Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Download:
Mirror Download [FCC.gov]
Document ID	2766349
Application ID	+N0JnBurmEMmgtaAbixgVg==
Document Description	User Manual 14
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	335.66kB (4195778 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-27 00:00:00
Creation Date	2015-09-29 09:08:56
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 09:09:06
Document Title	OM
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	YAESU MUSEN CO., LTD.

Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Taking Pictures with the optional Camera (Snapshot Function)
Snapshots can be easily taken with the camera that is built into the optional speaker
microphone “MH-85A11U”.
The picture taken will appear on the display for several seconds and can also be
transmitted to other transceivers simply by pressing the transmit picture button on the
microphone.
Tips
• Refer to our YAESU website and catalog for the transceiver models that can transmit pictures.
• The picture transmit button on the microphone can only transmit picture data after the image has
been taken.
• The snapshot function will not operate unless the micro-SD card is inserted into the card slot on the
main body.
The picture taken will be saved in the micro-SD card inserted into the main body card slot.
The saved picture data can be transmitted to transceivers operating in the digital mode.
Connecting the speaker microphone with camera
1 Switch the power supply to the radio OFF
2 Connect the MH-85A11U to the main body
Functions to be Used when Necessary
Refer to the figure on the right to plug the connector
of the microphone into the [DATA] jack at the front of
the main body.
Caution
Check the direction of the connector and plug it in
all the way.
3 Referring to the figure, mount the provided
microphone cord holder to secure the MH-85A11U
cord to the main body.
Caution
Tip
Remove the screws at the side of the radio and
use the provided screw and washer to mount the
microphone cord holder.
As the microphone connector can be passed through the
microphone cord holder attached to the radio, there is no
need to remove it once it is mounted.
Cord
holder
Provided
washer
Remove
the screw
of the main
body
Provided
screw
4 Switch on the power supply to the main device
5 Press for one second or longer
The set-up menu will be displayed.
6 Touch [DATA]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
140
/'/14;
&+52.#;
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Taking Pictures with the optional Camera (Snapshot Function)
7 Touch [1 COM PORT SETTING]
The screen for the detailed settings will be displayed.
#
Ლ
%1/21465'66+0)
Ĺť
Ჺ
#$#0&5'.'%6
Ĺť
Ო
#52''&
Ĺť
#537'.%*
Ĺť
$#%-
8 Touch [OUTPUT] to select “OFF(camera)”
The setting changes as follows each time it is
touched.
“OFF(camera)” → “GPS OUT” → “PACKET” →
“WAYPOINT”
Tip
Factory default value: OFF (camera)
#
Ლ
%1/21465'66+0)
52''&
᳁ᲞᲸᲸDRU
176276 1(( ECOGTC
92(14/#6
0/'#
92(+.6'4
#..
$#%-
9 Press
for one second or longer
The display will return to the previous screen.
Tip
The display can also be returned to the previous screen by touching [BACK] twice.
Taking pictures
photographed and press the shutter button on the
microphone
Caution
Tip
Transmit
picture
button
Keep a focal distance of at least 50 cm between the
object and the camera. The picture will be out of
focus when the object is too near and the image will
not be clear.
In factory default, pictures will be taken with a size of 320
✽ 240 in the NORMAL picture quality.
The size (resolution) and quality (compression ratio) of the
picture can be set using “OPTION” → “1 USB CAMERA” in
the set-up menu ( P.200).
The picture taken will appear in the display for 10
seconds.
Subsequently, the picture will be stored in JPEG
format, on the microSD card that has been inserted
into the main body card slot.
While the picture appears in the display, touch
[BACK], [DEL] or [FORWARD], you can save the
data, delete or transfer it to other stations.
[BACK]:
Save the picture to the microSD card,
then return to the original screen.
Lens
Shutter
button
Functions to be Used when Necessary
1 Insert the micro-SD card and turn the radio ON
2 Point the camera lens at the object to be
141
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Taking Pictures with the optional Camera (Snapshot Function)
[DEL]:
Delete the picture*, then return to the original screen.*:Deleted
images, can be seen on the PC.
[FORWARD]: Send the picture to other transceivers.Press the microphone [PTT]
button to cancel the picture transmission (the picture will be stored in
the microSD card).
While the picture appears in the display, press the shutter button again, the picture
will be saved to the microSD card, then the pic-ture taken will appear in the display.
Tips • It takes about 30 seconds to transmit a picture taken with a resolution of 320 ✽ 240 to
another transceiver.
• Press the microphone [PTT] button to cancel the picture transmission (it may take a while for
the transmission to be canceled).
• After the picture is transmitted, the mode will automatically switch to DN of the AMS mode.
Tip
Functions to be Used when Necessary
142
The first picture taken will be saved under the filename “M✽✽✽✽✽000001.jpg” while the pictures
taken subsequently will be saved under the filenames “M✽✽✽✽✽000002.jpg”, “M✽✽✽✽✽000003.jpg”
and so on in increasing order.
The folder configuration in the micro-SD card is as follows and the data of the pictures taken is saved
in the folder named “PHOTO” under the root directory.
Root
FTM400D
BACKUP
GPSLOG
PHOTO
GM
PHOTO
QSOLOG
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Taking Pictures
Taking Pictures
with the
withoptional
the optional
Camera
Camera
(Snapshot
(SnapshotFunction)
Function)
Viewing a saved picture
1 Press
The function menu will be displayed.
2 Touch [LOG]
A list of the text messages or the pictures saved in
the micro-SD card will be displayed.
Tips • A list of the text messages will be displayed when the
touch key is [ ]. This will change to a list of pictures
when [ ] is touched.
8( 1
Ლ ᲟᲽ ᲞᲸᲸ
Ჽ Ჸ Ჸ /5)
6 1 - ;$'#%10
1 Ჺ Ო
5.+56
$'#%10
6:
᲼ ᲻ ᲻ ᳀. 1Ჾ) Ჸ Ჽ( 9Ჸ&
$ # % - *1/'
8 /
53.
/ 76' 5%12'
• The date and time the picture was taken will be used as
the tag of the picture.
• Newly taken pictures will be displayed at the top of the
list.
3 Select and touch the picture that you want to see
61,# Ლ ;1'6 # 41
The picture will appear after the message “Waiting...”
is shown.
᳂ Ჹ ᳂   Ჹ   Ჹ ᲼ Ჽ Ჾ
Ჺ ᳂ Ჹ ᳂  Ჺ ᲼ Ჹ  ᲼ Ჹ ᲻  Ჺ᲼
Ჺ ᳂ Ჹ ᳂ Ჺ  Ჹ ᳂  Ჹ Ჺ ᳂
$#%-
& ' . 61 2
• Touch [EDIT] at the top right of the screen to edit the
tag.
• Touch [DEL] to erase the picture from the micro-SD
card.
• Touch [FORWARD] or [REPLY] to send the picture to
other transceivers ( P.129).
4 Touch [BACK]
The display will return to the screen showing the list of pictures.
Tip
The pictures can be viewed on a personal computer by reading the contents of the micro-SD card into
the personal computer.
Caution
Functions to be Used when Necessary
Tips • Pictures taken with the resolution set to “320 ✽ 240”
(unit: pixel) in the set-up menu under “OPTION” → “1
USB CAMERA” → “PICTURE SIZE” will be displayed
in full screen when touched. After 10 seconds or when
the picture is touched again, it will return to the original
screen.
Ლ Ჿ Ჽ Ჺ
Ჺ ᳂ Ჹ ᳂ Ჾ Ჺ ᲼ Ჹ Ჾ ᲻ ᲼ Ჹ Ჾ᲻᲼
When the filename of the picture is changed on the personal computer, the picture can not longer be
shown in the display of the FTM-400XDR/DE.
143
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Optional receive Audio Record and Playback
The receive audio received can be recorded and then played back later using the
optional voice guide unit “FVS-2”.
The voice announcing the frequency of the operating band can also be heard when the
announce function is set to on.
Mounting the voice guide unit “FVS-2”
●●Preparations
• Voice guide unit “FVS-2” (optional)
• Plus driver
●●Mounting procedure
Cautions
zz Unless necessary, do not touch any parts with your hands as the semiconductors may be damaged
by static electricity.
zz Note that labor charges to install optional items by our company’s customer service support staff
shall be separately chargeable.
Functions to be Used when Necessary
1 Switch off the power supply to the radio
2 Switch off the external power supply
3 Unplug the control cable, microphone and DC power supply cable from the main
body
4 Remove the eight screws from the main body, four
144
on top and two each at the sides
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Optional receive Audio Record and Playback
5 Slowly lift up the front side of the top cover of the
main body
Caution
Do not lift up the top cover by force. This may result
in cables connected to the boards inside the main
body and the speaker inside the cover to be cut.
6 Unplug the speaker cables extending from the top
cover from the socket of the board inside the main
body first before removing the cover
Caution
Hold the connector when unplugging the cable
without pulling the cable itself.
7 Refer to the figure on the right to mount the FVS-2
Caution
Connector for FVS-2
8 Plug in the speaker cables extending from the main body top cover to the original
socket on the board
Attach the main body top cover and secure using the screws eight
Functions to be Used when Necessary
Check the direction of the connector and plug the
FVS-2 in all the way to the back.
145
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Optional receive Audio Record and Playback
Using the voice memory
The voice memory is a function for recording the audio received. The audio is saved in
FVS-2 that is mounted to the radio. The saved audio can be replayed on the radio and
erased later.
Setting the voice memory operation
1 Switch on the power supply to the radio
2 Press for one second or longer
The set-up menu will be displayed.
3 Touch [OPTION]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
4 Select and touch [3 VOICE MEMORY]
The screen for the detailed settings will be displayed.
/'/14;
&+52.#;
126+10
Ლ
75$%#/'4#
Ĺť
Ჺ
$ Ჴ WGVQQVJ
Ĺť
Ო
81+%'/'/14;
Ĺť
Functions to be Used when Necessary
$#%-
5 Touch [PLAY/REC] to set the recording time
The setting will switch between “FREE 5min” and
“LAST 30sec” each time it is touched.
“FREE 5min”: A total of 5 minutes of audio in 8
recording areas can be recorded.
“LAST 30sec”: The last 30 seconds will be recorded.
Tip
Factory default value: FREE 5 min
6 Press
146
for one second or longer
The display will return to the previous screen.
126+10
81+%'/'/14;
2.#;4'% (4''OKP
#00170%' /#07#.
.#0)7#)' ,#2#0'5'
81.7/'
4:/76'
$#%-
10
*+)*
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Optional receive Audio Record and Playback
Recording the receive audio
1 Press
The function menu will be displayed.
2 Touch [REC]
The recording will be started.
Tips • W
 hen [REC] is not displayed in the menu, use [BACK]
or [FWD] to switch the menu.
• Set the recording time set using “OPTION” → “3
VOICE MEMORY” in the set-up menu will be displayed
under [REC].
4'%
2.#;64#%#. .
$#%-
2.#;
%.4 81+%'
5612
(9&
3 Touch [STOP]
The recording will stop.
The track number of the audio recorded will be
displayed under [PLAY TRACK] .
4'%
2.#;64#%#. .
$#%-
4'%
2.#;64#%
2.#;
%.4 81+%'
5612
(9&
5612
(9&
4 Press
The display will return to the previous screen.
Replaying the recorded audio
1 Press
The function menu will be displayed.
2 Touch [PLAY/REC] to select the track number to be
replayed
Tips • This is not available if there is only one recording.
• When there are two or more recordings, the track
number will change in the order “ALL”, “1”, “2”… each
time it is touched.
4'%
2.#;64#%
$#%-
2.#;
%.4 81+%'
5612
Functions to be Used when Necessary
$#%-
2.#;
%.4 81+%'
(9&
• All recorded tracks will be replayed in sequence when
“ALL” is selected.
147
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Optional receive Audio Record and Playback
3 Touch [PLAY]
Replay will be started.
The replay will stop automatically at the end of the
selected track.
4'%
2.#;64#%
$#%-
2.#;
%.4 81+%'
5612
(9&
Touch [STOP] to stop the replay.
4'%
2.#;64#%
$#%-
2.#;
%.4 81+%'
5612
(9&
4 Press
The display will return to the previous screen.
Erasing the recorded audio
1 Press
The function menu will be displayed.
Functions to be Used when Necessary
2 Touch [CLR]
The confirmation screen will be displayed.
4'%
2.#;64#%
$#%-
2.#;
%.4 81+%'
5612
(9&
3 Touch [OK?]
Erasure will be started.
Caution
All recorded audio will be erased. When there are
two or more recordings, the track number to be
erased cannot be chosen.
4'% %.'#4
2.#;64#%#..4'%
#
2.#;
$#%-
5612
1-!
%CPEGᲴ ( 9 &
2.#;64#%-
2.#;
%.4 81+%'
When the recordings are erased, [ALL] will be
displayed under [PLAY TRACK].
4'%
#. .
$#%-
4 Press
The display will return to the previous screen.
148
%.4 81+%'
5612
(9&
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Optional receive Audio Record and Playback
Listening to the frequency voice announcement
Setting the announce function operation
Set the following voice announcement parameters.
• Automatically reading out the frequency or not
• Reading out the frequency in English or Japanese
• Reading out aloud
• Mute the receive audio during a voice announcement or replaying recorded audio.
1 Press
for one second or longer
The set-up menu will be displayed.
2 Touch [OPTION]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Select and touch [3 VOICE MEMORY]
The screen for the detailed settings will be displayed.
/'/14;
&+52.#;
126+10
Ლ
75$%#/'4#
Ĺť
Ჺ
$ Ჴ WGVQQVJ
Ĺť
Ო
81+%'/'/14;
Ĺť
4 Touch [ANNOUNCE] to select the condition for
reading out of the frequency
The setting will switch between “AUTO”, “OFF” and
“MANUAL” each time it is touched.
“AUTO”: The frequency is read out when the band is
changed after touching [VOICE].
“OFF”: The frequency is not read out.
“MANUAL”: The frequency is read out when [VOICE]
is touched.
Tip
126+10
2.#;4'% (4''OKP
#00170%' #761
.#0)7#)' ,#2#0'5'
81.7/'
4:/76'
*+)*
10
$#%-
Factory default value: AUTO
5 Touch [LANGUAGE] to select the language in which
to read out the frequency
The setting will switch between “ENGLISH” and
“JAPANESE” each time it is touched.
Tip
81+%'/'/14;
Factory default value: ENGLISH
Functions to be Used when Necessary
$#%-
126+10
81+%'/'/14;
2.#;4'% (4''OKP
#00170%' #761
.#0)7#)' ,#2#0'5'
81.7/'
4:/76'
*+)*
10
$#%-
149
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Optional receive Audio Record and Playback
6 Touch [VOLUME] to select the announcement volume
The setting will switch between “HIGH”, “MID” and
“LOW” each time it is touched.
Tip
Factory default value: HIGH
126+10
81+%'/'/14;
2.#;4'% (4''OKP
#00170%' #761
.#0)7#)' ,#2#0'5'
81.7/'
4:/76'
*+)*
10
$#%-
7 Touch [RX MUTE] to select ON/OFF
126+10
The setting will switch between “ON” and “OFF” each
time the symbol is touched.
ON: The receive audio will be muted during a voice
announcement or replaying recorded audio.
OFF: T
 he receive audio will not be muted during a voice
announcement or replaying recorded audio.
Tip
81+%'/'/14;
2.#;4'% (4''OKP
#00170%' #761
.#0)7#)' ,#2#0'5'
81.7/'
4:/76'
*+)*
10
$#%-
Factory default value: ON
8 Press
for one second or longer
The announce function operation will be set and the display will return to the previous
screen.
Listening to the frequency voice announcement
Functions to be Used when Necessary
(1) When the operation is set to “AUTO”
The frequency of the operating band will be automatically announced in the following
cases.
• When the VFO mode and memory mode are switched
• When the operating band is changed
Tips
• The frequency will also be announced when [VOICE] is touched.
• The volume may be adjusted by turning
of the operating band.
(2) When the operation is set to “MANUAL”
1 Press
The function menu will be displayed.
2 Touch [VOICE]
The frequency of the operating band will be
announced.
4'%
2.#;64#%#. .
$#%-
Tip
The volume can also be adjusted by turning
150
of the operating band.
2.#;
%.4 81+%'
5612
(9&

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : YAESU MUSEN CO., LTD.
Create Date                     : 2015:09:29 09:08:56+09:00
Modify Date                     : 2015:09:29 09:09:06+09:00
Subject                         : FCC / IC
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 09:09:06+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : OM
Description                     : FCC / IC
Creator                         : YAESU MUSEN CO., LTD.
Document ID                     : uuid:faa13381-763c-4b76-a195-b97898d46ff2
Instance ID                     : uuid:38790556-0ead-4a1b-95aa-f1e2ebbf3a50
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 11

EXIF Metadata provided by EXIF.tools