Fujitsu Technology Solutions SCENIC6651 personal computer User Manual A26361 K520 Z100 4 7619

Fujitsu Technology Solutions GmbH personal computer A26361 K520 Z100 4 7619

Manual Scenic 600 Oct 99 part 7

System expansions
A26361-K520-Z100-4-7619 41
Installing/removing a chipcard reader
Open the system unit (see "Opening the system unit").
Installing a chipcard reader
Remove the protector panel at the front of the carrier.
Push the chipcard reader board into the guide rail of the carrier with the component's side
toward the panel.
Fix the board with the screw.
3
1
2
Fix the cable on the chipcard reader (1) and on the connector for the chipcard reader on the
system board (see the Technical Manual of the system board).
Lift the chipcard reader into the system unit (2).
Push the chipcard reader in the direction of the arrow (3) until it clicks into position. Press
downward and toward the drive cage while doing so.
iWith the chipcard reader connected, no devices may be connected to serial port 2.
System expansions
42 A26361-K520-Z100-4-7619
Removing a chipcard reader
2
3
1
4
Pull the cable off the chipcard reader (1) and off the connector for the chipcard reader on the
system board (see the Technical Manual of the system board).
Press on the clip (2).
Pull the chipcard reader in the direction of the arrow (3).
Lift the chipcard reader out of the system unit (4).
Installation opening for 2nd serial port
An installation opening for the 2nd serial port is provided on the back of the casing. As a result, this
means no board slot is occupied.
Insert a screwdriver into the opening and break out the pre-stamped installation opening by
moving back and forth.
System expansions
A26361-K520-Z100-4-7619 43
Extensions on the system board
Details of how and if you can upgrade the main memory or the processor of your PC are provided in
the Technical Manual for the system board. Below the necessary steps are described to enable you
to work on the system board.
Open the system unit (see „Opening the system unit“).
Upgrading main memory
Upgrade the memory as it is described in the Technical Manual for the system board.
Close the system unit (see "Assembling the system unit").
Replacing processor and lithium battery
To replace the processor and the lithium battery, you must remove the ventilation duct.
Removing ventilation duct
2
3
4
11
Press the clip together (1).
Lift the ventilation duct slightly (2) and guide the ventilation duct out of the guide holes (3).
Remove the ventilation duct from the unit (4).
You have free access to the locations.
Replacing processor
Make the desired expansions (see the Technical Manual for the system board).
System expansions
44 A26361-K520-Z100-4-7619
Replacing lithium battery
!Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery may be replaced only with an identical battery or with a type
recommended by the manufacturer.
Do not throw lithium batteries into the trashcan. It must be disposed of in accordance with
local regulations concerning special waste.
Make sure that you insert the battery the right way round. The plus pole must be on the
top!
1
23
+
++
+
Lift the contact (1) a few millimeters and remove the battery from its socket (2).
Insert a new lithium battery of the same type in the socket (3).
Installing ventilation duct
4
3
1
22
Lift the ventilation duct into the unit (1)
Press the clip together (2).
Insert the ventilation duct into the guide holes (3) in the power supply.
Push the ventilation duct downward until the clip engages (4).
Close the system unit (see "Assembling the system unit").
A26361-K520-Z100-4-7619 45
Technical data
Electrical data
Regulations complied with: EN 60950 / VDE 0805
UL 1950
CSA 22.2 No.950
Protection class: I
Rated voltage range: (selectable) 100 V to 125 V / 200 V to 240 V
Frequency: 50 Hz - 60 Hz
Max. rated current
• System unit with monitor socket:
• Monitor socket (output)
100 V -125 V/5.5 A
200 V -240 V/3.0 A
100 V -125 V/3 A
200 V -240 V/1.5 A
Maximum power draw in operation:
Minimum power draw in operation:
reduced by Windows 9x
Power management advanced_
Power draw in energy saving mode:
Power draw in the 'ready' status
< 60 W *)
< 35 W *)
< 30 W *)
< 5 W *)
Noise emission: Sound power level (L
WAd
) < 55 dB (A) *)
*) These values only apply for a SCENIC 600 with the configuration below. When additional or
other components are incorporated, the power consumption or the sound emission (LWAd) in
energy saving mode may exceed the requirements for the environment symbol ("Blue Angel")
(30 W or 55 dB).
Processor (512 Kbyte cache):
Main memory:
Floppy disk drive:
Hard disk drive:
CD-ROM drive:
Graphics:
LAN:
Pentium III Processor at 600 MHz
192 Mbytes
1.44 Mbytes
6.4 GByte
32fold
Matrox MGA G100 AGP
10/100 MBit Ethernet Controller onboard
Dimensions
Width/depth/height: 454 mm/475 mm/ 138 mm
Weight
in basic configuration ca. 11 kg (107.9 N) in basic configuration
Technical data
46 A26361-K520-Z100-4-7619
Environmental conditions
Environment class (3K2)
Environment class (2K2) DIN IEC 721 part 3-3
DIN IEC 721 part 3-2
Temperature:
• Operating (3K2)
• Transport (2K2) 15 °C .... 35 °C
-25 °C .... 60 °C
Condensation in operating must be avoided.
Clearance required to ensure adequate ventilation:
• left-hand side
• front
• rear
min. 200 mm
min. 200 mm
min. 200 mm
!Do not place several system units one above the other.
A26361-K520-Z100-4-7619 47
Index
2
2nd serial port, installation opening 42
A
Accessible drive
installing 34
removing 36
Accumulator, disposal 4
Activating, security measures 23
Alphanumeric keypad 20
Alt Gr key 21
Anti-theft protection 24
Assembling, PC 30
Audio input 11
Audio output 11
B
Battery 44
disposal 4
BIOS Setup 23
security functions 24
Board 3
installing 31
removing 31
C
Cable
connecting 10
disconnecting 10
Cabling, PC 10
Calculator keypad 20
Casing
assembling 30
opening 29
Casing lock 15
CD-ROM drive
indicator 19
installing 34
manual 28
removing 36
CE certificate 5
Changing
floppy disk drive 37
hard disk drive 38
lithium battery 44
Checking
rated voltage 14
Chipcard reader 11
Index
48 A26361-K520-Z100-4-7619
indicator 20
Class B Compliance Statement 5
Cleaning 8
Clearance 46
Configuration, BIOS-Setup 23
Connecting
cables 10
devices 10
keyboard 12
monitor 13
mouse 12
parallel port 12
power voltage 14
serial port 12
Connecting to power voltage 14
Contents of delivery 9
Control key 21
Courier 1
Ctrl key 21
Ctrl+Alt+Del 21
Cursor control keys 20
D
Dark screen 26
Data protection 23
Data, technical 45
Date, not correct 27
Devices
connecting 10
interface 11
Dimensions 45
Diskette 22
write-protection 22
Display, cleaning 8
Disposal 4
Drive 33
Drive cover 15
Drive, hard disk drive, installing 35
E
Earphone 11
Electrical data 45
Electromagnetic compatibility 5
Energy saving 4
Enter key 21
Environmental conditions 46
Environmental data 46
Ergonomic, video workstation 10
Errordate 27
floppy 27
mouse 27
screen 26
System unit 25
Index
A26361-K520-Z100-4-7619 49
time 27
Error message 27
ESD 3
Euro key 21
Expansion 29
External devices
connecting 10
ports 11
F
FCC statement 5
First time, switching on 17
Flashing power-on indicator 19
Floppy disk drive
changing 37
indicator 20
removing 36
Floppy disk, cannot be read or written 27
Function keys 20
G
Game port 11
Green, power-on indicator 19
Guarantee coupon booklet 9
H
Hard disk carrier
installing 40
removing 38
Hard disk drive
installing 35
replacing 38
Hard disk indicator 19
I
IDE drives 33
Important notes 3
Indicator
power-on indicator fails to light 25
remains blank 26
Indicators, on the PC 19
Installation opening, 2nd serial port 42
Installing
accessible drive 34
board 31
hard disk carrier 40
hard disk drive 38, 39
new Software 25
ventilation duct 44
Insufficient memory 28
Interfaces 11
Italics 1
Index
50 A26361-K520-Z100-4-7619
K
Kensington Lock 24
Key combination 21
Keyboard 20
cleaning 8
connecting 12
Keyboard port 11
Keys 21
L
LAN-port 11
Lead-sealing 24
Line in 11
Line out 11
Lithium battery 43
replacing 44
Lock 15
Locking, PC 15
M
Main memory 43
Main switch 16
Manuals, further 28
Manufacturer’s notes 4
Memory, upgrading 43
Menu key 21
Message indicator 19
Microphone jack 11
Monitor
connecting 13
transporting 7
Monitor port 11
Mouse
cleaning 8
connecting 12
error 27
Mouse port 11
N
New Installation, Software 25
No screen display 26
Noise level 45
Not enough memory 28
Notational conventions 1
Noteboards 3
CE certificate 5
disposal 4
energy saving 4
important 3
manufacturer 4
power cord selection 6
safety 3
Num Lock key 21
Index
A26361-K520-Z100-4-7619 51
Numeric keypad 20
O
ON/OFF switch 16, 21
Opening, system unit 29
Operation 9
Orange, power-on indicator 19
Other manuals 28
Overview
PC 1
preparing for use 9
P
Packing material 9
Parallel port 11
connecting devices 12
PC cabling 10
cannot boot 25
cleaning 8
closing 30
connecting 10
connecting to power voltage 14
indicators 19
locking 15
opening 29
ports 11
setting up 10
switching off 16, 18
switching on 16, 18
switching on for the first time 17
transporting 7
unlocking 15
Ports, external devices 11
Power cord selection 6
Power management 28
Power-on indicator 16, 19
dark 25
Preparation for use 9
Preparing for use, overview 9
Printer 11
Problems 25
Processor 43
replacing 43
Property protection 23
PS/2 mouse port 11
Q
Quiet Boot 26
R
Rated voltage, setting 14
Ready-to-operate 16
Recycling 4
Index
52 A26361-K520-Z100-4-7619
Reinstalling, hard disk contents 28
Removing
accessible drive 36
board 31
hard disk carrier 38
hard disk drive 39, 40
ventilation duct 43
Replacing
board 31
hard disk drive 38
lithium battery 44
Restoring, hard disk contents 28
Return key 21
S
Safety 3
Screen blank 17, 18, 26
Screen blanking 4
SCSI drives 33
SCSI port 11
Security function 24
Security functions
casing lock 23
Chipcard 23
MS-Windows 23
Security measures 23
Select, power cord 6
Serial port 11
connecting devices 12
Setting, rated voltage 14
Settings, BIOS Setup 23
Setup, see BIOS Setup
Shift key 21
Soft Power Off 18
Software, New Installation 25
Start key 21
Streamer
installing 34
removing 36
Summer time 27
Surface 45
Switching off, PC 16, 18
Switching on, PC 16, 18
Symbols, explanation of 1
System board, extensions 43
System expansion 29
System settings, BIOS Setup 23
System unit, see PC
T
Technical data 45
Time, not correct 27
Tips 25, 28
Transport 7
Index
A26361-K520-Z100-4-7619 53
Trouble
floppy 27
mouse 27
screen 26
System unit 25
Troubleshooting 25
U
Unlocking, PC 15
Unpacking 9
Upgrading, memory 43
USB, Universal Serial Bus 11
V
Ventilation area 46
Ventilation duct
installing 44
removing 43
VESA (DPMS) 4
Video workstation 10
W
Warm boot 21
Weight 45
Winter time 27
Write protection, floppy 22

Navigation menu