Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Download:
Mirror Download [FCC.gov]
Document ID	2766352
Application ID	+N0JnBurmEMmgtaAbixgVg==
Document Description	User Manual 17
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	213.03kB (2662832 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-27 00:00:00
Creation Date	2015-09-29 09:10:42
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 09:16:13
Document Title	OM
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	YAESU MUSEN CO., LTD.

Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
4 Touch [1 AMS TX MODE] to select the AMS transmit
&+)+6#.
Tips • Factory default value: TX M
▂
• Blink“
”: TX M
▂
 link“ ○○”: TX FM FIXED / TX DN FIXED / TX VW FIXED
▂
 ○○”: AUTO
“
* The ○○ symbol display differs according to the received signal.
5 Press
for one second or longer
The AMS transmit mode will be set and the display will return to the previous screen.
Setting the squelch type of the digital mode
The squelch type in the digital mode can be set.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [TX/RX]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [DIGITAL]
/'/14;
&+52.#;
Customize Menu Settings and User Preferences
Ჹ #/56:/1&'
6: /
mode.
Ჺ
53.6;2'
1 ((
The AMS transmit mode changes in the following
᲻
53.%1&'
ᲸᲸ Ჹ
order each time the symbol is touched.
᲼ &+)+6#.212726+/'  UGE
TX M: The operating mode is automatically selected
$#%from four communication modes to match
the received signal. Pressing the Microphone
[PTT] momentarily, toggles between the Digital
and Analog communication modes.
TX FM FIXED: The RX mode is automatically selected from the four communication
modes to match the received signal. The TX mode is automatically
changed to the “FM” mode.
TX DN FIXED: The RX mode is automatically selected from the four communication
modes to match the received signal. The TX mode is automatically
changed to the “DN” mode.
TX VW FIXED: The RX mode is automatically selected from the four communication
modes to match the received signal. The TX mode is automatically
changed to the “VW” mode.
AUTO: 
The RX and TX operating mode is automatically selected from the four
communication modes to match the received signal.
6:4:
/1&'
#761 (/
&+)+6#.
Ż
#7&+1
Ż
175
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
4 Touch [2 SQL TYPE]
The squelch type changes in the following order each
time the symbol is touched.
“OFF” → “CODE” → “BREAK”
OFF: There will always be audio output when a digital
signal of a YAESU transceiver is received.
CODE: Audio will only be output when the received
signals have a matching SQL CODE.
BREAK: Regardless of the CODE setting, audio will
be output when the partner station transmits
using the BREAK setting.
Tip
&+)+6#.
Ჹ
#/56:/1&'
Ჺ
53.6;2'
᲻
53.%1&'
᲼
&+)+6#.212726+/'
6: /
1((
ᲸᲸ Ჹ
 UGE
$#%-
Factory default value: OFF
5 Press
for one second or longer
The squelch type will be set and the display will return to the previous screen.
Setting the squelch code of the digital mode
Customize Menu Settings and User Preferences
A squelch code may be set in the digital mode.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [TX/RX]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [DIGITAL]
6:4:
/1&'
4 Select and touch [3 SQL CODE]
The characters of the set value will turn orange in
color.
#761 (/
&+)+6#.
Ż
#7&+1
Ż
Ჺ
53.6;2'
᲻
53.%1&'
᲼
&+)+6#.212726+/'
1 ((
ᲸᲸ Ჹ
 UGE
$#%Ჺ
53.6;2'
᲻
53.%1&'
᲼
&+)+6#.212726+/'
$#%-
176
/'/14;
&+52.#;
1 ((
ᲸᲸ Ჹ
 UGE
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
5 Turn
to select the code
Tips • The code can be selected from 001 to 126.
• Factory default value: 001
6 Touch [3 SQL CODE]
The characters of the set value will turn green in color.
Ჺ
53.6;2'
᲻
53.%1&'
᲼
&+)+6#.212726+/'
1 ((
Ჸ᲻Ჸ
 UGE
$#%Ჺ
53.6;2'
᲻
53.%1&'
᲼
&+)+6#.212726+/'
1 ((
Ჸ᲻Ჸ
 UGE
$#%-
7 Press
for one second or longer
The squelch code will be set and the display will return to the previous screen.
Setting the pop-up time for the partner station information
The time that partner station information such as the call sign is displayed can be set.
1 Press for one second or longer
The set-up menu will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [DIGITAL]
6:4:
/1&'
4 Touch [4 DIGITAL POPUP TIME] to select the pop-
up time
The pop-up time changes in the following order each
time the symbol is touched.
“OFF” “2sec” “4sec” “6sec” “8sec” “10sec” “20sec”
“30sec” “60sec” “CONTINUE”
Tip
/'/14;
&+52.#;
#761 (/
&+)+6#.
Ż
#7&+1
Ż
᲻
53.%1&'
᲼
&+)+6#.212726+/'
ᲸᲸ Ჹ
 UGE
$#%-
Customize Menu Settings and User Preferences
2 Touch [TX/RX]
Factory default value: 10 sec
5 Press
for one second or longer
The pop-up time will be set and the display will return to the previous screen.
177
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Setting the display method for my position
Refer to the separate Operating Manual GM Edition (download the manual from the
YAESU website).
Setting the Standby Beep
When communicating in a digital mode, a beep is sounded after the end of the other
stations transmission.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [TX/RX]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [DIGITAL]
6:4:
/1&'
Customize Menu Settings and User Preferences
4 Touch [6 STANDBY BEEP] to select OFF/ON
The setting will switch between “ON” and “OFF” each
time the symbol is touched.
 isable the STANDBY BEEP feature.
OFF: D
ON: E
 nable the STANDBY BEEP feature.
Tip
/'/14;
&+52.#;
#761 (/
&+)+6#.
Ż
#7&+1
Ż
Ჽ
.1%#6+105'48+%'
10
56#0&$;$''2
10
$#%-
Factory default value: ON
5 Press
for one second or longer
The display will return to the previous screen.
Displaying the version of the DSP program
The version of the DSP program in the digital unit inside the radio can be checked.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [TX/RX]
3 Touch [DIGITAL]
4 Touch [7 DSP VERSION]
The version of the DSP program will be displayed.
5 Press for one second or longer
The display will return to the previous screen.
178
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Setting the sub-band mute
The receive audio of the sub-band can be automatically muted when receiving signals in
the main band.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [TX/RX]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [AUDIO]
/'/14;
&+52.#;
&+)+6#.
Ż
#7&+1
Ż
$#%-
4 Touch [1 SUB BAND MUTE] to select OFF/ON
Tip
#7&+1
Ჹ
57$$#0&/76'
Ჺ
/+%)#+0
1 ((
014/#.
Factory default value: OFF
5 Press
for one second or longer
The sub-band mute will be set and the display will return to the previous screen.
Setting the sensitivity of the microphone
The sensitivity (gain) of the microphone can be adjusted.
Refer to “Adjusting the sensitivity of the microphone” ( P.50) for details.
Memory channel settings
Setting the display method for the memory tag
The display format for the name and frequency assigned to a memory can be selected
for each channel.
Refer to “Changing the display format of the memory tag” ( P.68) for details.
Customize Menu Settings and User Preferences
The setting will switch between “ON” and “OFF” each
time the symbol is touched.
OFF: The sub-band audio will not be muted when a
signal is received on the main band.
ON: The sub-band audio will be muted when a signal
is received on the main band.
Setting the memory scan method
The memory scan can be set to scan for all memory channels or only specified memory
channels.
Refer to “Selecting the scanning method” ( P.75) for details.
179

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : YAESU MUSEN CO., LTD.
Create Date                     : 2015:09:29 09:10:42+09:00
Modify Date                     : 2015:09:29 09:16:13+09:00
Subject                         : FCC / IC
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 09:16:13+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : OM
Description                     : FCC / IC
Creator                         : YAESU MUSEN CO., LTD.
Document ID                     : uuid:224d752f-4766-4dff-bbe1-1eb7c24b61ff
Instance ID                     : uuid:68fd2ed8-db31-47d3-8393-15955d0fce9d
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 5

EXIF Metadata provided by EXIF.tools