Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Download:
Mirror Download [FCC.gov]
Document ID	2766355
Application ID	+N0JnBurmEMmgtaAbixgVg==
Document Description	User Manual 20
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	208.57kB (2607135 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-27 00:00:00
Creation Date	2015-09-29 09:16:33
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 09:16:41
Document Title	OM
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	YAESU MUSEN CO., LTD.

Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
5 Touch [OUTPUT] to select the output function of the
COM port
The setting changes as follows each time it is
touched.
“OFF(camera)” → “GPS OUT” → “PACKET” →
“WAYPOINT”
OFF (camera): The output function of the COM port
is not used (invalid operation).
GPS OUT: O
 utputs the GPS data obtained by the
radio.
PACKET: Outputs the AX.25 packet communication
data received using the in-built modem
function.
WAYPOINT: O
 utputs the position information of
other station beacons obtained from the
APRS packets received as WAYPOINT
data.
Tip
#
Ლ
Customize Menu Settings and User Preferences
194
᳁ᲞᲸᲸDRU
176276 1(( ECOGTC
92(14/#6
0/'#
92(+.6'4
#..
$#%-
Factory default value: OFF (camera)
6 Touch [WP FORMAT] to select the data format
This sets the number of digits in the call sign
information of the APRS beacon station appended
to each data when “WAYPOINT” is selected in Step
5 (the data will be output using the NMEA-0183
$GPWPL format).
The setting changes as follows each time it is
touched.
“NMEA 9” → “NMEA 8” → “NMEA 7” → “NMEA 6”
NMEA 9: The call sign will be limited to 9 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “JQ1YBG-14”).
NMEA 8: The call sign will be limited to 8 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “Q1YBG-14”).
NMEA 7: The call sign will be limited to 7 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “1YBG-14”).
NMEA 6: The call sign will be limited to 6 digits on the
right (Example: The call sign information for
JQ1YBG-14 is “YBG-14”).
Tip
%1/21465'66+0)
52''&
Factory default value: NMEA 9
#
Ლ
%1/21465'66+0)
52''&
᳁ᲞᲸᲸDRU
176276 9#;21+06
92(14/#6
0/'#
92(+.6'4
#..
$#%-
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
7 Touch [WP FILTER] to select the forwarding content
Tip
#
Ლ
%1/21465'66+0)
52''&
᳁ᲞᲸᲸDRU
176276 9#;21+06
92(14/#6
0/'#
92(+.6'4
#..
$#%-
Factory default value: ALL
8 Press
for one second or longer
The COM port will be set and the display will return to the previous screen.
Customize Menu Settings and User Preferences
This sets the type of beacon that you would like to
output when “WAYPOINT” is selected in Step 5.
The setting changes as follows each time it is
touched.
“ALL” → “MOBILE” → “FREQUENCY” → “OBJECT/
ITEM” → “DIGIPEATER” → “VoIP”→ “WEATHER” →
“YAESU” → “CALL RINGER” → “RNG RINGER”
ALL: O
 utputs all beacons received.
MOBILE: O
 utputs only mobile stations.
FREQUENCY: Outputs only the stations with
frequency information.
OBJECT/ITEM: O
 utputs only the object station or
item station.
 utputs only the digital repeater
DIGIPEATER: O
station.
VoIP: O
 utputs only VoIP stations such as WIRES.
WEATHER: O
 utputs only the weather station.
YAESU: Outputs only stations which are using Yaesu
transceivers.
CALL RINGER: Outputs only the information of the
call sign ringer station set using
[10 APRS RINGER (CALL)] in the
APRS set-up menu.
RNG RINGER: Outputs only the information of
the station deemed to be the
approaching station using the
[9 APRS RINGER] range ringer
function in the APRS set-up menu.
195
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Setting the operating band of the APRS and data communication
The operating band of the APRS (internal modem) and data communication (when using
the [DATA] jack at the back of the main body) can be set.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [DATA]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [2 DATA BAND SELECT]
The screen for the detailed settings will be displayed.
/'/14;
&+52.#;
#
Ლ
%1/21465'66+0)
Ĺť
Ჺ
#$#0&5'.'%6
Ĺť
Ო
#52''&
Ĺť
#537'.%*
Ĺť
$#%-
Customize Menu Settings and User Preferences
4 Touch [APRS] to select the APRS operating band
The setting changes as follows each time it is
touched.
“A-BAND FIX” → “B-BAND FIX” → “A=TX/B=RX” →
“A=RX/B=TX” → “MAIN BAND” → “SUB BAND”
A-BAND FIX: The upper band will be selected.
B-BAND FIX: The lower band will be selected.
A=TX/B=RX: Transmits using the upper band and
receives using the lower band.
A=RX/B=TX: R
 eceives using the upper band and
transmits using the lower band.
MAIN BAND: The main band will be selected.
SUB BAND: The sub-band will be selected.
Tip
#
$$#0&(+:
#
$$#0&(+:
$#%-
Factory default value: B-BAND FIX
5 Touch [DATA] to select the data transmission
operating band
Repeat Step 4 to set the data communication
operating band.
Tip
#$#0&5'.'%6
#245
#
#$#0&5'.'%6
#245
$$#0&(+:
#
$$#0&(+:
Factory default value: B-BAND FIX
$#%-
6 Press
196
for one second or longer
The operating band of the APRS and data communication will be set and the display
will return to the previous screen.
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Setting the baud rate of the APRS and data communication
The baud rate of the APRS (internal modem) and data communication (when using the
[DATA] jack at the back of the main body) can be set.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [DATA]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [3 DATA SPEED]
The screen for the detailed settings will be displayed.
/'/14;
&+52.#;
#
Ლ
%1/21465'66+0)
Ĺť
Ჺ
#$#0&5'.'%6
Ĺť
Ო
#52''&
Ĺť
#537'.%*
Ĺť
$#%-
speed
The setting will switch between “1200 bps” and “9600
bps” each time it is touched.
1200 bps: Sets the speed as AFSK 1200 bps packet.
9600 bps: Sets the speed as GMSK 9600 bps
packet.
Tip
#
DRU
#
DRU
$#%-
Factory default value: 1200 bps
5 Touch [DATA] to select the data communication
speed
Repeat Step 4 to set the data communication speed.
Tip
#52''&
#245
Factory default value: 1200 bps
#
#52''&
#245
DRU
#
DRU
$#%-
6 Press
for one second or longer
The baud rate of the APRS and data communication will be set and the display will
return to the previous screen.
Customize Menu Settings and User Preferences
4 Touch [APRS] to select the packet communication
197
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Setting the output condition of the squelch detection and squelch terminal
The squelch detection condition during APRS (internal modem) operation and squelch
terminal output condition of the data communication (when using the [DATA] jack at the
back of the main body) can be set.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [DATA]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [4 DATA SQUELCH]
The screen for the detailed settings will be displayed.
/'/14;
&+52.#;
#
Ლ
%1/21465'66+0)
Ĺť
Ჺ
#$#0&5'.'%6
Ĺť
Ო
#52''&
Ĺť
#537'.%*
Ĺť
$#%-
Customize Menu Settings and User Preferences
4 Touch [APRS] to select the squelch detection
condition during APRS operation using the internal
modem
The setting switches between “RX BAND” and “TX/
RX BAND” each time it is touched.
RX BAND: Transmission is not possible when the
receive band squelch is open.
TX/RX BAND: Transmission is not possible when
either the receive band or transmit
band squelch is open.
Tip
#
4:$#0&
#
4:$#0&
6:
198
10
$#%-
Factory default value: RX BAND
5 Touch [DATA] to select the output condition (during
reception) related to the squelch terminal inside the
[DATA] jack
The setting switches between “RX BAND” and “TX/
RX BAND” each time it is touched.
RX BAND: The SQL terminal becomes active when
the receive band squelch is open.
TX/RX BAND: The SQL terminal becomes active
when either the receive band or
transmit band squelch is open.
Tip
#537'.%*
#245
Factory default value: RX BAND
#
#537'.%*
#245
4:$#0&
#
4:$#0&
6:
$#%-
10
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
6 Touch [TX] to select the output condition (during
transmission) related to the squelch terminal inside
the [DATA] jack
Each time this is touched, the setting will switch
between “ON” and “OFF”.
ON: The SQL terminal becomes active during
transmission.
OFF: The SQL terminal does not become active
during transmission.
••The action to be taken when the reception band
specified using [DATA] under [2 DATA BAND
SELECT] in the DATA set-up menu is ready to
transmit is set here.
••When this is set to ON, transmission of external
devices such as TNC can be suppressed during
transmission.
Tip
#
#537'.%*
#245
4:$#0&
#
4:$#0&
6:
10
$#%-
Factory default value: ON
7 Press
APRS function settings
The APRS function of the radio is a data communication system for data such as
messages and station position using the APRS format.
Refer to the separate Operating Manual APRS Edition for details (download the manual
from the YAESU website).
Micro-SD card settings
Writing settings to the micro-SD card
Using a micro-SD card, the memory channels registered in the radio and the settings in
the set-up menu can be copied to another FTM-400XDR/DE.
The settings saved in the micro-SD card can also be downloaded into the radio.
Refer to “Copying the Radio Data to another transceiver” ( P.151) for details.
Customize Menu Settings and User Preferences
for one second or longer
The APRS and data communication squelch will be set and the display will return to
the previous screen.
199
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
Using the Set-up Menu
Writing group IDs to the micro-SD card
The group ID information registered in the radio can be written to a micro-SD card.
The group ID information saved in the micro-SD card can also be downloaded into the
radio.
Refer to the separate Operating Manual GM Edition for further details (download the
operating manual from the YAESU website).
Initializing the micro-SD card
Initialize the memory card when using a new micro-SD card.
Refer to “Initializing the micro-SD card” ( P.35) for details.
Optional device settings
Setting the image of the connected speaker microphone with camera
Customize Menu Settings and User Preferences
The image size and quality when taking pictures with the connected speaker
microphone with a camera (MH-85A11U) can be set.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [OPTION]
5'672/'07
6:4:
5+)0#.+0)
5%#0
9 Ჰ 4'5
%10(+)
#
#245
5&%#4&
126+1 0
4'5'6
%.10'
%#..5+)0
$#%-
3 Touch [1 USB CAMERA]
The screen for setting the image will be displayed.
••PICTURE SIZE: Sets the size of the picture to be
taken.
••PICTURE QUALITY: Sets the quality of the picture
to be taken.
126+1 0
Ლ
75$%#/'4#
Ĺť
Ჺ
$ Ჴ WGVQQVJ
Ĺť
Ო
81+%'/'/14;
Ĺť
$#%-
4 Touch [PICTURE SIZE] to set the picture size
The setting changes between “160✽120” and
“320✽240” each time it is touched.
Tip
• Factory default value: 320✽240 (unit: pixel)
• It takes about 30 seconds to sending a picture in the
size of 320✽240 to other transceivers.
200
/'/14;
&+52.#;
126+1 0
Ლ
75$%#/'4#
2+%674'5+<'
 ᲸᜤᲸ
2+%674'37#.+6;
014/#.
$#%-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : YAESU MUSEN CO., LTD.
Create Date                     : 2015:09:29 09:16:33+09:00
Modify Date                     : 2015:09:29 09:16:41+09:00
Subject                         : FCC / IC
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 09:16:41+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Title                           : OM
Description                     : FCC / IC
Creator                         : YAESU MUSEN CO., LTD.
Document ID                     : uuid:dddc9853-40bf-4266-ab2a-3d4d8e938c26
Instance ID                     : uuid:cc177f7e-40a8-48c8-9663-f038bbe21488
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 7

EXIF Metadata provided by EXIF.tools