Damm Cellular Systems A S 104012 410 MHZ TRANSCEIVER MODULE User Manual Note to installers to be placed in
Damm Cellular Systems A/S 410 MHZ TRANSCEIVER MODULE Note to installers to be placed in
Contents
- 1. User Manual - 1
- 2. User manual - 2
- 3. User Manual - 3
- 4. User Manual - 4
- 5. Warning statements for user's manual
- 6. Notes to installer for user manual
- 7. Revised pages 4 and 5 of the user's manual 11 01 2012
- 8. User addendum 4 carrier 11 01 12
- 9. User addendum 8 carrier 11 01 2012
- 10. Note to installers to be placed in user manual
Note to installers to be placed in user manual
![Note To Installers Power limitations with respect to 47 CFR part 90.279 or 90.205(g). This FCC rule part limits the total effective radiated power depending on height above average terrain or effective antenna height (EAH). The table in these 2 rule parts 90.279 and 90.205(g) allows for ERP powers in the range of 250 W ERP to 5 W ERP depending on the height EAH. The gain of the antenna used, coax cable losses, and power output setting of the transmitter must be accounted for in your calculations. A separate calculation for RF exposure separation distance is also required. Please be careful in the calculation of the power levels and antenna gains and coax cable losses in respect to the proper license requirements for the channels listed in you licenses. It is the responsibility of the licensee/ installer to see that the conditions of the license are met. It is a violation of FCC rules to operate a manner contrary to the terms of the license.](https://usermanual.wiki/Damm-Cellular-Systems-A-S/104012.Note-to-installers-to-be-placed-in-user-manual/User-Guide-1864758-Page-1.png)