Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Download:
Mirror Download [FCC.gov]
Document ID	2766351
Application ID	+N0JnBurmEMmgtaAbixgVg==
Document Description	User Manual 16
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	141.36kB (1766947 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-27 00:00:00
Creation Date	2015-09-29 09:10:12
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 09:10:20
Document Title	OM
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	YAESU MUSEN CO., LTD.

Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Set-up Menu List
Menu / Item
DISPLAY
1 DISPLAY SELECT
TARGET LOCATION
BACKGROUND
COLOR
BAND SCOPE
LCD BRIGHTNESS
LCD CONTRAST
TIME/VDD
TX/RX
MODE
DIGITAL
1 AMS TX MODE
Customize Menu Settings and User Preferences
MEMORY
1 ALPHA TAG SIZE
MEM SCAN TYPE
SIGNALING
1 TONE SQL FREQ
164
Screen display settings
is pressed
when
briefly
Switch between the
compass screen and the
latitude and longitude
display screen when using
the GPS and GM functions
Set the display
background color
Scope Display width
setting
Touch panel brightness
Touch panel contrast
Time / Voltage Display
setting
DCS CODE
AUTO DIALER
DTMF MEMORY
Available settings
(Default values shown in BOLD)
ALTITUDE: ON / OFF
TIMER/CLOCK: ON / OFF
GPS INFO: ON / OFF
COMPASS / NUMERIC
ORANGE / GREEN / BLUE / PURPLE /
GRAY
NARROW / WIDE
MIN / 2 / 3 / 4 / 5 / 6 / MAX
-3 / -2 / -1 / 0 / +1 / +2 / +3
TIME / VDD
Setting the signal format AUTO (FM) / FM / NARROW FM / AM
in the analog mode
Set the AMS
transmission mode
Digital mode Squelch
SQL TYPE
type setting
SQL CODE
Squelch code setting in
the digital mode
DIGITAL POPUP TIME Information screen popup time
LOCATION SERVICE
Own (MY) position
display setting in the
digital mode
STANDBY BEEP
Standby Beep setting
DSP VERSION
DSP version display
AUDIO
1 SUB BAND MUTE
2 MIC GAIN
Explanation of
function
TX M / TX FM FIXED / TX DN FIXED /
TX VW FIXED / AUTO
OFF / CODE / BREAK
CODE: 001 to 126
OFF / 2 sec / 4 sec / 6 sec / 8 sec / 10 sec /
20 sec / 30 sec / 60 sec / CONTINUE
ON / OFF
Refer to the separate Operating Manual
GM Edition for details on the functions.
ON / OFF
Ver. 2.** (cannot be edited; differs
depending on the time of release)
Sub-band mute setting
Microphone sensitivity
setting
OFF / ON
MIN / LOW / NORMAL / HIGH / MAX
Display size setting of
memory channel tag
Scanning method
setting during memory
scan
SMALL / LARGE
Tone frequency
(CTCSS)
DCS code setting
DTMF code automatic
transmission setting
DTMF code registration
67.0Hz - 254.1 Hz 88.5 Hz
ALL MEM / SELECT MEM
023 - 754
OFF / ON
1 - 9 ways 16 characters each
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Set-up Menu List
Menu / Item
SIGNALING
5 PAGER CODE
SCAN
GM
PRG REV TONE
BELL RINGER
SQL EXPANSION
WX ALERT
(USA Version Only)
DUAL WATCH STOP
SCAN DIRECTION
SCAN RESUME
RANGE RINGER
Explanation of
function
Pager individual code
setting
User programmed
reverse tone frequency
Recall sound length
setting
Separate squelch type
setting for transmit and
receive
Weather alert operation
setting
Available settings
(Default values shown in BOLD)
RX CODE : 01 - 50 05
RX CODE 2: 01 - 50 47
TX CODE 1: 01 - 50 05
TX CODE 2: 01 - 50 47
300 Hz - 3000 Hz 1500 Hz
OFF / 1 time / 3 times / 5 times / 8 times /
CONTINUOUS
OFF / ON
OFF / ON
Setting the signal
AUTO / HOLD
reception method
Scanning direction
UP / DOWN
setting
Set the resume
BUSY / HOLD / 1 sec / 3 sec / 5 sec
operation after scan stop
Customize Menu Settings and User Preferences
Bell sound setting
OFF / ON
when checking for
stations within sphere of
communications
2 RADIO ID
Specific ID display by
- (cannot be edited)
transceiver
* Refer to the separate Operating Manual GM Edition for details on the functions.
WIRES X
1 RPT/WIRES FREQ
Setting of operating
MANUAL / PRESET
frequency in repeater /
WIRES-X
PRESET FREQUENCY Registration of the
144.000 - 146.000 144.620
preset frequency
2 SEARCH SETUP
Setting the WIRES
HISTORY / ACTIVITY
ROOM selection method
3 EDIT CATEGORY TAG Editing the category tag C1 - C5
4 REMOVE ROOM/NODE Deletion of the
C1 - C5
registered categories
* Refer to the separate Operating Manual WIRES-X Edition for details on the functions.
CONFIG
1 DATE & TIME ADJUST Setting the date and time
2 DATE & TIME FORMAT Setting the date and
DATE: mmm/dd/yyyy /
time display formats
yyyy/mmm/dd / dd/mmm/yyyy /
yyyy/dd/mmm
TIME: 24 hour / 12 hour
3 TIME ZONE
Time zone setting
UTC±14: 00 (0.5 h interval) UTC +0: 00
Auto repeater shift setting OFF / ON
4 AUTO RPT SHIFT
5 RPT SHIFT
Repeater shift direction OFF / − / +
setting
(Differs depending on frequency)
165
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Set-up Menu List
Menu / Item
CONFIG
6 RPT SHIFT FREQ
FM AM STEP
Beep setting
Clock shift setting
Microphone P buttons
setting
11 RX COVERAGE
Reception range
expansion setting
Display unit setting
Customize Menu Settings and User Preferences
13 APO
17 GPS DEVICE
18 GPS LOG
Automatic power OFF
operating time
TX time out setting
PIN code setting and
pairing start
GPS function positioning
selection
GPS receiver selection
GPS access time setting
COM PORT SETTING
COM port setting
DATA BAND SELECT
APRS/DATA band
selection setting
DATA SPEED
APRS/DATA
communication baud
rate setting
14 TOT
15 Bluetooth PAIRING
16 GPS DATUM
166
Repeater TX offset
setting
Channel step setting
8 BEEP
9 CLOCK TYPE
10 MIC PROGRAM KEY
12 UNIT
DATA
Explanation of
function
Available settings
(Default values shown in BOLD)
0.00 - 99.95 MHz
(Differs depending on frequency)
AUTO / 5.00 KHz / 6.25 KHz / 10.00 KHz /
12.50 KHz / 15.00 KHz / 20.00 KHz /
25.00 KHz / 50.00 KHz / 100.00 KHz
OFF / LOW / HIGH
A/B
OFF (disable the P button) / BAND SCOPE /
SCAN / HOME / DCS CODE /
TONE FREQ / RPT SHIFT / REVERSE /
TX POWER / SQL OFF / T-CALL / VOICE /
D_X / WX / S-LIST / MSG / REPLY /
M-EDIT
P1: SQL OFF (T-CALL: European version)
P2: HOME
P3: D_X
P4: TX POWER
NORMAL / WIDE
METRIC / INCH
(Depends on the transceiver version)
OFF / 0.5 hour - 12.0 hour
OFF / 1 min - 5 min - 30 min
0000 - 9999 6111
WGS-84 / TOKYO MEAN
INTERNAL / EXTERNAL
OFF / 1 sec - 60 sec
SPEED: 4800 bps / 9600 bps /
19200 bps / 38400 bps / 57600 bps
OUTPUT: OFF (camera) /
GPS OUT / PACKET / WAYPOINT
WP FORMAT: NMEA 6 / NMEA 7 /
NMEA 8 / NMEA 9
WP FILTER: ALL / MOBILE /
FREQUENCY / OBJECT/ITEM /
DIGIPEATER / VoIP / WEATHER /
YAESU / CALL RINGER / RNG RINGER
APRS: MAIN BAND / SUB BAND /
A-BAND FIX / B-BAND FIX /
A=TX/B=RX / A=RX/B=TX
DATA: MAIN BAND / SUB BAND / A-BAND
FIX / B-BAND FIX / A=TX/B=RX /
A=RX/B=TX
APRS: 1200 bps / 9600 bps
DATA: 1200 bps / 9600 bps
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Set-up Menu List
Menu / Item
DATA
APRS
DATA SQUELCH
APRS COMPASS
Explanation of
function
Squelch detection
setting
Available settings
(Default values shown in BOLD)
APRS: RX BAND / TX/RX BAND
DATA: RX BAND / TX/RX BAND
TX: ON / OFF
Customize Menu Settings and User Preferences
APRS compass display NORTH UP / HEADING UP
orientation
2 APRS DESTINATION
Model code display
APY400
Non-editable
3 APRS FILTER
Filter function setting
Mic-E: ON / OFF
POSITION: ON / OFF
WEATHER: ON / OFF
OBJECT: ON / OFF
ITEM: ON / OFF
STATUS: ON / OFF
OTHER: ON / OFF
RANGE LIMIT: 1 mi - 3000 mi / OFF
ALT.NET: ON / OFF
4 APRS MESSAGE TEXT Standard message text 1 to 8 ch
input
5 APRS MODEM
APRS function ON/OFF OFF / ON
setting
6 APRS MUTE
Band B AF mute setting OFF / ON
for APRS
7 APRS POP-UP
Display time setting
BEACON: OFF / 3 sec / 5 sec / 10 sec /
for pop-up display of
HOLD
beacons and messages MESSAGE: OFF / 3 sec / 5 sec / 10 sec /
HOLD
MYPACKET: OFF / ON
8 APRS POP-UP COLOR Screen color setting
CHECK OFF / GREEN / BLUE /
for pop-up display of
ORANGE / PURPLE / SKY-BLUE /
beacons
YELLOW / AMBER / WHITE
1 BEACON: CHECK OFF
2 MOBILE: CHECK OFF
3 OBJECT/ITEM: CHECK OFF
4 CAL RINGER: CHECK OFF
5 RNG RINGER: CHECK OFF
6 MESSAGE: CHECK OFF
7 GRP/BULT: CHECK OFF
8 MY PACKET: CHECK OFF
9 APRS RINGER
Bell sound setting at
TX BEACON: ON / OFF
beacon arrival
TX MESSAGE: ON / OFF
RX BEACON: ON / OFF
RX MESSAGE: ON / OFF
MY PACKET: ON / OFF
CALL RINGER: ON / OFF
RNG RINGER: 1km - 100km / OFF
MSG VOICE: ON / OFF
1 - 8 stations
10 APRS RINGER (CALL) Call sign setting for
CALL RINGER
167
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Set-up Menu List
Menu / Item
APRS
11 APRS TX DELAY
12 APRS UNITS
13 BEACON INFO
SELECT
14 BEACON STATUS
TEXT
15 BEACON TX
Customize Menu Settings and User Preferences
16 DIGI PATH SELECT
17 DIGI PATH 1
18 DIGI PATH 2
19 DIGI PATH 3
20 DIGI PATH 4
21 DIGI PATH FULL 1
22 DIGI PATH FULL 2
168
Explanation of
function
Available settings
(Default values shown in BOLD)
Data transmit delay time 100 ms / 150 ms / 200 ms / 250 ms /
setting
300 ms / 400 ms / 500 ms / 750 ms /
1000 ms
APRS display unit
1 POSITION: dd°mm.mm' / dd°mm'ss''
setting
2 DISTANCE: km / mile
3 SPEED: km/h / mph / knot
4 ALTITUDE: m / ft
5 BARO: hPa / mb / mmHg / inHg
6 TEMP: °C / °F
7 RAIN: mm / inch
8 WIND: m/s / mph / knot
Transmit beacon
AMBIGUITY: OFF / 1 - 4 digit
information setting
SPEED/COURSE: ON / OFF
ALTITUDE: ON / OFF
Status text input setting SELECT: TEXT 1 - 5 / OFF
TX RATE: 1/1 - 1/8 /
1/2 (FREQ) - 1/8 (FREQ)
TEXT 1 - 5: NONE / FREQUENCY /
FREQ & SQL & SHIFT
Beacon automatic
AUTO: OFF / ON
transmit / manual
INTERVAL: 30 sec - 60 min 5 min
transmission switch
PROPORTIONAL: ON / OFF
DECAY: ON / OFF
LOW SPEED: 1 - 99 3
RATE LIMIT: 5 sec - 180 sec 30 sec
Digital repeater route
OFF / WIDE 1-1 / WIDE 1-1,WIDE 2-1 /
setting
PATH 1 - PATH 4 / FULL 1 / FULL 2
Digital repeater route
ADDRESS 1: address setting
ADDRESS 2: ADDRESS 1: ADDRESS 2: ADDRESS 1: ADDRESS 2: ADDRESS 1: ADDRESS 2: Digital repeater route
ADDRESS 1: address setting
ADDRESS 2: ADDRESS 3: ADDRESS 4: ADDRESS 5: ADDRESS 6: ADDRESS 7: ADDRESS 8: ADDRESS 1: ADDRESS 2: ADDRESS 3: ADDRESS 4: ADDRESS 5: ADDRESS 6: ADDRESS 7: ADDRESS 8: -
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Set-up Menu List
Menu / Item
APRS
23 CALLSIGN (APRS)
24 MESSAGE GROUP
Explanation of
function
Available settings
(Default values shown in BOLD)
My call sign setting
Group filter setting for
received messages
Customize Menu Settings and User Preferences
GROUP 1: ALL✽✽✽✽✽✽
GROUP 2: CQ✽✽✽✽✽✽✽
GROUP 3: QST✽✽✽✽✽✽
GROUP 4: YAESU✽✽✽✽
GROUP 5: GROUP 6: BULLETIN 1: BLN?✽✽✽✽✽
BULLETIN 2: BLN?
BULLETIN 3: BLN?
25 MESSAGE REPLY
Automatic response
REPLY: OFF / ON
setting of received
CALLSIGN: ✽✽✽✽✽✽-✽✽
messages
REPLY TEXT: 26 MY POSITION SET
My position setting
GPS / MANUAL
27 MY POSITION
My position manual
LAT: N 0°00. 00' (' 00'')
setting
LON: E 0°00. 00' (' 00'')
28 MY SYMBOL
My symbol setting
ICON 1: [/>] Car
ICON 2: [/R] REC.Vehicle
ICON 3: [/-] House QTH (VHF)
USER: [YY] Yaesu Radios
29 POSITION COMMENT Position comment
Off Duty / En Route / In Service /
setting
Returning / Committed / Special / Priority /
Custom 0 - 6 / Emergency!
30 Smart Beaconing
Smart beaconing setting 1 STATUS: OFF / TYPE 1 / TYPE 2 /
TYPE 3
2 LOW SPEED: 2 - 30 5
3 HIGH SPEED: 3 - 90 70
4 SLOW RATE: 1 - 100 min 30 min
5 FAST RATE: 10 - 180 sec 120 sec
6 TURN ANGLE: 5 - 90° 28°
7 TURN SLOPE: 1 - 255 26
8 TURN TIME: 5 - 180 sec 30 sec
Sort function / filter
SORT: TIME / CALLSIGN / DISTANCE
31 SORT FILTER
function setting
FILTER : ALL / MOBILE / FREQUENCY /
OBJECT/ITEM / DIGIPEATER / VoIP /
WEATHER / YAESU / OTHER PACKET /
CALL RINGER / RANGE RINGER /
1200 bps / 9600 bps
Voice alert function
VOICE ALERT: NORMAL / TONE SQL /
32 VOICE ALERT
setting
DCS / RX-TSQL / RX-DCS
TONE SQL: 67.0 Hz - 254.1 Hz 100.0 Hz
DCS: 023 - 754 023
* Refer to the separate Operation Manual APRS Edition for details on the functions.
SD CARD
1 BACKUP
Reading and writing
Write to SD / Read from SD
information of the radio
to the micro-SD card
2 GROUP ID
Reading and writing
Write to SD / Read from SD
GROUP ID information
to the micro-SD card
169
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Set-up Menu List
Menu / Item
SD CARD
3 FORMAT
OPTION
1 USB CAMERA
Bluetooth
VOICE MEMORY
RESET/CLONE
1 FACTORY RESET
Customize Menu Settings and User Preferences
PRESET
RECALL PRESET
MEM CH RESET
MEM CH SORT
APRS RESET
7 CLONE
CALLSIGN
CALLSIGN
170
Explanation of
function
Available settings
(Default values shown in BOLD)
Initializing the micro-SD
card
Picture size / picture
quality setting for the
microphone with camera
Bluetooth headset
setting
Voice memory function
setting
PICTURE SIZE: 160 ✽ 120 / 320 ✽ 240
PICTURE QUALITY: LOW / NORMAL /
HIGH
AUDIO: AUTO / FIX
BATTERY: NORMAL / SAVE
VOX: ON /OFF
GAIN: HIGH / LOW
PLAY/REC: FREE 5 min / LAST 30 sec
ANNOUNCE: AUTO / OFF / MANUAL
LANGUAGE: JAPANESE / ENGLISH
VOLUME: HIGH / MID / LOW
RX MUTE: ON / OFF
Return all settings to
default settings when
shipped
Preset registration
Recall preset
Erasing registered
memory channels
Sorting registered
memory channels
Return APRS settings
to default settings when
shipped
Copy all saved data
This radio → other / Other → This radio
My call sign setting
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Screen display settings
Select the screen to be displayed
Set the type of screen to be displayed when pressing
1 Press for one second or longer
The set-up menu will be displayed.
briefly.
2 Touch [DISPLAY]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [1 DISPLAY SELECT]
The display setting screen will be displayed.
/'/14;
&+52.#;
&+52.#;
Ჹ
&+52.#;5'.'%6
Ż
Ჺ
6#4)'6.1%#6+10
%1/2#55
᲻
$#%-)4170&%1.14
1 4 #0)'
᲼
$#0&5%12'
9+&'
$#%-
Select from “ALTITUDE”, “TIMER/CLOCK” and “GPS
INFO”, the screen that you would like to display.
Each time the item is touched, the setting will switch
between “ON” and OFF”.
&+52.#;
Ჹ
&+52.#;5'.'%6
#.6+67&' 1 ((
6+/'4%.1%- 1 ((
)25+0(1 1 ((
$#%-
5 Set the other screens as well
Repeat Step 4 and set the other screens as well.
for one second or longer
The screen to be displayed will be set and the display will return to the previous
screen.
6 Press
Tip
Factory default value: All screens are set to “OFF”
Customize Menu Settings and User Preferences
4 Touch the item to be displayed
171
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Switching between COMPASS and POSITION INFORMATION screens
When using the GPS and GM functions, the screen will switch between the “Compass
Screen” and the “Position Information (Latitude and Longitude) Display Screen”.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [DISPLAY]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [2 TARGET LOCATION] to select the display
content
Each time this symbol is touched, the setting will
switch between “COMPASS” and “NUMERIC”.
COMPASS: The compass screen will be displayed.
NUMERIC: 
The position information (latitude and
longitude) display screen will be displayed.
Customize Menu Settings and User Preferences
Tip
/'/14;
&+52.#;
Ჹ
&+52.#;5'.'%6
Ż
Ჺ
6#4)'6.1%#6+10
%1/2#55
᲻
$#%-)4170&%1.14
1 4 #0)'
᲼
$#0&5%12'
9+&'
$#%-
Factory default value: COMPASS
4 Press
for one second or longer
The display contents will be set and the display will return to the previous screen.
Setting the display background color
The display background color can be selected from the following 5 colors.
• Orange • Green • Blue • Purple • Grey
Refer to “Changing the background color of the frequency display area” (
P.60) for details.
Setting the band scope display width
The frequency bandwidth and memory channel number to be displayed when band scope
is running can be set.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [DISPLAY]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
172
/'/14;
&+52.#;
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
3 Touch [4 BAND SCOPE] to select the frequency width
The frequency bandwidth will switch between “WIDE”
and “NARROW” each time this symbol is touched.
WIDE: 
The frequency bandwidth will be displayed
using a wide search width.
NARROW: The frequency bandwidth will be displayed
using a narrow search width.
Tip
VFO mode
Memory mode
WIDE
±25 steps
±25 channels
NARROW
±12 steps
±5 channels
᲻
$#%-)4170&%1.14
᲼
$#0&5%12'
1 4 #0)'
9+&'
$#%-
Factory default value: WIDE
4 Press
for one second or longer
The bandwidth of the frequency will be set and the display will return to the previous
screen.
Setting the display brightness
Setting the display contrast
The contrast of the touch panel can be adjusted.
Refer to “Adjusting the display contrast” ( P.58) for details.
Switching the time display and the voltage display
The display at the top right of the display can be changed between “Time Display” and
“Voltage Display”.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [DISPLAY]
5'672/'07
/'/14;
&+52.#;
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
Customize Menu Settings and User Preferences
The brightness of the touch panel can be set.
Refer to “Adjusting the display brightness” ( P.58) for details.
173
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
3 Touch [7 TIME/VDD] to select the display content
The display content changes between “TIME” and
“VDD” each time the symbol is touched.
TIME: The time will be displayed.
VDD: The voltage will be displayed.
Tip
Ჾ
.%&%1064#56
Ჿ
6+/'8&&
⌽
6+/'
$#%-
Factory default value: TIME
4 Press
for one second or longer
The display content will be set and the display will return to the previous screen.
Transmit and receive settings
Setting the signal format
The radio signal format can be selected from “FM”, “AM” and “NARROW FM” in the
analog mode.
Refer to “Changing the radio signal format” ( P.46) for details.
Setting the AMS transmission mode
Customize Menu Settings and User Preferences
When operating in the AMS function, the transmit mode may be selected:
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [TX/RX]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [DIGITAL]
174
/'/14;
&+52.#;
6:4:
/1&'
#761 (/
&+)+6#.
Ż
#7&+1
Ż
$#%-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : YAESU MUSEN CO., LTD.
Create Date                     : 2015:09:29 09:10:12+09:00
Modify Date                     : 2015:09:29 09:10:20+09:00
Subject                         : FCC / IC
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 09:10:20+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : OM
Description                     : FCC / IC
Creator                         : YAESU MUSEN CO., LTD.
Document ID                     : uuid:c4c722e7-9948-4d90-9626-1ad1993093d0
Instance ID                     : uuid:3943acd8-1b7a-49d2-8ecd-ff393de286e6
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 11

EXIF Metadata provided by EXIF.tools