Fuji Film 02000002 Wireless LAN Module User Manual 00 LX22 OM 200 EN indb

Fuji Film Corporation Wireless LAN Module 00 LX22 OM 200 EN indb

UserManual.wiki >

Fuji Film >

02000002 User Manual >

[STC]User Manual_Part I HTML Version

[STC]User Manual_Part I

DIGITAL CAMERA

X-E2S

Owner’s Manual

Thank you for your purchase of this product. This

manual describes how to use your FUJIFILM X-E2S

digital camera. Be sure that you have read and un-

derstood its contents before using the camera.

■Product website:

http://fujifilm-x.com/x-e2s/

■Additional information may be found in online manuals available from:

http://fujifilm-dsc.com/manuals/

Before You Begin

First Steps

Basic Photography

and Playback

Basic Movie Recording

and Playback

The Q (Quick Menu) Button

More on Photography

and Playback

Menus

Connections

Technical Notes

Troubleshooting

BL00004738-200

Appendix

For Your Safety

• Read Instructions: All the safety and operating instructions

should be read before the appliance is operated.

• Retain Instructions: The safety and operating instructions

should be retained for future reference.

• Heed Warnings: All warnings on the appliance and in the

operating instructions should be adhered to.

• Follow Instructions: All operating and use instructions

should be followed.

Installation

Power Sources: This video product should be operated only

from the type of power source indicated on the marking la-

bel. If you are not sure of the type of power supply to your

home, consult your appliance dealer or local power com-

pany. For video products intended to operate from battery

power, or other sources, refer to the operating instructions.

Grounding or Polarization: This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will ﬁ t into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to ﬁ t, contact your

electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

Alternate Warnings: This video product is equipped with

a three-wire grounding-type plug, a plug having a third

(grounding) pin. This plug will only ﬁ t into a grounding-

type power outlet. This is a safety feature. If you are unable

to insert the plug into the outlet, contact your electrician to

replace your obsolete outlet. Do not defeat the safety pur-

pose of the grounding type plug.

Overloading: Do not overload wall outlets and extension

cords as this can result in a risk of ﬁ re or electric shock.

Ventilation: Slots and openings in the cabinet are provided

for ventilation, to ensure reliable operation of the video

product and to protect it from overheating, and these open-

ings must not be blocked or covered. The openings should

never be blocked by placing the video product on a bed,

sofa, rug, or other similar surface.

This video product should not be placed in a built-in instal-

lation such as a bookcase or rack unless proper ventilation

is provided or the manufacturer’s instructions have been

adhered to. This video product should never be placed near

or over a radiator or heat register.

Attachments: Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

Water and Moisture: Do not use this video product near wa-

ter—for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool,

and the like.

Power-Cord Protection: Power-supply cords should be routed

so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular at-

tention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

Accessories: Do not place this video product on an unstable

cart, stand, tripod, bracket, or table. The video product may

fall, causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand, tri-

pod, bracket, or table recommended by the manufacturer, or

sold with the video product. Any mounting of the appliance

should follow the manufacturer’s instructions, and should use

a mounting accessory recommended by the manufacturer.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

Antennas

Outdoor Antenna Grounding: If an outside antenna or cable

system is connected to the video product, be sure the anten-

na or cable system is grounded so as to provide some protec-

tion against voltage surges and built-up static charges. Sec-

tion 810 of the National Electrical Code, ANSI/NFPA No. 70,

provides information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

Antenna Lead

in Wire

Ground Clamp

Grounding Conductors

(NEC SECTION 810-21)

Power Service Grounding Electrode

System (NEC ART 250. PART H)

Antenna

Discharge Unit

(NEC SECTION

810-20)

Electric Service

Equipment

Ground Clamps

Power Lines: An outside antenna system should not be lo-

cated in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

Use

Cleaning: Unplug this video product from the wall outlet be-

fore cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

Object and Liquid Entry: Never push objects of any kind into this

video product through openings as they may touch dangerous

voltage points or short out parts that could result in a ﬁ re or elec-

tric shock. Never spill liquid of any kind on the video product.

Lightning: For added protection for this video product re-

ceiver during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

IMPORTANT SAFETY INSTRUCTIONS

iii

For Your Safety

Service

Servicing: Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualiﬁ ed service personnel.

Damage Requiring Service: Unplug this video product from

the wall outlet and refer servicing to qualiﬁ ed service per-

sonnel under the following conditions:

• When the power-supply cord or plug is damaged

• If liquid has been spilled, or objects have fallen into the

video product.

• If the video product has been exposed to rain or water.

• If the video product has been dropped or the cabinet has

been damaged.

If the video product does not operate normally follow the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualiﬁ ed technician to restore

the video product to its normal operation.

When the video product exhibits a distinct change in perfor-

mance — this indicates a need for service.

Replacement Parts: When replacement parts are required,

be sure the service technician has used replacement parts

speciﬁ ed by the manufacturer or have the same character-

istics as the original part. Unauthorized substitutions may

result in ﬁ re, electric shock or other hazards.

Safety Check: Upon completion of any service or repairs to

this video product, ask the service technician to perform

safety checks to determine that the video product is in

proper operating condition.

Be sure to read these notes before use

Safety Notes

• Make sure that you use your camera correctly. Read these

safety notes and your Owner’s Manual carefully before use.

• After reading these safety notes, store them in a safe place.

About the Icons

The icons shown below are used in this document to indi-

cate the severity of the injury or damage that can result if the

information indicated by the icon is ignored and the product

is used incorrectly as a result.

WARNING

This icon indicates that death or seri-

ous injury can result if the information

is ignored.

CAUTION

This icon indicates that personal injury

or material damage can result if the in-

formation is ignored.

The icons shown below are used to indicate the nature of the

instructions which are to be observed.

Triangular icons tell you that this information re-

quires attention (“Important”).

Circular icons with a diagonal bar tell you that the

action indicated is prohibited (“Prohibited”).

Filled circles with an exclamation mark indicate an

action that must be performed (“Required”).

WARNING

Unplug

from power

socket

If a problem arises, turn the camera o , remove the

battery, and disconnect and unplug the AC power

adapter. Continued use of the camera when it

is emitting smoke, is emitting any unusual odor,

or is in any other abnormal state can cause a ﬁ re

or electric shock. Contact your FUJIFILM dealer.

Do not allow water or foreign objects to enter the

camera. If water or foreign objects get inside the

camera, turn the camera oﬀ , remove the battery,

and disconnect and unplug the AC power adapt-

er. Continued use of the camera can cause a ﬁ re

or electric shock. Contact your FUJIFILM dealer.

Do not use in

the bathroom

or shower

Do not use the camera in the bathroom or shower.

This can cause a ﬁ re or electric shock.

Do not disas-

semble

Never attempt to change or take apart the camera

(never open the case). Failure to observe this pre-

caution can cause ﬁ re or electric shock.

Do not touch

internal parts

Should the case break open as the result of a fall or

other accident, do not touch the exposed parts. Fail-

ure to observe this precaution could result in elec-

tric shock or in injury from touching the damaged

parts. Remove the battery immediately, taking

care to avoid injury or electric shock, and take the

product to the point of purchase for consultation.

Do not change, heat or unduly twist or pull the con-

nection cord and do not place heavy objects on the

connection cord. These actions could damage the

cord and cause a ﬁ re or electric shock. If the cord

is damaged, contact your FUJIFILM dealer.

Do not place the camera on an unstable surface. This

can cause the camera to fall or tip over and cause

injury.

Never attempt to take pictures while in motion. Do

not use the camera while walking or driving. This

can result in you falling down or being involved in

a traﬃ c accident.

For Your Safety

WARNING

Do not touch any metal parts of the camera during

a thunderstorm. This can cause an electric shock

due to induced current from the lightning dis-

charge.

Do not use the battery except as speci ed. Load the

battery as shown by the indicator.

Do not heat, change or take apart the battery. Do not

drop or subject the battery to impacts. Do not store

the battery with metallic products. Any of these ac-

tions can cause the battery to burst or leak and

cause ﬁ re or injury as a result.

Use only batteries or AC power adapters speci ed for

use with this camera. Do not use voltages other than

the power supply voltage shown. The use of other

power sources can cause a ﬁ re.

If the battery leaks and  uid gets in contact with your

eyes, skin or clothing,  ush the a ected area with

clean water and seek medical attention or call an

emergency number right away.

Do not use the charger to charge batteries other than

those speci ed here. The supplied charger is for

use only with batteries of the type supplied with

the camera. Using the charger to charge conven-

tional batteries or other types of rechargeable

batteries can cause the battery to leak, overheat

or burst.

Using a  ash too close to a person’s eyes may cause

visual impairment. Take particular care when pho-

tographing infants and young children.

Do not use in the presence of  ammable objects, ex-

plosive gases, or dust.

When carrying the battery, install it in a digital cam-

era or keep it in the hard case. When storing the bat-

tery, keep it in the hard case. When discarding, cover

the battery terminals with insulation tape. Contact

with other metallic objects or batteries could

cause the battery to ignite or burst.

WARNING

Keep memory cards, hot shoes, and other small parts

out of the reach of small children. Children may

swallow small parts; keep out of reach of children.

Should a child swallow a small part, seek medical

attention or call emergency.

Keep out of reach of small children. Among the ele-

ments that could cause injury are the strap, which

could become entangled about a child’s neck,

causing strangulation, and the ﬂ ash, which could

cause visual impairment.

Follow the directions of airline and hospital person-

nel. This product generates radio-frequency

emissions that could interfere with navigational

or medical equipment.

CAUTION

Do not use this camera in locations a ected by oil

fumes, steam, humidity or dust. This can cause a

ﬁ re or electric shock.

Do not leave this camera in places subject to extremely

high temperatures. Do not leave the camera in

locations such as a sealed vehicle or in direct sun-

light. This can cause a ﬁ re.

Do not place heavy objects on the camera. This can

cause the heavy object to tip over or fall and

cause injury.

Do not move the camera while the AC power adapter

is still connected. Do not pull on the connection cord

to disconnect the AC power adapter. This can dam-

age the power cord or cables and cause a ﬁ re or

electric shock.

Do not cover or wrap the camera or the AC power

adapter in a cloth or blanket. This can cause heat

to build up and distort the casing or cause a ﬁ re.

When you are cleaning the camera or you do not plan

to use the camera for an extended period, remove

the battery and disconnect and unplug the AC power

adapter. Failure to do so can cause a ﬁ re or elec-

tric shock.

When charging ends, unplug the charger from the

power socket. Leaving the charger plugged into

the power socket can cause a ﬁ re.

When a memory card is removed, the card could come

out of the slot too quickly. Use your  nger to hold it

and gently release the card. Injury could result to

those struck by the ejected card.

Request regular internal testing and cleaning for

your camera. Build-up of dust in your camera

can cause a ﬁ re or electric shock. Contact your

FUJIFILM dealer to request internal cleaning every

two years. Please note that this service is not free

of charge.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

For Your Safety

The Battery and Power Supply

Note: Check the type of battery used in your camera and

read the appropriate sections.

The following describes the proper use of batteries and how

to prolong their life. Incorrect use can shorten battery life or

cause leakage, overheating, ﬁ re, or explosion.

Li-ion Batteries

Read this section if your camera uses a rechargeable

Li-ion battery.

The battery is not charged at shipment. Charge the battery

before use. Keep the battery in its case when not in use.

■Notes on the Battery

The battery gradually loses its charge when not in use.

Charge the battery one or two days before use.

Battery life can be extended by turning the camera oﬀ when

not in use.

Battery capacity decreases at low temperatures; a depleted

battery may not function at when cold. Keep a fully charged

spare battery in a warm place and exchange as necessary,

or keep the battery in your pocket or other warm place and

insert it in the camera only when shooting. Do not place

the battery in direct contact with hand warmers or other

heating devices.

■ Charging the Battery

Charge the battery in the supplied battery charger. Charg-

ing times will increase at ambient temperatures below

+10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt to

charge the battery at temperatures above 40 °C (+104 °F); at

temperatures below 0 °C (+32 °F), the battery will not charge.

Do not attempt to recharge a fully charged battery. The bat-

tery does not however need to be fully discharged before

charging.

The battery may be warm to the touch immediately after

charging or use. This is normal.

■Battery Life

At normal temperatures, the battery can be recharged about

300 times. A noticeable decrease in the length of time the

battery will hold a charge indicates that it has reached the

end of its service life and should be replaced.

■Storage

Performance may be impaired if the battery is left unused

for extended periods when fully charged. Run the battery

ﬂ at before storing it.

If the camera will not be used for an extended period, re-

move the battery and store it in a dry place with an ambient

temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do

not store in locations exposed to extremes of temperature.

■Cautions: Handling the Battery

• Do not transport or store with metal objects such as neck-

laces or hairpins.

• Do not expose to ﬂ ame or heat.

• Do not disassemble or modify.

• Use with designated chargers only.

• Dispose of used batteries promptly.

• Do not drop or subject to strong physical shocks.

• Do not expose to water.

• Keep the terminals clean.

• The battery and camera body may become warm to the

touch after extended use. This is normal.

■Disposal

Dispose of used batteries in accord with local regulations.

AC Power Adapters (Available Separately)

Use only FUJIFILM AC power adapters designated for use

with this camera. Other adapters could damage the camera.

• The AC power adapter is for indoor use only.

• Be sure the DC plug is securely connected to the camera.

• Turn the camera oﬀ before disconnecting the adapter.

Disconnect the adapter by the plug, not the cable.

• Do not use with other devices.

• Do not disassemble.

• Do not expose to high heat and humidity.

• Do not subject to strong physical shocks.

• The adapter may hum or become hot to the touch during

use. This is normal.

• If the adapter causes radio interference, reorient or relocate

the receiving antenna.

Using the Camera

• Do not aim the camera at extremely bright light sources,

such as the sun in a cloudless sky. Failure to observe this

precaution could damage the camera image sensor.

• Strong sunlight focused through the viewﬁ nder may dam-

age the panel of electronic viewﬁ nder (EVF). Do not aim

the electronic viewﬁ nder at the sun.

Take Test Shots

Before taking photographs on important occasions (such as

at weddings or before taking the camera on a trip), take a

test shot and view the results to ensure that the camera is

functioning normally. FUJIFILM Corporation can not accept

liability for damages or lost proﬁ ts incurred as a result of

product malfunction.

Notes on Copyright

Unless intended solely for personal use, images recorded us-

ing your digital camera system cannot be used in ways that

infringe copyright laws without the consent of the owner.

Note that some restrictions apply to the photographing of

stage performances, entertainments, and exhibits, even

when intended purely for personal use. Users are also asked

to note that the transfer of memory cards containing images

or data protected under copyright laws is only permissible

within the restrictions imposed by those copyright laws.

Handling

To ensure that images are recorded correctly, do not subject

the camera to impact or physical shocks while images are

being recorded.

For Your Safety

Liquid Crystal

In the event that the display is damaged, care should be

taken to avoid contact with liquid crystal. Take the urgent

action indicated should any of the following situations arise:

• If liquid crystal comes in contact with your skin, clean the

area with a cloth and then wash thoroughly with soap and

running water.

• If liquid crystal enters your eyes, ﬂ ush the aﬀ ected eye with

clean water for at least 15 minutes and then seek medical

assistance.

• If liquid crystal is swallowed, rinse your mouth thoroughly

with water. Drink large quantities of water and induce

vomiting, then seek medical assistance.

Although the display is manufactured using extremely high-

precision technology, it may contain pixels that are always lit

or that do not light. This is not a malfunction, and images

recorded with the product are unaﬀ ected.

Trademark Information

Digital Split Image is a trademark or registered trademark

of FUJIFILM Corporation. xD-Picture Card and E are

trademarks of FUJIFILM Corporation. The typefaces included

herein are solely developed by DynaComware Taiwan Inc.

Macintosh, QuickTime, and Mac OS are trademarks of Apple

Inc. in the U.S.A. and other countries. The Windows logo is a

trademark of the Microsoft group of companies. Wi-Fi® and

Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi

Alliance. Adobe and Adobe Reader are either trademarks or

registered trademarks of Adobe Systems Incorporated in the

U.S.A. and/or other countries. The SDHC and SDXC logos

are trademarks of SD-3C, LLC. The HDMI logo is a trademark.

YouTube is a trademark of Google Inc. All other trade names

mentioned in this manual are the trademarks or registered

trademarks of their respective owners.

Electrical Interference

This camera may interfere with hospital or aviation equip-

ment. Consult with hospital or airline staﬀ before using the

camera in a hospital or on an aircraft.

Color Television Systems

NTSC (National Television System Committee) is a color tele-

vision telecasting speciﬁ cation adopted mainly in the U.S.A.,

Canada, and Japan. PAL (Phase Alternation by Line) is a color

television system adopted mainly in European countries and

China.

Exif Print (Exif Version 2.3)

Exif Print is a newly revised digital camera ﬁ le format in

which information stored with photographs is used for opti-

mal color reproduction during printing.

IMPORTANT NOTICE: Read Before Using the Software

Direct or indirect export, in whole or in part, of licensed soft-

ware without the permission of the applicable governing

bodies is prohibited.

NOTICES

To prevent  re or shock hazard, do not expose the unit

to rain or moisture.

Please read the “Safety Notes” and make sure you un-

derstand them before using the camera.

Perchlorate Material—special handling may apply. See

http://www.dtsc.ca.gov/hazardouswaste/perchlorate.

vii

For Your Safety

For Customers in the U. S. A.

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

Contains IC : 7736B-02000002

Contains FCC ID : W2Z-02000002

FCC Statement: This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2)this device must accept any interference received, includ-

ing interference that may cause undesired operation.

CAUTION: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular in-

stallation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment oﬀ and on, the user is encouraged

to try to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀ erent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

FCC Caution: Any changes or modiﬁ cations not expressly ap-

proved by the party responsible for compliance could void

the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in con-

junction with any other antenna or transmitter.

Radiation Exposure Statement: This device meets the govern-

ment’s requirements for exposure to radio waves. This device is

designed and manufactured not to exceed the emission limits

for exposure to radio frequency (RF) energy set by the Federal

Communications Commission of the U.S. Government.

The exposure standard for wireless device employs a unit

of measurement known as the Speciﬁ c Absorption Rate, or

SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR

are conducted using standard operating positions accepted

by the FCC with the device transmitting at its highest certi-

ﬁ ed power level in all tested frequency bands.

Notes on the Grant: To comply with Part 15 of the FCC Rules,

this product must be used with a Fujiﬁ lm-speciﬁ ed ferrite-

core A/V cable, USB cable, and DC supply cord.

A lithium ion battery that is recyclable

powers the product you have purchased.

Please call 1-800-8-BATTERY for informa-

tion on how to recycle this battery.

For Customers in Canada

CAN ICES-3 (B)/NMB-3(B)

CAUTION: This Class B digital apparatus complies with Cana-

dian ICES-003.

Industry Canada statement: This device complies with RSS-

210 of the Industry Canada Rules. Operation is subject to

the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

This device and its antenna(s) must not be co-located or op-

erating in conjunction with any other antenna or transmit-

ter, except tested built-in radios. The County Code Selection

feature is disabled for products marketed in the US/ Canada.

Radiation Exposure Statement: The available scientiﬁ c

evidence does not show that any health problems are as-

sociated with using low power wireless devices. There is no

proof, however, that these low power wireless devices are

absolutely safe. Low power Wireless devices emit low levels

of radio frequency energy (RF) in the microwave range while

being used. Whereas high levels of RF can produce health

eﬀ ects (by heating tissue), exposure of low-level RF that does

not produce heating eﬀ ects causes no known adverse health

eﬀ ects. Many studies of low-level RF exposures have not

found any biological eﬀ ects. Some studies have suggested

that some biological eﬀ ects might occur, but such ﬁ ndings

have not been conﬁ rmed by additional research. X-Pro2 has

been tested and found to comply with IC radiation exposure

limits set forth for an uncontrolled environment and meets

RSS-102 of the IC radio frequency (RF) Exposure rules.

Disposal of Electrical and Electronic Equipment in Private Households

In the European Union, Norway, Iceland and

Liechtenstein: This symbol on the product, or in

the manual and in the warranty, and/or on its

packaging indicates that this product shall not

be treated as household waste. Instead it should

be taken to an applicable collection point for the

recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will

help prevent potential negative consequences to the en-

vironment and human health, which could otherwise be

caused by inappropriate waste handling of this product.

This symbol on the batteries or accumulators in-

dicates that those batteries shall not be treated

as household waste.

If your equipment contains easy removable batteries or

accumulators please dispose these separately according to

your local requirements.

The recycling of materials will help to conserve natural resourc-

es. For more detailed information about recycling this product,

please contact your local city oﬃ ce, your household waste

disposal service or the shop where you purchased the product.

In Countries Outside the European Union, Norway, Iceland and

Liechtenstein: If you wish to discard this product, including

the batteries or accumulators, please contact your local au-

thorities and ask for the correct way of disposal.

In Japan: This symbol on the batteries indicates

that they are to be disposed of separately.

viii

For Your Safety

Be sure to read these notes before use

Safety Notes

Thank you for your purchase of this product. For repair, inspection, and internal testing, con-

tact your FUJIFILM dealer.

• Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s

Manual carefully before use.

• After reading these safety notes, store them in a safe place.

About the Icons

The icons shown below are used in this document to indicate the severity of the injury or

damage that can result if the information indicated by the icon is ignored and the product

is used incorrectly as a result.

WARNING This icon indicates that death or serious injury can result if the informa-

tion is ignored.

CAUTION This icon indicates that personal injury or material damage can result if

the information is ignored.

The icons shown below are used to indicate the nature of the instructions which are to be

observed.

Triangular icons tell you that this information requires attention (“Important”).

Circular icons with a diagonal bar tell you that the action indicated is prohibited

(“Prohibited”).

Filled circles with an exclamation mark indicate an action that must be performed

(“Required”).

WARNING

Do not use in

the bathroom or

shower

Do not immerse in or expose to water. Failure to observe this precaution can cause

a ﬁ re or electric shock.

Do not disas-

semble

Do not disassemble (do not open the case). Failure to observe this precaution can

cause ﬁ re, electric shock, or injury due to product malfunction.

Do not touch

internal parts

Should the case break open as the result of a fall or other accident, do not touch the

exposed parts. Failure to observe this precaution could result in electric shock

or in injury from touching the damaged parts. Remove the camera battery

immediately, taking care to avoid injury or electric shock, and take the product

to the point of purchase for consultation.

WARNING

Do not place on unstable surfaces. The product may fall, causing injury.

Do not view the sun through the lens or camera view nders. Failure to observe this

precaution can cause permanent visual impairment.

CAUTION

Do not use or store in locations that are exposed to steam, or smoke or are very humid

or extremely dusty. Failure to observe this precaution can cause ﬁ re or electric

shock.

Do not leave in direct sunlight or in locations subject to very high temperatures, such

as in a closed vehicle on a sunny day. Failure to observe this precaution can cause

ﬁ r e .

Keep out of the reach of small children. This product could cause injury in the

hands of a child.

Do not handle with wet hands. Failure to observe this precaution can cause

electric shock.

Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into

the camera when the sun is in or close to the frame can cause ﬁ re or burns.

When the product is not in use, replace the lens caps and store out of direct sunlight.

Sunlight focused by the lens can cause ﬁ re or burns.

Do not carry the camera or lens while they are attached to a tripod. The product can

fall or strike other objects, causing injury.

For Your Safety

European Union regulatory notice

This product complies with the following EU Directives:

• RoHS Directive 2011/65/EU

• R & TTE Directive 1999/5/EC

Compliance with these directives implies conformity to applicable harmonized European

standards (European Norms) which are listed on the EU Declaration of Conformity issued by

FUJIFILM Corporation for this product or product family.

This compliance is indicated by the following conformity marking placed on the product:

This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g.

Bluetooth).

Regarding the Declaration of Conformity, visit http://www.fujifilm.com/products/digital_

cameras/x/fujifilm_x_e2s/pdf/index/fujifilm_x_e2s_cod.pdf.

IMPORTANT: Read the following notices before using the camera’s built-in wireless

transmitter.

QThis product, which contains encryption function developed in the United States, is con-

trolled by the United States Export Administration Regulations and may not be exported

or re-exported to any country to which the United States embargoes goods.

• Use only as part of a wireless network. FUJIFILM does not accept liability for damages result-

ing from unauthorized use. Do not use in applications requiring a high degree of reliability,

for example in medical devices or other systems that may directly or indirectly impact

human life. When using the device in computer and other systems that demand a greater

degree of reliability than wireless networks, be sure to take all necessary precautions to

ensure safety and prevent malfunction.

• Use only in the country in which the device was purchased. This device conforms to regulations

governing wireless network devices in the country in which it was purchased. Observe all

location regulations when using the device. FUJIFILM does not accept liability for prob-

lems arising from use in other jurisdictions.

• Wireless data (images) may be intercepted by third parties. The security of data transmitted

over wireless networks is not guaranteed.

• Do not use the device in locations subject to magnetic  elds, static electricity, or radio interference.

Do not use the transmitter in the vicinity of microwave ovens or in other locations subject

to magnetic ﬁ elds, static electricity, or radio interference that may prevent reception of

wireless signals. Mutual interference may occur when the transmitter is used in the vicinity

of other wireless devices operating in the 2.4GHz band.

• The wireless transmitter operates in the 2.4GHz band using DSSS and OFDM modulation.

Wireless Network Devices: Cautions

• This device operates on the same frequency as commercial, educational, and medical devices and

wireless transmitters. It also operates on the same frequency as licensed transmitters and

special unlicensed low-voltage transmitters used in RFID tracking systems for assembly

lines and in other similar applications.

• To prevent interference with the above devices, observe the following precautions. Conﬁ rm that

the RFID transmitter is not in operation before using this device. Should you observe that

the device causes interference in licensed transmitters used for RFID tracking, immedi-

ately stop using the aﬀ ected frequency or move the device to another location. If you

notice that this device causes interference in low-voltage RFID tracing systems, contact a

FUJIFILM representative.

2.4DS/OF4 This sticker indicates that this device operates in the 2.4GHz

band using DSSS and OFDM modulation and may cause inter-

ference at distances of up to 40m.

About This Manual

Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information

on speci c topics, consult the sources below.

Table of Contents

.................................................

xii

Troubleshooting

................................................

135

The “Table of Contents” gives an overview of the

entire manual. The principal camera operations

are listed here.

Having a speci c problem with the camera?

Find the answer here.

Warning Messages and Displays

.........................

140

Restrictions on Camera Settings

..........................

151

Find out what’s behind that  ashing icon or error

message in the display.

See page 151 for restrictions on the options

available in each shooting mode.

Memory Cards

Pictures are stored on optional SD, SDHC, and SDXC memory cards (P 20), referred to in this manual as “memory

cards.”

Product Care

Camera body: For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body

after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform

the leather on the camera body. Any liquid on the camera should be removed immediately with a

soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then

gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece

of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning  uid has been applied. To

prevent dust entering the camera, replace the body cap when no lens is in place.

Image sensor: Dust can be removed from the image sensor using the V SENSOR CLEANING option in

the setup menu (P 110).

Interchangeable lenses: Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remain-

ing stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a

small amount of lens-cleaning  uid has been applied. Replace the front and rear caps when the lens

is not use.

xii

Table of Contents

For Your Safety ..................................................................................... ii

IMPORTANT SAFETY INSTRUCTIONS .........................................ii

Safety Notes .......................................................................................iii

NOTICES ...............................................................................................vi

Safety Notes .....................................................................................viii

About This Manual .............................................................................x

Product Care ........................................................................................xi

Before You Begin

Symbols and Conventions ..............................................................1

Supplied Accessories ........................................................................1

Parts of the Camera ...........................................................................2

The Selector ........................................................................................5

The Command Dial ..........................................................................5

The AUTO (Auto Mode) Button ...................................................6

Camera Displays ................................................................................7

Shooting: View nder/LCD Monitor ........................................7

Playback: View nder/LCD Monitor .........................................9

Lenses ................................................................................................... 10

Parts of the Lens ............................................................................. 10

Removing the Caps ....................................................................... 10

Attaching the Hood ...................................................................... 10

Lenses with Aperture Rings ....................................................... 11

Lenses with No Aperture Rings ................................................ 11

Lenses with O.I.S. Switches ......................................................... 12

Manual Focus Lenses .................................................................... 12

First Steps

Attaching the Strap ........................................................................ 13

Attaching a Lens .............................................................................. 15

Charging the Battery ..................................................................... 16

Inserting the Battery and a Memory Card ........................... 17

Compatible Memory Cards ..................................................... 20

Turning the Camera on and O ................................................ 21

Basic Setup ......................................................................................... 22

Changing Basic Settings ............................................................. 23

Choosing a Display ......................................................................... 24

The View nder Display ................................................................ 25

Focusing the View nder ............................................................. 25

Adjusting Display Brightness .................................................... 25

The DISP/BACK Button ....................................................................... 26

View nder: Shooting ................................................................. 26

LCD Monitor: Shooting ............................................................. 26

Customizing the Standard Display ...................................... 27

View nder/LCD Monitor: Playback ...................................... 28

xiii

Table of Contents

Basic Photography and Playback

Taking Photographs ....................................................................... 29

Viewing Pictures .............................................................................. 31

Viewing Pictures Full Frame ....................................................... 31

Viewing Photo Information ....................................................... 32

Playback Zoom ............................................................................... 33

Multi-Frame Playback ................................................................... 34

Deleting Pictures ............................................................................. 35

Using the Flash ................................................................................. 36

Basic Movie Recording and Playback

Recording Movies ............................................................................ 38

Using an External Microphone ................................................. 39

Viewing Movies ................................................................................ 40

The Q (Quick Menu) Button

Using the Q Button ......................................................................... 41

The Quick Menu Display ............................................................. 41

Viewing and Changing Settings .............................................. 42

Editing the Quick Menu .............................................................. 43

The Fn (Function) Buttons

Using the Function Buttons ........................................................ 44

Assigning Roles to the Function Buttons ............................. 45

More on Photography and Playback

Mode Selection ................................................................................. 46

P, S, A, and M Modes ..................................................................... 46

Program AE (P) ............................................................................. 47

Shutter-Priority AE (S)................................................................ 48

Aperture-Priority AE (A) ............................................................ 49

Manual Exposure (M) ................................................................. 50

Auto Modes ...................................................................................... 51

SADVANCED SR AUTO ......................................................... 52

Long Time-Exposures (T/B) ......................................................... 53

Time (T) .............................................................................................. 53

Bulb (B) ............................................................................................... 53

Using a Remote Release .............................................................. 54

Exposure Compensation .............................................................. 55

Focus/Exposure Lock ..................................................................... 56

Metering .............................................................................................. 58

Film Simulation ................................................................................ 59

The DRIVE Button ............................................................................ 60

Continuous Shooting (Burst Mode) ........................................ 61

Bracketing ......................................................................................... 62

Panoramas ........................................................................................ 63

Viewing Panoramas ...................................................................... 65

Multiple Exposures ........................................................................ 66

Advanced Filter ............................................................................... 67

xiv

Table of Contents

Focus Mode ........................................................................................ 68

The Focus Indicator .................................................................... 69

MF Assist ......................................................................................... 70

Autofocus Options (AF Mode) .................................................. 71

Focus-Point Selection ................................................................... 72

Single Point AF ............................................................................. 72

Zone AF ........................................................................................... 73

Tracking (Focus Mode C Only) ................................................ 74

Sensitivity ........................................................................................... 75

AUTO ................................................................................................ 76

Recording Pictures in RAW Format ......................................... 77

Creating JPEG Copies of RAW Pictures .................................. 78

Using the Self-Timer ....................................................................... 79

Interval Timer Photography ....................................................... 81

White Balance ................................................................................... 82

Saving Settings ................................................................................. 84

Using a Mount Adapter ................................................................ 85

Mount Adapter Settings.............................................................. 85

Choosing a Focal Length ......................................................... 85

Distortion Correction ................................................................ 85

Color Shading Correction ........................................................ 86

Peripheral Illumination Correction ...................................... 86

PhotoBook Assist ............................................................................. 87

Creating a PhotoBook .................................................................. 87

Viewing Photobooks .................................................................... 88

Editing and Deleting Photobooks ........................................... 88

Image Search ..................................................................................... 89

Menus

Using the Menus: Shooting Mode ........................................... 90

Shooting Menu Options (Photographs) ............................... 90

d ADVANCED FILTER................................................................ 90

A SCENE POSITION ................................................................... 90

G AUTOFOCUS SETTING ........................................................ 90

N ISO .............................................................................................. 92

O IMAGE SIZE .............................................................................. 93

T IMAGE QUALITY .................................................................... 93

U DYNAMIC RANGE.................................................................. 93

P FILM SIMULATION ................................................................ 93

B SELF-TIMER .............................................................................. 94

o INTERVAL TIMER SHOOTING ............................................ 94

D WHITE BALANCE ................................................................... 94

f COLOR ....................................................................................... 94

q SHARPNESS ............................................................................. 94

r HIGHLIGHT TONE .................................................................. 94

s SHADOW TONE ..................................................................... 94

h NOISE REDUCTION ............................................................... 94

K LONG EXPOSURE NR ........................................................... 94

j LENS MODULATION OPTIMIZER ..................................... 94

u SELECT CUSTOM SETTING ................................................ 95

K EDIT/SAVE CUSTOM SETTING .......................................... 95

l MOUNT ADAPTOR SETTING ............................................. 95

m SHOOT WITHOUT LENS ...................................................... 95

c MF ASSIST ................................................................................ 95

v AE/AF-LOCK MODE .............................................................. 95

d AF-LOCK BUTTON ................................................................. 95

C PHOTOMETRY ........................................................................ 95

v INTERLOCK SPOT AE & FOCUS AREA ............................ 95

p FLASH SET-UP ........................................................................ 96

W MOVIE SET-UP ........................................................................ 96

Table of Contents

X FILM SIMULATION BKT ....................................................... 96

L IS MODE ................................................................................... 97

r WIRELESS COMMUNICATION ........................................... 97

e APERTURE SETTING ............................................................. 97

x SHUTTER TYPE ....................................................................... 98

Using the Menus: Playback Mode............................................ 99

Playback Menu Options .............................................................. 99

r WIRELESS COMMUNICATION ........................................... 99

j RAW CONVERSION ............................................................... 99

A ERASE ........................................................................................ 99

G CROP ........................................................................................100

e RESIZE .....................................................................................100

D PROTECT ................................................................................101

C IMAGE ROTATE ..................................................................... 101

B RED EYE REMOVAL ............................................................. 102

I SLIDE SHOW .........................................................................102

m PHOTOBOOK ASSIST ......................................................... 103

j MARK FOR UPLOAD TO ....................................................103

b IMAGE SEARCH .................................................................... 103

s PC AUTO SAVE .....................................................................104

K PRINT ORDER (DPOF) ........................................................ 104

V instax PRINTER PRINT ........................................................104

J DISP ASPECT .........................................................................104

The Setup Menu ............................................................................. 105

Using the Setup Menu ............................................................... 105

Setup Menu Options ..................................................................106

F DATE/TIME .............................................................................106

N TIME DIFFERENCE ............................................................... 106

Q a .............................................................................. 106

R RESET .......................................................................................106

o SOUND & FLASH ................................................................. 106

b SOUND SET-UP .................................................................... 107

A SCREEN SET-UP ....................................................................107

A SCREEN SET-UP (Continued) .......................................... 108

h BUTTON/DIAL SETTING....................................................109

I FOCUS RING ..........................................................................109

Z POWER MANAGEMENT .................................................... 109

V SENSOR CLEANING ............................................................ 110

t SAVE DATA SET-UP .............................................................110

J COLOR SPACE .......................................................................111

u EVF/LCD SETTING ............................................................... 111

r CONNECTION SETTING .................................................... 112

K FORMAT ..................................................................................113

Factory Defaults ............................................................................. 114

xvi

Table of Contents

Connections

Wireless Transfer ............................................................................ 117

Wireless Connections: Smartphones ...................................117

Wireless Connections: Computers ........................................ 117

Viewing Pictures on a Computer ............................................118

Windows .......................................................................................... 118

Macintosh .......................................................................................118

Connecting the Camera ............................................................ 119

Printing Pictures via USB ...........................................................121

Connecting the Camera ............................................................ 121

Printing Selected Pictures ........................................................121

Printing the DPOF Print Order ................................................122

Creating a DPOF Print Order....................................................123

WITH DATE s/ WITHOUT DATE .......................................... 124

RESET ALL .....................................................................................125

instax SHARE Printers .................................................................. 126

Establishing a Connection........................................................126

Printing Pictures ...........................................................................127

Viewing Pictures on TV ...............................................................128

Technical Notes

Optional Accessories....................................................................129

Accessories from FUJIFILM .......................................................129

Connecting the Camera to Other Devices ......................... 132

Caring for the Camera ................................................................. 133

Storage and Use ...........................................................................133

Traveling .......................................................................................... 133

Cleaning the Image Sensor .......................................................134

Troubleshooting

Problems and Solutions .............................................................135

Warning Messages and Displays ............................................ 140

Appendix

Memory Card Capacity ...............................................................143

Links .....................................................................................................144

FUJIFILM X-E2S Product Information ................................... 144

Firmware Updates .......................................................................144

Free FUJIFILM Apps .....................................................................144

Speci cations ..................................................................................145

Restrictions on Camera Settings ............................................ 151

Before You Begin

Symbols and Conventions

The following symbols are used in this manual:

Q This information should be read before use to ensure correct operation.

R Additional information that may be helpful when using the camera.

P Other pages in this manual on which related information may be found.

Menus and other text in the displays are shown in bold. In the illustrations in this manual, displays may

be simpli ed for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

NP-W126 rechargeable battery BC-W126 battery charger Body cap

• Protective covers (× 2)

• Shoulder strap

• Owner’s Manual (this manual)

Clip attaching tool Metal strap clips (× 2)

RIf you purchased a lens kit, check that a lens is included.

Parts of the Camera

For more information, refer to the page listed to the right of each item.

Before You Begin

Parts of the Camera

AShutter button ................................................ 30

BExposure compensation dial ........................... 55

CShutter speed dial ..........................47, 48, 49, 50

DHot shoe ...................................................37, 132

EFlash ............................................................... 36

FStrap eyelet ..................................................... 13

GConnector cover .......................54, 000, 121, 128

HFocus mode selector ..................................000 68

ILens signal contacts ........................................ 10

JLens release button ......................................... 15

KMicrophone ..................................................... 38

LAF-assist illuminator ..................................... 000

Self-timer lamp ............................................... 79

MON/OFF switch ............................................... 21

NFunction button (Fn7) .................................. 000

Movie-record button .......................................38

Wi-Fi button (playback mode) ...................... 117

OBattery chamber ............................................. 17

PMemory card slot ............................................ 18

QBattery latch ................................................... 17

RElectronic view nder (EVF) ............................. 24

SLCD monitor .................................................... 24

TCommand dial ................................................... 5

USpeaker ........................................................... 40

VCable channel cover for DC coupler

WBattery-chamber cover ................................... 17

XBattery-chamber cover latch ........................... 17

YTripod mount

ZMicro USB connector .........................54, 000 121

aHDMI mini connector .................................... 128

bMicrophone/remote release connector ......39, 54

cBody cap ......................................................... 15

dDiopter adjustment control ............................. 25

eEye sensor ....................................................... 24

fN ( ash pop-up) button ................................. 36

gQ (quick menu) button * .................................. 41

Quick menu edit/custom settings button

(press and hold) *........................................41, 84

RAW conversion button (playback mode) ....... 78

hIndicator lamp ................................................... 4

iAF-L (focus lock) button.......................68, 56, 95

jAE-L (exposure lock) button...................... 56, 95

kMENU/OK button ............................................. 5

X (control lock) button (press and hold) ......... 4

lFunction button (Fn3—Fn6)....................... 000

Selector ............................................................. 5

mDISP (display)/BACK button ........................... 26

nFunction button (Fn2) .................................. 000

AUTO (auto mode) button ............................ 000

b (delete) button (playback mode) ............... 35

oFunction button (Fn1) .................................. 000

AE (autoexposure) button ............................... 58

n (playback zoom out) button .................33, 34

pDRIVE button ......................... 38, 61, 63, 66, 67

k (playback zoom in) button ...................33, 34

qa (playback) button ..................................... 31

* In shooting mode, press and release to display quick menu or press and hold to display quick menu edit options. When quick

menu is displayed, press and hold to edit custom settings.

Parts of the Camera

The Indicator Lamp

The indicator lamp shows camera status as follows:

Indicator lamp

Camera status

Glows green

Glows green Focus locked.

Blinks green

Blinks green Blur, focus, or exposure warning. Picture can be taken.

Blinks green and orange

Blinks green and orange Recording pictures. Additional pictures can be taken.

Glows orange

Glows orange Recording pictures. No additional pictures can be taken at this time.

Blinks orange

Blinks orange Flash charging;  ash will not  re when picture is taken.

Blinks red

Blinks red Lens or memory error.

Indicator lamp

RWarnings may also appear in the display (P 140).

RThe indicator lamp remains o while the view nder is in use (P 24).

Control Lock

To prevent accidental operation of the selector and AE-L and AF-L buttons during shooting, press MENU/OK until

X is displayed. The controls can be unlocked by pressing MENU/OK until X is no longer displayed.

Before You Begin

Parts of the Camera

The Selector

Press the selector up (q),

right (e), down (r), or left

(w) to highlight items. The

up, left, right, and down but-

tons also double as the Fn3

(AF mode; P 000), Fn4 (film

simulation; P 000), Fn5 (flash

mode; P 000), and Fn6 (focus-frame selection;

P 000) buttons, respectively (P 000).

The Command Dial

Rotate the command dial to select op-

tions in the quick menu display

(P 000), view pictures (P 000), adjust the size

of the focus area (P 000), or choose a shutter

speed (P 000, 000, 000, 000, 000) or combina-

tion of shutter speed and aperture (program shift,

P 000).

Press the center of the command dial to

zoom in on the active focus area dur-

ing shooting (P 000) or playback (P 000), or

press and hold the center of the command dial

to choose a manual focus assist option (P 000).

Parts of the Camera

The AUTO (Auto Mode) Button

Press a function button (by default, Fn2/AUTO) button to select S ADVANCED SR AUTO mode or an

auto mode in which you can choose the scene. Press the button again to exit auto mode.

RAt default settings, AUTO MODE ON/OFF is assigned to the AUTO (Fn2) button, but it can be assigned to other

function buttons as desired (P 000).

RThe options available vary with the shooting mode and shooting conditions. See “Restrictions on Camera Set-

tings” (P 000) for more information.

QAUTO is displayed in red when auto mode

is selected.

Before You Begin

Parts of the Camera

Camera Displays

The following types of indicator may be displayed during shooting and playback. In the description

that follows, all available indicators are shown for illustrative purposes; the indicators actually displayed

vary with camera settings. Note that the LCD monitor and electronic view nder have di erent aspect

ratios.

■ Shooting: View nder/LCD Monitor

4000 5.6 400

Parts of the Camera

Focus check .....................................................000

Depth-of- eld preview .....................................49

Location data download status .......................000

Movie mode ....................................................000

Time remaining ..............................................000

Number of available frames ............................143

Image quality and size ......................................93

Date and time .................................................000

Focus frame ......................................................56

White balance ...................................................82

Film simulation .................................................59

Dynamic range .................................................93

Focus warning .................................... 4, 137, 140

Temperature warning .....................................142

Control lock .........................................................4

Sound and  ash indicator ............................... 106

Histogram .........................................................28

Distance indicator .............................................68

Battery level .....................................................21

Sensitivity .........................................................75

Exposure compensation/exposure indicator

................................................................... 50, 55

Aperture ............................................... 47, 49, 50

Shutter speed ....................................... 47, 48, 50

AE lock indicator .............................................000

Metering ...........................................................58

Shooting mode ...............................................000

Focus indicator ..................................................69

Manual focus indicator ...................................000

Focus mode ......................................................68

AF+MF indicator ............................................000

Shutter type....................................................000

Continuous mode .............................................61

Self-timer indicator ..........................................79

Microphone/remote release ............... 39, 54, 000

Flash mode .......................................................36

Flash compensation ........................................000

Virtual horizon ................................................000

* Shows “9999” if there is space for over 9999 frames.

Control Lock

Pressing a locked control (

4) displays a

icon.

Before You Begin

Parts of the Camera

■ Playback

100-0001

12/31/2050 10:00 AM

1/4000

5.6

400

Date and time .................................................000

Intelligent face detection indicator .................000

Red-eye removal indicator ..............................102

Advanced  lter .................................................67

Location data ..................................................000

Protected image .............................................101

Sound and  ash indicator ............................... 106

Frame number ................................................000

Gift image .........................................................31

Photobook assist indicator ................................87

DPOF print indicator .......................................123

Battery level .....................................................21

Image quality and size ......................................93

Film simulation .................................................59

Dynamic range .................................................93

White balance ...................................................82

Sensitivity .........................................................75

Exposure compensation ....................................50

Aperture ............................................... 47, 49, 50

Shutter speed ....................................... 47, 48, 50

Playback mode indicator...................................31

Movie icon ......................................................000

Mark for upload to ..........................................103

Rating ...............................................................31

Parts of the Lens

ALens hood

BMounting marks

CFocus ring

DZoom ring

EAperture ring

FO.I.S. switch

GAperture mode switch

H Lens signal contacts

IFront lens cap

JRear lens cap

Removing the Caps

Remove the caps as shown.

QLens caps may di er from those shown.

Attaching the Hood

When attached, lens hoods reduce glare and pro-

tect the front lens element.

Lenses

The camera can be used with lenses for the FUJIFILM X-mount.

Before You Begin

Lenses

Lenses with Aperture Rings

At settings other than A, you

can adjust aperture by rotating

the lens aperture ring (expo-

sure modes A and M).

Aperture ring

A161185.642.8

A161185.64

The Aperture Mode Switch

If the lens has an aperture mode switch, aperture can

be adjusted manually by sliding the switch to Z and

rotating the aperture ring.

Aperture ring

Aperture mode switch

Lenses with No Aperture Rings

The method used to adjust aperture can be se-

lected using the e APERTURE SETTING option

(P 97) in the shooting menu. When an option

other than AUTO is selected, aperture can be ad-

justed using the command dial.

RSelecting S.S for h BUTTON/DIAL SETTING>

COMMAND DIAL SETTING (P 000) allows the

command dial to be used to choose the shutter

speed (P 000, 000, 000, 000), the exposure time for

long time-exposures when the shutter-speed dial is

rotated to T (time), or, in program AE mode (mode

P), di erent combinations of shutter speed and ap-

erture (program shift, P 000).

RAssigning COMMAND DIAL SETTING to a func-

tion button makes it easy to switch between shutter

speed and aperture (P 000).

Lenses

Lenses with O.I.S. Switches

If the lens supports optical image stabilization

(O.I.S.), the image stabilization mode can be cho-

sen in the camera menus. To activate image sta-

bilization, slide the switch to ON.

O.I.S. switch

Manual Focus Lenses

Slide the focus ring to the front for

autofocus.

For manual focus, slide the focus ring

to the back and rotate it while check-

ing the results in the camera display.

The focus distance and depth-of- eld

indicators can be used to assist manual

focus. Note that manual focus may not

be available in all shooting modes.

The Depth-of-Field Indicator

The depth-of- eld indicator shows the approximate

depth of  eld (the distance in front of and behind the

focus point that appears to be in focus).

Distance

indicator

QThe camera does not display the focus distance when

the lens is in manual focus mode.

First Steps

Attaching the Strap

Attach the strap clips to the camera and then attach the strap.

Open a strap clip.

Use the clip attaching tool to open a strap clip,

making sure that the tool and clip are in the

orientations shown.

QKeep the tool in a safe place. You will need it to

open the strap clips when removing the strap.

Place the strap clip on an eyelet.

Hook the strap eyelet in the clip opening. Re-

move the tool, using the other hand to keep

the clip in place.

Pass the clip through the eyelet.

Rotate the clip fully through

the eyelet until it clicks

closed.

Attach a protective cover.

Place a protective cover over the eyelet as

shown, with the black side of the cover toward

the camera. Repeat Steps 1–4 for the second

eyelet.

Attaching the Strap

Insert the strap.

Insert the strap through a protective cover

and strap clip.

Fasten the strap.

Fasten the strap as shown. Repeat Steps 5–6

for the second eyelet.

QTo avoid dropping the camera, be sure the strap is

correctly secured.

First Steps

Attaching a Lens

Lenses attach as described below.

QCare is required to prevent dust entering the camera while attaching and removing lenses.

Remove the body and rear caps.

Remove the body cap from the camera and

the rear cap from the lens.

QDo not touch the camera’s internal parts.

Attach the lens.

Place the lens on mount, keeping the marks

on the lens and camera aligned, and then ro-

tate the lens until it clicks into place.

QDo not press the lens release button while at-

taching the lens.

Removing Lenses

To remove the lens, turn the

camera o , then press the lens

release button and rotate the

lens as shown.

Lens release button

QTo prevent dust accumulating on the lens or inside the

camera, replace the lens caps and camera body cap

when the lens is not attached.

Lenses and Other Optional Accessories

The camera can be used with lenses for the FUJIFILM

X-mount and the other accessories listed from page

129.

Charging the Battery

The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger.

Place the battery in the charger.

Place the battery in the supplied battery char-

ger as shown.

Battery charger

Battery

Charge lamp

Arrow

The camera uses an NP-W126 rechargeable bat-

tery.

RThe supplied AC cord is for use exclusively with

the supplied battery charger. Do not use the

supplied charger with other cords or the sup-

plied cord with other devices.

Plug the charger in.

Plug the charger into an indoor power outlet.

The charging indicator will light.

The Charging Indicator

The charging indicator shows battery charge sta-

tus as follows:

Charging

indicator

Battery status

Action

O

Battery not

inserted.

Insert the battery.

Battery fully

charged.

Remove the battery.

Battery charging.

—

Blinks

Battery fault.

Unplug the charger

and remove the

battery.

Charge the battery.

Remove the battery when charging is com-

plete. See the speci cations (P 149) for charg-

ing times (note that charging times increase

at low temperatures).

QUnplug the charger when it is not in use.

First Steps

Inserting the Battery and a Memory Card

The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC

memory cards (sold separately). After charging the battery, insert the battery and memory card as

described below.

1 Open the battery-chamber cover.

Slide the battery-chamber latch as shown and

open the battery-chamber cover.

QDo not open the battery-chamber cover when

the camera is on. Failure to observe this precau-

tion could damage image  les or memory cards.

QDo not use excessive force when handling the

battery-chamber cover.

2 Insert the battery.

Using the battery to keep the battery latch

pressed to one side, insert the battery con-

tacts  rst in the direction shown by the arrow.

Con rm that the battery is securely latched.

Battery latch

Arrow

QInsert the battery in the correct orientation. Do

not use force or attempt to insert the battery up-

side down or backwards. The battery will slide in

easily in the correct orientation.

Inserting the Battery and a Memory Card

3 Insert the memory card.

Holding the memory card in the orientation

shown, slide it in until it clicks into place at the

back of the slot.

Click

Q Be sure card is in the correct orientation; do not

insert at an angle or use force.

Q SD/SDHC/SDXC memo-

ry cards can be locked,

making it impossible to

format the card or to

record or delete images.

Before inserting a memory card, slide the write-

protect switch to the unlocked position.

4 Close the battery-chamber cover.

Write-protect switch

First Steps

Inserting the Battery and a Memory Card

Removing the Battery and Memory Card

Before removing the battery or memory card, turn

the camera o and open the battery-chamber cover.

To remove the battery, press

the battery latch to the side,

and slide the battery out of

the camera as shown.

Battery latch

To remove the memory card,

press it in and release it slowly.

The card can then be removed

by hand. When a memory card

is removed, the card could be

ejected too quickly. Use your

 nger to hold it and gently release the card.

Batteries

• Remove dirt from the battery terminals with a clean,

dry cloth. Failure to observe this precaution could

prevent the battery from charging.

• Do not a x stickers or other objects to the battery.

Failure to observe this precaution could make it im-

possible to remove the battery from the camera.

• Do not short the battery terminals. The battery could

overheat.

• Read the cautions in “The Battery and Power Supply”

(P v).

• Use only battery chargers designated for use with the

battery. Failure to observe this precaution could re-

sult in product malfunction.

• Do not remove the labels from the battery or attempt

to split or peel the outer casing.

• The battery gradually loses its charge when not in

use. Charge the battery one or two days before use.

Inserting the Battery and a Memory Card

■ Compatible Memory Cards

FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-

era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_

cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used

with xD-Picture Cards or MultiMediaCard (MMC) devices.

Memory Cards

• Do not turn the camera o or remove the memory card while the memory card is being formatted or data are

being recorded to or deleted from the card. Failure to observe this precaution could damage the card.

• Format memory cards before  rst use, and be sure to reformat all memory cards after using them in a computer

or other device. For more information on formatting memory cards, see page 113.

• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,

seek medical assistance immediately.

• miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card

may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do

not forcibly remove the card.

• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.

• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a H card or

better for movies and burst photography.

• Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete

this folder or use a computer or other device to edit, delete, or rename image  les. Always use the camera to

delete pictures; before editing or renaming  les, copy them to a computer and edit or rename the copies, not

the originals. Renaming the  les on the camera can cause problems during playback.

First Steps

Turning the Camera on and O

Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn

the camera o .

RPress the a button to start playback. Press the shutter button halfway to

return to shooting mode.

RThe camera will turn o automatically if no operations are performed for the

length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF (P 109). To reactivate the camera

after it has turned o automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then

back to ON.

RFor information on startup options, see page 109.

QFingerprints and other marks on the lens or view nder can a ect pictures or the view through the view nder.

Keep the lens and view nder clean.

Battery Level

After turning the camera on, check the battery level in the display.

Indicator

Description

O (white) Battery partially discharged.

M (white) Battery about two-thirds charged.

K (white) Battery about one-third charged. Charge as soon as possible.

J (red) Low battery. Charge battery.

A (blinks red) Battery exhausted. Turn camera o and recharge battery.

Basic Setup

A language-selection dialog is displayed the  rst time the camera is turned on. Set up the camera as

described below (you can reset the clock or change languages at any time using the F DATE/TIME

or Q a options in the setup menu; for information on displaying the setup menu, see page 106).

Choose a language.

START MENU

NOSET

ENGLISH

FRANCAIS

DEUTSCH

Highlight a language and press MENU/OK.

RPress DISP/BACK to skip the current step. Any steps you skip will be dis-

played the next time the camera is turned on.

Set the date and time.

NOSET

YY. MM. DD

DATE/ TIME NOT SET

1. 1

2016

2015

2014

2018

2017

Press the selector left or right to highlight the year, month, day, hour,

or minute and press up or down to change. To change the order in

which the year, month, and day are displayed, highlight the date for-

mat and press the selector up or down. Press MENU/OK to exit to shoot-

ing mode when settings are complete.

RIf the battery is removed for an extended period, the camera clock will be reset and the language-selection

dialog will be displayed when the camera is turned on.

First Steps

Basic Setup

Changing Basic Settings

To change the language or reset the clock:

Display the desired option.

Display the setup menu and select Q a to change the language or F DATE/TIME to

reset the clock (P 105).

Adjust settings.

To choose a language, highlight the desired option and press MENU/OK. To set the clock, press the

selector left or right to highlight the year, month, day, hour, or minute and press up or down to

change, then press MENU/OK once the clock has been set to your satisfaction.

Choosing a Display

The camera is equipped with an electronic view nder (EVF) and an LCD monitor (LCD). Follow the

steps below to choose a display.

Display the setup menu.

1.1 Press MENU/OK to display the

menu for the current mode.

1.2 Press the selector left to highlight

the tab for the current menu.

1.3 Press the selector down to high-

light the setup menu tab con-

taining u EVF/LCD SETTING.

1.4 Press the selector right to place

the cursor in the setup menu.

Select u EVF/LCD SETTING.

Highlight u EVF/LCD SETTING

and press MENU/OK.

Choose a display.

Highlight one of the following op-

tions and press MENU/OK.

Option

Description

EYE

SENSOR

Automatic

display selection

using eye sensor

LCD

EVF

LCD

LCD LCD monitor

only LCD

EVF

EVF View nder only

EVF

EVF ONLY

View nder only;

eye sensor turns

display on or o

EVF

The Eye Sensor

The eye sensor turns the view nder on when you put your eye to the view nder and turns

it o when you take your eye away (note that the eye sensor may respond to objects other

than your eye or to light shining directly on the sensor). If automatic display selection is

enabled, the LCD monitor will turn on when the view nder turns o .

Eye sensor

First Steps

Choosing a Display

The View nder Display

When ON is selected for A SCREEN SET-UP>

EVF AUTOROTATE DISPLAYS in the setup

(P 000)

, the indicators in the view nder

automatically rotate to match camera orientation.

4000 5.6 400

Orientation changed from “wide” to “tall”

4000 5.6 400

QThe display in the LCD monitor is una ected.

Focusing the View nder

The camera is equipped with diopter adjustment

in the range –4 to +2 m–1 to accommodate indi-

vidual di erences in vision. Rotate the diopter

adjustment control until the view nder display is

in sharp focus.

Diopter adjustment control

Adjusting Display Brightness

The brightness of the view nder and LCD moni-

tor can be adjusted using the options under

A SCREEN SET-UP. Choose EVF BRIGHTNESS

to adjust view nder brightness (P 000) or LCD

BRIGHTNESS to do the same for the LCD monitor

(P 000).

Fuji Film 02000002 Wireless LAN Module User Manual 00 LX22 OM 200 EN indb

Fuji Film Corporation Wireless LAN Module 00 LX22 OM 200 EN indb

Contents

[STC]User Manual_Part I

Navigation menu

Namespaces

Views

Navigation