Samsung Electronics Co SLM4025NX Mono Laser Printer User Manual MagpieN english

Download:
Mirror Download [FCC.gov]
Document ID	2020637
Application ID	XTQKGc2eD5qvz+B+Uk+elA==
Document Description	Users Manual 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	483.61kB (6045097 bits)
Date Submitted	2013-07-19 00:00:00
Date Available	2013-07-19 00:00:00
Creation Date	2017-10-26 14:12:22
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-26 14:12:22
Document Title	MagpieN_english.book
Document Creator	FrameMaker 8.0
Document Author:	euni.ryu

Tips for moving & storing your machine
•
When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to
the machine or reduce print quality.
•
When moving the machine, make sure at least two people are holding the machine securely.
3. Maintenance
87
4. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
• Tips for avoiding paper jams
89
• Clearing paper jams
90
• Understanding the status LED
102
• Understanding display messages
105
This chapter gives helpful information for what to do if you encounter an error. If your machine
has a display screen, check the message on the display screen first to solve the error.
If you cannot find a solution to your problem in this chapter, refer to the Troubleshooting
chapter in the Advanced Guide (see "Troubleshooting" on page 255).
If you cannot find a solution in the User's Guide or the problem persists, call for service.
Tips for avoiding paper jams
By selecting the correct medias, most paper jams can be avoided. To avoid paper jams, refer to the following guidelines:
•
Ensure that the adjustable guides are positioned correctly (see "Tray overview" on page 39).
•
Do not remove paper from the tray while your machine is printing.
•
Flex, fan, and straighten paper before loading.
•
Do not use creased, damp, or highly curled paper.
•
Do not mix papers in a tray.
•
Use only recommended print media (see "Print media specifications" on page 113).
4. Troubleshooting
89
Clearing paper jams
To avoid tearing the paper, pull the jammed paper out slowly and gently.
In tray 1
Click this link to open an animation about clearing a jam.
Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
4. Troubleshooting
90
Clearing paper jams
In optional tray
Click this link to open an animation about clearing a jam.
4. Troubleshooting
91
Clearing paper jams
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting
92
Clearing paper jams
In the manual feeder/multi-purpose tray
M332xND/M382xD series
Click this link to open an animation about clearing a jam.
4. Troubleshooting
93
Clearing paper jams
M382xND/M382xDW/M402xND series
Click this link to open an animation about clearing a jam.
4. Troubleshooting
94
Clearing paper jams
Inside the machine
The fuser area is hot. Take care when removing paper from the machine.
4. Troubleshooting
95
Clearing paper jams
M3320/M3820/M4020 series
Click this link to open an animation about clearing a jam.
4. Troubleshooting
96
Clearing paper jams
M3325/M3825/M4025 series
Click this link to open an animation about clearing a jam.
4. Troubleshooting
97
Clearing paper jams
In exit area
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the machine.
4. Troubleshooting
98
Clearing paper jams
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting
99
Clearing paper jams
In the duplex unit area
Click this link to open an animation about clearing a jam.
4. Troubleshooting
100
Clearing paper jams
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting
101
Understanding the status LED
The color of the LED indicates the machine's current status.
• Some LEDs may not be available depending on model or country (see "Control panel overview" on page 23).
• To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Understanding display messages" on page 105).
• You also can resolve the error with the guideline from the computers’s Samsung Printing Status program window (see "Using Samsung Printer Status" on page
243).
• If the problem persists, call a service representative.
4. Troubleshooting
102
Understanding the status LED
LED
Status
Off
Description
The machine is off-line.
Blinking
When the backlight blinks, the machine is receiving or printing data.
On
• The machine is on-line and can be used.
Green
• A minor error has occurred and the machine is waiting for the error to be cleared. For models that supports display screen on
the control panel, check the display message. When the problem is cleared, the machine resumes.
Blinking
• Small amount of toner is left in the cartridge. The estimated cartridge lifea of toner is close. Prepare a new cartridge for
replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on
page 68).b
Status
• A toner cartridge has almost reached its estimated cartridge lifea. It is recommended to replace the toner cartridge (see
"Replacing the toner cartridge" on page 70).
Red
• The cover is opened. Close the cover.
On
• There is no paper in the tray when receiving or printing data. Load paper in the tray.
• The machine has stopped due to a major error. Check the display message (see "Understanding display messages" on page
105).
• A paper jam has occurred (see "Clearing paper jams" on page 90).
• An imaging unit has almost reached it’s estimated cartridge lifec. It is recommended to replace the toner cartridge.
) WPSb
Power
Blue
Blinking
The machine is attempting to connect to a wireless network.
On
The machine is connected to a wireless network (see "Wireless network setup" on page 156).
Off
The machine is disconnected from a wireless network.
On
The machine is in power save mode.
Off
The machine is in ready mode or machine’s power is off.
Blue
4. Troubleshooting
103
Understanding the status LED
LED
Eco
Status
Description
On
Eco mode is on (see "Eco printing" on page 53).
Off
Eco mode is off.
Green
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19798. The number of pages
may be affected by operating environment, percentage of image area, printing interval, graphics, media and media size. Some amount of toner may remain in the cartridge even when red LED
is on and the printer stops printing.
b. Some LEDs may not be available depending on model or country (see "Control panel overview" on page 23).
c. When the imaging unit has reached its end of life, the machine will stop printing. In this case, you can choose to stop or continue printing from the SyncThru™Web Service (Settings > Machine
Settings > System > Setup > Supplies Management> Imaging Unit Stop) or Samsung Easy Printer Manager (Device Settings > System > Supplies Management > Imaging Unit Stop).
Turning off this option and continuing to print may damage the device’s system.
4. Troubleshooting
104
Understanding display messages
Messages appear on the control panel display to indicate the machine’s status
or errors. Refer to the tables below to understand the messages’ and their
meaning, and correct the problem, if necessary.
Message
Paper jam
inside of duplex
• You can resolve the error with the guideline from the computers’s
Printing Status program window (see "Using Samsung Printer Status" on
page 243).
Paper jam
Meaning
Suggested solutions
Paper has jammed during
duplex printing. This is
applicable only to
machines with this feature.
Clear the jam (see "In
the duplex unit area"
on page 100).
Paper has jammed in inside
the machine.
Clear the jam (see
"Inside the machine"
on page 95).
• If a message is not in the table, reboot the power and try the printing job
again. If the problem persists, call a service representative.
inside machine
• When you call for service, provide the service representative with the
contents of display message.
Paper jam in tray1
Paper has jammed in the
tray.
Clear the jam (see "In
tray 1" on page 90).
Paper jam in tray 2
Paper has jammed in the
optional tray.
Clear the jam (see "In
optional tray" on page
91).
Paper jam in MP tray
Paper has jammed in the
multi-purpose tray.
Clear the jam (see "In
the manual feeder/
multi-purpose tray" on
page 93).
• Some messages may not appear on the display depending on the
options or models.
• [error number] indicates the error number.
• [tray type] indicates the tray number.
• [media type] indicates the media type.
• [media size] indicates the media size.
Paper Jam-related messages
Message
Paper jam
in exit area
Meaning
Paper has jammed in the
exit area.
Suggested solutions
Clear the jam (see "In
exit area" on page 98).
4. Troubleshooting
105
Understanding display messages
Toner-related messages
Message
Replace
new cartridge
Message
Install toner
Not Compatible
Toner cartridge
Prepare new
cartridge
Meaning
Suggested solutions
A toner cartridge is not Reinstall the toner cartridge.
installed.
A toner cartridge is not Reinstall the toner cartridge two or
being detected
three times to confirm it is seated
properly. If the problem persists,
contact the service representatives.
Not removed
Remove the protective film from the
protective film from
toner cartridge.
toner.
The indicated toner
Install the corresponding toner
cartridge is not
cartridge with a Samsung-genuine
suitable for your
cartridge (see "Replacing the toner
machine.
cartridge" on page 70).
Small amount of toner Prepare a new cartridge for a
is left in the indicated replacement. You may temporarily
increase the printing quality by
cartridge. The
redistributing the toner (see
estimated cartridge
life of toner is close. "Redistributing toner" on page 68).
Meaning
Suggested solutions
A toner cartridge has • You can choose Stop or Continue
as shown on the control panel. If
reached its estimated
you select Stop, the printer stops
cartridge lifea.
printing. If you select Continue, the
printer keeps printing but the
printing quality cannot be
guaranteed.
• Replace the toner cartridge for the
best print quality when this
message appears. Using a cartridge
beyond this stage can result in
printing quality issues (see
"Replacing the toner cartridge" on
page 70).
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates
the average capacity of print-outs and is designed pursuant to ISO/IEC 19798 (see "Available
consumables" on page 62). The number of pages may be affected by operating environment,
percentage of image area, printing interval, media, percentage of image area, and media size.
Some amount of toner may remain in the cartridge even when replace new cartridge appears
and the machine stops printing.
Samsung does not recommend using a non-genuine Samsung toner
cartridge such as refilled or remanufactured. Samsung cannot guarantee a
non-genuine Samsung toner cartridge's quality. Service or repair required
as a result of using non-genuine Samsung toner cartridges will not be
covered under the machine warranty.
4. Troubleshooting
106
Understanding display messages
Imaging unit-related messages
Message
Replace new
Image unit
Message
Not Installed
Imaging unit
Not compatible
Imaging unit
Prepare new
Image unit
Meaning
Suggested solutions
An imaging unit is not Reinstall the imaging unit.
installed.
An imaging unit is not Reinstall the imaging unit two or three
being detected
times to confirm it is seated properly. If
the problem persists, contact the
service representatives.
Not remove protective Remove the protective film from the
film from toner.
imaging unit.
The imaging unit is not Install the corresponding cartridge
suitable for your
with a Samsung-genuine cartridge
machine.
(see "Replacing the imaging unit" on
page 73).
Small amount of toner Prepare a new imaging unit for a
is left in the imaging replacement.
unit. The estimated
cartridge life of toner is
close.
Meaning
Suggested solutions
An imaging unit has • You can choose Stop or Continue
as shown on the control panel. If
reached its estimated
you select Stop, the printer stops
cartridge life.
printing. If you select Continue, the
printer keeps printing but the
printing quality cannot be
guaranteed.
• Replace the imaging unit for the
best print quality when this
message appears. Using a cartridge
beyond this stage can result in
printing quality issues (see
"Replacing the imaging unit" on
page 73).
• If the machine stops printing,
replace the imaging unit (see
"Replacing the imaging unit" on
page 73).
Samsung does not recommend using a non-genuine Samsung cartridge
such as refilled or remanufactured. Samsung cannot guarantee a nongenuine Samsung cartridge's quality. Service or repair required as a result of
using non-genuine Samsung cartridges will not be covered under the
machine warranty.
4. Troubleshooting
107
Understanding display messages
10
12
Tray-related messages
Message
Paper Empty
in [tray number]
Misc. messages
Meaning
Suggested solutions
There is no paper in the
indicated tray.
Load paper in the tray (see
"Loading paper in the tray"
on page 40).
Message
Door Open
Close the cover until it locks
into place.
Install toner
The toner cartridge is
installed improperly, or the
connector is polluted.
Reinstall the Samsunggenuine toner cartridge two
or three times to confirm it is
seated properly. If the
problem persists, please call
for service.
Error [error
number]
The machine unit cannot
be controlled.
Reboot the power and try the
printing job again. If the
problem persists, please call
for service.
The machine is in a room
with improper room
temperature.
Move the machine to a room
with proper room
temperature.
Close it
11
Message
Network Problem:
IP Conflict
802.1x
Network Error
Meaning
Suggested solutions
The IP address is used
elsewhere.
Check the IP address or
obtain a new IP address.
Fail to authenticate.
Check the network
authentication protocol. If
the problem persists,
contact your network
administrator.
Suggested solutions
The cover is not securely
latched.
Error [error
number]
Network-related messages
Meaning
Turn off then on
Error [error
number]
Call for service
Not proper room
temp. Move set
4. Troubleshooting
108
Understanding display messages
Message
Output bin Full
Meaning
The output tray is full.
Remove papers from the
output tray, the machine
resumes printing. If the
problem persists, call for
service.
The life of the fuser unit will
be expired soon.
Replace the fuser unit with a
new one. If the problem
persists, please call for
service.
Remove paper
Replace
Fuser Soon
Replace new
Suggested solutions
Fuser unit
The life of the fuser unit will
be expired.
• Replace new
Tray1 roller
The life of the tray pick-up
roller will expired soon.
• Replace new
Tray2 roller
The life of the tray pick-up
roller will expired.
Replace the tray pick-up roller
with a new one. If the
problem persists, please call
for service.
4. Troubleshooting
109
5. Appendix
This chapter provides product specifications and information concerning applicable regulations.
• Specifications
111
• Regulatory information
119
• Copyright
129
Specifications
General specifications
The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information.
Items
Dimension
Width x Length x Height
Description
• M332x/M382x/M402xND series: 366 x 365.6 x 262.5 mm (14.4 x 14.39 x 10.33 inches)
• M402xNX series: 366 x 365.6 x 281.2 mm (14.4 x 14.39 x 11.07 inches)
Weight
Machine with consumables
• M332xND/M382xD series: 9.86 kg (21.7 lbs)
• M382xND/M382xDW/M402xND series: 10.18 kg (22.4 lbs)
• M402xNX series:
Noise Levela
Ready mode
Less than 26 dB (A)
Print mode
• M332x series: Less than 55 dB (A)
• M382x/M402x series: Less than 57 dB (A)
Temperature
Humidity
Power ratingb
Operation
10 to 30 °C (50 to 86 °F)
Storage (packed)
-20 to 40 °C (-4 to 104 °F)
Operation
20 to 80% RH
Storage (packed)
10 to 90% RH
110 volt models
AC 110 - 127 V
220 volt models
AC 220 - 240 V
5. Appendix
111
Specifications
Items
Power consumption
Wirelessf
a.
b.
c.
d.
e.
f.
Description
Average operating mode
Less than 700 W
Ready mode
Less than 10 W
Power save mode c
Less than 1.1W (Wi-Fi Direct on: Less than 2.8 Wd)
Power off mode e
Less than 0.1 W
Module
SPW-B4319U
Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing.
See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine.
The power consumption of power save mode may be affected by machine's status, setting conditions, operating environment.
Wireless model only (see "Features by models" on page 8).
Power consumption can be completely avoided only when the power cable is not connected.
Wireless models only (see "Features by models" on page 8).
5. Appendix
112
Specifications
Print media specifications
Type
Size
Dimensions
Plain paper
Letter
Legal
US Folio
A4
Oficio
JIS B5
ISO B5
Executive
A5
A6
216 x 279 mm (8.5 x 11 inches)
216 x 356 mm (8.5 x 14 inches)
216 x 330 mm (8.5 x 13 inches)
210 x 297 mm (8.26 x 11.69 inches)
216 x 343 mm (8.5 x 13.5 inches)
182 x 257 mm (7.16 x 10.11 inches)
176 x 250 mm (6.93 x 9.84 inches)
184 x 267 mm (7.25 x 10.5 inches)
148 x 210 mm (5.82 x 8.26 inches)
105 x 148 mm (4.13 x 5.82 inches)
Envelope Monarch
Envelope No. 10
Envelope DL
Envelope C5
Envelope C6
Refer to the Plain
paper section
98 x 191 mm (3.87 x 7.5 inches)
105 x 241 mm (4.12 x 9.5 inches)
110 x 220 mm (4.33 x 8.66 inches)
162 x 229 mm (6.37 x 9.01 inches)
114 x 162 mm (4.48 x 6.38 inches)
Refer to the Plain paper section
Envelope
Thick paper
Thicker paper
Refer to the Plain
paper section
Refer to the Plain paper section
Thin paper
Refer to the Plain
paper section
Refer to the Plain paper section
Print media weight/Capacitya
Tray1 / Optional tray
Multi-purpose tray
Manual feederb c
70 to 85 g/m2 (19 to 24 lbs 70 to 85 g/m2 (19 to 24 lbs 70 to 85 g/m2 (19 to 24 lbs
bond)
bond)
bond)
• 250 sheets of 80 g/m2
(20 lbs bond)
• 50 sheets of 80 g/m2 (20 • 1 sheet of 80 g/m2 (20 lbs
lbs bond)
bond)
• 150 sheets of 75 g/m2
(20 lbs bond)
Not available in tray1/
optional tray.
75 to 90 g/m2 (20 to 24 lbs 75 to 90 g/m2 (20 to 24 lbs
bond)
bond)
86 to 105 g/m2 (23 to 28 lbs
bond)
Not available in tray1/
optional tray.
86 to 105 g/m2 (23 to 28 lbs 86 to 105 g/m2 (23 to 28 lbs
bond)
bond)
164 to 220 g/m2 (44 to 58
lbs bond)
164 to 220 g/m2 (44 to 58 lbs
bond)
60 to 70 g/m2 (16 to 19 lbs 60 to 70 g/m2 (16 to 19 lbs 60 to 70 g/m2 (16 to 19 lbs
bond)
bond)
bond)
5. Appendix
113
Specifications
Type
Size
Transparency
Letter, A4
Labelsd
Card stock
Bond paper
Refer to the Plain paper section
Letter, Legal, US Folio, Refer to the Plain paper section
A4, JIS B5, ISO B5,
Executive, A5
Letter, Legal, US Folio, Refer to the Plain paper section
A4, JIS B5, ISO B5,
Executive, A5
Refer to the Plain
Refer to the Plain paper section
paper section
Minimum size (custom)e, f
Maximum size (custom)
a.
b.
c.
d.
e.
f.
Dimensions
Print media weight/Capacitya
Tray1 / Optional tray
Multi-purpose tray
Manual feederb c
Not available in tray1/
138 to 146 g/m2 (36.81 to 138 to 146 g/m2 (36.81 to
optional tray.
38.91 lbs bond)
38.91 lbs bond)
Not available in tray1/
optional tray.
120 to 150 g/m2 (32 to 40
lbs bond)
120 to 150 g/m2 (32 to 40 lbs
bond)
121 to 163 g/m2 (32 to 43
lbs bond)
121 to 163 g/m2 (32 to 43
lbs bond)
121 to 163 g/m2 (32 to 43 lbs
bond)
106 to 120 g/m2 (28 to 32
lbs bond)
106 to 120 g/m2 (28 to 32
lbs bond)
106 to 120 g/m2 (28 to 32 lbs
bond)
• Multi-purpose(or manual
60 to 163 g/m2 (16 to 43 lbs bond)
feeder) tray: 76 x 127 mm (2.99 x
Not available in optional tray.
5 inches)
• Tray 1: 105 x 148.5 mm (4.13 x
5.85 inches)
216 x 356 mm (8.5 x 14 inches)
Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
M332xND/M382xD series only.
1 sheet for manual feeder.
The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness.
The paper types available in multi-purpose tray: Plan, Thick, Thicker, Thin, Cotton, Colored, Pre-printed, Recycled, Envelope, Transparency, Labels, Cardstock, Bond, Archive
The paper types available in tray 1: Plan, Thick, Thin, Recycled, Cardstock, Bond, Archive
5. Appendix
114
Specifications
System requirements
Microsoft® Windows®
Requirement (recommended)
Operating system
CPU
RAM
free HDD space
Windows® XP
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (256 MB)
1.5 GB
Windows Server® 2003
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (512 MB)
1.25 GB to 2 GB
Windows Server® 2008
Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz)
512 MB (2 GB)
10 GB
Windows Vista®
Intel® Pentium® IV 3 GHz
512 MB (1 GB)
15 GB
Windows® 7
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
1 GB (2 GB)
16 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
• DVD-R/W Drive
Windows Server® 2008 R2
Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster)
512 MB (2 GB)
10 GB
Windows® 8
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
1 GB (2 GB)
16 GB
• Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.
• Users who have administrator rights can install the software.
• Windows Terminal Services is compatible with your machine.
5. Appendix
115
Specifications
Mac
Requirements (Recommended)
Operating system
CPU
Mac OS X 10.5
• Intel® processors
RAM
Free HDD space
512 MB (1 GB)
1 GB
• 867 MHz or faster Power PC G4/G5
Mac OS X 10.6
• Intel® processors
1 GB (2 GB)
1 GB
Mac OS X 10.7 - 10.8
• Intel® processors
2 GB
4 GB
Linux
Items
Operating system
Requirements
Redhat® Enterprise Linux WS 4, 5, 6 (32/64 bit)
Fedora 5 ~ 15 (32/64 bit)
OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2, 11.3, 11.4 (32/64 bit)
Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04, 10.10, 11.04 (32/64 bit)
SuSE Linux Enterprise Desktop 10, 11 (32/64 bit)
Debian 4.0, 5.0, 6.0 (32/64 bit)
CPU
Pentium IV 2.4GHz (Intel Core™2)
RAM
512 MB (1 GB)
5. Appendix
116
Specifications
Items
Free HDD space
Requirements
1 GB (2 GB)
Unix
Items
Requirements
Sun Solaris 9, 10, 11 (x86, SPARC)
Operating system
HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)
IBM AIX 5.1, 5.2, 5.3, 5.4, 6.1, 7.1 (Power PC)
Free HDD space
Up to 100 MB
5. Appendix
117
Specifications
Network environment
Network and wireless models only (see "Features by models" on page 8).
You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the
machine.
Items
Network interface
Specifications
• Ethernet 10/100/1000 Base-TX Wired Lan
Network operating system
• 802.11b/g/n Wireless LAN
• Windows® XP, Windows Server® 2003, Windows Vista®, Windows® 7, Windows® 8, Windows
Server® 2008 R2
• Various Linux OS
• Mac OS X 10.5 -10.8
Network protocols
• UNIX OS
• TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD, AirPrint, Google Cloud Print
• SNMPv 1/2/3, HTTP, IPSec
Wireless security
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)
• Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)
• Encryption: WEP64, WEP128, TKIP, AES
5. Appendix
118
Regulatory information
This machine is designed for a normal work environment and certified with
several regulatory statements.
When using this product, these basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to persons:
Laser safety statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21
CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is
certified as a Class I laser product conforming to the requirements of IEC 608251 : 2007.
Class I laser products are not considered to be hazardous. The laser system and
printer are designed so there is never any human access to laser radiation above
a Class I level during normal operation, user maintenance or prescribed service
condition.
Warning
Never operate or service the printer with the protective cover removed from
laser/scanner assembly. The reflected beam, although invisible, can damage
your eyes.
5. Appendix
119
Regulatory information
Ozone safety
Recycling
This product’s ozone emission rate is under 0.1 ppm. Because
ozone is heavier than air, keep the product in a place with good
ventilation.
Recycle or dispose of the packaging material for this product in an
environmentally responsible manner.
Power saver
China only
This printer contains advanced energy conservation technology that
reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of
time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR program see http://
www.energystar.gov
For ENERGY STAR certified models, the ENRGY STAR label will be on
your machine. Check if your machine is ENERGY STAR certified.
5. Appendix
120
Regulatory information
10
Correct disposal of this product (Waste electrical &
electronic equipment)
(Applicable in countries with separate collection
systems)
(The United States of America only)
Dispose unwanted electronics through an approved recycler. To find the nearest
recycling location, go to our website: www.samsung.com/recyclingdirect Or
call, (877) 278 - 0799
11
State of California Proposition 65 Warning (US Only)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these
items from other s of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
12
Radio frequency emissions
FCC information to the user
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference
that may cause undesired operation.
5. Appendix
121
Regulatory information
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or experienced radio TV technician for help.
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
Canadian radio interference regulations
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and
Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la norme sur le
matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et
Sciences Canada.
13
United States of America
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. This section is only applicable if these devices are present.
Refer to the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the
United States of America if an FCC ID number is on the system label.
5. Appendix
122

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Print high-res
Author                          : euni.ryu
Create Date                     : 2013:07:18 18:48:44-04:00
Modify Date                     : 2013:07:18 18:52:30-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2013:07:18 18:52:30-04:00
Creator Tool                    : FrameMaker 8.0
Format                          : application/pdf
Title                           : MagpieN_english.book
Creator                         : euni.ryu
Document ID                     : uuid:01a76e29-5450-4111-86a0-86ca13a6fb50
Instance ID                     : uuid:854e4f50-fe59-4dd2-84ad-083a547f9a51
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Page Count                      : 36

EXIF Metadata provided by EXIF.tools