Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

20345X40 User Manual >

User Manual 4

Download:
Mirror Download [FCC.gov]
Document ID	2766131
Application ID	+N0JnBurmEMmgtaAbixgVg==
Document Description	User Manual 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	184.83kB (2310424 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-27 00:00:00
Creation Date	2015-09-29 09:03:25
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 09:03:31
Document Title	OM
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	YAESU MUSEN CO., LTD.

Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Receiving
2 Touch [V/M]
8(1
The mode will change to the memory mode.
The channel number will be displayed above the
frequency.
The name (tag) assigned to the memory channel will
also be displayed.
3 Touch [V/M] again
á˛š á˛ź á˛˝ á˛¸á˛¸á˛¸
8(1
á˛ź á˛ť á˛ť á˛¸á˛¸á˛¸
8 /
53.
á˛š á˛şáł
The mode will change to the VFO mode and the
frequency will return to the last frequency received.
âVFOâ will be displayed above the frequency.
/ 76' 5%12'
;1-1*#/#
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
8(1
á˛ź á˛ť á˛ť á˛¸á˛¸á˛¸
8 /
53.
/ 76' 5%12'
8(1
á˛š á˛ź á˛˝ á˛¸á˛¸á˛¸
8(1
á˛ź á˛ť á˛ť á˛¸á˛¸á˛¸
8 /
53.
/ 76' 5%12'
This radio is equipped with an Automatic Mode Select (AMS) function which
automatically selects any one of four communication modes to match the signal
received.
Besides C4FM digital signals, analog signals are also identified in order to automatically
match the communication mode of the partner station.
* Digital communication can be performed only on the Band A.
Press
Basic Operations
Switching the communication mode
â *â on the screen.
to display âââ
* Display differs depending on the signal received.
8(1
á˛š á˛ź á˛˝ á˛¸á˛¸á˛¸
Display
example when in the AMS
AMSćăŽčĄ¨ç¤şäž
8(1
á˛ź á˛ť á˛ť á˛¸á˛¸á˛¸
8 /
53.
/ 76' 5%12'
45
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Receiving
When operating in a fixed communication mode, switch to the communication mode using
The communication mode will switch in sequence as follows each time
is pressed.
â (AMS)â â âDN (V/D mode)â â âVW/DW (FR mode)â â âFM (Analog)â
âââ
Display
Explanation of modes
AMS
(Automatic Mode Select)
Operating mode
â
ââ
The operating mode is automatically selected from four communication
modes to match the signal received.
(The ââ part display differs according to the signal received)
The AMS feature settings may be changed via Set-up Menu ( P.174).
V/D mode
(simultaneous voice and data
communication mode)
DN
As the audio signal error is detected and repaired at the same time as
the transmission of the digital audio signal, it becomes more difficult
for conversations to be cut off. A basic digital mode of C4FM FDMA.
Voice FR mode
(Voice full-rate mode)
VW
Digital voice data is transmitted using the entire 12.5 kHz bandwidth.
High quality voice communication is possible.
Data FR mode
(high speed data
communication mode)
DW
High speed data communication mode using the entire 12.5 kHz
bandwidth for data communication.
Automatically switches to this mode for video communication.
Analog FM mode
FM
Analog communication mode using the FM mode.
This mode is effective for communication when the signal strength is
so weak that the voice is cut off midway in the digital mode.
Caution
In the V/D mode (âDNâ displayed), the position information is included in the transmitted signal during
the conversation, but in the Voice FR mode (âVWâ displayed), the position information is not included.
Basic Operations
Switching the modulation mode
The modulation mode can be selected from âFMâ, âNARROW FMâ and âAMâ in the analog
mode.
When shipped from the factory, the mode is set to âAUTOâ where the most optimal
modulation mode is automatically selected according to the frequency.
1 Choose the operating band
2 Press for one second or longer
The set-up menu will be displayed.
46
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Receiving
3 Touch [TX/RX]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
4 Touch [MODE] to select the modulation mode
The modulation mode changes in the following order
each time the screen is touched:
âAUTO (FM)â: Automatically switches the modulation
mode to match the frequency band
âFMâ: Switches to the FM mode.
âNARROW FMâ: Switches to the Narrow FM mode.
The degree of modulation becomes
half the normal level.
âAMâ: Switches to the AM mode.
Tip
/'/14;
&+52.#;
6:4:
/1&'
#761 (/
&+)+6#.
Ĺť
#7&+1
Ĺť
$#%-
Factory default value: AUTO (FM)
5 Press
for one second or longer
The modulation mode is set up and the display
returns to the previous screen.
Basic Operations
Displaying the band scope
The band scope can display a graph of the signal activity of the channels surrounding
the memory channel or frequency that has been set up in the operating band. The
display is centered on the current operating frequency.
1 Touch [SCOPE]
[SCOPE] will turn orange and the band scope will be
displayed.
Tip
The range to be shown can also be adjusted. Refer to
âSetting the width of the band scopeâ ( P.172).
8( 1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
8 /
53.
/ 76' 5%12'
47
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Receiving
2 Touch [SCOPE] again
The display will return to the dual band screen.
8( 1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛š
8 /
á˛ť
53.
á˛˝
á˛ż
áł
á˛š
/ 76' 5%12'
8( 1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
8 /
53.
/ 76' 5%12'
Muting the audio
The audio in the operating band and sub-band can be muted with just one touch.
1 Touch [MUTE]
[MUTE] will turn orange and the sound will become
inaudible.
8( 1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
Basic Operations
á˛źá˛ťá˛ť áłá˛žá˛¸
8 /
2 Touch [MUTE] again
53.
/ 76' 5%12'
8( 1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
The sound will become audible.
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
8 /
48
53.
/ 76' 5%12'
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Communicating
Transmitting
1 Press and hold the microphone [PTT]
Tip
MIC
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
P1
Keep the microphone at a distance of about 1 inch away
from the mouth when talking.
LOCK
MIC
PTT
LAMP
A red bar will be displayed on the left of the band
display.
Also, the transmission output level will be displayed
in the PO meter under the VOL meter.
Talk directly into the microphone [MIC]
P3
P4
P2
DTMF MICROPHONE
MH-48
8(1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
8 /
3 Release [PTT]
8(1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛źá˛ťá˛ť áłá˛žá˛¸
Tips
â˘ Refrain from transmitting continuously for a long period of time
as much as possible. The temperature of the main body will
rise and this may result in burns and equipment failure due to
overheating.
â˘ âERROR TX FREQâ will be displayed when attempting to
transmit on a frequency that is not in the amateur band.
/ 76' 5%12'
8 /
53.
/ 76' 5%12'
Basic Operations
The red bar and PO meter level will disappear and
the radio will return to the receiving state.
53.
49
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Communicating
Adjusting the transmit power
When communicating with a nearby station, the transmit power can be reduced to save
on energy consumption.
1 Press
The function menu will be displayed.
2 Touch [Tx PWR] to select the transmit power
8(1
The transmission power is changed in the following
sequence, each time [Tx PWP] is touched.
âHIâ â âLOâ â âMDâ
Model
FTM-400XDR/DE
HI
MD
LO
50 W
20 W
5W
3 Press
The transmit power is set and the display returns to
the previous screen.
Basic Operations
Tips
â˘ The current setting will be displayed under [Tx PWR] in the
display.
â˘ The default setting when shipped from the factory is âHIâ.
Adjusting the sensitivity of the microphone
The sensitivity (gain) of the microphone can be adjusted.
1 Press
for one second or longer
The set-up menu will be displayed.
50
á˛¸
;1
8- 1 * # / #
5 % #á˛š 0á˛ş áł 4 '
$#%-
8 /
6Z29 4
*+
á˛š 5-+25'.
á˛ź á˛˝ á˛ž& á˛¸9 á˛¸ ( 9 &
1 ((
53.
/ 76' 5%12'
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Communicating
2 Touch [TX/RX]
5'672/'07
The menu list will be displayed.
/'/14;
&+52.#;
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [AUDIO]
6:4:
The menu list will be displayed.
/1&'
#761 (/
&+)+6#.
Ĺť
#7&+1
Ĺť
$#%-
4 Touch [3 MIC GAIN] to select the sensitivity
#7&+1
The sensitivity will change in the following sequence
each time the screen is touched.
âMINâ â âLOWâ â âNORMALâ â âHIGHâ â âMAXâ
Tips â˘ The sensitivity can also be selected by pressing
á˛š
/+:5'2#4#6'
á˛ş
57$$#0&/76'
á˛ť
/+%)#+0
5'2#4#6'
1 ((
014/#.
â˘ Factory default value: NORMAL
$#%-
5 Press
Tip
The display can also be returned to the previous screen
by touching [BACK] twice.
Basic Operations
for one second or longer
The sensitivity is set and the display returns to the
previous screen.
Communicating in the FM mode
Choose the operating band
Select âFMâ as the modulation mode
Tune the radio using
Press and hold the microphone [PTT] to talk
Tip
The Narrow FM mode can also be used. Set the mode to [NARROW FM] under [TX/RX] â [MODE]
in the set-up menu.
51
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Communicating
Communicating using the repeater
This radio includes an ARS (Automatic Repeater Shift) function which permits
communication through the repeater automatically just by setting the receiver to the
repeater frequency.
1 Set the receive frequency to the repeater frequency
â-â or â+â appears on top of the display.
2 Press [PTT], to begin communicating through the repeater
Tips
â˘ Press
and touch [REV] to reverse the transmission and reception frequencies temporarily to
check whether direct communication with the partner station is
8(1
possible.
á˛źá˛ť áł á˛żá˛¸á˛¸
â˘ When reversing the frequencies, [REV] will turn orange.
â˘ When [REV] is touched one more time, the reverse is cancelled.
á˛ź á˛š 4'
61
8- ; 1 á˛ş á˛ť 6Z29
5 % #á˛ş 0
*+
â˘ When the settings are changed in the set-up menu, this radio can
á˛ž
á˛¸
á˛ź
á˛ť
áł
áł
á˛˝
á˛¸
$ # % - 5-+25'.
(9&
&9
1 ((
be used in even more convenient ways.
The ARS function can be turned off under âCONFIGâ â â4 AUTO
8 /
5 3 . / 76' 5%12'
RPT SHIFTâ.
The repeater shift direction can be set under âCONFIGâ â â5 RPT SHIFTâ.
The repeater shift width can be changed under âCONFIGâ â â6 RPT SHIFT FREQâ.
Basic Operations
ââRepeater shift
The FTM-400XDR/DE has been configured, at the factory, for the repeater shifts
customary in the country where it is sold. For the 144 MHz band, this usually will be 600
kHz, while the 430 MHz shift will be 1.6 MHz or 7.6 MHz.
Depending on the part of the band in which you are operating, the repeater shift may
be either downward (â) or upward (+), and one of these icons will appear on the display
when repeater shifts have been enabled.
ââAutomatic repeater shift (ARS)
The FTM-400XDR/DE ARS feature causes the appropriate repeater shift to be
automatically applied whenever it is tuned into the designated repeater sub-bands.
If the ARS feature does not appear to be working, you may have accidentally disabled it.
To re-enable ARS:
1 Press
for one second or longer
The set-up menu will be displayed.
52

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : YAESU MUSEN CO., LTD.
Create Date                     : 2015:09:29 09:03:25+09:00
Modify Date                     : 2015:09:29 09:03:31+09:00
Subject                         : FCC / IC
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 09:03:31+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : OM
Description                     : FCC / IC
Creator                         : YAESU MUSEN CO., LTD.
Document ID                     : uuid:4783895a-e2ea-4e42-b02f-03f2ae3d1e05
Instance ID                     : uuid:2aa90e06-b3eb-4619-8b93-77b48e52be8d
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 8

EXIF Metadata provided by EXIF.tools

Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

Contents

User Manual 4

FCC ID Filing: K6620345X40

Navigation menu

Namespaces

Views

Navigation