. It is easy for you to modify parameters sothat the ZIP4x5 does not behave in the manner that you expect.The onus is on you, the system administrator, to configure the ZIP4x5 the way you want it. Zultys’technical support is not a substitute for training or commissioning. If you need training on theproduct, join one of Zultys’ training courses (see section 2.4 on page 12 for details). Use Zultys’technical support to solve problems that you have tried diligently to solve by yourself.

16ZIP4x5 User’s ManualYou may contact Zultys’ technical support at the following number. You must pay for any phonecharges:+1-408-328-0450

17Chapter 3Receiving the ZIP4x53.1 Initial InspectionWhen the shipment of your ZIP4x5 arrives, inspect the shipping boxes for external damages andrecord any discrepancies. Save the boxes and packing material in case you need to ship the phoneto another facility. Always retain the packing materials if you suspect that the shipment isdamaged — the carrier may need to inspect them. Warning Do not attempt to use the ZIP4x5 or its accessories if it or they appear damaged.3.2 Package Contents3.2.1 Verify ContentsUpon delivery of your products, inspect the packing list, and confirm that all items listed on thatnote were received. Compare the packing slip with your purchase order.Ensure that there are no discrepancies and then install the ZIP4x5 as described in chapter 4,starting on page 21.Important If you suspect that there are discrepancies or that the equipment is not fullyfunctional, contact Zultys or your Zultys sales representative immediately.Retain all packing materials and the shipping note for Zultys or its representativeto inspect. ZULTYS CANNOT BE HELD RESPONSIBLE IF YOU CLAIM THATAN ITEM IS MISSING, AND YOU HAVE NOT INFORMED ZULTYS WITHINTHREE DAYS OF RECEIPT, OR IF YOU HAVE NOT RETAINED ALL PACKINGMATERIALS FOR INSPECTION.3.2.2 Serial NumbersVerify the serial numbers of each item and compare them with the serial numbers on the packinglists. The serial number of the ZIP4x5 is a twelve character digit alphanumeric code printed on awhite barcode label.

18ZIP4x5 User’s Manual3.2.3 Items Included with Each PhoneCarefully open the box that contains the ZIP4x5 and verify you have the following items:•phone body•instruction card under the phone body•handset and handset cord•headset•ac adapter for your country (optional)•Ethernet cord•User’s Guide3.3 In Case of Damage or MalfunctionNotify your Zultys sales or service representative under any of the following conditions:•the shipping container or any of the contents appear damaged•an item is missing•there is a discrepancy between the packing slip and the equipment received•the equipment does not function correctlyYour local Zultys sales representative will arrange for repair or replacement, at Zultys’s discretion.In certain cases, Zultys may require a claim settlement.3.4 Returning Items for Repair or Replacement3.4.1 Warranty CoverageBefore returning merchandise to Zultys for repair or replacement, you must ensure that the itemsare under warranty. Read chapter 2, starting on page 9, for details on the warranty of Zultys’sproducts. If you are unsure about the warranty of your merchandise, call your local Zultys salesrepresentative for clarification. You must obtain an RMA before returning any merchandise fromZultys; this includes equipment covered under warranty.For merchandise not under warranty, Zultys offers extended warranty. Call your local Zultyssales representative for pricing on extended warranty for your merchandise.3.4.2 Obtaining RMA NumberIf you believe that something is wrong with the equipment, call Zultys’s inside sales departmentto obtain a return merchandise authorization (RMA) number. If the problem is technical in nature,Zultys may first try to diagnose the problem over the telephone. If the problem cannot beresolved over the telephone, Zultys will issue an RMA number and give you specific instructionsfor the return of the merchandise to Zultys’s facilities.

3. Receiving the ZIP4x5 19If you have purchased Zultys’s products through a distributor outside the US, contact thedistributor for specific instructions. Zultys issues RMA numbers for customers who buy itsproducts directly from Zultys. Distributors will offer their own service and support for Zultys’sproducts.3.4.3 Describing the ProblemIf you are returning equipment to Zultys for service, attach a tag or sheet of paper to theequipment giving the following details:•your company or institution’s name, address, and phone number•the main person to contact, an alternative contact, and their phone numbers if different fromthe main phone number•the return shipping address and any special shipping instructions•the model number and serial number of the equipment being returned•a description of the failure (If failure is intermittent, describe its frequency and specialcondition that initiate the failure.)•any additional comments3.4.4 AccessoriesDo not return any of the accessories with the equipment unless you suspect that one of them isfaulty. If you return an accessory, place a tag on it that clearly identifies it as yours, and brieflyexplain the problem.3.4.5 PackingWherever possible, use the original packing materials to ship the equipment. If these are notavailable, containers and cushioning material similar to those originally used are available fromZultys.If it is inconvenient to obtain supplies from Zultys, use a strong, double-walled shipping carton.Place about 70 mm (3 in) of cushioning material around all sides of the equipment. Zultys is not responsible for any damage that occurs during shipment back to the factory.3.4.6 ShippingObtain from your nearest Zultys sales or service representative the correct address to which youshould return the equipment. Clearly mark the container with Zultys’s address and your ownaddress. Ship the package prepaid and insured to Zultys.The method of shipment which Zultys will return repaired merchandise back to your facility willbe the same method by which you shipped the merchandise to Zultys. For example, if youshipped merchandise to Zultys by ground shipment, Zultys will return the merchandise to youby ground shipment. If the merchandise must be repaired and returned to you as soon aspossible, you must arrange for the merchandise to be shipped to Zultys by overnight shipment.

20ZIP4x5 User’s Manual3.4.7 CorrespondenceIn any correspondence subsequent to the return of equipment, always refer to the equipment bymodel number and serial number.

21 Chapter 4Installation4.1 Regulatory CertificationThe ZIP4x5 is a class B digital device. This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try andcorrect the interference by one or more of the following measures:•reorient or locate the receiving antenna•increase the separation between the equipment and receiver•connect the equipment into an outlet on a circuit different from that to which the receiver isconnected•consult the dealer or an experienced radio/TV technician for helpImportant Modifications made to the product, unless expressly approved by ZultysTechnologies, could void the user’s authority to operate the equipment.Important The term “IC:” before the radio certification number only signifies that IndustryCanada technical specifications were met.Important This Class B digital apparatus complies with Canadian ICES-003Important Cet appareil numérique de la classe B est conforme à la norme NMB-003 duCanada.

22ZIP4x5 User’s Manual4.2 Preparing the ZIP4x5 for Use4.2.1 HandsetConnect the handset to the bottom of the phone as identified in figure 1-2. Trap the cord in theclips at the back of the phone to relieve strain on the connector and to allow the cord to exit neatlyto the left of the phone.4.2.2 PowerYou can power the ZIP4x5 from an ac supply or from the network.4.2.2.1 Power over EthernetIf you ordered the phone without an ac adapter you must ensure that you connect the ZIP4x5 toan Ethernet switch that provides power as per IEEE 802.3af.1 The ZIP4x5 takes its power from theport labelled LAN. The cable length can be 100 m, the maximum allowed for an unpoweredEthernet circuit.4.2.2.2 Power from an AC AdapterIf you have ordered the phone with an ac adapter, you should use it regardless whether power isprovided over the Ethernet connection. Connect the ac adapter to the bottom of the phone asidentified in figure 1-2. The plug is at a right angle to the cord so that if you accidentally pull thephone, the cord does not fall out.24.2.2.3 Dual Power SourcesIf the phone receives power from both the Ethernet port and an ac adapter, it consumes poweronly from the ac adapter. You can see what power is applied to the ZIP4x5 using the menu. Seesection 10.4.3 on page 144.If the ac power fails, the phone can take power from a LAN power source and continue to operate.The length of time that the phone will operate with the power from the LAN is dependent on thecapacity of the battery connected to the power source and the number of phones drawing power.Using the phone to make a call does not materially change the power used by the phone.4.2.2.4 When Power is AppliedWhen you apply power, the phone starts to operate. The ZIP 4x5 does not have any power switch.After the phone is powered up, it displays a message on the screen as shown in section 4.3 on page26.1. The ZIP4x5 is fully compliant with IEE 802.3af and is a device that consumes “half power” as defined by the specifica-tion.2. You should use one of the ac adapters provided by Zultys. If you are unable to obtain this, use an adapter that has a dcoutput of 12 V, 600 mA. The plug should be 2.0 mm or 2.1 mm with the center positive.Zultys does not warrant operation of the ZIP4x5 with any adapters other than those supplied by Zultys.

4. Installation234.2.3 Wall or Desk MountingYou can mount the phone on a wall or on a desk. Install the rear platform that has the two backfeet if you are putting the phone on a desk. Remove this platform (as shown in figure 1-2) if youwant to mount the phone on the wall, and mount it in the lower position.4.2.4 Connecting to the NetworkYou normally connect the ZIP4x5 to a LAN or directly to a call control system. The call controlsystem manages many function for the phone including the ability to originate and terminate acall, and provides a storage for voice mail. This section briefly describes the process of connectingthe phone to a network.Section 9.2.9 on page 105 describes the method of directly connecting two ZIP4x5 phones, eitheroutside of a LAN or isolated within a network.4.2.4.1 Auto MDI/MDI-X and Auto NegotiationEach of the four Ethernet circuits on the ZIP4x5 has automatic sensing to determine on whichpins of the RJ45 connector it should transmit data and on which pins of the RJ45 connector itshould receive data. This is referred to as auto MDI/MDI-X.With this function in the phone, you can use a straight or cross wired cable to connect the phoneto any other device. If you connect the phone to a device that itself has auto MDI/MDI-X, thedevices resolve the appropriate pins to use through random selection.Also, each of the four Ethernet circuits on the ZIP4x5 has automatic sensing to determine whetherthe circuit should operate at 10 Mb/s or 100Mb/s. The phone will always attempt to establishconnection at the higher rate and will fall back to the lower rate only if the device to which youhave connected the phone cannot operate at the higher rate.4.2.4.2 Single CircuitConnect the LAN circuit on the back of the phone to the LAN, as shown in figure 4-1.You may have a router or switch to which you connect the phone. Whatever connectivity existsbetween the phone and the SIP server, ensure that you use the LAN port to perform the uplink.1Connect your PC or notebook to any of the other three circuits (P1, P2, or P3). You can identify ifthe phone has connectivity and activity on any of the circuits as described in section 10.4.3 onpage 144.4.2.4.3 CascadingThe ZIP4x5 has a very efficient network switch incorporated in it so you can cascade the phonesas shown in figure 4-2.1. If you do not use VLANs on the phone, and if you do not expect the phone to receive power from the network, you canactually use any port to connect to the phone system. In this case, the switch inside the ZIP 4x5 is an unmanaged switchand it does not matter to which port you connect. However, the phone must have connectivity on the port marked LANand always using this to connect to the network ensures that you have a consistent network that is easier to maintain.

24ZIP4x5 User’s ManualConnect the LAN port on the phone to the LAN and connect other phones to the other ports.Connect your PC to the fourth port. You can use any of the ports P1, P2, and P3 for the otherphones or your PC.At the second phone in the chain, connect the LAN port to the first phone in the chain. The firstphone can obtain power from the LAN through the first phone. The ZIP4x5 does not propagatethe power to any of the ports P1, P2, or P3. Therefore, a phone connected to one of these portsmust obtain its power from an ac adapter.Although you can continue to cascade phones in this manner, it is not recommended that you doso. The network may be difficult to manage and may have poor performance.Figure 4-1 Connecting the ZIP4x5 and Your PCFigure 4-2 Cascading Phonesother accessory Network with call controlNetwork with call controlLANLAN LANotherother

4. Installation25Once you have made the connections, you can identify if a phone has connectivity and activityon any of its circuits as described in section 10.4.3 on page 144.4.2.5 Connecting a HeadsetYou can connect a headset to the audio socket on the side of the phone or in series with thehandset. You can also use a Bluetooth wireless headset with the ZIP4x5. The most convenientsolution is the wireless headset while the lower cost alternative is a headset on the side of thephone. Audio socket output parameters include:•Rated Output: 12.5 mW•Impedance (ZL): 32 ohms•Microphone Type: condenser•Connector Type: 2.5 mm mono phone jack Tip – MicrophoneRing – SpeakerSleeve – GroundZultys supplies a headset with the phone, but you can buy good quality replacement headsets forabout $20. Traditionally, headsets have been designed to plug in series with the handset. These also providegood quality but typically cost $120.With the ZIP4x5 you can choose either type of headset. Switching between the headset, handset,and speaker is described in section 9.1.1 on page 97.4.2.5.1 Using a Wireless HeadsetThe ZIP4x5 supports all Bluetooth wireless headsets. Section 10.5.7 on page 155 describes theprocedure for programming the phone to recognize your Bluetooth headset and to pair yourheadset with the ZIP4x5.4.2.5.2 Using the Audio ConnectorThe connector on the side of the phone is a 2.5 mm socket. Connect the headset that came withthe phone or an alternative standard headset into this socket.Do not buy a headset that has two connectors. These are normally used to connect to the soundports of a PC. Those connectors are 3.5 mm.4.2.5.3 Using an External Switch BoxYou can connect a headset in series with the handset connector as shown in figure 4-4. The switchbox usually has an amplifier that is powered either from an ac outlet or from batteries. This boxallows you to select between using the handset and using the headset.

26ZIP4x5 User’s Manual4.3 Power On4.3.1 DescriptionWhen you power up the ZIP4x5, it performs a quick power on self test, and typically startsoperation in less than 20 seconds. The exact time depends on your network. The phone tries tofind a DHCP server if DHCP is enabled.1 The DHCP server points to a TFTP server. The TFTPFigure 4-3 Connecting a Headset to the ZIP4x5 Using the Audio ConnectorFigure 4-4 Connecting a Headset to the ZIP4x5 Using an External Switch Box1. When the phone is shipped from the factory, DHCP is enabled. To fix the IP address in the phone, see section 10.6.2 onpage 166.2.5 mm plugSwitch Box

4. Installation29When you have finished pressing all of the buttons and keys, the phone displays:The phone then performs an FXO (analog) Test1 and displays the result:The phone then tests the Ethernet circuits. It sends data from P1 to P2, then P2 to P3, and displays:The phone then sends data from P3 to the LAN port, then from the LAN port to P3, and displays:If the test is successful, the phone displays:Keypad test passed.FXO Test Passed1. The ZIP4x5 displays this result only if you have connected the phone to perform the FXO analog test. If the phone isnot connected to an MX250, this panel will display “FXO Test Failed”..^ ^Ethernet test 1-2^ ^Ethernet test 2-1^ ^Ethernet test 3-LAN^ ^Ethernet test LAN-3Ethernet test OK

30ZIP4x5 User’s ManualIf the test is unsuccessful, the phone stops the test at the failed test, beeps three times, anddisplays:The phone then proceeds to load the software as described in section 4.3.2 on page 27, anddisplays:Caution Remove the Ethernet cables that are looping the Ethernet circuits and connect thephone to the network. The phone will not operate if you have a loop on any of theEthernet circuits.4.3.4.3 Quick Test of the Speaker and MicrophoneThis test verifies the amplitude of sound received in the microphone over a range of levels ofsound transmitted from the speaker. To perform the test:1. Power cycle the phone by disconnecting power, then reconnecting power.2. Immediately after reconnecting power, press and hold the Speaker key until the followingdisplay appears:The phone transmits a sequence of tones at different level. The test takes six seconds. At the end,the phone displays one of the following:FAILEthernet test 1-2Loading.Testing AudioAudio test PASSEDAudio test FAILED

4. Installation31The phone then proceeds to load the software as described in section 4.3.2 on page 27, anddisplays:Important If you had disconnected the phone from the network, connect the phone to thenetwork and remove all unnecessary cables from the phone.4.3.5 Communicating with the Network4.3.5.1 Phone Not ConnectedIf the phone is not connected on its LAN circuit, the phone displays:4.3.5.2 Interface SetupIf you have programmed the ZIP4x5 to function as a remote server, as described in chapter 8,starting on page 73, the phone displays the following panel while setting up the firewall.This step usually requires less than five seconds.4.3.5.3 Connecting to a DHCP ServerIf the phone is configured for dynamic IP addressing, it attempts to locate a DHCP server. Thephone displays:Depending on your network, this can take from two to 30 seconds. The phone displays a progressbar, adding one character every second. It displays the time it has been trying in the lower rightcorner of the display, in hours, minutes, and seconds. Every 20 s, the phone clears the progressbar then starts adding one character each second again.The phone continues to try to find the DHCP server indefinitely.Loading.ZIP4x5 SIP PhonePhone not connectedSetting interfaces••••00:04Looking for DHCP••••••••00:08

32ZIP4x5 User’s Manual4.3.5.4 Connecting to the PPPoE ServerIf the phone is configured to connect with a PPPoE server, as described in section 8.3.2 on page79, it displays the following panel while attempting to locate the server.Depending on your network, this can take from two to 30 seconds. The phone displays a progressbar, adding one character every second. It displays the time it has been trying in the lower rightcorner of the display, in hours, minutes, and seconds. Every 20 s, the phone clears the progressbar then starts adding one character each second again.4.3.5.5 Connecting to the STUN ServerIf the phone is configured to connect with a STUN server, it displays the following panel whileattempting to locate the server. Section C.4.1.1 on page 199 describes the STUN Serverconfiguration.This may require up to ten seconds. If the phone is configured to find the Stun Server, it willattempt to do so indefinitely until it connects to one.If the NAT type1 is not supported by the STUN protocol, the ZIP4x5 displays the following error:4.3.5.6 Connecting to the TFTP ServerOnce the phone has its IP address, it tries to locate the TFTP server if it is programmed with theaddress of the TFTP server or if it obtained the address from the DHCP server. The phonedisplays:Depending on your network, this can take from one to ten seconds. The phone displays aprogress bar, adding one character every second. It displays the time it has been trying in thelower right corner of the display, in seconds. Starting PPPoE••••••••00:08Starting PPPoE••••••••00:08Unsupported NAT TypeUnable to run STUN1. The ZIP4x5 STUN implementation supports open internet (no NAT), Full Cone NAT, Restricted Cone NAT, and PortRestricted Cone NAT. Refer to RFC 3489 for details on STUN and the supported NAT types.Looking for TFTP•••00:03

4. Installation33If the phone can find the TFTP server, the configuration file or files it retrieves may indicate thatthe phone needs to update its software. See section 5.4.5 on page 45 for details of the screen thatthe phone shows in this case.If the phone can find the TFTP server but cannot find the configuration file (or it can find it, butthere is an error with it), the phone displays:The phone displays this for three seconds and then proceeds to register.The phone continues to try to find the TFTP server for ten seconds. If it cannot locate the TFTPserver within this time, and the phone has the address of a SIP registrar, it displaysThe phone displays this for three seconds and then proceeds to register.4.3.5.7 Connecting to the SIP RegistrarIf the phone has an address for the SIP registrar, it displays:The phone continues to attempt to register indefinitely. If the SIP registrar rejects the attempt toregister, the phone displays:4.3.5.8 Failure When Using a Fixed IP AddressIf you have configured the phone to use a fixed IP address, and to not use DHCP, the phoneshould boot up and connect to the TFTP server (if provisioned) and then connect to the SIPregistrar. If there is a problem with this process, the phone displays:Use the menu to configure the protected settings as described in section 10.6 on page 164, thenrestart the phone.ZIP4x5 SIP PhoneUnable to readconfiguration fileZIP4x5 SIP PhoneUnable to locateTFTP serverSIP registration00:06SIP registrationRejected 02:17Failed to initializenetwork. Correctsettings and reboot.

34ZIP4x5 User’s ManualThe phone will also display this message if you have configured it for DHCP but the DHCP serveris incorrectly configured. This is an unusual situation, because administrators take great care toensure that the DHCP servers are correctly configured.4.3.5.9 Prohibition on Making a CallWhen there is one or more of the problems listed above, the phone flashes the LEDs orange onthe Call buttons. It flashes the first button for 250 ms, then the second for 250 ms, and so on, togive the appearance of a “walking” pattern. The LEDs on the call buttons remain in this state, thecall buttons are inoperative, the phone does not provide dial tone, and you cannot make any callsuntil you have resolved the problem.You can use other functions of the phone. Therefore you can change the configuration and thesettings, view or modify the phone book, and use the calculator. Once you press keys to activatethe other functions, the display removes the notification of the error condition. You need to usethe menu to access the status as described in section 10.4.3 on page 144.4.3.5.10 Attempt to Establish ConnectionThe phone continually tries to re-establish connection with the network, once every fourseconds.1 If it does establish connection, it stops the walking pattern on the call appearancebuttons and you can use the phone to make calls. You do not need to cycle the power on thephone to make the phone usable.The phone retains the display until you press a key or until you make a call or the phone receivesa call. You need to use the menu to access the status as described in section 10.4.3 on page 144.4.3.6 Satisfactory Connections4.3.6.1 Date and TimeYour ZIP4x5 may prompt you for the date and time. The prompts that you see are based on thesystem to which the phone is connected. Many systems may automatically configure the time,date, and geographic location of your phone. Other systems may connect your phone directly toan NTP server. If the phone connects to an NTP server, it needs to know the difference between the local timeand GMT.2 Instead of asking for a location, the phone therefore displays:1. The ZIP4x5 sends the second request 500 ms after the first request. It sends the third request 1.0 s after that, the fourthrequest 2.0 s after that, and thereafter every four seconds.Enter differencein time from GMT}-8:002. After the phone has booted it uses SNTP to obtain the date and time for the first time. Thereafter, it uses NTP every tento 15 minutes to obtain the date and time.

4. Installation35Use the Up and Down buttons or the Up and Down keys to select the correct time difference. Thephone changes the time in units of 30 minutes. The maximum time differences are +12 hours and–12 hours. When you have made your entry, press the Enter button. The phone shows the idledisplay.If the phone cannot find an NTP server, you must enter the date and time manually. The ZIP4x5displays:Use the Up and Down buttons or the Up and Down keys to select the correct year. The phonedefaults to 2003 scrolls to a maximum of 2023, then to 2003 again.Press the Enter button. The phone displays:Use the Up and Down buttons or the Up and Down keys to scroll between the months.Press the Enter button. The phone displays:Use the Up and Down buttons or the Up and Down keys to scroll between the days. The phonescrolls back to 1 once it has reached 28, 29, 30, or 31, depending on the year and month you haveentered.Press the Enter button. The phone displays:Enter the time with the keypad using 24 hour notation.1 Use the * key to enter the colon characterthat separates hours from minutes and minutes from seconds. You do not have to enter theseconds. If you do not enter the seconds, the ZIP4x5 sets the seconds to zero.Press the Enter button when you have entered the time. The phone shows the idle display, asdescribed in section 6.3.1 on page 50.You can subsequently alter the date and time using the menu as described in section 10.5.4 onpage 148, or you can cycle power on the phone to obtain the same screen.Enter dateYear:}2004Enter dateMonth:}JanuaryEnter dateDay:}1Enter time }15:08:391. Use 24 hour notation regardless of the format you may have chosen in which time is displayed in section 10.5.10 on page160.

36ZIP4x5 User’s Manual4.3.6.2 Subsequent Loss of ConnectionIf the phone has established LAN connectivity and registered with the phone system, and then itloses connectivity, or a subsequent registration request is denied, you cannot make calls. Thephone remains in this state as described in section 4.3.5.9 on page 34.

37 Chapter 5Provisioning the Phone5.1 IntroductionThis and the following sections (section 5.2 through section 5.4) describe the methods used by theZIP4x5 to automatically obtain its configuration. These sections describe the underlying methodfor the exchanges that take place. You do not need to read these sections unless you want tounderstand the provisioning process, or make the ZIP4x5 work with a particular SIP system.5.1.1 Summary of Boot ProcessTo use the ZIP4x5 in its usual manner, you must connect the phone to a LAN that has a DHCPserver and a TFTP server. The start up process is as follows:1. The DHCP server provides an IP address to the phone and also the address of the TFTPserver.2. The phone accesses the TFTP server to locate a configuration file that is common for allZIP4x5 phones connected to your network. 3. The phone reads the common configuration file. The configuration file points to a directorywhere the phone can find its specific configuration file.4. The phone reads its specific configuration file. 5. The phone uses the data retrieved from the configuration files to configure itself so that itcan operate properly in the network.5.1.2 DHCP SupportWhen you connect the ZIP4x5 phone to a DHCP server, the DHCP server must be configuredwith the following options for your network to fully support the ZIP4x5:•subnet mask (option 1)•default gateway (option 3)•domain name server (option 6)•IP Address (option 50)•TFTP server name (option 66)In addition, it is recommended that your DHCP server also provide:•NTP Time Offset (option 2)

38ZIP4x5 User’s Manual•domain name (option 15)•NTP servers (option 42)You should consult your system administrator for specific details on configuration of the DHCPserver.5.2 Configuration FilesThere can be three sources of configuration for the phone:•what is saved in a common configuration file•what is saved in a specific configuration file•what is saved in the phone’s memoryThe common configuration file is called:ZIP4x5_common.cfgThis file is stored in the root directory of the TFTP server.The specific configuration file is called:<MAC address>.cfgFor example,0050C2180FD8.cfgThe format for the files is identical, and is shown in figure 5-1. This is an ASCII text file, with thename of the parameter and the value of the parameter listed on the same line. Each parametermust be within the section (denoted by square brackets “[]”). The contents of the file are not casesensitive; you can enter parameter names in upper or lower case. Comment lines are denotedwith a leading semi-colon (;) and have no effect on the operation of the phone.[HW_CONFIG]lcd_contrast=8ring_volume=5speaker_volume=5headset_volume=5handset_volume=5Figure 5-1 Format for Configuration File

5. Provisioning the Phone 39[VLAN_CONFIG]mode=1vlan_id_a=1circuits_a=UUUUUvlan_id_b=-1circuits_b=EEEEEvlan_id_c=-1circuits_c=EEEEEvlan_id_d=-1circuits_d=EEEEEvlan_id_e=-1circuits_e=EEEEEvlan_id_f=-1circuits_f=EEEEEvlan_id_g=-1circuits_g=EEEEEvlan_id_h=-1circuits_h=EEEEEcos_setting=5dscp_setting=0[NET_CONFIG]use_dhcp=yesip_addr=subnet_mask=default_gateway=primary_dns=secondary_dns=;host_name is DNS lookup for this phonehost_name=domain=zultys.comntp_server_addr=tftp_server_addr=tftp_cfg_dir=./ZIP4x5[SIP_CONFIG]phone_sip_port=5060rtp_start_port=33000;The Device ID is the user portion of the SIP URIdevice_id=West;The Display Name is sent in SIP messagesdisplay_name=Zultys ZIP4x5;This must always be set to “yes”use_proxy=yesregister_w_proxy=yesproxy_addr=10.1.32.224proxy_port=5060voice_mail_uri=258call_park_extension=259registration_expires=3600session_expires=3600Figure 5-1 Format for Configuration File (Continued)

40ZIP4x5 User’s ManualMany parameters in the configuration files correspond to the parameters that you can configurethrough the menu of the ZIP4x5. Configuration parameters are described in Appendix C, startingon page 197.Every time the phone restarts (either by command or by power on), the phone reads theconfiguration files. It extracts the data in the files and saves it to memory, overwriting allparameters that are saved in memory except that if the user settings are not configured to becleared, it retains the settings in the phone.1The common configuration file specifies a directory, using the parameter:2tftp_cfg_dir= <directory_name>The phone accesses the specified directory (which can be blank, or ‘.’) and reads the specificconfiguration file from the specified directory. It extracts the data in the file and saves it tomemory, overwriting whatever parameters were already saved in memory. The parametersspecified in the specific configuration file take precedence over the same parameters specified inthe common configuration file.For example, suppose the common configuration specifies the greeting message to be:[AUDIO_INFO]ext_ring_tone=0ext_cust_ring=int_ring_tone=0int_cust_ring=ring_tone2=0cust_ring2=key_click=0codec=0distinctive_ring=yesaccept_url=nosound_url=[GENERAL_INFO]software_version=1.0.0;The message displayed on the LCD in idle modegreeting_message=ZIP 4x5 SIP Phonepassword=985897time_fmt=%H:%Mdate_fmt=%a %d %b %ydate_time_order=0;This is the offset from GMT, in minutestimezone=-480country=USAlanguage=ENGLISHdelmtr=._clear_settings=21. You select whether you want the user settings cleared using the menu, as described in section 10.5.3.2. If the specific configuration file contains such a line, the phone ignores it.Figure 5-1 Format for Configuration File (Continued)

5. Provisioning the Phone 41ZIP 4x5 SIP Phoneand the specific configuration specifies the greeting message to be:Freddy PhoneThen, in the idle state, the phone will display: The phone continues to start, using the parameters that are now saved in its memory.5.3 Web Interface Configuration UtilityThe ZIP4x5 provides a web interface configuration utility, offering an alternative method ofprovisioning your phone. Through this utility, you can modify all operating parameters that areavailable through configuration files. To access the web interface, enter the IP address of your ZIP4x5 in the address entry box of yourweb browser and press the enter button. The home panel will appear in your browser.Appendix D, starting on page 225, describes each panel of the web interface configuration utility.5.4 Updating Software on the ZIP4x55.4.1 IntroductionYou must connect the phone to a LAN that has a TFTP server and a DHCP server.1 The DHCPserver provides an IP address to the phone and also the address of the TFTP server. The phoneaccesses the TFTP server to locate and retrieve its configuration files. It reads the configurationfiles to identify what software version it should be using. If the files specify a different versionfrom that on the phone, the phone retrieves the specified software version from the TFTP server.5.4.2 Specific DescriptionTo update the software, one or both of the configuration files described in section 5.2 must specifythe software version that the phone must use. This is specified on the line shown in figure 5-2 as:software_version=0.1.4The phone compares the version specified to that installed on the phone. If the versions are thesame, the phone continues with the startup process. If the versions are different, the phoneretrieves the software from the TFTP site. The phone looks first in the root directory of the TFTPsite then in the subdirectory of the TFTP site where the specific configuration file may be stored,if one is specified.Freddy PhoneWed 20 Nov 02 14:501. You cannot update the software if you fix the IP address of the phone.

42ZIP4x5 User’s ManualThe software name is:ZIP4x5_<version>.binFor example:ZIP4x5_0_1_4.binThe file name uses the underscore character to separate the three parts of the software versionnumber.If the common configuration file indicates a different version of the software than the specificconfiguration file, the phone retrieves the software version specified by the specific configurationfile.The phone programs itself with the new software and restarts.5.4.3 Binary FileThe binary file for the software contains the software version. When the ZIP4x5 reads the file, itverifies the version that is contained in the file with the file name and will not load it if theversions do not match.The first characters in the binary file are encoded as a null terminated ASCII string. The end of thefile contains a 16 bit CRC sum check.The size of the binary file is between 2 MB and 4 MB.5.4.4 Ladder DiagramFigure 5-2 shows the messages used in this process. The following sections describe the process.5.4.4.1 Step 1Action. ZIP4x5 sends DHCP DISCOVER (broadcast)Description. The ZIP4x5 boots (after power is initially applied or after receiving a SIP NOTIFYmessage) and sends out a DHCP DISCOVER message requesting an IP Address and other options(same as those provided in DHCP ACK).5.4.4.2 Step 2Action. DHCP Server responds with a DHCP OFFERDescription. The DHCP Server indicates an available IP Address to the ZIP4x5.5.4.4.3 Step 3Action. ZIP4x5 sends DHCP REQUEST (broadcast)Description. The ZIP4x5 accepts the DHCP server’s offer and asks the server to provide itsconfiguration.

5. Provisioning the Phone 43Figure 5-2 Messages for ZIP4x5 to Obtain ConfigurationZIP 4x5 DHCP Server1. DHCP DISCOVERSIP Server TFTPServer2. DHCP OFFER3. DHCP REQUEST4. DHCP ACK5. TFTP read requestZIP4x5_common.cfg6. TFTP data receivedZIP4x5_common.cfg7. TFTP read requestMAC_address.cfg8. TFTP data receivedMAC_address.cfg9. TFTP read requestZIP4x5_version.bin10. TFTP data receivedZIP4x5_version.bin

44ZIP4x5 User’s Manual5.4.4.4 Step 4Action. DHCP Server sends DHCP ACKDescription. DHCP Server responds with committed IP Address and other configuration options.The specific options needed by the ZIP4x5 are described in section 5.1.2.5.4.4.5 Step 5Action. ZIP4x5 initiates TFTP read request for ZIP4x5_common.cfgDescription. ZIP4x5 requests its common configuration file using the TFTP Server addressprovided by DHCP option #66.5.4.4.6 Step 6Action. ZIP4x5 receives TFTP data (ZIP4x5_common.cfg) from the TFTP ServerDescription. The ZIP4x5 receives the common configuration file and reads it. It is possible that thespecific configuration file for a phone is located in a directory that is not the TFTP root directory.If this is the case, the subdirectory is indicated in this common configuration file.5.4.4.7 Step 7Action. ZIP4x5 initiates TFTP read request for MAC_address.cfgDescription. The ZIP4x5 requests its specific configuration file. The specific configuration file isuniquely named with the specific MAC address of the phone (for example, 0008A10FF312.cfg).5.4.4.8 Step 8Action. ZIP4x5 receives TFTP data (MAC_address.cfg) from the TFTP ServerDescription. The ZIP4x5 reads its specific configuration file and determines whether its softwareversion matches that specified. If not, it retrieves the new software.5.4.4.9 Step 9Action. ZIP4x5 initiates TFTP read request for ZIP4x5_version bin.Description. The ZIP4x5 requests the specific software version using the TFTP Server addressprovided by DHCP option #66 (for example, ZIP4x5_0_1_34.bin).5.4.4.10 Step 10Action. The ZIP4x5 receives TFTP data (ZIP4x5_version.bin) from the TFTP ServerDescription. After downloading the software version the ZIP4x5 reboots and repeats all of thesteps (except for retrieving software). At this point, the ZIP4x5 performs a checksum verificationand compares the new software version file name with the version information stored internallyto the .bin file. If the checksum fails or if the file name does not match that of the versioninformation stored internally to the .bin file, the phone indicates an error and loads the previoussoftware version.

5. Provisioning the Phone 455.4.5 SummaryFor a user, the process of updating the software is fully automatic. The administrator of thenetwork can initiate this process at any time. When the phone is idle, it will start the process ofupdating the software. Usually, the administrator would cause this to happen when no one islikely to want to use the phone.To start the update process, the software in the phone restarts and displays:The phone displays this message using different characters than normal, and only two lines oftext. It shows the progress of the update on the second line using periods (full stops). There are20 characters on the line and each period indicates the phone has completed about 5% of theprogramming task. The phone shows a new period every one to three seconds.Important Do not disturb the phone during the update process. You cannot use the phoneto make or receive calls while the software is being updated. This process takesabout 30 seconds.When the phone has provisioned the software, it restarts itself, just as it does when you power iton. After about 15 seconds the phone displays the idle display and is ready to use.If the software update process fails, the phone may display:The phone displays this message if it found the software file but the file had been corrupted.Contact the system administrator to resolve this. You will not be able to use the phone until youresolve the problem.Updating software............Updating softwareFailed......

46ZIP4x5 User’s Manual

47 Chapter 6Interacting with the Phone6.1 Call AppearancesThis ZIP4x5 is different from phones that have been in common use for the past 100 years. Onolder phones a physical pair (or two pairs) of wires carry a single voice call. A phone that canaccommodate two voice calls connects to two such circuits, with each circuit being referred to asa line. A switch on the phone selects between the lines (and therefore with whom you are talking).A phone that has four lines has four such sets of circuits and can allow four simultaneous calls.The ZIP4x5 connects an ethernet circuit and an analog circuit to the switch. All digital calls takeplace over one ethernet circuit, or line. Dedicated software and hardware inside the phone andthe switch permit you to have four simultaneous conversations. The analog circuit carries a singlevoice call.The ZIP4x5 has four call appearances. Each call appearance allows you to have a separate orjoined call. Each call appearance can carry a single voice calls. Call appearances one, two, andthree carry calls from the ethernet circuit. Call appearance four can carry calls over the ethernetcircuit or the analog circuit. If the analog circuit is connected directly to the PSTN, it will have adifferent phone number than the digital call appearances. The digital and analog circuits can beprogrammed to the same phone number and extension if the ZIP4x5 is connected to a mediaexchange system that supports digital and analog calls.6.2 Using the Keypad and the ButtonsThe term buttons refers to the switches that are identified by the writing on a label below them,shown in figure 6-1.The term keypad refers to the switches that have writing on them, shown in figure 6-2. 6.2.1 Description of Keypad6.2.1.1 Numerals and Dedicated KeysThe keypad has keys labelled 0 to 9, *, and #. These are used to dial a number and perform otherfunctions. The keypad has keys that are dedicated to specific purposes identified by the text onthe key.

48ZIP4x5 User’s Manual6.2.1.2 Function KeyThe keypad has a key marked Func that serves as a function, or shift, key to select alternative usesfor the keys and buttons. To select the alternative use, press and release the Func button once,then press the appropriate button or key to select the alternative function.Important Do not press the Func key and another button or key simultaneously. The ZIP4x5can read only a single button or key being pressed at a time.Figure 6-1 View of Buttons on ZIP4x5Figure 6-2 View of Keys on ZIP4x5

6. Interacting with the Phone 49The Func key is green and the label on the card that shows the alternative function of the buttonis also green. If you cannot distinguish between these colors, the alternative use is written to theright of the standard use.For example, to select the calculator mode, press Func then the button marked Mem and Calc. Toexit calculator mode, repeat this sequence. In subsequent sections of this document, the text doesnot describe this sequence. That is, the text states, for example:“To enter calculator mode, press Calc”This saves writing:“To enter calculator mode, press Func then Mem | Calc”6.2.1.3 Volume KeysThe volume keys are identified by the double arrows on the wide button. You press the up arrowto increase the volume and the down arrow to decrease the volume. The keys are used for otherfunctions depending on the mode.When you change the volume, the phone remembers the value you set and uses it in the future.When you power down the phone and restore power, the phone retains the same setting. Thereare five individual volume settings:1. When the phone is idle, the volume keys control the volume of the ringer. When you pressthe keys, the phone plays the ringer tone that you have currently selected. You can adjustthe volume to suit your needs. After you stop pressing the key, the ZIP4x5 continues to playthe ringer tone for two seconds.12. When you are using the handset, the volume keys control the volume at which you hear thespeech from the other party through the earpiece.3. When you are using the headset as shown in figure 4-3 on page 26, the volume keys controlthe volume at which you hear the speech from the other party through the earpiece.4. When you are using the headset as shown in section 4-4 on page 26, the volume keys controlthe volume at which you hear the speech from the other party through the earpiece.5. When you are using the speaker, the volume keys control the volume at which you hear thespeech from the other party through the speaker.When you adjust the volume of the headset, ensure that you have the handset on the cradle. Thephone adjusts the level for the correct external headset (through a switch box or through an audioconnector) depending if you have plugged a headset into the audio connector or not.Each volume control has twenty one settings, numbered 0 to 20. When you adjust the level, thedisplay shows:The bar at the bottom of the display represents the volume graphically, from 0 to 20. When thevolume is at 0, the sound is completely turned off.1. Section 10.6.6 on page 178 describes how you select the tone that is played when the phone rings.Volume:Speaker 7••••••••••••••

50ZIP4x5 User’s ManualThe volume control does not alter the level of the sound at which that the phone sends its signalto the network.6.2.2 Description of ButtonsThe buttons are used to access features or functions of the phone or phone system easily. You usethe buttons labelled Call 1, Call 2, Call 3, and Call 4 to make, receive, and terminate calls. The othereleven buttons have two purposes, depending if you pressed the Func key before you pressed thebutton.1To access the secondary function of a button, press and release Func then press the button. If youdo not press a button within 2½ seconds, the shift function is inoperative, so that when you pressa button you will select the standard use for the button not the secondary function.If you select the Func key in error, you can cancel it by pressing Func again.When you press the Func key, it does not lock the selection of secondary use of the buttons.2Therefore, if you want to select another secondary function, you must press the Func buttonagain. For example, suppose you want to enter calculator mode and then want to pick up apreviously parked call. You would press:Func, Mem | Calc, Func, Park | PickupYou use the top row of buttons to navigate the menu as described in section 6.3.3 on page 51.When you press Func before you press one of the buttons on the top row, the phone dials anumber that you have stored in memory locations 01 to 05.3The use of each of the buttons is described in later sections.6.3 Basics of Display OrganizationThe LCD is used to display information and configuration.The top row of buttons provide access to the menu so you can configure the phone. From themenu you can also view information about the phone. Some buttons directly affect the operationof the phone or the way the phone interacts with the phone system.As you make or receive calls, or affect the operation of the phone, the LCD shows the status of thecalls or interaction with the system.6.3.1 IdleWhen the phone is idle:•each of the call appearance LEDs is off•the phone displays a greeting message on the first row of the display•the phone displays the date and time on the third row of the display1. The Func key is described in section 6.2.1.2 on page 48.2. This behavior is different from when you are dialling and use the Func key to select alternative use for the keys.3. See section 9.7.3 on page 122 for more details.

6. Interacting with the Phone 51For example:You can program the greeting message and the format in which the date and time are shown.1 6.3.2 Incoming CallWhen your ZIP4x5 receives a call, the phone displays:The phone shows:•the call appearance number (1 to 4 instead of ‘x’)•the name of the intended recipient of the call (on the first line)•the name or phone number of the caller if available6.3.3 Menu6.3.3.1 IntroductionThis section describes how to access and exit the menu. Section 10.1 on page 133 describes themenu structure.6.3.3.2 Accessing and ExitingYou access the configuration by pressing the Menu button. You can access the menu only whenthe phone is on hook and is idle (no calls in progress or connected). As soon as you press the Menubutton, the LED on the speaker key and the Mute button flash synchronously. They flash red for250 ms and are off for 750 ms to inform you that you are accessing the menu.To exit the menu, press the Menu button again or any call appearance button. If you do not pressany keys or buttons for 60 seconds, the phone automatically exits the Menu mode.6.3.3.3 NavigatingWhen you have accessed the menu, you then use the Enter, Esc, Up, and Down buttons tonavigate through the menu.When you are accessing the menu, you can use the volume keys instead of the up and downbuttons. The key for increase is equivalent to Up and the key for decrease is equivalent to Down.Sales supportSun 22 Jan 04 19:151. See section 10.5.2 on page 147 and section 10.5.10 on page 160 for details.x: To <your_name><caller’s nameor number>

52ZIP4x5 User’s Manual6.3.3.4 Display on LCDWhen you access the menu, the top row on the LCD shows the menu item. The second and thirdrows show menu choices. The currently selected item has an arrow in the first row of the display.An example is shown:When you press the Down button, the arrow moves down, so the above screen would look like:When you press the Down button again, the ZIP4x5 displays the next menu item, keeping thearrow on the bottom row:As you continue to press the Down button, the ZIP4x5 shows each of the menu selections in turn,wrapping round to the first menu selection once it has displayed the last.If you press the Up button when the above display is shown, the arrow moves up to select theprevious item:As you continue to press the Up button, the ZIP4x5 shows each of the menu selections in turn,wrapping round to the last menu selection once it has displayed the first.To select the item pointed to by the arrow, press the Enter button. This action may also show anitem further into the menu structure, or it may move you up one item in the menu structure. Thetop row on the LCD informs you where you are in the menu structure. To move back through the menu structure press the Esc button. If you point to an item in themenu that you want to select and press Esc instead of Enter, the phone does not change the valueof the parameter.For example, if you pressed the Enter button when the display was as above, you would select thecountry to be Canada, and the display would change to:Settings | Country}AustraliaCanadaSettings | CountryAustralia}CanadaSettings | CountryCanada}FranceSettings | Country}CanadaFranceSet | Regional Optn}countrylanguage

6. Interacting with the Phone 53When you next enter a menu, the ZIP4x5 puts the arrow in the second row and points to thecurrently selected item. For example, in the example above, if you pressed the Enter button, thephone has the arrow on the second row and points to the country Canada, instead of Australia.6.3.3.5 Using the Menu and Receiving a CallWhen you are accessing the menu, and the ZIP4x5 receives a call, the ZIP4x5 immediatelychanges the display to be as shown in section 6.3.2 on page 51. As soon as you end the call, thephone returns the display to be as it was prior to the call. You can then continue to use the menufunctions.6.3.3.6 Saving the DataIf you make a change to the data in the menu, then when you exit the menu system (or the phonewaits for 60 s and exits the menu itself), the phone saves the data to non volatile memory. Thephone displays the message:The process of saving the configuration takes about two seconds. Do not turn off the power whilethe phone is displaying this message.When the phone has saved the data, the phone replaces the display shown above with either theidle message or a different message depending on the activity on the phone. You can make andreceive a call while this message is being displayed. The phone continues the process of savingthe data, and changes the display appropriately.If you make a change to the configuration (from the menu) and turn off the power without exitingthe menu system, the ZIP4x5 will not have saved your changes and the changes that you madewill be lost.6.4 Data BackupWhen you remove power from the phone (or there is a power failure), the phone saves data innon-volatile memory. This storage does not depend on a battery and the data will therefore besaved for many years.The data that is saved is:•everything that you enter with the menu•call forwarding and DND selection•the list of recent calls made and received•the list of 100 contacts in the phone bookSaving configurationPlease wait.

54ZIP4x5 User’s Manual

55 Chapter 7Special Functions7.1 Message7.1.1 Voice MessagesWhen you have voice mail messages, the LED on the Msg button flashes red for 500 ms and offfor 500 ms. The LED can become lit while you are in the middle of a conversation, if someone hasleft you a voice mail while you are using the phone.To retrieve your voice mail, press the button. If you did not have the phone off hook, the phoneuses speaker mode and dials the number.1The operation of the voice mail system is independant of the operation of the phone. Follow theprompts for the voice mail system to listen to and delete your messages.7.1.2 Instant MessagesWhen you have unopened instant messages, the LED on the Msg button flashes orange for500 ms and off for 500 ms. Press the Msg button while the LED is flashing to retrieve your InstantMessagesPressing the Msg button when the LED is not flashing orange accesses the voice mail system. Toretrieve your instant message when the Msg is not flashing orange, select Menu | InstantMessages.7.2 Encryption7.2.1 DescriptionThe speech traffic to and from an IP phone is sent over the LAN. It is possible for a person who isequipped with the appropriate equipment to monitor the LAN traffic and thus hear yourconversation. If you want to keep your conversation private so that it cannot be monitored, youshould enable encryption on the phone.1. The phone dials the address (name or number) stored at memory location 00, for the voice mail server. This address canbe filled from the configuration file or by using the menu. See section 5.2 on page 38 for details of the configuration file.See section 10.6.5 on page 176 for details how to enter the phone number of the voice mail system through the menu.

56ZIP4x5 User’s ManualThe administrator can select whether encryption is normally on, normally off, always on, ornever on:1•If the phone is configured so that encryption is always on, pressing the Encrypt button has noeffect. Your phone can make calls only to devices that also support encryption. Your phonecannot make a call to, or receive a call from, a device that cannot encrypt the speech. Youcannot turn off encryption during a call.•If the phone is configured so that you have control over the encryption (normally on ornormally off), your phone can communicate with devices that support or do not supportencryption. You can use the Encrypt button to engage or stop encryption. If you make a callto a device that does not support encryption, and you have requested that the call beencrypted or your phone by default is trying to engage encryption, the call will complete withencryption disabled. You can engage and stop encryption during a call.The phone tries to establish all calls to be encrypted if configured for normally on. You canturn off encryption before or during the call.The phone tries to establish all calls to be without encryption if configured for normally off.You can turn on encryption before or during the call. •If the phone is configured so that encryption is never on (cannot be engaged), pressing theEncrypt button has no effect. Your phone can make calls only to devices that are do not requireencryption. Your phone cannot make a call to, or receive a call from, a device that alwaysencrypts the speech. During a call, your phone will reject a request by the far end to engageencryption.Regardless of the setting chosen by the administrator, the LED on the Encrypt button is off whenthe phone is idle. It becomes active only during a call as described in the sections below.ZIP4x5 encryption is based on open standards. To encrypt the conversation, each person must beusing a device that supports these open standards, such as another ZIP4x5 or compatible phone.The encryption is completely loss-less. That is, the quality of the voice is the same whether thevoice is encrypted or not. The encryption introduces negligible delay to the speech. When youswitch between the call being encrypted or not encrypted, the ZIP4x5 performs this almostinstantaneously, but can take as long as 200 ms if there is a lot of traffic on the network.Ensure that you understand the various ways to originate and terminate a call as described insection 9.2 on page 99 and section 9.6 on page 120 before reading the remainder of this section. Ifyou want to create a conference call with encryption, ensure you know how to use the conferencefunctions as described in section 9.8 on page 126.7.2.2 Individual Calls7.2.2.1 Making a Call When Encryption is Always OnWhenever you select a call appearance (directly or indirectly) to make a call, the LED on theEncrypt button flashes green synchronously with the green LED on the call appearance button.If the device that you are calling supports encryption, the call completes as normal and the ZIP4x5lights the LED on the Encrypt button continuously green.1. See section 10.6.6 on page 178 for details.

7. Special Functions 57If the device that you are calling cannot support encryption, the call will not complete. YourZIP4x5 plays the fast busy tone (congestion tone) and flashes the LED on the call appearancebutton and the Encrypt button green and red for 250 ms each color. The display changes to:The phone shows the call appearance number and the name, number, or address of the personyou were trying to call.The phone maintains this state until you go on hook.7.2.2.2 Receiving a Call When Encryption is Always On or Never OnIf your ZIP4x5 is configured so that encryption is always on and it receives a call from a devicethat has encryption always on, or if your ZIP4x5 is configured so that encryption is always offand it receives a call from a device that has encryption always off, your phone will answer thecall. The phone turns on the LED on the Encrypt button if encryption is engaged.If your ZIP4x5 is configured so that encryption is always on and it receives a call from a devicethat has encryption always off, or if your ZIP4x5 is configured so that encryption is always offand it receives a call from a device that has encryption always on, your phone will reject the call.The phone does not make any sound or light any LEDs. Your phone accumulates this as a missedcall (see section 9.4.4.3 on page 114). You can identify that the call was rejected as described insection 9.7.5 on page 124.7.2.2.3 Making a Call With Encryption Normally On or Normally OffWhen you enable encryption on the phone, it functions on each line independently. Thereforeyou can have an encrypted call with a person on one call appearance and a call that is notencrypted with another person on a different call appearance.To encrypt a call prior to dialling:•If the phone is configured so that encryption is normally off, press a free call appearancebutton then press the encrypt button.•If the phone is configured so that encryption is normally on, as soon as you start to make a callthe phone enables encryption.The phone flashes the LED on the call appearance button green and also flashes the LED on theEncrypt button synchronously. Dial the number using any of the methods that you can use for acall that is not encrypted.To encrypt a call that is already established, press the Encrypt button during the conversation.If the other person’s phone can accept encrypted voice the ZIP4x5 lights the LED on the Encryptbutton solid green but makes no change to the display.1. Encrypt Rejected4083280450

58ZIP4x5 User’s ManualIf the far end phone rejects the request to enable encryption, your ZIP4x5 beeps three timesthrough the audio channel you are using, and displays:The phone holds this display for two seconds, until you press a key, or go on hook.7.2.2.4 Answering a Call With Encryption Normally On or Normally OffYour phone automatically configures itself to engage or not engage encryption depending on therequest from the calling device. Your phone makes no sound and makes no change to the LCD. Itlights the LED on the Encrypt button continuously green if encryption is engaged.7.2.2.5 When the Other Party Turns on Encryption During a CallIf your phone has been configured to allow encryption, the phone immediately accepts theencryption request and lights the LED on the Encrypt button continuously. The speech is nowsecure. Your phone makes no sound and makes no change to the LCD. 7.2.2.6 When You Select to Turn Off EncryptionTo turn off encryption on a call prior to dialling:•If the phone is configured so that encryption is normally off, the phone does not attempt toencrypt the call when you initiate it.•If the phone is configured so that encryption is normally on, press a free call appearancebutton then press the encrypt button.If you turn off the encryption during a call, your phone turns off the LED on the Encrypt button.The speech is no longer encrypted and therefore not secure.If you try to turn off encryption and the other person is using a device that can accept onlyencrypted speech, the other device will reject the request and your phone flashes the LED on theencrypt button for two seconds (250 ms on and 250 ms off). The speech will remain encrypted andthereafter the LED on the Encrypt button remains lit continuously.7.2.2.7 When the Other Party Selects to Turn Off EncryptionIf the person with whom you are talking turns off the encryption, your phone beeps three timesthrough the audio channel that you are using, turns off the LED on the Encrypt button, anddisplays:The phone holds this display for two seconds, until you press a key, or go on hook.Warning:Encryption turnedoff by far end.Warning:Encryption turnedoff by far end.

7. Special Functions 597.2.3 Holding, Parking, Transferring, and Forwarding CallsWhen you put a call on hold or park it, the other person’s device now communicates with the callmanager system, whereas it previously communicated with your phone. Similarly, when youtransfer a call or forward a call, the other person’s device now communicates with someone else’sphone.In each of these cases the encryption policies of the devices have to be compatible or the call maybe dropped.For example, consider the case when you are speaking with a person who puts the call on hold:•If your phone is configured for normally on or normally off, it will adapt to the new speechpath coming from the phone system by either engaging or turning off encryption.•If your phone is configured for always on or never on, the phone system must supportencryption in the former case or must be able to establish communication without encryptionin the latter case. If the phone system cannot communicate with your phone, your phonerejects the call and your conversation is not placed on hold. Depending on the phone systemyour call may then be dropped or the phone system may reconnect you to the other person.If you put a call on hold successfully, the phone turns off the LED on the Encrypt button. If thephone system rejects the call and does not return the call to your phone, the call will be droppedand the ZIP4x5 will turn off the LED on the respective call appearance button.7.2.3.1 Transferring CallsTo transfer a call, you place the active call on hold, then dial the person that will receive the activecall, as described in section 9.5.3 on page 118. If encryption on each phone is set for normally onor normally off, the encryption state of the transferred call depends on your call to the person thatwill receive the transferred call. After placing the active call on hold:•if you call the person that will receive the active call with encryption on, then the transferredcall will be encrypted•if you call the person that will receive the active call with encryption off, then the transferredcall will not be encrypted.7.2.3.2 Forwarding CallsCall forwarding routes incoming calls to another destination, as described in section 7.5 on page65. If encryption on each phone is set for normally on or normally off, the encryption state of theforwarded call depends on the encryption setting of the phone initiating the call. 7.2.4 Conference Calls7.2.4.1 GeneralAll calls that comprise a conference call must be encrypted or not encrypted. You cannot mix callson a conference call that are encrypted or not encrypted because this makes the entire conferencesubject to eavesdropping and is therefore not secure.

60ZIP4x5 User’s ManualAfter you have set up the call with the first person, all subsequent calls added to the conferencemust be encrypted or not encrypted depending on whether the first call has encryption engagedor not. You can join other parties to the conference in the same way that you can you can joinparties for a conference that is not encrypted and as described in section 9.8.5 on page 128.7.2.4.2 Adding Other Parties to an Encrypted Conference CallIf you have established an encrypted call, you cannot add other calls to the conference that arenot encrypted:•If you place the conference on hold and make a call to another person, pressing the conferencebutton will have no effect and you cannot join the person to the call if that new call is notencrypted.•If you press the Conf key to select a new call appearance and then you call another party thatwill not support the request for encryption, your ZIP4x5 drops the call if it was not rejected bythe other party and shows:The phone shows the call appearance number and the name, number, or address of the personyou were trying to call. The phone holds this display for two seconds then reverts to theprevious display.•If you have one or more incoming calls and you press the Conf key to join those calls to theconference, your ZIP4x5 joins only those parties to the call that are encrypted. The phonecontinues to alert you that you for the call or calls that could not join the conference. You needto place the conference on hold to answer the other call or calls.7.2.4.3 Turning Off Encryption on a Conference CallThe other parties to a conference call cannot turn off encryption on the conference call. YourZIP4x5 will reject such a request. You can turn off encryption if all the devices that areparticipating in the conference have the encryption policy set to allow this.If you try to turn off encryption and one or more devices can accept only encrypted speech, theother device will reject the request and your phone flashes the LED on the encrypt button for twoseconds (250 ms on and 250 ms off). The speech will remain encrypted and thereafter the LED onthe Encrypt button remains lit continuously.7.3 User7.3.1 DescriptionThe functionality of User is dependent on the phone system. This function allows you to easilyassociate yourself with a phone that has not been assigned to you. It is useful if you visit anotherperson’s office or go to a common location and want to receive your phone calls. This is a quickway to create a feature sometimes referred to as “follow me.”3. Encrypt RejectedTechnical.Support

7. Special Functions 61The user feature also allows you to log in or out of an ACD group or an operator group.When you associate yourself with the phone, systems that support this feature will ringwhenever there is an incoming call for your SIP address or extension.When you press this button, the display changes to:This example shows five rows, though in practice the display can show only three rows at once.As you press Up and Down, the display scrolls through the list of choices. Press the Enter buttonto select a choice or the Esc button to cancel.7.3.2 Log InTo log into the phone do the following:1. Select User | Log in.2. The display changes to:3. Type the phone number of your extension. You must enter a numeric value and cannot enteryour user name. The Func key is disabled.4. Press the Enter button or the Down button.The display changes to:5. Type your system password (PIN) and press the Enter button. The display echoes the * character as you type your password.6. If you correctly typed the extension and password, the phone lights the LED on the Userbutton green continuously to indicate that one or more additional users are logged into thephone. When you use the headset, the same LED is lit continuously red.The phone displays whatever was being displayed prior to your pressing the User button.7. If the phone encounters an error, it displays one of the screens shown in section 7.9 on page71.Once you have logged yourself into the phone, the system can send calls to this phone as well asany other devices that you may have registered with it. User}Log inLog outLog into ACDLog out of ACDUser log inExtension }PasswordUser log inExtension 5001Password }

62ZIP4x5 User’s Manual7.3.3 Log OutWhen you move away from a phone that you have logged into, you should log out so that yourcalls are no longer sent to that phone. If you forget the log out, the phone’s owner can log you outbecause you do not need a password to log out.To log out of a phone, do the following:1. Select User | Log out.2. The display changes to:The display shows the names of all the users who have temporarily logged into the phone.If more than one user has logged into the phone, the phone displays “all” as the firstselection.3. Use the Up and Down buttons to select the individual you want to log out, or select “all” tolog out all users, and press the Enter button.4. The phone ceases to light the LED on the User button green continuously if there are noother additional users logged into the phone and no user is logged into an ACD group oroperator group. When you use the headset, the same LED is lit continuously red.5. If there were no users logged into the ZIP4x5, the display shows instead:When you press any key, the phone displays the idle screen.7.3.4 Log Into ACD or Operator GroupThis function is used to log in as an agent or an operator. When you select this menu item, youcan join the group without necessarily logging into the phone as an individual.To log into the phone as an agent or operator do the following:1. Select User | Log into group.2. The display changes to:At this point, the phone cannot accept any new calls until you exit the group log in.3. Type the phone number of the ACD group or operator group you want to join.4. Press the Enter button or Down.User log out}allLancelot CapabilityUser log outNo user is logged inGroup log inGroup number } Extension

7. Special Functions 63The display changes to:5. Type the phone number of your extension. You must enter a numeric value and cannot enteryour user name. The Func key is disabled.6. Press the Enter button or the Down button.The display changes to:7. Type your system password (PIN) and press the Enter button. The display echoes the * character as you type your password.8. If you correctly typed the extension and password, the phone lights the LED on the Userbutton green continuously to indicate that one or more additional users are logged into thephone. When you use the headset, the same LED is lit continuously red.The phone displays whatever was being displayed prior to your pressing the User button.9. If the phone encounters an error, it displays one of the screens shown in section 7.9 on page71.Once you have logged yourself into the phone, your system will send calls to this phone as wellas any other devices that you may have registered with it.7.3.5 Agents Operating Without a PCAgents can function as part of an ACD group by using the ZIP4x5 phone. The phoneautomatically supports the following presence states:•logged out•available•activeWhen an agent wishes to take a break, he or she should log out of the ACD group and log back inwhen available again. The phone does not support wrap up, so a new call can be presented to theagent immediately after the end of a previous call.7.3.6 Log Out of ACD or Operator GroupWhen you move away from a phone that you have logged into as an operator or agent, youshould log out so that your calls are no longer sent to that phone. If you forget to log out, thephone’s owner can log you out because you do not need a password to log out.Group log inGroup number 1805Extension }Group log inExtension 1854Password }

Navigation menu