Sintai Optical CWFB124 Wi-Fi module User Manual 2 of 5

Sintai Optical (Shenzhen) Co., Ltd. Wi-Fi module 2 of 5

User Manual (2 of 5).pdf

41StationEnable image transmission and remote control by connecting the camera with a Wi-Fi access point created by your smart device.1. Enable the Wi-Fi access point of smart device.2. Select on camera and then press the button to confirm connection with smart device.StationWi-Fi ModeDevice1-SSIDDevice2-SSIDDevice3-SSIDSearching for devices.*SSID6FDQ%DFNPress the AC / CA button to select:• Scan: Search again surrounding wireless devices.• : Select the name of device to be connected.• Back: Back to previous page.3. Press the AC / CA button to select the name of smart device to be connected and then press the button to confirm. Then, the camera enters the password input interface.Type the network security keyEnter Password#!?ABCDEFGH IJKLMNOPQ RSTUVWXYZA/a4567 90123CancelSave Meanings of interface icons:Icon Description Delete the last letter$DSwitch the display of letters in capital and lowercase Move the Cursor#!? Switch the symbol inputInput Space
42Display of Wi-Fi Connection StatusThe Wi-Fi has successfully connected but APP is not enabled:Wi-Fi ModeConnected with device.3')GJJXKYY ^^ ^^ ^^AP modeDisconnectThe Wi-Fi has successfully connected and APP is enabled:Wi-Fi ModeConnected with APPXXXXXDisconnect4. Press the AC / CA / AC / CA buttons to select and then press the button to confirm your selection. Enter the completion of WPA2 PSK after password storage.5. Connect immediately after saving.• If connected, the LCD will display as shown below:StationWi-Fi ModeConnected with deviceSSID: XXXXXXXXDisconnect• If connect failed, please check Wi-Fi device and try again.6. After connection, click the icon of the APP on the smart device, you may use it to carry out relative operation.
43The Wi-Fi of smart device interrupts:Wi-Fi ModeDisconnected, please check Wi-Fi device and try again.AP modeBack• Back: Back to Wi-Fi mode SSID screen.For interrupting the connection:Wi-Fi ModeDisconnect from device?NoYes• No: Keep Wi-Fi connected and back to previous page.• Yes: Disconnect and back to Wi-Fi mode for interface connection.
44DSC deviceThe default name of DSC device is「KODAK PIXPRO AZ525」. Change the name of DSC device through key stroking.Name between 1-18 LettersKODAK PIXPRO AZ525CancelDSC deviceSave #!?ABCDEFGH IJKLMNOPQ RSTUVWXYZA/a4567 90123For the method of input, please refer to the introduction on password input on Page 41.MAC addressCheck the wireless MAC address of this camera.SettingsThe name of this camera can be changed through key stroking.1. Select and then press the button to enter the setting interface.2. Press the AC / CA button to select the option to be adjusted and then press the button to enter the menu.DSC deviceMAC addressKODAK PIXPRO AZ525386793XXXXXX3. Press the button to confirm settings and then skip the menu.
45Scene ModeThe user can select an appropriate mode from the 13 scene modes according to the type of environment you are shooting. The camera then configures the most appropriate settings automatically.1. Rotate the mode dial to select .2. Press the AC / CA / AC / CA buttons to select a scene, and press the button to confirm.Multi Exposure3. If any need of changing the scene, please press the button and then the button and finally the AC / CA / AC / CA buttons to reselect the scene.
46Handheld Night Reduce blur when shooting low light/ illuminated scenes.Quickly take 4 photos below 8M (including 8M) and then overlap as a clear night image.Pet Mode Rapidly identify pet (dog/cat), capture the dynamic moment of pet.When a cat /dog face is detected, a white focus frame appears. The camera will take a picture and save it regardless of whether the focus is successful (if successful, there appears a green focus frame; if not, there is an orange frame).At most, 10 dog/cat faces can be detected at one time.Sunset For sunsets. Capture subjects in strong sunlight.Fireworks For fireworks at night. Slow shutter speed adjusted for brilliant images.
47Multi Exposure Suitable for shooting moving objects (as many as 7) in the same background.Keep camera steady before shooting. Press and hold the Shutter button to take 7 photos continuously when it will stop automatically. To stop shooting, release the Shutter button in the midway.Objects shall be moved only from left to the right in order to be recorded. Objects moving from other directions would not be recorded.Shooting effect will be influenced if object is moving too fast or too close.Sport For fast-moving subjects. Capture sharp action shots without blur.Night Portrait For portraits against night time scenery (Suggest using tripod). Landscape Speed adjusted for brilliant images.
48Portrait For shooting portraitsSnow For subjects in the snow. Reduce underexposure.ChildrenFor kids and pets. Flash is disabled for eye protection.Party For subjects at night without using a tripod. Capture sharp shots without blur.Panorama Mode This feature allows you to capture a panoramic view that will have significantly more content than a single photograph. Follow the instruction arrow with a smooth and steady movement of the camera to seamlessly shoot an ultra-wide scene of up to 360 degrees.Follow the steps below:1. Select Panorama Mode ( ), and then press the button to confirm.2. Press the AC / CA / AC / CA buttons to select a shooting direction. (The right direction is used as default if you do not make any choice) 2 seconds later, the camera is ready to take pictures. You can also press the button or half press the Shutter button to be ready to take pictures.
493. Compose your shot on the LCD and half press the Shutter button to focus on the subject. After focusing, fully press the Shutter button down to take picture. At this time, the process dialog of panorama mode stitching appears on the screen. 4. Rotate the camera according to the set direction. When the range of rotation does not exceed the range that the camera can detect, the progress dialog along the indication arrow partially turns red. When it completely turns red, panorama mode shooting is finished.Panoramic image can be played back by the method of flash playing. Please see the animation panoramic playback on page 70.During shooting, the flash, self-timer, macro modes and exposure compensation are not available. Focus adjustment is also not available at this time.During panorama mode shooting, press the button to interrupt shooting and save the current pictures taken. Press the CA button to cancel shooting and not to save the previously taken pictures.During panorama mode shooting, when the moving direction of the camera is wrong or the angle deviates from the internal settings, the LCD shows a warning message「Improper alignment. Please try again.」and the current pictures taken are saved.
50Movie ModeUse this mode to record videos.Follow the steps below:1. Rotate the mode dial to select , and it will enter the movie screen.2. Press the button or the Shutter button to start recording.00:00:06x3.63. Press the button or the Shutter button again to stop recording, save it automatically and then the camera will return to the movie screen.In the recording process, you can rotate the zoom lever to zoom in or out of the subject.
51Settings under mode (unset state or state after reset):1. Rotate the mode dial to select , and then the camera enters the setting interface as shown below:Select one capture mode to define CS .Auto ModeSaveExit2. As shown in the picture, press the AC / CA button to select a capture mode that you want to define as and then press the button to enter the shooting screen.3. As shown in the picture, press the button to confirm setting or to exit without setting by turning the mode dial. Rotate the mode dial to skip .Go to setting CS mode.YesOrFor setting under other modes (use this method to select a different custom setting):1. Select any mode or scene mode to be stored.2. Set your desired parameters in the current mode.Custom SettingsThe user can store the frequently used shooting modes or scene modes and parameters and switch to this mode for quick adjustment.
52 5352Custom SettingsReset camera settings to custom settings mode.NoYes7. Rotate the mode dial to switch to .8. The photo settings you stored the last time are invoked.When the mode is used for the first time, there is no preset parameter stored in the mode.If you want to remove the parameter setting of「Custom Settings」, please utilize the reset function as described on page 97.3. Press the button and then the AC / CA button to select .4. Press the AC / CA button to select , and press the button or the CA button to enter the menu.5. Press the CA button to select 「Custom Settings」and then press the button or the CA button to enter the menu.Custom Settings6. Select「Ye s 」to save or「No」to cancel.
52 53Basic OperationUsing the Zoom FunctionYour camera is equipped with two types of zoom functions: Optical Zoom and Digital Zoom. Rotate the Zoom Lever of the camera to zoom in or out of the subject while taking pictures.Zoom LeverWhen the Optical Zoom reaches the threshold as Digital Zoom, release and turn the Zoom Lever to T to switch between the Optical zoom and Digital zoom.Zoom Indicator
54Focus SettingThis function can be adjusted in mode, please follow the steps below to configure the settings:1. Press the AC button to enter the Focus menu.Single-AF2. Press the AC / CA button to select the following 3 modes:• Single-AF The focus frame appears on the center of the LCD to focus on the subject.• Multi-AF The camera automatically focuses the subject in a wide area to find the focus point.• Object Tracking Smart tracking of the object in motion under the focusing shooting.3. Press the button to confirm the settings and exit the menu. Once enabled, Object Tracking will only work when lens is focused on the object.
55Macro ModeThe Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera.It can be adjusted in mode, please follow the steps below to configure the settings:1. Press the AC button to enter the Marco menu.Macro Off2. Press the AC / CA button to select the following 2 modes:• Macro Off Select this option to disable Macro.• Macro On Select this option to make focusing on the object closer to the lens (At the W side, the shooting distance should be more than 1 cm). 3. Press the button to confirm the settings and exit the menu.
56Self-timer SettingUsing this function can take photos at regular time. The camera can be set to shoot after 2 seconds, 10 seconds since pressing the Shutter button or shoot after smile.It can be adjusted in mode, please follow the steps below to configure the settings:1. Press the CA button to enter the Self-timer menu.Self-timer Off2. Press the AC / CA button to select the following 4 modes:• Self-timer Off Disables the Self-timer.• Self-timer 2 sec A single picture is shot 2 seconds after the Shutter button is pressed.• Self-timer 10 sec A single picture is shot 10 seconds after the Shutter button is pressed.• Self-timer Smile Press the Shutter button and a picture will be taken immediately after a smile is detected.3. Press the button to confirm the settings and exit the menu. When enabling the self-timer, pressing the Shutter button or the CA button can disable the self-timer and return to the shooting screen, and keep the self-timer setting.When enabling the smile detection, pressing the Shutter button or the button can disable the self-timer smile and return to the shooting screen, and keeping the self-timer smile setting.
57Flash ModeThe Flash is used to illuminate a subject in low light or for fill-in lighting to achieve better illumination of a subject with pronounced shadows.It can be adjusted in mode, please follow the steps below to configure the settings:1. Press the Flash Button to pop up the flash.212. Press the CA button to enter the Flash menu.଎ܠ昘旅ਘ⥺斿ҰForce Off3. Press the AC / CA button to select the following 6 modes:• Force Off Flash is turned off.• Flash Auto Camera flash goes off automatically based on existing light conditions.• Fill Flash The flash will engage with each shot even if there is enough available light to take the photo without flash.• Slow Sync. This allows for night scenery photos that include people in the foreground. (Suggest using tripod)• Slow Sync. + Red-Eye Use this mode for slow synchro shots with red-eye reduction.• Red-Eye Reduction The camera emits a brief pre-flash before the picture is taken to reduce red-eye effects.4. Press the button to confirm the settings and exit the option.
58White Balance SettingThe white balance function allows adjustment of the color temperature for different light sources. It can be adjusted in mode, please follow the steps below to configure the settings:1. Press button to enter the White Balance menu.଎ܠ昘旅AWBAWB2. Press the AC / CA button to select the following 8 modes:• AWB• Daylight• Cloudy• Fluorescent• Fluorescent CWF• Incandescent• Manual WB (Fully press the Shutter button to detect the white balance value)• Color Temp. (1900K~10000K) Press the AC / CA button to "Adjust the K value"; Press the AC button to exit the K value.3. Press the button to confirm the settings and exit the menu.
59Continuous ShotThis function can be adjusted in mode, please follow the steps below to configure the settings:1. Press the button to enter the Continuous Shot menu.Single2. Press the AC / CA button to select the following 5 modes:• Single Capture a single shot only.• Continuous Shot Take several pictures at a time.• Cont.Shot-High Speed (VGA) For continuous shot with VGA pixel.• Cont.Shot-Fast (4M) For continuous shot with 4M pixels.• Time-Lapse Take pictures based on the preset interval (30sec/ 1min/ 5min/ 10min).3. Press the button to confirm the settings and exit the menu. 4. Press the Shutter button to start continuous shooting. In Continuous Shot mode, the flash is automatically set to Force Off in order to achieve quick succession of shots.
60Please follow the steps below to configure the settings:1. Press the button to display the settings screen.2. Press the AC / CA button to select the setting options.3. Press the AC / CA button to adjust the option values.4. Press the button to complete the setting and enter shooting mode.Exposure CompensationSet up to adjust the picture brightness. In the case of a very high contrast between the photographed object and the background, the brightness of the picture can be appropriately adjusted. (Adjustable in Mode)1/50400 ISO1/50400 ISO0.3 EV0.3 EVF2.8F2.8The adjustable range of exposure value is from EV -3.0 to EV+3.0.EV SettingsThe EV function menu of the camera includes functions, such as EV adjustment, ISO adjustment, Shutter adjustment, Aperture adjustment, etc. Using the appropriate function settings can improve your pictures.

Navigation menu