Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

User Manual 11

113Convenient FunctionsUsingtheDTMFFunction7 Touch the character keys to input the DTMF code Tip The DTMF code can also be input using the character keys on the microphone.8 Touch [ENT] The DTMF code will be set. Tip Repeat Steps 5 to 8 when registering additional numbers in the other channels..ᲽᲿᲿᲿᲿᲹᲺ᲻᲼ᲽᲾᲿ ᳀ ᳁᳂#$%&&5RCEG'069 Press for one second or longer The DTMF code will be set and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.TransmittingtheregisteredDTMFcode1 Press for one second or longer The set-up menu will be displayed.2 Touch [SIGNALING] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Turn , or touch the screen to select [3AUTODIALER]4 Touch [3AUTODIALER] to select “ON” The auto dialer will switch between “ON” and “OFF” each time it is touched.5 Press for one second or longer The display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.6 Press The function menu will be displayed.$#%-$#%-&%5%1&'610'53.(4'3&6/(/'/14;#761&+#.'45+) 0#.+0)ᲸᲺ᲻1((*\Ჽ᳀᳀ᲹᲺ᲻᲼Ż7 Touch [DTMF] The character will turn orange in color. Tip When [DTMF] is not displayed in the menu, use [BACK] or [FWD] to switch the menu.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.$#%- (9&/8 /76'5%12'53.01+5'53.&6/(Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
114Convenient FunctionsUsingtheDTMFFunction8 Turn to select the DTMF code9 Press the microphone [PTT] The DTMF code will be sent out automatically.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.$#%- (9&/8 /76'5%12'53.01+5'53.&6/(10 Release the microphone [PTT] The transmission will continue until the DTMF signal is sent out.SendingouttheDTMFcodemanually1 Press and hold down the microphone [PTT] and press [0] to [9], [✽], [#], [A] to [D]2 Release the microphone [PTT] The transmission will continue until the DTMF signal is sent out.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
115Convenient FunctionsUsingtheTimerFunctionUsingthestopwatch functionThis radio is equipped with a lap timer and countdown timer. These can be used by switching to the timer / clock screen.Displayingthetimer/clockscreen1 Press for one second or longer The set-up menu will be displayed.2 Touch [DISPLAY] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Turn , or touch the screen to select [1DISPLAYSELECT]4 Touch [1DISPLAYSELECT] The screen for setting the various screens on or off will be displayed.Ż6#4)'6.1%#6+10&+52.#;&+52.#;5'.'%6#0)'41$#%-)4170&%1.14%1/2#559+&'$#0&5%12'ᲹᲺ᲻᲼$#%-$#%-5 Touch [TIMER/CLOCK] to select “ON” Each time this is touched, the setting will switch between “OFF” and “ON”.6 Press for one second or longer The display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.&+52.#;)25+0(1#.6+67&'((1((1((16+/'4%.1%-&+52.#;5'.'%6Ჹ$#%-$#%-7 Press twice briefly The timer/clock screen will be displayed. Tip The screen will change in the following sequence each time is pressed when both the altitude display screen and GPS screen are “ON”. Normal frequency display → Compass/Lat&Lon display screen → Altitude display screen → Timer/Clock screen → GPS screenᲺᲸᲺᲸᲹ᲻ᲹᲸ ᳁Ჸ#7) /1&'Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
116Convenient FunctionsUsingtheTimerFunctionUsingthelap timer1 Display the timer / clock screen2 Touch [MODE] The lap timer will be displayed.ᲹᲸ ᳁Ჸ/1&'ᲺᲸᲺᲸᲹ᲻#7) Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻3 Touch [START] The timer will start.ᲸᲸᲸᲸ ᲸᲸᲸᲸ /1&'6+/'456#46 4'5'6Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻4 Touch [LAP] The lap time will be saved in the memory each time it is touched. Tip Up to 99 lap times can be saved in the memory. ᲸᲸᲸᲸ Ჸ᲻ᲸᲸᲸ /1&'6+/'4.#25612Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻5 Touch [STOP] The timer will stop.ᲸᲸᲸᲸ Ჸ᲻᲻ᲸᲸᲸ ᲺᲹ/1&'6+/'4.#25612Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻ The lap times and split times will be erased when [RESET] is touched.ᲸᲸᲸᲸ/1&'6+/'456#46 4'5'6ᲺᲹᲽ᳁᲻ᲽᲽᲸᲸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
117Convenient FunctionsUsingtheTimerFunction The lap time measured in the past will be displayed when [RECALL] is touched. When there are multiple lap times, touch [] or [] to switch between the lap times. ᲸᲸᲸᲸ/1&'6+/'4ᲺᲹᲽ᳁᲻ᲽᲽᲸᲸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻6 Touch briefly twice The display will return to the previous screen. Tips • Touch [RECALL] when the previous lap times are being displayed and then turn twice. • The screen will change in the following sequence each time is pressed when both the altitude display screen and GPS screen are “ON”. Normal frequency display → Compass/Lat&Lon display screen → Altitude display screen → Timer/Clock screen → GPS screenUsingthecountdown timer1 Display the timer / clock screen2 Touch [MODE] twice The countdown timer will be displayed.ᲹᲸ ᳁Ჸ/1&'ᲺᲸᲺᲸᲹ᲻#7) Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻3 Touch [SETUP] The “Hour” of the start time will blink.4 Turn to set the hour Tips • The hour can be set between 00 and 99. • The time can also be set by touching [+] or [-].ᲸᲸᲸ ᲸᲸᲸᲸᲸ%1706& 1906+/'4/1&' 56#46 4'5'6Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻5 Touch [SETUP] The “Hour” will be set, and “Minute” will blink.6 Turn to set the minute Tip The time can also be set by touching [+] or [-].ᲸᲸᲸᲸᲸᲸ%1706& 1906+/'4ᲸᲹᴁᴃᲸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻$#%-$#%-Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
118Convenient FunctionsUsingtheTimerFunction7 Touch [SETUP] The “Minute” will be set and the set time will be displayed in the counter.ᲸᲸᲸᲸᲸᲸ%1706& 1906+/'4ᲸᲹᴁᴃᲸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻$#%-$#%-8 Touch [START] The countdown timer will start./1&' 56#46 4'5'6ᲸᲸᲹᲸᲸᲸᲸᲸᲸᲸ%1706& 1906+/'4Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻ When the set time has passed, a beep will sound and the time will be displayed as “00:00’00” in green characters. Touch [STOP] to pause the timer in between. Touch [START] to restart the countdown and touch [RESET] to measure from the start again.ᲸᲸᲹᲸᲸᲸᲸᲸᲸᲸᲸ ᲸᲸᲸ%1706& 1906+/'4/1&' 56#46 4'5'6Ჸ18(Ჹ᲼ᲽᲸᲸ᲼᲻ᲽᲸᲸ ᲻9 Press briefly twice The display will return to the previous screen. Tip The screen will change in the following sequence each time is pressed when both the altitude display screen and GPS screen are “ON”. Normal frequency display → Compass/Lat&Lon display screen → Altitude display screen → Timer/Clock screen → GPS screenApplication for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
119Convenient FunctionsUsingtheTimerFunctionUsingtheAPOfunctionWhen the APO (Automatic Power-off) function is set to ON, the power supply to the radio will be automatically switched off when there has been no operation for a preset period of time. A notification beep will sound one minute before the power is turned off. This helps to prevent the battery from being used up when you forget to switch the radio off when connected to a car battery.1 Press for one second or longer The set-up menu will be displayed.2 Touch [CONFIG] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Turn , or touch the screen to select [13APO]4 Touch [13APO] The screen for selecting “ON”, “OFF” and the time until the power is turned off after operations will be displayed.$#%-$#%-%10(+)70+6#216161((1((014/#./'64+%4:%18'4#)'ᲹᲹᲹᲺᲹ᲻Ჹ᲼5 Touch [ON]6 Touch [+] or [-] to select the time until the power supply is switched off The time will change by one step each time it is touched. The time step can be selected from the following 14 steps. “0.5hour” “1.0hour” “1.5hour” “2.0hour” “3.0hour” “4.0hour” “5.0hour” “6.0hour” “7.0hour” “8.0hour” “9.0hour” “10.0hour” “11.0hour” “12.0hour”$#%-$#%-JQWTᲽᲹᲸ%10(+)#21᲻Ჹ10 1((7 Press twice briefly The APO function will be switched on and the display will return to the previous screen. Tip The display can also be returned to the previous screen by touching [BACK] twice.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40

Navigation menu