Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

20345X40 User Manual >

User Manual 7

Download:
Mirror Download [FCC.gov]
Document ID	2766134
Application ID	+N0JnBurmEMmgtaAbixgVg==
Document Description	User Manual 7
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	244.77kB (3059608 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-27 00:00:00
Creation Date	2015-09-29 09:04:57
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 09:05:03
Document Title	OM
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	YAESU MUSEN CO., LTD.

Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Memory
4 Touch [TX IN]
á˛¸ á˛¸á˛ş
The number input screen will be displayed.
á˛š á˛ź á˛˝ á˛š á˛ž á˛¸
3 9 ' 4 6 ; 7 + 1 2
%CRU # 5 & ( ) * , - .
: % 8 $ 0
á˛šá˛şá˛ť
@ #$%
5 Enter the transmit frequency
The entered frequency will be displayed on the right
side of [T] at the top of the screen.
6 Touch [ENT]
á˛¸ á˛¸á˛ş
5RCEG
'06
á˛š á˛ź á˛˝ á˛š á˛ž á˛¸
á˛š
á˛ş
á˛ť
á˛ź
á˛˝
á˛ž
$#%-
á˛ż
áł
áł
5RCEG
áł
'06
á˛ş
á˛ť
á˛ź
á˛˝
á˛ž
á˛ż
áł
áł
5RCEG
áł
'06
á˛¸ á˛¸á˛ş
The display will return to the memory list.
/ $#%-
á˛š á˛ź á˛˝ á˛š á˛ž á˛¸
á˛š á˛ź á˛˝ á˛ť á˛ž á˛¸
á˛š
7 Press
to save the transmit frequency
When memory writing is complete, the receive frequency will be shown in the
display.
Using the Memory
Receiving Weather Broadcast Channels (USA version only)
This radio includes the preprogrammed VHF Weather Broadcast Station Memory
Channel Bank, and can receive the broadcast or the weather alert by recalling or
scanning a desired channel.
The following channels are stored in the weather station memory bank of this radio.
Channel
No.
Frequency
Channel
No.
Frequency
WX01
162.550 MHz
WX06
162.500 MHz
WX02
162.400 MHz
WX07
162.525 MHz
WX03
162.475 MHz
WX08
161.650 MHz
WX04
162.425 MHz
WX09
161.775 MHz
WX05
162.450 MHz
WX10
163.275 MHz
This âWXâ function can only be used through the programmable keys [P1] to [P4] on the
microphone.
70
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Memory
Assigning the âWXâ function to a programmable key on the microphone
1 Press
for one second or longer
The set-up menu will be displayed.
Select and touch [CONFIG]
The menu list will be displayed.
Select and touch [10 MIC PROGRAM KEY]
The setting screen for programmable keys on the microphone will be displayed.
Touch the key name (P1 to P4) where the WX function is going to be assigned
The functions that can be assigned will be displayed.
to scroll the display.
When the [WX] is not displayed, turn
Select and touch [WX]
Touch [BACK]
The display will return to the setting screen for programmable keys.
Recalling the weather channels
Example: When âWXâ is assigned to [P1]
1 Press [P1] on the microphone
Using the Memory
The WX function is activated, and the weather channel selected last time the WX
function was activated will be displayed on the screen.
Turn
to select the other channels
Press the [PTT] button on the microphone to search for louder stations
Scanning of the channels stored in the weather station memory bank will start.
When the scanning pauses on a station, press the [PTT] button once to halt the
scan, or press it twice to restart the scan.
Press the [PTT] button to finish the scan
Press [P1]
The WX function will be inactivated and the display will return to the previous screen.
Listening the weather alert
In the event of extreme weather disturbances, such as storms and hurricanes, the
NOAA (National Oceanic and Atmospheric Administration) sends a weather alert
accompanied by a 1050 Hz tone and subsequent weather report on one of the
NOAA weather channels. You may disable to receive the weather alert tone using
[SIGNALING]â[9 WX ALERT] in the set-up menu.
71
Scanning
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
The FTM-400XDR/DE transceiver is equipped with a scanning function to search for
memory channels and VFO frequencies for active signals.
Scanning can be performed using the following four methods:
VFO scan
Scan for all memory channels
Scan for specified memory channels
Scanning the programmable memories
Tip
The band scope function can be used to search for active channels and show a graph.
When [SCOPE] in the screen is touched, the strengths of the channels will be displayed in a graph,
with the current frequency located in the center of the screen ( P.47).
VFO scan
1 Select the band to be scanned, and switch to the VFO mode
2 Press briefly
The function menu will be displayed.
3 Touch [SCAN]
Tip
8(1
á˛ź á˛ť á˛ť á˛¸á˛¸á˛¸
When [SCAN] is not displayed in the function menu,
touch [BACK] and [FWD] to switch the menu.
The scan will start from low to high frequency.
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
$#%-
Scanning
Tips â˘ The scan can also be started by pressing the [UP] or
[DWN] button on the microphone for one second or
longer.
*+
1 ((
8 /
During scanning, the decimal point of the frequency
display will blink.
When a signal is received, the scan will stop for three
seconds before starting to scan again.
6Z29 4
á˛š 5-+25'.
á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
53.
/ 76' 5%12'
8(1
á˛ź á˛ť á˛ť á˛¸á˛¸á˛¸
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
$#%-
8 /
6Z29 4
*+
á˛š 5-+25'.
á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
1 ((
53.
/ 76' 5%12'
â˘ The scanning direction (UP/DOWN) can be set using [SCAN]â[2 SCAN DIRECTION] in the
set-up menu.
â˘ The scanning direction can also be changed by pressing the [UP] or [DWN] button on the
microphone or turning
during scanning.
â˘ The action used to stop the scanning may be set using [SCAN]â[3 SCAN RESUME] in the
set-up menu (refer to the next page).
â˘ The squelch level may be adjusted using the following procedure during scanning.
Touch [SQL] â Turn
72
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
ââTo stop the scanning
To stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the
radio will not transmit in this case).
Setting the receive operation when the scanning stops
Any of the following three methods can be selected as the action to be taken after the
scanning stops.
(1) Restarts the scanning after receiving for the set amount of time. Select from one,
three or five seconds.
(2) Continues receiving until the signal disappears and then restart the scanning two
seconds after the signal disappears (BUSY).
(3) Stops the scanning to receive at that frequency (HOLD).
1 Press
for one second or longer
The set-up menu will be displayed.
2 Touch [SCAN]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [3 SCAN RESUME] to select the reception
Tips â˘ The reception method can also be selected by pressing
5%#0
á˛š
&7#.9#6%*5612
á˛ş
5%#0&+4'%6+10
72
á˛ť
5%#04'57/'
á˛ť UGE
#761
$#%-
Scanning
method
The reception method will change in the following
order each time the screen is touched.
âBUSYâ â âHOLDâ â â1secâ â â3secâ â â5secâ
/'/14;
&+52.#;
â˘ Factory default value: 3 sec
4 Press
for one second or longer
The reception method when the scanning stops will be set and the display will return
to the previous screen.
Tip
The settings here are applicable to âVFO Scanâ, âMemory Scanâ and âProgrammable Memory Scanâ.
73
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
Memory scan
The FTM-400XDR/DE transceiver will scan the frequencies registered in the memories
in the order of the memory channel number.
1 Switch to the memory mode
2 Press briefly
The function menu will be displayed.
3 Touch [SCAN]
Tip
á˛˝á˛¸á˛¸
The scanning will start from the lowest to the highest
memory channel number.
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
Tips â˘ The scan can also be started by pressing the [UP] or
[DWN] button on the microphone for one second or
longer.
6Z29 4
*+
á˛š á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
$ # % - 5-+25'.
1 ((
8 /
During scanning, the decimal point of the frequency
display will blink.
When a signal is received, the scan will stop for three
seconds before starting to scan again.
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
When [SCAN] is not displayed in the function menu,
touch [BACK] or [FWD] to switch the menu.
53.
á˛˝á˛¸á˛¸
/ 76' 5%12'
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
6Z29 4
*+
á˛š á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
$ # % - 5-+25'.
1 ((
8 /
53.
/ 76' 5%12'
â˘ The scanning direction (UP/DOWN) can be set using [SCAN]â[2 SCAN DIRECTION] in the
set-up menu.
â˘ The action to be taken when scanning is stopped can be set using [SCAN]â[3 SCAN
RESUME] in the set-up menu (refer to the previous page).
Scanning
74
â˘ The squelch level may be adjusted using the following procedure during scanning.
Touch [SQL] â Turn
ââTo stop the scanning
To stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the
radio will not transmit in this case).
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
Selecting the scanning method
The scanning may be set for all memories or only specified memories.
1 Press
for one second or longer
The set-up menu will be displayed.
2 Touch [MEMORY]
5'672/'07
The menu list will be displayed.
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [2 MEM SCAN TYPE] to select the scanning
method
The setting will switch between âALL MEMâ and
âSELECT MEMâ each time it is touched.
/'/14;
&+52.#;
á˛š
#.2*# 6#)5+<'
á˛ş
/'/5%#0 6;2'
.#4)'
#../'/
$#%-
ALL MEM: Scan all memories.
SELECT MEM: Scan only specified memories.
Tips â˘ The scanning method can also be selected by pressing
â˘ Factory default value: ALL MEM
4 Press
for one second or longer
The scanning method will be set and the display will return to the previous screen.
Setting the specified memories
The memory can be specified using either of the following two methods:
(1) Selects channels using the memory list screen
Scanning
Specify the memories to be scanned when â2 MEM SCAN TYPEâ is set to âSELECT
MEMâ in the set-up menu.
(2) Specifies individual channels using the function menu screen
(1) Specify memory channels using the memory list screen
1 Touch [V/M] for 2 to 3 seconds (until the beep
sounds)
The memory list screen will be displayed.
á˛š á˛şáł
;1-1*#/#
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
8 /
53.
/ 76' 5%12'
75
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
2 Select the memory channel to be specified by turning
Tip
The memory channel may also be selected by touching it
on the screen.
3 Touch [SKIP/SEL] to display âSELECTâ
á˛¸ á˛¸á˛š
á˛š á˛ź á˛˝ á˛¸ á˛¸ á˛¸
á˛¸á˛¸ á˛ş
á˛š á˛ź á˛˝ á˛š á˛ž á˛¸
á˛¸ á˛¸á˛ť
á˛¸ á˛¸á˛ź
5-+25'.
&'.
$#%-
1 ((
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
âOFFâ â âSKIPâ â âSELECTâ
Tip
Repeat Steps 2 and 3 to specify the other memories next.
4 Touch [BACK]
Return to the previous screen, and âďľâ will be displayed on the left side of the
memory channel number.
(2) Specify individually using the function menu screen
1 Switch to the memory mode, and recall the memory channel to be set as the
specified channel
2 Press
The function menu will be displayed.
3 Touch [SKIP/SEL] to display âSELECTâ
âďľâ will be displayed on the left side of the memory
channel number.
Tip
When [SKIP/SEL] is not displayed in the function menu,
touch [BACK] or [FWD] to change the menu.
Scanning
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
âOFFâ â âSKIPâ â âSELECTâ
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
$#%-
6Z29 4
*+
á˛š 5-+25'.
á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
8 /
1 ((
53.
/ 76' 5%12'
Scan only the specified memory channels
1 First, select the band to be scanned, before switch to the memory mode
2 Press for one second or longer
The set-up menu will be displayed.
3 Touch [MEMORY]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
76
/'/14;
&+52.#;
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
4 Touch [2 MEM SCAN TYPE] and select âSELECT
MEMâ
The setting will switch betweenâALL MEMâ and
âSELECT MEMâ each time it is touched.
Press
for one second or longer
The display will return to the previous screen.
Press
The function menu will be displayed.
Touch [SCAN]
The scan only those memory channels that have
been set to âSELECTâ will be started.
Tips â˘ The scan can also be started by pressing the [UP] or
[DWN] button on the microphone for one second or
longer.
á˛š
#.2*# 6#)5+<'
á˛ş
/'/5%#0 6;2'
.#4)'
#../'/
$#%-
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
6Z29 4
*+
á˛š á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
$ # % - 5-+25'.
5'.'%6
8 /
53.
/ 76' 5%12'
â˘ The scan will be performed in increasing order of the memory channel number.
â˘ When a signal is received, the scanning stops for three seconds and then the scanning starts
again.
â˘ To stop the scanning, either touch [SCAN] or press the microphone [PTT] button (the radio
will not transmit in this case).
Setting the memories to be skipped
Memory channels which you do not wish to receive can be skipped during scanning.
The channels to be skipped can be set using the following two methods:
(1) Designate channels using the memory list screen
(1) Designating channels to be skipped using the memory list screen
1 Touch [V/M] for two to three seconds (until the beep
sounds)
The memory list screen will be displayed.
á˛š á˛şáł
Scanning
(2) Sets channels individually using the function menu screen
;1-1*#/#
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
8 /
2 Turn
Tip
53.
/ 76' 5%12'
to select the memory to be skipped
The memory can also be selected by touching it directly.
77
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
3 Touch [SKIP/SEL] to display âSKIPâ
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
âOFFâ â âSKIPâ â âSELECTâ
Tip
á˛¸ á˛¸á˛š
á˛š á˛ź á˛˝ á˛¸ á˛¸ á˛¸
á˛¸á˛¸ á˛ş
á˛š á˛ź á˛˝ á˛š á˛ž á˛¸
á˛¸ á˛¸á˛ť
á˛¸ á˛¸á˛ź
&'.
$#%-
5-+25'.
1 ((
Repeat Steps 2 and 3 to specify the other memories
next.
4 Touch [BACK]
Return to the previous screen, and a blinking âďľâ will be displayed on the left side of
the memory channel number.
(2) Setting channels to be skipped individually using the function menu screen
1 Switch to the memory mode, and recall the memory channels that have been set to
be skipped
2 Press
The function menu will be displayed.
3 Touch [SKIP/SEL] to display âSKIPâ
A blinking âďľâ will be displayed on the left side of the
memory channel number.
Tip
When [SKIP/SEL] is not displayed in the function menu,
touch [BACK] or [FWD] to change the menu.
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
âOFFâ â âSKIPâ â âSELECTâ
Scanning
78
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
$#%-
8 /
6Z29 4
*+
á˛š 5-+25'.
á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
1 ((
53.
/ 76' 5%12'
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Signal Search
Scanning the programmable memories (PMS)
Using the dedicated memory channel, only the frequencies within the specified
frequency range will be scanned.
The frequency range is registered beforehand in the PMS memory channel.
Writing into the programmable memory
Nine pairs (P1L/P1U through P9L/P9U) of frequency ranges can be set up in the PMS
memory channels.
Register the lower limit of the frequency range to be scanned into the memory channel
âPďLâ and the upper limit into the memory channel âPďUâ.
Memories with the same channel number âďâ (a number from 1 to 9) are handled as
one pair of PMS channel âPďâ.
Example: Set up a PMS channel by registering a lower frequency of 433.200 MHz
and an upper frequency of 433.700 MHz in the P1 memory channel
1 Switch to the VFO mode
2 Select the frequency (433.200) to be set for the lower
limit, using
Caution
3 Press
The frequency to be set as the lower limit (P1L)
must be lower than the upper limit (P1U).
for one second or longer
The memory writing screen will be displayed.
4 Turn
Tip
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
8(1
á˛ź á˛ť á˛ť á˛ş á˛¸á˛¸
8 /
53.
á˛˝ á˛¸á˛¸
2á˛š.
á˛ź á˛ť á˛ť á˛ş á˛¸ á˛¸
2á˛š7
/ 76' 5%12'
&'.
$#%-
The memory channel can be assigned with an alpha-tag
name ( P.66).
5-+25'.
1 ((
5 Press
Scanning
to select [P1L]
The memory channel can also be selected by
touching it directly.
8(1
The display will return to the previous screen, and the memorized frequency and
memory channel number will be displayed.
Switch to the VFO mode
Select the frequency (433.700) to be set for the
8(1
upper limit, using
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
Press
for one second or longer
8(1
The memory writing screen will be displayed.
á˛ź á˛ť á˛ť á˛ż á˛¸á˛¸
9 Turn
to select [P1U]
The memory channel can also be selected by
touching it directly.
Tip
The memory channel can be assigned with an alpha-tag
name ( P.66).
8 /
53.
á˛˝ á˛¸á˛¸
2á˛š.
á˛ź á˛ť á˛ť á˛ş á˛¸ á˛¸
2á˛š7
á˛ź á˛ť á˛ť á˛ż á˛¸ á˛¸
$#%-
/ 76' 5%12'
&'.
5-+25'.
1 ((
79

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : YAESU MUSEN CO., LTD.
Create Date                     : 2015:09:29 09:04:57+09:00
Modify Date                     : 2015:09:29 09:05:03+09:00
Subject                         : FCC / IC
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 09:05:03+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : OM
Description                     : FCC / IC
Creator                         : YAESU MUSEN CO., LTD.
Document ID                     : uuid:95cec9a1-b013-4de2-b336-8f434375216c
Instance ID                     : uuid:a4f315df-1e83-4c90-b9ae-40638c19c761
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 10

EXIF Metadata provided by EXIF.tools

Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

Contents

User Manual 7

FCC ID Filing: K6620345X40

Navigation menu

Namespaces

Views

Navigation