Samsung Electronics Co SLM4530NX Printer User Manual english

Download:
Mirror Download [FCC.gov]
Document ID	2436783
Application ID	4vRB0XXv8GE+DGJEP+3JeQ==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	310.52kB (3881494 bits)
Date Submitted	2014-11-05 00:00:00
Date Available	2014-11-05 00:00:00
Creation Date	2014-11-05 20:34:14
Producing Software	Acrobat Distiller 10.1.10 (Windows)
Document Lastmod	2014-11-05 20:34:29
Document Title	english.book
Document Creator	FrameMaker 8.0
Document Author:	yj0410.choi

Cleaning the machine
If printing quality problems occur or if you use your machine in a dusty enviroment, you need to clean your machine regularly to keep it in the best printing condition
and use your machine longer.
• Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances can discolor or distort the
cabinet.
• If your machine or the surrounding area is contaminated with toner, we recommend you use a cloth or tissue dampened with water to clean it. If you use a vacuum
cleaner, toner blows in the air and might be harmful to you.
Cleaning the outside
Clean the machine cabinet with a soft, lint-free cloth. Dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine.
10
Cleaning the inside
During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks
or smearing. Cleaning the inside of the machine clears and reduces these problems.
Use a dry lint free cloth when cleaning the inside of the machine, be careful not to damage the transfer roller or any other inside parts. Do not use solvents such as
benzene or thinner. Printing quality problems can occur and cause damage to the machine.
3. Maintenance
76
Cleaning the machine
3. Maintenance
77
Cleaning the machine
3. Maintenance
78
Cleaning the machine
11
Cleaning the pickup roller
3. Maintenance
79
Tips for moving & storing the machine
The warranty does not cover damage from falls or impacts due to the intentional or unintentional actions of the user.
•
When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to
the machine or reduce print quality.
•
When moving the machine, make sure at least two people are holding the machine securely.
3. Maintenance
80
4. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
• Tips for avoiding paper jams
82
• Clearing paper jams
83
• Understanding the status LED
94
• Understanding display messages
96
• This chapter gives helpful information about what to do when you encounter an error. If
your machine has a display screen, check the message on the display screen first to solve.
• If you cannot find a solution to your problem in this chapter, refer to the Troubleshooting
chapter in the Advanced Guide (see "Troubleshooting" on page 255).
• If you cannot find a solution in the User's Guide or the problem persists, call for service.
Tips for avoiding paper jams
By selecting the correct medias, most paper jams can be avoided. To avoid paper jams, refer to the following guidelines:
•
Ensure that the adjustable guides are positioned correctly (see "Tray overview" on page 37).
•
Do not remove paper from the tray while your machine is printing.
•
Flex, fan, and straighten paper before loading.
•
Do not use creased, damp, or highly curled paper.
•
Do not mix papers in a tray.
•
Use only recommended print media (see "Print media specifications" on page 107).
4. Troubleshooting
82
Clearing paper jams
To avoid tearing the paper, pull the jammed paper out slowly and gently.
In tray1
Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page 17).
4. Troubleshooting
83
Clearing paper jams
In optional tray
• Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page
17).
• This troubleshooting may not be available depending on model or optional goods (see "Variety feature" on page 8).
4. Troubleshooting
84
Clearing paper jams
If you do not see the paper in this area, stop and go to next step:
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting
85
Clearing paper jams
In the multi-purpose tray
4. Troubleshooting
86
Clearing paper jams
Inside the machine
The Fuser area is HOT, please wait until device cools down before accessing this area. Turn power off to cool the machine down. Take care when removing paper
from the machine.
Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page 17).
4. Troubleshooting
87
Clearing paper jams
4. Troubleshooting
88
Clearing paper jams
If you do not see the paper in this area, stop and go to next step:
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting
89
Clearing paper jams
In the exit area
The Fuser area is HOT, please wait until device cools down before accessing this area. Turn power off to cool the machine down. Take care when removing paper
from the machine.
4. Troubleshooting
90
Clearing paper jams
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting
91
Clearing paper jams
In the duplex unit area
4. Troubleshooting
92
Clearing paper jams
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting
93
Understanding the status LED
The color of the LED indicates the machine's current status.
• Some LEDs may not be available depending on model or country (see "Control panel overview" on page 19).
• To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Understanding display messages" on page 96).
• You also can resolve the error with the guideline from the computer’s Samsung Printing Status program window (see "Using Samsung Printer Status" on page
247).
• If the problem persists, call a service representative.
LED
Status
Off
Description
The machine is off-line.
Blinking
When the backlight blinks, the machine is receiving or printing data.
On
• The machine is on-line and can be used.
Blue
• A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message. When
the problem is cleared, the machine resumes.
Blinking
) Status
• Small amount of toner is left in the cartridge. The estimated cartridge lifea. of toner is close. Prepare a new cartridge
for replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing
toner" on page 65).
• A toner cartridge has almost reached its estimated cartridge lifea. It is recommended to replace the toner cartridge (see
"Replacing the toner cartridge" on page 67).
Red
• The cover is opened. Close the cover.
On
• There is no paper in the tray when receiving or printing data. Load paper in the tray.
• The machine has stopped due to a major error. Check the display message (see "Understanding display messages" on
page 96).
• A paper jam has occurred (see "Clearing paper jams" on page 83).
4. Troubleshooting
94
Understanding the status LED
LED
) Power
Status
Description
On
The machine is in power save mode.
Off
The machine is in ready mode or machine’s power is off.
Blue
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages
may be affected by operating environment, percentage of image area, printing interval, graphics, media and media size.
4. Troubleshooting
95
Understanding display messages
Messages appear on the control panel display to indicate the machine’s status
or errors. Refer to the tables below to understand the messages’ and their
meaning, and correct the problem, if necessary.
• You can resolve the error with the guideline from the computer’s
Printing Status program window (see "Using Samsung Printer Status" on
page 247).
• If a message is not in the table, reboot the power and try the printing job
again. If the problem persists, call a service representative.
Message
Paper has jammed in the
exit area.
Clear the jam (see "In the
exit area" on page 90).
• Jam inside of
machine
Paper has jammed in the
inside machine.
Clear the jam (see "Inside
the machine" on page
87).
Paper jam in tray
Paper has jammed in the
tray.
Clear the jam (see "In
tray1" on page 83).
• Paper jam in tray 2
Paper has jammed in the
optional tray.
Clear the jam (see "In
optional tray" on page
84).
Paper has jammed in the
multi-purpose tray.
Clear the jam (see "In the
multi-purpose tray" on
page 86).
• Paper jam in tray 3
• Some messages may not appear on the display depending on the
options or models.
• Paper jam in tray 5
• [tray type] indicates the tray number.
Suggested solutions
• Jam in exit area
• When you call for service, provide the service representative with the
contents of display message.
• [error number] indicates the error number.
Meaning
• Paper jam in tray 4
Paper jam in MP tray
• [color] indicates the color of toner.
Paper Jam-related messages
Message
Meaning
Suggested solutions
• Jam inside of duplex Paper has jammed during Clear the jam (see "In the
duplex printing. This is
duplex unit area" on page
• Jam bottom of
applicable only to
92).
duplex
machines with this feature.
4. Troubleshooting
96
Understanding display messages
Message
Toner-related messages
Message
• Replace new toner
• End of life, Replace
with new toner
cartridge
• Replace IMG. unit
• End of life, Replace
with new imaging
unit
• Error: [error
number]
Meaning
Replace the toner cartridge
The indicated toner
cartridge has reached with a Samsung- genuine toner
its estimated
cartridgea (see "Replacing the
toner cartridge" on page 67).
cartridge lifeb.
The indicated
imaging unit has
reached its estimated
imaging unit lifeb.
The imaging unit is
not installed.
• Imaging Unit
Failure: [error
number]. Install
imaging unit again
• Error: [error
number]
• Imaging unit
Failure: [error
number]. Call for
service
Suggested solutions
There is a problem in
the imaging unit.
Replace the imaging unit with a
Samsung-genuine imaging
unit (see "Replacing the
imaging unit" on page 69).
Install the imaging unit. If it is
already installed, try to reinstall
the imaging unit. If the problem
persists, call for service.
Turn the machine off and back
on again. If the problem
persists, call for service.
Meaning
Suggested solutions
• Prepare new toner
The estimated
• Prepare new toner
cartridge
cartridge lifeb of
toner is close.
• Prepare IMG. unit
The estimated
imaging unit life of
toner is close.
Prepare a new imaging unit for
a replacement (see "Replacing
the imaging unit" on page 69).
Small amount of
toner is left in the
indicated cartridge.
You may temporarily increase
the printing quality by
redistributing the toner (see
"Redistributing toner" on page
65).
The toner cartridge is
not installed.
Install the toner cartridge. If it is
already installed, try to reinstall
the toner cartridge. If the
problem persists, call for
service.
• Prepare new
imaging unit
• Shake toner cart.
• Shake toner
cartridge and then
install. Replace
toner cartridge if
the problem
persists
• Error: [error
number]
• Toner Cartridge
Failure: [error
number]. Install
toner cartridge
again
Prepare a new cartridge for a
replacement. You may
temporarily increase the
printing quality by
redistributing the toner (see
"Redistributing toner" on page
65).
4. Troubleshooting
97
Understanding display messages
Message
Meaning
• Toner Not Installed The toner cartridge is
not installed.
• Toner cartridge is
Suggested solutions
Reinstall the toner cartridge.
• Imaging unit is not
installed. Install
the unit
• Error: [error
number]
• Toner cartridge is
not compatible.
Check users guide
• IMG. Not
Compatible
• Imaging unit is not
compatible. Check
guide
Suggested solutions
• Replace new toner
The indicated toner
cartridge has almost
reached its estimated
Replace the toner cartridge for
the best print quality when this
message appears. Using a
cartridge beyond this stage can
result in printing quality issues
(see "Replacing the toner
cartridge" on page 67).
cartridge lifeb.
The imaging unit is
not installed.
Reinstall the imaging unit two
or three times. If the problem
persists, call for service.
There is a problem in
the toner cartridge.
Turn the machine off and back
on again. If the problem
persists, call for service.
• Toner Cartridge
Failure: [error
number]. Call for
service
• Toner Not
Compatible
Meaning
• Replace with new
toner cartridge
not installed.
Install the
cartridge
• IMG. Not Installed
Message
If the machine stops printing,
replace the toner cartridge (see
"Replacing the toner cartridge"
on page 67).
• Replace IMG. unit
• Replace with new
imaging unit
The indicated
imaging unit has
almost reached its
estimated imaging
unit lifeb.
The toner cartridge
Install a Samsung-genuine
you have installed is toner cartridge, designed for
not for your machine. your machine (see "Available
consumables" on page 60).
The imaging unit you
have installed is not
for your machine.
Install a Samsung-genuine
imaging unit, designed for your
machine (see "Available
consumables" on page 60).
• Remove seal tape
• Did not supply
enough toner.
Remove seal tape
of toner cartridge
or shake it. Call for
service if the
problem persists
The seal tape of the
toner cartridge is not
removed
Replace the imaging unit for
the best print quality when this
message appears. Using a
imaging unit beyond this stage
can result in printing quality
issues (see "Replacing the
imaging unit" on page 69).
Remove the seal tape of the
toner cartridge (see "Replacing
the toner cartridge" on page
67).
4. Troubleshooting
98
Understanding display messages
a. When the toner cartridge has reached its end of life, the machine will stop printing. In this
case, you can choose to stop or continue printing from the SyncThru™Web Service. (Settings
> Machine Settings > System > Setup > Supplies Management > Toner Cartridge Stop)
or Samsung Easy Printer Manager (Device Settings > System > Supplies Management >
Toner Cartridge Stop). Turning off this option and continuing to print may damage the
device's system.
b. Estimated cartridge life means the expected or estimated cartridge, which indicates the
average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of
pages may be affected by the percentage of image area, operating environment, printing
interval, media type and media size.
Samsung does not recommend using a non-genuine Samsung toner
cartridge such as refilled or remanufactured. Samsung cannot guarantee a
non-genuine Samsung toner cartridge's quality. Service or repair required
as a result of using non-genuine Samsung toner cartridges will not be
covered under the machine warranty.
Message
Meaning
Suggested solutions
There is no paper in all
tray.
Load paper in the tray (see
"Loading paper in the tray"
on page 38).
There is no paper in the
multi-purpose tray.
Load paper in the multipurpose tray (see "Multipurpose tray" on page 41).
• [tray type] paper
mismatch
The paper sizespecified
in the printerproperties
does notmatch the
paper youare loading.
You can select the option
between Continue or
Cancel. If you select Cancel
, the printing job will stop.
Load the correct paper in
the tray. If you select
Continue, printing job will
continue.
• [tray type] cassette
Out
The tray is not securely
latched
Close the tray until it locks
into place. If the problem
persists, call for service.
• Paper Empty in all
trays
• Paper is empty in all
tray. Load paper
• Paper Empty in MP
tray
• Paper is empty in MP
tray. Load paper
• Paper mismatch
[tray type]
Tray-related messages
Message
• Output bin is full
• Paper in output bin
is full. Remove
printed paper
Meaning
The output tray is full.
Suggested solutions
Remove papers from the
output tray, the machine
resumes printing. If the
problem persists, call for
service.
• [tray type] cassette
is pulled out. Insert it
properly
4. Troubleshooting
99
Understanding display messages
10
Message
• Error: [error
number]
Meaning
There is a problem in
the tray.
• Input System Failure
[error number].
Check [tray type]
connection
• Error: [error
number]
Network-related messages
Check the tray connection. If
the problem persists, call for
service.
Message
• IP Conflict
There is a problem in
the tray.
• Input System Failure
[error number] : Pull
[tray type] out and
insert it
• Paper Low in [tray
type]
Suggested solutions
• This IP address
conflicts with that of
other system. Check
it
Open and close the tray. If
the problem persists, call for
service
• 802.1x Network
Error
Running out of paper
in the tray.
Load paper in the tray.
There is no paper in the
tray.
Load paper in the tray.
• Paper is empty in
[tray type]. Load
paper
Suggested solutions
The IP address is used
elsewhere.
Check the IP address or
obtain a new IP address.
Fail to authenticate.
Check the network
authentication protocol. If
the problem persists,
contact your network
administrator.
• 802.1x
authentication
failed. Please
contact the system
administrator
• Paper is low in [tray
type]. Load paper
• Paper Empty in [tray
type]
Meaning
11
Misc. messages
Message
• Front door is open.
Close it
Meaning
The cover is not securely
latched.
Suggested solutions
Close the cover until it
locks into place.
• Rear door is open.
Close it
4. Troubleshooting
100
Understanding display messages
Message
Meaning
Suggested solutions
Message
Meaning
Suggested solutions
• Error: [error number]
There is a problem in the
engine system.
Unplug the power cord
and plug it back in. If the
problem persists, call for
service.
• Error: [error number]
There is a problem in the
HDD system.
Reboot the power. If the
problem persists, please
call for service.
There is a problem in the
fuser unit.
Reboot the power. If the
problem persists, please
call for service.
• Error: [error number]
There is a problem in the
LSU.
Reboot the power. If the
problem persists, please
call for service.
There is a problem in the
motor system.
Reboot the power. If the
problem persists, please
call for service.
• Error: [error number]
There is a problem in the
fan system.
Reboot the power. If the
problem persists, please
call for service.
There is a problem in the
HDD system.
Reboot the power. If the
problem persists, please
call for service.
• Error: [error number]
There is a problem in the
sensor.
Reboot the power. If the
problem persists, please
call for service.
• Engine System
Failure: [error
number]. Call for
service if the problem
persists
• Error: [error number]
• Fuser Failure: [error
number]. Turn off
then on. Call for
service if the problem
persists
• Error: [error number]
• Motor Failure: [error
number]. Turn off
then on. Call for
service if the problem
persists
• Error: [error number]
• MSOK System Failure:
[error number]. Call
for service
• HDD System Failure:
[error number]. Turn
off then on. Call for
service if the problem
persists
• LSU Failure: [error
number]. Turn off
then on. Call for
service if the problem
persists
• Fan Failure: [error
number]. Turn off
then on. Call for
service if the problem
persists
• Sensor Failure: [error
number]. Turn off
then on. Call for
service if the problem
persists
4. Troubleshooting
101
Understanding display messages
Message
Meaning
Suggested solutions
• Error: [error number]
There is a problem in the
lamp.
Reboot the power. If the
problem persists, please
call for service.
The machine is in a
room with improper
room temperature.
Move the machine to a
room with proper room
temperature (see
"Specifications" on page
105).
The life of the fuser unit
has expired.
Replace the fuser unit
with a new one. If the
problem persists, please
call for service.
• Lamp Failure: [error
number]. Turn off
then on. Call for
service if the problem
persists
• Not proper Room
Temp
• The room
temperature is not
suitable for this set
use. Please adjust
room temperature
• Replace fuser unit
• Replace with new
fuser unit
4. Troubleshooting
102
5. Appendix
This chapter provides product specifications and information concerning applicable regulations.
• Specifications
105
• Regulatory information
115
• Copyright
126
Specifications
General specifications
The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information.
Items
Description
Dimensiona
Width x Length x Height
433 x 460 x 368 mm (17.05 x 18.11 x 14.49 inches)
Weighta
Machine with consumables
28 kg (61.73 Ibs)
Noise Levelb c
Ready mode
Less than 30 dB (A)
Print mode
Less than 54 dB (A)
Operation
10 to 30°C (50 to 86 °F)
Storage (packed)
-20 to 40°C (-4 to 104 °F)
Operation
20 to 80% RH
Storage (packed)
10 to 90% RH
110 volt models
AC 110 - 127 V
220 volt models
AC 220 - 240 V
Temperature
Humidity
Power ratingd
5. Appendix
105
Specifications
Items
Power consumptione
a.
b.
c.
d.
e.
f.
Description
Average operating mode
Less than 850 W
Ready mode
Less than 16W
Power save mode
Less than 1.5 W
Power off modef
Less than 0.45 W
Dimensions and weight are measured without other accessories.
Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing.
China only: If the equipment's noise is louder than 63 db (A), the equipment should be placed in region of relatively independent advice.
See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine.
The power consumption may be affected by the machine’s status, setting conditions, operating environment, and measuring equipment and method the country uses.
Power consumption can be completely avoided only when the power cable is not connected.
5. Appendix
106
Specifications
Print media specifications
Type
Size
print media weighta/Capacityb
Dimensions
Tray1 / Optional tray
Multi-purpose tray
Letter
216 x 279 mm (8.5 x 11 inches)
70 to 90 g/m2 (19 to 24 lb bond)
70 to 90 g/m2 (19 to 24 lb bond)
Legal
216 x 356 mm (8.5 x 14 inches)
• 550 sheets of 75 g/m2 (20 lb bond)
• 100 sheets of 75 g/m2 (20 lb bond)
US Folio
216 x 330 mm (8.5 x 13 inches)
A4
210 x 297 mm (8.26 x 11.69 inches)
Oficio
216 x 343 mm (8.5 x 13.5 inches)
JIS B5
182 x 257 mm (7.16 x 10.11 inches)
ISO B5
176 x 250 mm (6.93 x 9.84 inches)
Executive
184 x 267 mm (7.25 x 10.5 inches)
A5
148 x 210 mm (5.82 x 8.26 inches)
Statement
140 x 216 mm (5.5 x 8.5 inches)
A6
105 x 148 mm (4.13 x 5.82 inches)
Not available in optional tray.
Index Card
76 x 127 mm (3.00 x 5.00 inches)
Not available in tray1/optional tray.
Postcard 4 x 6
102 x 152 mm (4.00 x 6.00 inches)
Not available in optional tray.
Postcard 100 x 148
100 x 148 mm (3.94 x 5.83 inches)
Not available in optional tray.
Plain paper
5. Appendix
107
Specifications
Type
Size
print media weighta/Capacityb
Dimensions
Tray1 / Optional tray
Multi-purpose tray
Envelope Monarch
98 x 191 mm (3.87 x 7.5 inches)
75 to 90 g/m2 (20 to 24 lb bond)
75 to 90 g/m2 (20 to 24 lb bond)
Envelope No. 9
98 x 225 mm (3.87 x 8.87 inches)
• 50 sheets of 75 g/m2 (20 lb bond)
• 10 sheets of 75 g/m2 (20 lb bond)
Envelope No. 10
105 x 241 mm (4.12 x 9.5 inches)
Envelope DL
110 x 220 mm (4.33 x 8.66 inches)
Envelope C5
162 x 229 mm (6.37 x 9.01 inches)
75 to 90 g/m2 (20 to 24 lb bond)
Envelope C6
114 x 162 mm (4.48 x 6.38 inches)
• 50 sheets of 75 g/m2 (20 lb bond)
Thick paperd e
Refer to the Plain paper
section
Refer to the Plain paper section
91 to 120 g/m2 (24 to 32 lb bond)
90 to 120 g/m2 (24 to 32 lb bond)
Thicker paper
Refer to the Plain paper
section
Refer to the Plain paper section
Not available in tray1/optional tray.
164 to 220 g/m2 (44 to 59 lb bond)
Thin paper
Letter, Legal, Oficio, US
Folio, A4, JIS B5, ISO B5,
Executive, A5,
Statement
Refer to the Plain paper section
60 to 69 g/m2 (16 to 19 lb bond)
60 to 69 g/m2 (16 to 19 lb bond)
• 550 sheets
• 100 sheets
Letter, Legal, Oficio, US
Folio, A4, JIS B5, ISO B5,
Executive, A5, A6,
Statement
Refer to the Plain paper section
120 to 150 g/m2 (32 to 40 lb bond)
120 to 150 g/m2 (32 to 40 lb bond)
• 50 sheets
• 10 sheets
Refer to the Plain paper
section
Refer to the Plain paper section
121 to 163 g/m2 ( 32 to 43lb bond)
121 to 163 g/m2 ( 32 to 43lb bond)
• 50 sheets
• 10 sheets
Envelopec
Labelsf g
Card stockd
5. Appendix
108
Specifications
Type
Size
print media weighta/Capacityb
Dimensions
Tray1 / Optional tray
Multi-purpose tray
Recycled
Letter, Legal, Oficio, US
Folio, A4, JIS B5, ISO B5,
Executive, A5,
Statement
Refer to the Plain paper section
60 to 90 g/m2 ( 16 to 24 lb bond)
60 to 90 g/m2 ( 16 to 24 lb bond)
Preprinted
Letter, Legal, Oficio, US
Folio, A4, JIS B5, ISO B5,
Executive, A5,
Statement
Refer to the Plain paper section
75 to 90 g/m2 ( 20 to 24 lb bond)
75 to 90 g/m2 ( 20 to 24 lb bond)
Bond
Letter, Legal, Oficio, US
Folio, A4, JIS B5, ISO B5,
Executive, A5,
Statement
Refer to the Plain paper section
105 to 120 g/m2 ( 28 to 32 lb bond)
105 to 120 g/m2 ( 28 to 32 lb bond)
Colored,
Letter, Legal, Oficio, US
Cotton,
Folio, A4, JIS B5, ISO B5,
Punched Paper Executive, A5,
Statement
Refer to the Plain paper section
75 to 90 g/m2 (20 to 24 lb bond)
75 to 90 g/m2 (20 to 24 lb bond)
Letter, Legal, Oficio, US
Folio, A4, JIS B5, ISO B5,
Executive, A5,
Statement
Refer to the Plain paper section
75 to 90 g/m2 (20 to 24 lb bond)
75 to 90 g/m2 (20 to 24 lb bond)
Letterheadg
5. Appendix
109
Specifications
Type
Size
print media weighta/Capacityb
Dimensions
Tray1 / Optional tray
Letter, Legal, US Folio,
A4, JIS B5, ISO B5,
Executive, A5,
Statement, PostCard 4
x 6, PostCard 100 x 148
Refer to the Plain paper section
75 to 90 g/m2 ( 20 to 24 lb bond)
Minimum size (custom)
76.2 x 127 mm (3 x 5 inches)
60 to 163 g/m2 (16 to 43 lb bond)
Maximum size (custom)
216 x 356 mm (8.5 x 14 inches)
Archivee
a.
b.
c.
d.
e.
f.
g.
Multi-purpose tray
75 to 90 g/m2 ( 20 to 24 lb bond)
If media weight is over 105 g/m2 (28 lb bond), load a paper into the tray one by one.
Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
Envelope Monarch and Envelope C6 are not supported for optional tray.
Index Card is supported only multi-purpose tray.
A6, PostCard 4 x 6, and PostCard 100 x 148 are not supported for optional tray.
Smoothness: 100 to 250 (sheffield)
A6 is supported only multi-purpose tray/tray1.
5. Appendix
110
Specifications
System requirements
Microsoft® Windows®
Requirement (recommended)
Operating system
CPU
RAM
free HDD space
Windows® XP
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (256 MB)
1.5 GB
Windows Server® 2003
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (512 MB)
1.25 GB to 2 GB
Windows Server® 2008
Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz)
512 MB (2 GB)
10 GB
Windows Vista®
Intel® Pentium® IV 3 GHz
512 MB (1 GB)
15 GB
Windows® 7
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
1 GB (2 GB)
16 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
• DVD-R/W Drive
Windows Server® 2008 R2
Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster)
512 MB (2 GB)
10 GB
Windows® 8
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
2 GB
20 GB
Windows® 8.1
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
512 MB (2 GB)
32 GB
• DVD-R/W Drive
Windows Server® 2012
Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster)
Windows Server® 2012 R2
5. Appendix
111
Specifications
• Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.
• Users who have administrator rights can install the software.
• Windows Terminal Services is compatible with your machine.
Mac
Requirements (Recommended)
Operating system
CPU
Mac OS X 10.5
• Intel® processors
RAM
Free HDD space
512 MB (1 GB)
1 GB
• 867 MHz or faster Power PC G4/G5
Mac OS X 10.6
• Intel® processors
1 GB (2 GB)
1 GB
Mac OS X 10.7 - 10.9
• Intel® processors
2 GB
4 GB
5. Appendix
112
Specifications
Linux
Items
Requirements
RedHat® Enterprise Linux 5, 6
Fedora12, 13, 14, 15, 16, 17, 18, 19, 20
OpenSuSE® 11.2, 11.3, 11.4, 12.1, 12.2, 12.3, 13.1
Operating system
Ubuntu 10.04, 10.10, 11.04, 11.10, 12.04, 12.10, 13.04, 13.10, 14.04
SuSE Linux Enterprise Desktop 10, 11
Debian 6, 7
Mint 13, 14, 15, 16
CPU
Pentium IV 2.4GHz (Intel Core™2)
RAM
512 MB (1 GB)
Free HDD space
1 GB (2 GB)
Unix
Items
Requirements
Sun Solaris 9, 10, 11 (x86, SPARC)
Operating system
HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)
IBM AIX 5.1, 5.2, 5.3, 5.4, 6.1 7.1 (PowerPC)
Free HDD space
Up to 100 MB
5. Appendix
113
Specifications
Network environment
Network and wireless models only (see "Features by model" on page 7).
You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the
machine.
Items
Network interface
Specifications
• Ethernet 10/100/1000 Base-TX Wired Lan
Network operating system
• Network Interface 802.11b/g/n wireless LAN & Near Field Communication(NFC)a
• Windows® XP, Windows Server® 2003, Windows Vista®, Windows® 7, Windows® 8, Windows Server® 2008 R2
• Various Linux OS
• Mac OS X 10.5 -10.9
Network protocols
• UNIX OS
• TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD, AirPrint, Google Cloud Print, ThinPrint
• SNMPv 1/2/3, HTTP, IPSec
Wireless security
• TCP/IPv6 (DHCP, DNS, Standard TCP/IP Printing, LPR, SNMPv 1/2/3, HTTP, IPSec)
• Authentication: Open System, Shared Key, WPA-Enterprise/ Personal, WPA2-Enterprise/Personal
• Encryption: WEP64, WEP128, TKIP, AES
a. Optional device.
5. Appendix
114
Regulatory information
This machine is designed for a normal work environment and certified with
several regulatory statements.
When using this product, these basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to persons:
Laser safety statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21
CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is
certified as a Class I laser product conforming to the requirements of IEC 608251 : 2007.
Class I laser products are not considered to be hazardous. The laser system and
printer are designed so there is never any human access to laser radiation above
a Class I level during normal operation, user maintenance or prescribed service
condition.
Warning
Never operate or service the printer with the protective cover removed from
laser/scanner assembly. The reflected beam, although invisible, can damage
your eyes.
5. Appendix
115
Regulatory information
Ozone safety
Recycling
This product’s ozone emission rate is under 0.1 ppm. Because
ozone is heavier than air, keep the product in a place with good
ventilation.
Recycle or dispose of the packaging material for this product in an
environmentally responsible manner.
Power saver
China only
This printer contains advanced energy conservation technology
that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of
time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR program see http://
www.energystar.gov
For ENERGY STAR certified models, the ENRGY STAR label will be on
your machine. Check if your machine is ENERGY STAR certified.
;SUHVV01'01;
Website: http://www.samsung.com/cn/support/location/
supportServiceLocation.do?page=SERVICE.LOCATION
5. Appendix
116
Regulatory information
10
Correct disposal of this product (Waste electrical &
electronic equipment)
(The United States of America only)
Dispose unwanted electronics through an approved recycler. To find the nearest
recycling location, go to our website: www.samsung.com/recyclingdirect Or
call, (877) 278 - 0799
(Applicable in countries with separate collection systems)
11
State of California Proposition 65 Warning (US Only)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these
items from other s of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
12
Radio frequency emissions
FCC information to the user
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference
that may cause undesired operation.
5. Appendix
117
Regulatory information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or experienced radio TV technician for help.
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
Canadian radio interference regulations
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and
Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la norme sur le
matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et
Sciences Canada.
13
United States of America
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. This section is only applicable if these devices are present.
Refer to the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the
United States of America if an FCC ID number is on the system label.
5. Appendix
118
Regulatory information
The FCC has set a general guideline of 20 cm (8 inches) separation between the
device and the body, for use of a wireless device near the body (this does not
include extremities). This device should be used more than 20 cm (8 inches)
from the body when wireless devices are on. The power output of the wireless
device (or devices), which may be embedded in your printer, is well below the
RF exposure limits as set by the FCC.
FCC Statement for Wireless LAN use:
While installing and operating this transmitter and antenna combination
the radio frequency exposure limit of 1 mW/cm2 may be exceeded at
distances close to the antenna installed. Therefore, the user must maintain
a minimum distance of 20 cm from the antenna at all times. This device
cannot be collocated with another transmitter and transmitting antenna.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device.
14
Russia / Kazakhstan / Belaru only
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it.
Contact manufacturer for service.
5. Appendix
119
Regulatory information
15
18
Germany only
Replacing the Fitted Plug (for UK Only)
Important
16
Turkey only
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug
and has a 13 amp fuse. When you change or examine the fuse, you must re-fit
the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost
the fuse cover, do not use the plug until you have another fuse cover.
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug
sockets. You need to buy a suitable plug adaptor. Do not remove the moulded
plug.
17
Thailand only
This telecommunication equipment conforms to NTC technical requirement.
If you cut off the moulded plug, get rid of it straight away.You cannot rewire
the plug and you may receive an electric shock if you plug it into a socket.
5. Appendix
120
Regulatory information
Important warning:
19
Declaration of conformity (European countries)
You must earth this machine.
The wires in the mains lead have the following color code:
Approvals and Certifications
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do
the following:
You must connect the green and yellow wire to the pin marked by the letter “E”
or by the safety ‘Earth symbol’ or colored green and yellow or green.
Hereby, Samsung Electronics, declares that this [C2620x series] is in
compliance with the essential requirements and other relevant
provisions of R&TTE Directive 1999/5/EC.
The declaration of conformity may be consulted at
www.samsung.com, go to Support > Download center and enter
your printer (MFP) name to browse the EuDoC.
You must connect the blue wire to the pin which is marked with the letter “N” or
colored black.
January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of
the member states related to low voltage equipment.
You must connect the brown wire to the pin which is marked with the letter “L”
or colored red.
January 1, 1996: Council Directive 2004/108/EC, approximation of the laws of
the Member States related to electromagnetic compatibility.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity. A full declaration, defining the relevant Directives and referenced
standards can be obtained from your Samsung Electronics Co., Ltd.
representative.
5. Appendix
121
Regulatory information
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal
Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European
single terminal connection to the analogue public switched telephone network
(PSTN) in accordance with Directive 1999/5/EC. The product has been designed
to work with the national PSTNs and compatible PBXs of the European
countries:
European radio approval information (for products
fitted with EU-approved radio devices)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz band, may be present
(embedded) in your printer system which is intended for home or office use. This
section is only applicable if these devices are present. Refer to the system label
to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark is on the
system label.
In the event of problems, you should contact the Euro QA Lab of Samsung
Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application
of terminal equipment which complies with this standard, the European
Telecommunication Standards Institute (ETSI) has issued an advisory document
(EG 201 121) which contains notes and additional requirements to ensure
network compatibility of TBR21 terminals. The product has been designed
against, and is fully compliant with, all of the relevant advisory notes contained
in this document.
The power output of the wireless device or devices that may be embedded in
your printer is well below the RF exposure limits as set by the European
Commission through the R&TTE directive.
European states qualified under wireless approvals:
EU countries
European states with restrictions on use:
EU
EEA/EFTA countries
No limitations at this time
5. Appendix
122
Regulatory information
20
Regulatory compliance statements
Wireless guidance
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. The following section is a general overview of
considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in
the specific country sections (or country group sections). The wireless devices in
your system are only qualified for use in the countries identified by the Radio
Approval Marks on the system rating label. If the country you will be using the
wireless device in, is not listed, contact your local Radio Approval agency for
requirements. Wireless devices are closely regulated and use may not be
allowed.
The power output of the wireless device or devices that may be embedded in
your printer is well below the RF exposure limits as known at this time. Because
the wireless devices (which may be embedded into your printer) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe for use.
Regardless of the power levels, care should be taken to minimize human contact
during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless
device and the body, for use of a wireless device near the body (this does not
include extremities) is typical. This device should be used more than 20 cm (8
inches) from the body when wireless devices are on and transmitting.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of
common restrictions are listed below:
Radio frequency wireless communication can interfere with
equipment on commercial aircraft. Current aviation regulations
require wireless devices to be turned off while traveling in an airplane.
IEEE 802.11 (also known as wireless Ethernet) and Bluetooth
communication devices are examples of devices that provide wireless
communication.
In environments where the risk of interference to other devices or
services is harmful or perceived as harmful, the option to use a wireless
device may be restricted or eliminated. Airports, Hospitals, and
Oxygen or flammable gas laden atmospheres are limited examples
where use of wireless devices may be restricted or eliminated. When in
environments where you are uncertain of the sanction to use wireless
devices, ask the applicable authority for authorization prior to use or
turning on the wireless device.
5. Appendix
123
Regulatory information
Every country has different restrictions on the use of wireless devices.
Since your system is equipped with a wireless device, when traveling
between countries with your system, check with the local Radio
Approval authorities prior to any move or trip for any restrictions on
the use of a wireless device in the destination country.
If your system came equipped with an internal embedded wireless
device, do not operate the wireless device unless all covers and shields
are in place and the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any
way. Modification to a wireless device will void the authorization to
use it. Contact manufacturer for service.
Only use drivers approved for the country in which the device will be
used. See the manufacturer System Restoration Kit, or contact
manufacturer Technical Support for additional information.
5. Appendix
124
Regulatory information
21
China only
5. Appendix
125
Copyright
© 2014 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
•
Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
•
Microsoft, Windows, Windows Vista, Windows 7, Windows 8, and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft
Corporation.
•
Google, Picasa, Google Docs, Android and Gmail are either registered trademarks or trademarks of Google Inc.
•
Google Cloud Print is a trademark of Google Inc.
•
iPad, iPhone, iPod touch, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. AirPrint and the AirPrint logo are trademarks
of Apple Inc.7
•
All other brand or product names are trademarks of their respective companies or organizations.
The software included in this product contains open source software. You may obtain the complete
corresponding source code for a period of three years after the last shipment of this product by sending an email
to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a
physical medium such as a CD-ROM; a minimal charge will be required.
The following URL https://opensource.samsung.com/opensource/M453x_series/seq/0 leads to the
download page of the source code made available and open source license information as related to this
product. This offer is valid to anyone in receipt of this information.
QR code
REV.1.00
5. Appendix
126
User’s Guide
ADVANCED
ADVANCED
This guide provides information about installation, advanced configuration,
operation and troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
BASIC
This guide provides information concerning installation, basic operation and troubleshooting
on Windows.
ADVANCED
1. Software Installation
1. Useful Setting Menus
Installation for Mac
Before you begin reading a chapter
Reinstallation for Mac
Information
Installation for Linux
Layout
Reinstallation for Linux
Paper
Graphic
System Setup/ Setup
Emulation
12
Image Management
13
1. Using a Network-Connected
Machine
Useful network programs
Network
14
Wired network setup
Job Management
16
Installing driver over the network
Admin Setup
17
IPv6 configuration
15
Eco
19
Wireless network setup(Optional)
18
USB
20
Using the NFC feature (Optional)
36
Job Status
21
Supported Mobile Apps
44
Counter
22
AirPrint
46
Help
23
Google Cloud Print™
48
1. Special Features
Altitude adjustment
130
ADVANCED
Entering various characters
Printing quality problems
Printing features
Operating system problems
16
Using Direct Printing Utility
16
Mac printing
18
Linux printing
20
Unix printing
22
1. Useful Management Tools
Accessing management tools
Easy Capture Manager
Samsung AnyWeb Print
Easy Eco Driver
Using SyncThru™ Web Service
Using Samsung Easy Printer Manager
10
Using Samsung Printer Status
13
Using Samsung Printer Experience
15
1. Troubleshooting
Paper feeding problems
Power and cable connecting problems
Printing problems
131
1. Software Installation
This chapter provides instructions for installing essential and helpful software for use in an environment where the
machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using
the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network
connected machine’s driver (see "Installing driver over the network" on page 142).
• Installation for Mac
133
• Reinstallation for Mac
134
• Installation for Linux
135
• Reinstallation for Linux
136
• If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see
"Installing the driver locally" on page 22).
• Only use a USB cable no longer than 3 meters (118 inches).
Installation for Mac
Make sure that the machine is connected to your computer and
powered on.
10
Select USB Connected Printer on the Printer Connection Type and
click Continue.
Insert the supplied software CD into your CD-ROM drive.
11
Click Add Printer button to select your printer and add it to your printer
list.
12
13
Click Continue.
Double-click the CD-ROM icon that appears on your Mac desktop.
•
After the installation is finished, click Close.
For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
Enter the password and click OK (or Install Software).
1. Software Installation
133
Reinstallation for Mac
If the printer driver does not work properly, uninstall the driver and reinstall it.
Open the Applications folder > Samsung > Printer Software
Uninstaller.
To uninstall printer software, click Continue.
Check the program you want to delete and click Uninstall.
Enter the password and click OK.
After the uninstallation is finished, click Close.
If a machine has already been added, delete it from the Print Setup Utility
or Print & Fax.
1. Software Installation
134
Installation for Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
Installing the Unified Linux Driver
10
11
When installation finished, launch printing utility (Go to System >
Administration > Printing or execute "system-config-printer"
command in Terminal program).
Click Add button.
Select your printer.
Click Forward button and add it to your system.
You must log in as a super user (root) to install the machine software. If you
are not a super user, ask your system administrator.
Make sure that the machine is connected to your computer and
powered on.
Copy Unified Linux Driver package to your system.
Extract the package.
Proceed with installation.
Open Terminal program and go to the folder that you copied the
package to.
Move to uld folder.
Execute "./install.sh" command (If you're not logged in as root, execute
the command with "sudo" as "sudo ./install.sh")
1. Software Installation
135
Reinstallation for Linux
If the printer driver does not work properly, uninstall the driver and reinstall it.
Open Terminal program.
Proceed with uninstallation.
Move to uld folder extracted from Unified Linux Driver package.
Execute "./uninstall.sh" command (If you're not logged in as root,
execute the command with "sudo" as "sudo ./uninstall.sh")
1. Software Installation
136
2. Using a NetworkConnected Machine
This chapter gives you step-by-step instructions for setting up a network connected machine and software.
• Useful network programs
138
• Wired network setup
139
• Installing driver over the network
142
• IPv6 configuration
151
• Wireless network setup(Optional)
154
• Using the NFC feature (Optional)
172
• Supported Mobile Apps
180
• AirPrint
181
• Google Cloud Print™
183
Useful network programs
There are several programs available to setup the network settings easily in a
network environment. For the network administrator especially, managing
several machines on the network is possible.
• Before using the programs below, set the IP address first.
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of managing
network devices and lets you remotely monitor and troubleshoot network
machines from any site with corporate internet access.
•
Download this program from Samsung website (http://www.samsung.com
> find your product > Support or Downloads).
SyncThru™ Web Service
SetIP wired network setup
The web server embedded on your network machine allows you to do the
following tasks (see "Using SyncThru™ Web Service" on page 240).
•
Check the supplies information and status.
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.
•
Customize machine settings.
•
See "IPv4 configuration using SetIP (Windows)" on page 139.
•
Set the email notification option. When you set this option, the machine
status (toner cartridge shortage or machine error) will be sent to a certain
person's email automatically.
•
See "IPv4 configuration using SetIP (Mac)" on page 140.
•
See "IPv4 configuration using SetIP (Linux)" on page 141.
•
Configure the network parameters necessary for the machine to connect to
various network environments.
• The machine that does not support the network port, it will not be able
to use this feature (see "Rear view" on page 18).
• TCP/IPv6 is not supported by this program.
2. Using a Network-Connected Machine
138
Wired network setup
For example:
Printing a network configuration report
You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
•
MAC Address: 00:15:99:41:A2:78
•
IP Address: 169.254.192.192
Setting IP address
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 18).
• TCP/IPv6 is not supported by this program.
First, you have to set up an IP address for network printing and management. In
most cases a new IP address will be automatically assigned by a DHCP (Dynamic
Host Configuration Protocol) server located on the network.
Touch
(Setup) on the touch screen and select Network > Network
Configuration.
•
•
The machine has a display screen: Press the Menu(
) button on the
control panel and select Network > Network Configuration.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The machine has a touch screen: Press the
(Setup) on the touch
screen and select Network > Network Configuration.
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
The following instructions may differ for your model.
2. Using a Network-Connected Machine
139
Wired network setup
Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).
Follow the instructions in the installation window.
Before using the SetIP program, disable the computer firewall from System
Preferences > Security (or Security & Privacy) > Firewall.
Connect your machine to the network with a network cable.
The following instructions may vary from your model.
Turn on the machine.
From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
Click the
icon (third from left) in the SetIP window to open the TCP/IP
configuration window.
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 139) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
IPv4 configuration using SetIP (Mac)
Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
Connect your machine to the network with a network cable.
Double-click the CD-ROM icon that appears on your Mac desktop.
Insert the supplied software CD into your CD-ROM drive.
•
For Mac OS X 10.8, Double-click the CD-ROM that appears on Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Agree to agree to the license agreement.
2. Using a Network-Connected Machine
140
Wired network setup
Click Install. All components necessary for machine operations will be
installed.
IPv4 configuration using SetIP (Linux)
If you click Customize, you can choose individual components to install.
Before using the SetIP program, disable the computer firewall from System
Preferences or Administrator.
10
Enter the password and click OK (or Install Software).
11
Select Network Connected Printer (Wired or Wireless) on the Printer
Connection Type and click Set IP Address button.
12
13
The following instructions may vary from your model or operating systems.
When the message that warns that all applications will close on your
computer appears, click Continue.
Click the
icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Download SetIP program from Samsung web site and extract it.
Click to open the TCP/IP configuration window.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 139) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
14
Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
Double-click the SetIPApplet.html file in cdroot/Linux/noarch/
at_opt/share/utils folder.
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 139) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
The machine will automatically print the Network Configuration
Report.
2. Using a Network-Connected Machine
141
Installing driver over the network
• Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 18).
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 139).
Insert the supplied software CD into your CD-ROM drive.
• You can install the printer driver and software when you insert the
software CD into your CD-ROM drive.For windows, select the printer
driver and software in the Select Software to Install window.
Windows
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
The firewall software might be blocking network communication. Before
connecting the device to the network, disable the computer’s firewall.
•
For Windows 8,
If the installation window does not appear, from Charms, select
Search > Apps and search for Run. Type in X:\Setup.exe, replacing
“X” with the letter that represents your CD-ROM drive and click OK.
If “Tap to choose what happens with this disc.” pop-up window
appears, click the window and select Run Setup.exe.
Review and accept the installation agreements in the installation
window. Then, click Next.
Select Network on the Printer Connection Type screen. Then, click
Next.
2. Using a Network-Connected Machine
142
Installing driver over the network
Follow the instructions in the installation window.
Click Add a device.
Discovered machines will be shown on the screen.
From the Windows 8 Start Screen
• The V4 driver is automatically downloaded from the Windows Update if
your computer is connected to the Internet. If not, you can manually
download the V4 driver from Samsung website, www.samsung.com >
find your product > Support or downloads.
• You can download Samsung Printer Experience app from the
Windows Store. You need have a Microsoft account to use the Windows
Store.
a From Charms, select Search.
b Click Store.
c Search and click Samsung Printer Experience.
d Click Install.
• If you install the driver using the supplied software CD, V4 driver is not
installed. If you want to use the V4 driver in the Desktop screen, you can
download from the Samsung website, www.samsung.com > find your
product > Support or downloads.
• If you want to install Samsung’s printer management tools, you need to
install them using the supplied software CD.
Click the model name or host name you wish to use.
You can print a Network Configuration Report from the machine’s control
panel that will show the current machine’s host name (see "Printing a
network configuration report" on page 139).
The driver is automatically installed from the Windows Update.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on your computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 139).
From Charms, select Settings > Change PC settings > Devices.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
2. Using a Network-Connected Machine
143
Installing driver over the network
Command- line
/s or/S
Definition
Starts silent installation.
Description
Installs machine drivers
without prompting any UIs
or user intervention.
Command- line
/p””
or/P””
Definition
Specifies printer port.
Network Port will
be created by use
of Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Printer port name can be
specified as IP address,
hostname, USB local port
name, IEEE1284 port name
or network path.
For example:
• /p”xxx.xxx.xxx.xxx” in
where, “xxx.xxx.xxx.xxx”
means IP address for
network printer. /
p”USB001”, /P”LPT1:”, /
p”hostname”
• /
p"\\computer_name\shar
ed_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" in where,
"\\computer_name\share
d_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" means the
network path to the
printer by entering two
slashes, the computer
name or local IP address
of the PC sharing the
printer, and then the
share name of the printer.
2. Using a Network-Connected Machine
144
Installing driver over the network
Command- line
Definition
/a”” or/ Specifies destination path
A””
for installation.
The destination
path should be a
fully qualified path.
Description
Since machine drivers
should be installed on the OS
specific location, this
command applies to only
application software.
/n””
or/N””
Specifies printer name.
Printer instance shall be
created as specified printer
name.
With this parameter, you can
add printer instances as your
wishes.
/nd or/ND
Commands not to set the
installed driver as a default
machine driver.
It indicates installed machine
driver will not be the default
machine driver on your
system if there are one or
more printer drivers
installed. If there is no
installed machine driver on
your system, then this option
won’t be applied because
Windows OS will set installed
printer driver as a default
machine driver.
Command- line
Definition
Description
/x or/X
Uses existing machine
driver files to create printer
instance if it is already
installed.
This command provides a
way to install a printer
instance that uses installed
printer driver files without
installing an additional
driver.
/up”” or/
UP””
Removes only specified
printer instance and not
the driver files.
This command provides a
way to remove only specified
printer instance from your
system without effecting
other printer drivers. It will
not remove printer driver
files from your system.
/d or/D
Uninstalls all device drivers
and applications from your
system.
This command will remove
all installed device drivers
and application software
from your system.
/v””
or/V””
Shares installed machine
and add other available
platform drivers for Point &
Print.
It will install all supported
Windows OS platform’s
machine drivers to system
and share it with specified
 for point and
print.
/o or /O
Opens Printers and Faxes
folder after installation.
This command will open
Printers and Faxes folder
after the silent installation.
2. Using a Network-Connected Machine
145
Installing driver over the network
Command- line
/h, /H or /?
Definition
Description
Shows Command-line Usage.
Click Agree to agree to the license agreement.
Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
Mac
Make sure that the machine is connected to your network and powered
on.
Insert the supplied software CD into your CD-ROM drive.
Enter the password and click OK (or Install Software).
11
Click Add Printer button to select your printer and add it to your printer
list.
12
13
14
Click IP and Select HP Jetdirect - Socket in Protocol.
15
If Auto Select does not work properly, choose Select Printer Software and
your machine name in Print Using.
16
17
18
Click Add.
Double-click the CD-ROM icon that appears on your Mac desktop.
•
10
For Mac OS X 10.8, Double-click the CD-ROM that appears on Finder.
Select Network Connected Printer (Wired or Wireless) on the Printer
Connection Type and click Continue.
Enter the machine’s IP address in the Address input field.
Enter the queue name in the Queue input field. If you cannot determine
the queue name for your machine server, try using the default queue
first.
Double-click the MAC_Installer folder > Installer OS X icon.
Click Continue.
Read the license agreement and click Continue.
Click Continue.
After the installation is finished, click Close.
2. Using a Network-Connected Machine
146
Installing driver over the network
Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
Copy Unified Linux Driver package to your system.
Open Terminal program and go to the folder that you copied
thepackage to.
Extract the package.
Proceed with installation.
Click Add button.
Move to uld folder.
Execute “./install.sh” command (If you are not logged in as root,execute
the command with “sudo” as “sudo ./install.sh”).
10
11
Select AppSocket/HP JetDirect and enter your machine’s IP address.
Click Forward button and add it to your system.
Add a network printer
Double-click the Unified Driver Configurator.
Click Add Printer.
The Add printer wizard window opens. Click Next.
Select Network printer and click the Search button.
The printer’s IP address and model name appears on list field.
Select your machine and click Next.
Enter the printer description and click Next.
After the machine is added, click Finish.
When installation finished, launch Printing utility (Go to System >
Administration > Printing or execute “system-config-printer”
command in Terminal program).
2. Using a Network-Connected Machine
147
Installing driver over the network
UNIX
• Make sure your machine supports the UNIX operating system before
installing the UNIX printer driver (see "Operating System" on page 7).
See administration guide of your UNIX OS for details.
For example, on IBM AIX, use the following commands.
• The commands are marked with “”, when typing the commands, do not
type “”.
• Some features and optional goods may not be available depending on
model or country (see "Operating System" on page 7).
“gzip -d < enter the package name | tar xf -”
The installation procedure is common for all variants of UNIX OS mentioned.
From the Samsung website, download and unpack the UNIX Printer
Driver package to your computer.
Acquire root privileges.
the unpacked directory.
Run the install script.
“./install –i”
To use the UNIX printer driver, you have to install the UNIX printer driver
package first, then setup the printer. You can download the UNIX printer driver
package from the Samsung website (http://www.samsung.com > find your
product > Support or Downloads).
Installing the UNIX printer driver package
Unpack the UNIX printer driver package.
install is the installer script file which is used to install or uninstall the
UNIX Printer Driver package.
Use “chmod 755 install” command to give the permission to the
installer script.
Execute the “./install –c” command to verify installation results.
Run “installprinter” from the command line. This will bring up the Add
Printer Wizard window. Setup the printer in this window referring to
the following procedures.
“su -”
Copy the appropriate driver archive to the target UNIX computer.
2. Using a Network-Connected Machine
148
Installing driver over the network
Setting up the printer
On some UNIX OS, for example on Solaris 10, just added printers may not be
enabled and/or may not accept jobs. In this case run the following two
commands on the root terminal:
“accept ”
“enable ”
Uninstalling the printer driver package
The utility should be used to delete the printer installed in the system.
a Run “uninstallprinter” command from the terminal.
It will open the Uninstall Printer Wizard.
The installed printers are listed in the drop-down list.
b Select the printer to be deleted.
c Click Delete to delete the printer from the system.
d Execute the “./install –d” command to uninstall the whole package.
e To verify removal results, execute the “./install –c” command.
To add the printer to your UNIX system, run ‘installprinter’ from the command
line. This will bring up the Add Printer Wizard window. Setup the printer in this
window according to the following steps:
Type the name of the printer.
Specify any printer description in the Description field. This is optional.
To re-install it, use the command “./install –i” to reinstall the binaries.
10
Select the appropriate printer model from the model list.
Enter any description corresponding to the type of the printer in the
Type field. This is optional.
Specify the printer location in the Location field.
Type the IP address or DNS name of the printer in the Device textbox for
network-connected printers. On IBM AIX with jetdirect Queue type,
only the DNS name is possible-numeric IP address is not allowed.
Queue type shows the connection as lpd or jetdirect in the
corresponding list box. Additionally, usb type is available on Sun Solaris
OS.
Select Copies to set the number of copies.
Check the Collate option to receive copies already sorted.
Check the Reverse Order option to receive copies in the reverse order.
2. Using a Network-Connected Machine
149
Installing driver over the network
11
12
Check the Make Default option to set this printer as default.
Click OK to add the printer.
2. Using a Network-Connected Machine
150
IPv6 configuration
IPv6 is supported properly only in Windows Vista or higher.
Select Menu(
control panel.
) > Network > TCP/IP (IPv6) > IPv6 Protocol on the
OR
The machine supports the following IPv6 addresses for network printing and
managements.
•
Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
•
Stateless Address: Automatically configured IPv6 address by a network
router.
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
Select
(Setup) > Network > Next > TCP/IP (IPv6) > IPv6 Protocol
on the touch screen.
Select On using arrows on the touch screen.
Turn the machine off and turn it on again.
When you install the printer driver, do not configure both IPv4 and IPv6. We
recommend to configure either IPv4 or IPv6.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
DHCPv6 address configuration
10
From the control panel
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
Activating IPv6
Accessing menus may differ from model to model (see "Menu overview" on
page 26).
2. Using a Network-Connected Machine
151
IPv6 configuration
Select Menu(
control panel.
) > Network > TCP/IP (IPv6) > DHCPv6 Config on the
From the SyncThru™ Web Service
Select
(Setup) > Network > Next > TCP/IP (IPv6) > DHCPv6 Config
on the touch screen.
Select the option you want using arrows and touch
the selection.
11
(back) to save
•
Router: Use DHCPv6 only when requested by a router.
•
Always Use: Always use DHCPv6 regardless of router request.
•
Never Use: Never use DHCPv6 regardless of router request.
Activating IPv6
Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password.
We recommend you to change the default password for security
reasons.
•
ID: admin
•
Password: sec00000
When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings.
Click TCP/IPv6 on the left pane of the website.
Check the IPv6 Protocol check box to activate IPv6.
Click the Apply button.
Turn the machine off and turn it on again.
2. Using a Network-Connected Machine
152
IPv6 configuration
• You can also set the DHCPv6.
Address must be enclosed in '[ ]' brackets.
• To manually set the IPv6 address:
Check the Manual Address check box. Then, the Address/Prefix text
box is activated. Enter the rest of the address
(e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A
through F).
IPv6 address configuration
Start a web browser, such as Internet Explorer, that supports IPv6
addressing as a URL.
Select one of the IPv6 addresses (Link-local Address, Stateless
Address, Stateful Address, Manual Address) from Network
Configuration Report (see "Printing a network configuration report" on
page 139).
•
Link-local Address: Self-configured local IPv6 address (Address
starts with FE80).
•
Stateless Address: Automatically configured IPv6 address by a
network router.
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]).
2. Using a Network-Connected Machine
153

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2014:11:05 20:34:29-08:00
Create Date                     : 2014:11:05 20:34:14-08:00
Metadata Date                   : 2014:11:05 20:34:29-08:00
Creator Tool                    : FrameMaker 8.0
Format                          : application/pdf
Title                           : english.book
Creator                         : yj0410.choi
Document ID                     : uuid:d3a4e2fd-68f5-407f-b4dd-03e7e5a142b9
Instance ID                     : uuid:61a48e2d-e512-484a-89a4-89efb418f13b
Producer                        : Acrobat Distiller 10.1.10 (Windows)
Has XFA                         : No
Page Count                      : 75
Author                          : yj0410.choi

EXIF Metadata provided by EXIF.tools