Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

20345X40 User Manual >

User Manual 5

Download:
Mirror Download [FCC.gov]
Document ID	2766132
Application ID	+N0JnBurmEMmgtaAbixgVg==
Document Description	User Manual 5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	281.18kB (3514745 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-27 00:00:00
Creation Date	2015-09-29 09:03:49
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 09:04:31
Document Title	OM
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	YAESU MUSEN CO., LTD.

Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Communicating
2 Touch [CONFIG]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Turn
, or touch the screen to select [4 AUTO RPT
SHIFT]
Touch [4 AUTO RPT SHIFT] to select âONâ
The setting will switch between âONâ and âOFFâ each
time it is touched.
Press
for one second or longer
The automatic repeater shift will be set and the
display will return to the previous screen.
Tip
/'/14;
&+52.#;
á˛ť
6+/'<10'
á˛ź
#7614265*+(6
76%
 á˛¸ á˛¸
10
$#%-
The display can also be returned to the previous screen
by touching [BACK] twice.
Basic Operations
ââTone Calling (1750 Hz)
Press and hold in the program key [P1] of the microphone (MH-48) to generates a 1750
Hz burst tone to access the repeater. The transmitter will automatically be activated, and
a 1750 Hz audio tone will be superimposed on the carrier. Once access to the repeater
has been gained, you may release the [P1] key, and use the [PTT] for activating the
transmitter thereafter.
53
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Other Settings
Changing the beep volume
The volume of the confirmation beep that goes off when a key is pressed can be
adjusted.
1 Press
for one second or longer
The set-up menu will be displayed.
2 Touch [CONFIG]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [8 BEEP] to select the volume
Basic Operations
The volume changes in the following sequence each
time the screen is touched.
âOFFâ â âLOWâ â âHIGHâ
Tip
%10(+)
4265*+(6
4265*+(6(4'3
(/#/56'2
$''2
$#%-
4 Press
for one second or longer
The beep volume will be set and the display will
return to the previous screen.
Tip
54
Factory default value: LOW
The display can also be returned to the previous screen
by touching [BACK] twice.
/'/14;
&+52.#;
1((
 /*\
#761
.19
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Other Settings
Locking the knobs and switches
The knobs and switches etc. can be locked to avoid inadvertent changes and
unintended operation.
1 Press
quickly
âLOCKâ will appear in the display and the display will
return to the previous screen.
quickly one more time to cancel the lock.
Press
âUNLOCKâ will appear in the display and the display
will return to the previous screen.
8( 1
á˛š á˛źá˛˝ á˛žá˛¸á˛¸
á˛˝á˛¸á˛¸
61-;1 á˛ş á˛ť
á˛ź á˛ť á˛ť áł á˛ž á˛¸ á˛˝á˛¸
8 /
53.
/ 76' 5%12'
Basic Operations
55
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Other Settings
Adjusting the date and time
This radio has a built-in clock. Adjust the time before using.
1 Press
for one second or longer
The mode will change to the set-up mode.
2 Touch [CONFIG]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [1 DATA & TIME ADJUST]
The screen for setting the date and time will be
displayed.
/'/14;
&+52.#;
%10(+)
á˛š
'6+/'#&,756
á˛ş
'6+/'(14/#6
á˛ť
6+/'<10'
á˛ź
#7614265*+(6
Ĺť
Ĺť
76%
Basic Operations
$#%-
4 Touch [SET]
âMonthâ will blink.
%10(+)
á˛š
'6+/'#&,756
,7.  á˛š á˛ş  á˛ş á˛¸ á˛š á˛ş
á˛š á˛ź á˛ť á˛¸
5'6
$#%-
5 Touch [+] and [-] to set the month
á˛š
'6+/'#&,756
,7.  á˛š á˛ş  á˛ş á˛¸ á˛š á˛ş
á˛š á˛ź á˛ť á˛¸
5'6
$#%-
6 Touch [SET]
á˛š
'6+/'#&,756
#7)  á˛š á˛ş  á˛ş á˛¸ á˛š á˛ş
á˛š á˛ź á˛ť á˛¸
âDayâ will blink.
$#%-
56
 á˛¸ á˛¸
10
5'6
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Other Settings
7 Touch [+] and [-] to set the day
á˛š
'6+/'#&,756
#7)  á˛š á˛ş  á˛ş á˛¸ á˛š á˛ş
á˛š á˛ź á˛ť á˛¸
5'6
$#%-
8 Touch [SET]
á˛š
'6+/'#&,756
#7)  á˛ş á˛¸  á˛ş á˛¸ á˛š á˛ş
á˛š á˛ź á˛ť á˛¸
âYearâ will blink.
5'6
$#%-
9 Touch [+] and [-] to set the year
á˛š
'6+/'#&,756
#7)  á˛ş á˛¸  á˛ş á˛¸ á˛š á˛ş
á˛š á˛ź á˛ť á˛¸
5'6
$#%-
10 Touch [SET]
á˛š
'6+/'#&,756
#7)  á˛ş á˛¸  á˛ş á˛¸ á˛š á˛ť
á˛š á˛ź á˛ť á˛¸
âHourâ will blink.
5'6
$#%-
á˛š
'6+/'#&,756
#7)  á˛ş á˛¸  á˛ş á˛¸ á˛š á˛ť
á˛š á˛ź á˛ť á˛¸
5'6
$#%-
12 Touch [SET]
á˛š
'6+/'#&,756
#7)  á˛ş á˛¸  á˛ş á˛¸ á˛š á˛ť
á˛š á˛˝á˛ťá˛¸
âMinuteâ will blink.
5'6
$#%-
13 Touch [+] and [-] to set the minute
Basic Operations
11 Touch [+] and [-] to set the hour
á˛š
'6+/'#&,756
#7)  á˛ş á˛¸  á˛ş á˛¸ á˛š á˛ť
á˛š á˛˝á˛ťá˛¸
$#%-
5'6
57
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Other Settings
á˛š
14 Touch [SET]
'6+/'#&,756
#7)  á˛ş á˛¸  á˛ş á˛¸ á˛š á˛ť
á˛š á˛˝ á˛¸á˛¸
5'6
$#%-
15 Press
for one second or longer
The date and time will be set and the display will
return to the previous screen.
Tips â˘ The time will be displayed at the top right of the display.
â˘ You can also return to the previous screen by touching
[BACK] three times.
Tips
â˘ The accuracy of the clock is Âą30 seconds per month at normal temperature. The accuracy may
differ depending on the operating conditions such as temperature.
â˘ The time is automatically set when signals are received from the GPS.
â˘ When using this radio for the first time, the accuracy of the clock may occasionally be lower. In this
case, adjust the time again.
â˘ The calendar can display dates between Jan 1, 2000 and Dec 31, 2099.
Basic Operations
Adjusting the display brightness
The brightness and contrast of the touch panel can be adjusted.
1 Press
for one second or longer
The set-up menu will be displayed.
2 Touch [DISPLAY]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
58
/'/14;
&+52.#;
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Other Settings
3 Select [5 LCD BRIGHTNESS] and touch the screen
The screen for selecting the level will be displayed.
&+52.#;
á˛ź
$#0&5%12'
á˛˝
.%&$4+)*60'55
á˛ž
.%&%1064#56
á˛ż
6+/'8&&
9+&'
/ #:
â˝
6+/'
$#%-
4 Touch [+] and [-] to select the brightness level
The setting changes by one level each time the
screen is touched. The brightness level can be
selected from one of the following seven levels.
âMINâ, â2â, â3â, â4â, â5â, â6â and âMAXâ
Tip
Factory default value: MAX
&+52.#;
á˛˝
/+0
/#:
/#:
$#%-
5 Touch [BACK]
The brightness is set and the display returns to the
previous screen.
.%&$4+)*60'55
&+52.#;
á˛˝
.%&$4+)*60'55
/+0
$#%-
The screen for selecting the level will be displayed.
á˛˝
.%&$4+)*60'55
â
á˛ž
.%&%1064#56
â˝
á˛ż
6+/'8&&
6+/'
$#%-
7 Touch [+] and [-] to select the contrast level
The setting changes by one level each time the
screen is touched. The contrast level can be selected
from one of the following seven levels.
â-3â, â-2â, â-1â, â0â, â+1â, â+2â, â+3â
Tip
Factory default value: +3
&+52.#;
á˛ž
.%&%1064#56
  
Basic Operations
6 Select [6 LCD CONTRAST] and touch the screen
$#%-
8 Press
for one second or longer
The contrast is set and the display returns to the
previous screen.
Tip
The display can also be returned to the previous screen
by touching [BACK] twice.
59
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Other Settings
Changing the background color of the frequency display area
The background (shade) of the frequency display can be selected from five colors.
1 Press
for one second or longer
The set-up menu will be displayed.
2 Touch [DISPLAY]
The menu list will be displayed.
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 á˛° 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [3 BACKGROUND COLOR] to select the
Basic Operations
color
The setting changes in the following sequence each
time the screen is touched.
âORANGEâ â âGREENâ â âBLUEâ â âPURPLEâ â
âGRAYâ
Tip
for one second or longer
The background color is set and the display returns
to the previous screen.
Tip
60
Factory default value: ORANGE
4 Press
The display can also be returned to the previous screen
by touching [BACK] twice.
/'/14;
&+52.#;
&+52.#;
á˛š
&+52.#;5'.'%6
Ĺť
á˛ş
6#4)'6.1%#6+10
%1/2#55
á˛ť
$#%-)4170&%1.14
1 4 #0)'
á˛ź
$#0&5%12'
$#%-
9+&'

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : YAESU MUSEN CO., LTD.
Create Date                     : 2015:09:29 09:03:49+09:00
Modify Date                     : 2015:09:29 09:04:31+09:00
Subject                         : FCC / IC
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 09:04:31+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : OM
Description                     : FCC / IC
Creator                         : YAESU MUSEN CO., LTD.
Document ID                     : uuid:a5a55584-aae2-4e59-9756-35c0053cdc11
Instance ID                     : uuid:eeac3420-003e-4cab-aca2-b5c4bc9b1bb9
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 8

EXIF Metadata provided by EXIF.tools

Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

Contents

User Manual 5

FCC ID Filing: K6620345X40

Navigation menu

Namespaces

Views

Navigation