Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

User Manual 7

70Using the MemoryUsingtheMemory4 Touch [TXIN] The number input screen will be displayed.39'46;7+12#5&()*,-.<:%8$0/#$% 5RCEG%CRU'06@ᲹᲺ᲻$#%-᲼ᲺᲹ ᲹᲽᲸᲾᲸᲸ5 Enter the transmit frequency The entered frequency will be displayed on the right side of [T] at the top of the screen.ᲹᲺ᲻᲼ᲽᲾᲿ᳀᳁᳂#$%&5RCEG'06$#%-ᲺᲸᲸ᲼Ჹ ᲹᲽᲸᲾ6 Touch [ENT] The display will return to the memory list.ᲹᲺ᲻᲼ᲽᲾᲿ᳀᳁᳂#$%&5RCEG'06ᲸᲾ᲼Ჹ᲻ᲽᲸᲾᲺᲸᲸ᲼Ჹ ᲹᲽ7 Press to save the transmit frequency When memory writing is complete, the receive frequency will be shown in the display.ReceivingWeatherBroadcastChannels(USAversiononly)This radio includes the preprogrammed VHF Weather Broadcast Station Memory Channel Bank, and can receive the broadcast or the weather alert by recalling or scanning a desired channel.The following channels are stored in the weather station memory bank of this radio.ChannelNo.Frequency ChannelNo.FrequencyWX01 162.550 MHz WX06 162.500 MHzWX02 162.400 MHz WX07 162.525 MHzWX03 162.475 MHz WX08 161.650 MHzWX04 162.425 MHz WX09 161.775 MHzWX05 162.450 MHz WX10 163.275 MHzThis “WX” function can only be used through the programmable keys [P1] to [P4] on the microphone.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
71Using the MemoryUsingtheMemoryAssigningthe“WX”functiontoaprogrammablekeyonthemicrophone1 Press for one second or longer The set-up menu will be displayed.2 Select and touch [CONFIG] The menu list will be displayed.3 Select and touch [10MICPROGRAMKEY] The setting screen for programmable keys on the microphone will be displayed.4 Touch the key name (P1 to P4) where the WX function is going to be assigned The functions that can be assigned will be displayed. When the [WX] is not displayed, turn to scroll the display.5 Select and touch [WX] 6 Touch [BACK] The display will return to the setting screen for programmable keys.RecallingtheweatherchannelsExample:When“WX”isassignedto[P1]1 Press [P1] on the microphone The WX function is activated, and the weather channel selected last time the WX function was activated will be displayed on the screen.2 Turn to select the other channels3 Press the [PTT] button on the microphone to search for louder stations Scanning of the channels stored in the weather station memory bank will start. When the scanning pauses on a station, press the [PTT] button once to halt the scan, or press it twice to restart the scan.4 Press the [PTT] button to finish the scan5 Press [P1] The WX function will be inactivated and the display will return to the previous screen.Listeningtheweather alertIn the event of extreme weather disturbances, such as storms and hurricanes, the NOAA (National Oceanic and Atmospheric Administration) sends a weather alert accompanied by a 1050 Hz tone and subsequent weather report on one of the NOAA weather channels. You may disable to receive the weather alert tone using [SIGNALING]→[9WXALERT] in the set-up menu.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
72ScanningScanningSignalSearchThe FTM-400XDR/DE transceiver is equipped with a scanning function to search for memory channels and VFO frequencies for active signals.Scanning can be performed using the following four methods:VFO scanScan for all memory channelsScan for specified memory channelsScanning the programmable memoriesTipThe band scope function can be used to search for active channels and show a graph.When [SCOPE] in the screen is touched, the strengths of the channels will be displayed in a graph, with the current frequency located in the center of the screen ( P.47).VFOscan1 Select the band to be scanned, and switch to the VFO mode2 Press briefly The function menu will be displayed.3 Touch [SCAN] Tip When [SCAN] is not displayed in the function menu, touch [BACK] and [FWD] to switch the menu. The scan will start from low to high frequency.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᲸᲸᲸ/76'5%12'/853.8(15-+25'.1((&96Z294*+5%#0 4'8(9&$#%- During scanning, the decimal point of the frequency display will blink. When a signal is received, the scan will stop for three seconds before starting to scan again. Tips • The scan can also be started by pressing the [UP] or [DWN] button on the microphone for one second or longer.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᲸᲸᲸ/76'5%12'/853.8(15-+25'.1((&96Z294*+5%#0 4'8(9&$#%- • The scanning direction (UP/DOWN) can be set using [SCAN]→[2SCANDIRECTION] in the set-up menu. • The scanning direction can also be changed by pressing the [UP] or [DWN] button on the microphone or turning during scanning. • The action used to stop the scanning may be set using [SCAN]→[3SCANRESUME] in the set-up menu (refer to the next page). • The squelch level may be adjusted using the following procedure during scanning. Touch [SQL] → Turn .Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
73ScanningSignalSearch ●TostopthescanningTo stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the radio will not transmit in this case).SettingthereceiveoperationwhenthescanningstopsAny of the following three methods can be selected as the action to be taken after the scanning stops.(1) Restarts the scanning after receiving for the set amount of time. Select from one, three or five seconds.(2) Continues receiving until the signal disappears and then restart the scanning two seconds after the signal disappears (BUSY).(3) Stops the scanning to receive at that frequency (HOLD).1 Press for one second or longer The set-up menu will be displayed.2 Touch [SCAN] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Touch [3SCANRESUME] to select the reception method The reception method will change in the following order each time the screen is touched. “BUSY” → “HOLD” → “1sec” → “3sec” → “5sec” Tips • The reception method can also be selected by pressing . • Factory default value: 3 sec$#%-$#%-UGE5%#05%#04'57/'5%#0&+4'%6+10᲻ᲹᲺ᲻#761&7#.9#6%*5612724 Press for one second or longer The reception method when the scanning stops will be set and the display will return to the previous screen.TipThe settings here are applicable to “VFO Scan”, “Memory Scan” and “Programmable Memory Scan”.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
74ScanningSignalSearchMemoryscanThe FTM-400XDR/DE transceiver will scan the frequencies registered in the memories in the order of the memory channel number.1 Switch to the memory mode2 Press briefly The function menu will be displayed.3 Touch [SCAN] Tip When [SCAN] is not displayed in the function menu, touch [BACK] or [FWD] to switch the menu. The scanning will start from the lowest to the highest memory channel number.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.5-+25'.1((&96Z294*+5%#0 4'8(9&$#%- During scanning, the decimal point of the frequency display will blink. When a signal is received, the scan will stop for three seconds before starting to scan again. Tips • The scan can also be started by pressing the [UP] or [DWN] button on the microphone for one second or longer.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.5-+25'.1((&96Z294*+4'8(9&$#%-5%#0 • The scanning direction (UP/DOWN) can be set using [SCAN]→[2SCANDIRECTION] in the set-up menu. • The action to be taken when scanning is stopped can be set using [SCAN]→[3SCANRESUME] in the set-up menu (refer to the previous page). • The squelch level may be adjusted using the following procedure during scanning. Touch [SQL] → Turn ●TostopthescanningTo stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the radio will not transmit in this case).Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
75ScanningSignalSearchSelectingthescanningmethodThe scanning may be set for all memories or only specified memories.1 Press for one second or longer The set-up menu will be displayed.2 Touch [MEMORY] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 03 Touch [2MEMSCANTYPE] to select the scanning method The setting will switch between “ALL MEM” and “SELECT MEM” each time it is touched.$#%-$#%-.#4)'ᲹᲺ/'/5%#06;2'#.2*#6#)5+<'#../'/ ALL MEM: Scan all memories. SELECT MEM: Scan only specified memories. Tips • The scanning method can also be selected by pressing . • Factory default value: ALL MEM4 Press for one second or longer The scanning method will be set and the display will return to the previous screen.Settingthespecified memoriesSpecify the memories to be scanned when “2 MEM SCAN TYPE” is set to “SELECT MEM” in the set-up menu.The memory can be specified using either of the following two methods:(1) Selects channels using the memory list screen(2) Specifies individual channels using the function menu screen(1)Specifymemorychannelsusingthememorylistscreen1 Touch [V/M] for 2 to 3 seconds (until the beep sounds) The memory list screen will be displayed.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
76ScanningSignalSearch2 Select the memory channel to be specified by turning Tip The memory channel may also be selected by touching it on the screen.3 Touch [SKIP/SEL] to display “SELECT” The setting displayed under [SKIP/SEL] will change in the following order each time it is touched. “OFF” → “SKIP” → “SELECT”᲼Ჹ ᲸᲽᲸᲸ᲼ᲹᲹᲽᲸᲾᲹᲸᲸᲺᲸᲸ᲻ᲸᲸᲸ᲼ᲸᲸ$#%-$#%-5-+25'.1((&'.&'. Tip Repeat Steps 2 and 3 to specify the other memories next.4 Touch [BACK] Return to the previous screen, and “” will be displayed on the left side of the memory channel number.(2)Specifyindividuallyusingthefunctionmenuscreen1 Switch to the memory mode, and recall the memory channel to be set as the specified channel2 Press The function menu will be displayed.3 Touch [SKIP/SEL] to display “SELECT” “” will be displayed on the left side of the memory channel number. Tip When [SKIP/SEL] is not displayed in the function menu, touch [BACK] or [FWD] to change the menu. The setting displayed under [SKIP/SEL] will change in the following order each time it is touched. “OFF” → “SKIP” → “SELECT”Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.5-+25'.1((&96Z294*+5%#0 4'8(9&$#%-Scanonlythespecifiedmemorychannels1 First, select the band to be scanned, before switch to the memory mode2 Press for one second or longer The set-up menu will be displayed.3 Touch [MEMORY] The menu list will be displayed.$#%-$#%-6:4:5'672/'074'5'6%.10'%10(+)9Ჰ4'55%#0&+52.#;5+) 0#.+0)#245 126+105&%#4&/'/14;&#6#%#..5+) 0Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
77ScanningSignalSearch4 Touch [2MEMSCANTYPE] and select “SELECT MEM” The setting will switch between“ALL MEM” and “SELECT MEM” each time it is touched.5 Press for one second or longer The display will return to the previous screen.$#%-$#%-.#4)'ᲹᲺ/'/5%#06;2'#.2*#6#)5+<'#../'/6 Press The function menu will be displayed.7 Touch [SCAN] The scan only those memory channels that have been set to “SELECT” will be started. Tips • The scan can also be started by pressing the [UP] or [DWN] button on the microphone for one second or longer.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.5-+25'.5'.'%6&96Z294*+5%#0 4'8(9&$#%- • The scan will be performed in increasing order of the memory channel number. • When a signal is received, the scanning stops for three seconds and then the scanning starts again. • To stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the radio will not transmit in this case).SettingthememoriestobeskippedMemory channels which you do not wish to receive can be skipped during scanning.The channels to be skipped can be set using the following two methods:(1) Designate channels using the memory list screen(2) Sets channels individually using the function menu screen(1)Designatingchannelstobeskippedusingthememorylistscreen1 Touch [V/M] for two to three seconds (until the beep sounds) The memory list screen will be displayed.Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.2 Turn to select the memory to be skipped Tip The memory can also be selected by touching it directly.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
78ScanningSignalSearch3 Touch [SKIP/SEL] to display “SKIP” The setting displayed under [SKIP/SEL] will change in the following order each time it is touched. “OFF” → “SKIP” → “SELECT” Tip Repeat Steps 2 and 3 to specify the other memories next.᲼Ჹ ᲸᲽᲸᲸ᲼ᲹᲹᲽᲸᲾᲹᲸᲸᲺᲸᲸ᲻ᲸᲸᲸ᲼ᲸᲸ$#%-$#%-5-+25'.1((&'.&'.4 Touch [BACK] Return to the previous screen, and a blinking “” will be displayed on the left side of the memory channel number.(2)Settingchannelstobeskippedindividuallyusingthefunctionmenuscreen1 Switch to the memory mode, and recall the memory channels that have been set to be skipped2 Press The function menu will be displayed.3 Touch [SKIP/SEL] to display “SKIP” A blinking “” will be displayed on the left side of the memory channel number. Tip When [SKIP/SEL] is not displayed in the function menu, touch [BACK] or [FWD] to change the menu. The setting displayed under [SKIP/SEL] will change in the following order each time it is touched. “OFF” → “SKIP” → “SELECT”Ჹ᲼ᲽᲾᲸᲸᲹᲺ᳀;1-1*#/#᲼᲻᲻ ᳀ᲾᲸᲽᲸᲸ61-;1Ჺ᲻/76'5%12'/8 53.5-+25'.1((&96Z294*+5%#0 4'8(9&$#%-Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40
79ScanningSignalSearchScanningtheprogrammablememories(PMS)Using the dedicated memory channel, only the frequencies within the specified frequency range will be scanned.The frequency range is registered beforehand in the PMS memory channel.WritingintotheprogrammablememoryNine pairs (P1L/P1U through P9L/P9U) of frequency ranges can be set up in the PMS memory channels.Register the lower limit of the frequency range to be scanned into the memory channel “PL” and the upper limit into the memory channel “PU”.Memories with the same channel number “” (a number from 1 to 9) are handled as one pair of PMS channel “P”.Example:SetupaPMSchannelbyregisteringalowerfrequencyof433.200MHzandanupperfrequencyof433.700MHzintheP1memorychannel1 Switch to the VFO mode2 Select the frequency (433.200) to be set for the lower limit, using Caution The frequency to be set as the lower limit (P1L) must be lower than the upper limit (P1U).3 Press for one second or longer The memory writing screen will be displayed.ᲸᲸ᲼᲻᲻ ᲺᲸᲸ8(1/76'5%12'/853.8(1Ჹ᲼ᲽᲾ4 Turn to select [P1L] The memory channel can also be selected by touching it directly. Tip The memory channel can be assigned with an alpha-tag name ( P.66).Ჸ᲻᲼Ჺ᲻ᲸᲸᲽᲸ72Ჹ.2Ჹ$#%-$#%-5-+2 5'.1((&'.&'.5 Press The display will return to the previous screen, and the memorized frequency and memory channel number will be displayed.6 Switch to the VFO mode7 Select the frequency (433.700) to be set for the upper limit, using 8 Press for one second or longer The memory writing screen will be displayed./76'5%12'/853.ᲸᲸ᲼᲻᲻ ᲿᲸᲸ8(18(1Ჹ᲼ᲽᲾ9 Turn to select [P1U] The memory channel can also be selected by touching it directly. Tip The memory channel can be assigned with an alpha-tag name ( P.66).Ჸ᲻᲼Ჿ᲻ᲸᲸ᲻᲼Ჺ᲻ᲸᲸᲽᲸ72Ჹ.2Ჹ$#%-$#%-5-+2 5'.1((&'.&'.Application for FCC / IC FCC ID: K6620345X40 / IC: 511B-20345X40

Navigation menu