Sintai Optical CWFB124 Wi-Fi module User Manual Part 9

Sintai Optical (Shenzhen) Co., Ltd. Wi-Fi module Part 9

User Manual Part 9.pdf

140 141
Share function
1. In the index playback interface of the
smart device, click to enter the
selection interface.
2. Select the les to be shared, and click
to pop up the share option.


4 item slected
Transmission procedure is determined
according to the settings of the smart
device.
Single Photo
• In the index playback interface, click one
to enter the single playback interface.
• Sliding around to browse around the les.
• Click one photo le and enter the index
playback interface, double click the photo
to enter 100% zoom picture, and double
click again to restore the original size.
142 143
1. Executable operations in single photo
playback of the les at the camera side:
File name
• : Enter the shooting status
• : Download the current le to the
smart device
• : Delete the current le
iOS system interface has one more
function than the Android system:
• / : start play / pause play
2. Executable operations in single photo
playback of the les on the smart device:
File name
• : Rotate the photo
• : Hare the current le directly to
social networks (set according to
the smart device)
• : Play back in the form of slide show
• : Process effects of the image of
picture le, and trim the video le
• : Delete the current le
142 143
Rotate
Select the photo le, click on The
le is directly saved automatically after
the rotation. The le is directly saved
automatically after the rotation.
File name File name
Edit function:
1. Editing photo les:
Click to enter the effect interface,
where lter effects, brightness adjustment
and modeling effects can be set.
• Filter effects:
The lter effects are divided into 23
types. More effect options can be
viewed by sliding the effect option bar
from side to side.
File name Effect
Effect option bar
144 145
• Brightness adjustment effects:
: Off
: Auto
• Modeling effects:
: Off
: Centering on dot
: Centering on strip (lateral direction)
First click to select your favourite effect,
and then click on to select 「save」,
upload to social networks options or
「cancel」.
2. Editing movie les:
Click to enter the trim interface.
Trim

Trim

 
• and : Play movies
• : Increase the number of frames
• : Shorten the number of frames
• : Trim starting point
• : Trim nishing point
144 145
Steps of movie trim:
1 Click or to start playing
movies.
2 Slide the quick browse bar from
side to side to choose the point you
need, according to the desired trim
accuracy of the movie, click or
to increase or shorten the number of
frames.
3 Slide the quick browse bar from side
to side so that the vertical line stays
on thumbnails needing to be cut, and
click to select the trim starting
point.
4 Slide the quick browse bar again to
the left so that the vertical line stays
on the thumbnails needing to be cut,
and click to select the trim nishing
point.
5 Click to select the 「save」,
upload to social networks options
or「cancel」.
About
Click “About” in the APP homepage to view
APP version and camera brand.
Click the link on screen to enter the website:
http://www.kodakcamera.jkiltd.com
146 147
146 147
Appendices
11
Camera Specications
Design and specications are subject to change without notice.
Type Digital Interchangeable Lens System Camera
Lens Mount Micro Four Thirds Mount
Sensor
Type 4/3 CMOS
Image
Sensor Size 17.3×13mm
Effective
Pixels 16.83 Megapixels
Anti-Handshake Sensor Shift
Number of
Recording
Pixels
Still Image
(4:3)
16MP: 4640×3480
10MP: 3648×2736
4MP: 2336×1752
3MP: 2048×1536
0.3MP: 640×480
(3:2)
14MP: 4608×3072
(16:9)
12MP: 4608×2592
2MP: 1920×1080
Movie
(FULL HD)
1920×1080, 30fps
(HD)
1280×720, 60fps
1280×720, 30fps
(VGA)
640×480, 30fps
High-Speed Movie: VGA(120fps)
146 147
146 147
Digital Zoom 2x, 4x
File System DCF 2.0, DPOF, Exif 2.3, PictBridge
File
Format
Still
Image JPEG (Fine, Standard), RAW, RAW+ JPEG (Fine)
Movie MOV (H.264), Audio: Linear PCM [Stereo]
Shooting Modes
Auto Scene, Program AE, Shutter priority, Aperture priority, Manual
Mode, Scene Mode [Panorama Mode, Handheld Night, Face
Beautier, Multi Exposure, Cat/Dog, Snow, Party, Sport, Night
Portrait, Portrait, Children, Landscape, Sunset, Fireworks], Wi-Fi,
Custom Settings
Scan Panorama Max. 360°
LCD Display 3.0inch (920k Pixels), Tilting
ISO Sensitivity Auto, ISO 200/400/800/1600/3200/6400/12800
Focus Modes Single AF, Continuous AF, Manual Focus,
Manual Focus + Single AF
Focusing Area
Selection
1-Area-Focusing, 25-Area-Focusing, Face Detection, Manual Area
Focusing
AE/AF Lock Yes
AF Assist Lamp Yes
148 149
Exposure Modes
Articial Intelligence AE (AiAE), Center-Weighted Average, Spot,
Multi-Spot, Face AE
Program AE (AE-Lock Available), Aperture Prior AE, Shutter
Prior AE, Manual
Metering Range EV 0~16 (F3.5,ISO200)
AE Bracket Manual:±3 Stops in 1/3 Stop Increments
AEB :±2 Stops in 1/3 Stop Increments
Exposure Compensation ±3EV in 1/3 Step Increments
Shutter Type Mechanical, Electronically-controlled, Focal-plane Shutter
Shutter Speed 1/4000 ~ 30 Seconds (Manual: 30 Minutes)
Continuous Shooting Approx. 5fps (Full Resolution)
Playback Modes Single Photo, Index (9/16Thumbnails), Date, Burst Shooting,
Zoom (Approx. ×2~×8) , Slide Show (Still/Movie/Still + Movie)
White Balance Control
AWB, Daylight, Cloudy, Shadow, Fluorescent, Fluorescent H,
Incandescent, Manual WB, Color Temperature Setting
(1900K ~10000K), WB Bracketing
148 149
Flash
Flash Method External
Flash Modes
Force Off, Force Flash, Flash Auto, Red-Eye Reduction,
Slow Sync., Slow Sync. + Red-Eye Reduction, Rear
curtain sync
Filter
Normal, Vivid, Black and White, Dreamy, Vignetting,
Ektachrome, Kodachrome, Kodacolor, Salon, Punk,
Negative, Reection, Sketch, Fish Eye, 4 Grids - Stylish, 4
Grids - Partial Color
Other
Features
Wi-Fi Support Yes (Build in Camera)
Multi-Language
Support 27 Languages
PC Interface USB 2.0
Jacks
TV Interface HDMI Type-D
Flash Attachment Hot Shoe
150 151
Eye-Fi Support Yes
Wi-Fi Yes (802.11 b/g/n)
Remote Viewnder Yes (via smartphone)
Power Rechargeable Li-ion Battery LB-070, 7.4V 1000mAh,
In-Camera Charging
Shooting Capability (Battery
Performance)
Approx. 410 Shots with SZ ED 12-45mm F3.5-6.3 AF Lens
(Based on CIPA Standards)
Operation Environment Temperature: 0 ~ 40℃, Humidity: 0 ~ 90%
Dimensions (W×H×D) Approx. 115.6×68.4×35.6mm (Based on CIPA Standards)
Weight Approx. 290g (Body Only)
150 151
Prompt and warning messages
Messages Description Reset mode
Warning! Battery
exhausted.
Warning before power off when the
camera battery is exhausted.
Displaying that it will
power off after 2 seconds.
Built-in memory error In the case of built-in memory error. Disappear after 2 seconds
and return to shooting
Warning! Do not turn
off the camera during
rmware upgrade.
Appear during upgrade of rmware.
Turn it off and remove the
message after completing
the upgrade.
Connection failed!
In the case of failing to connect to a
PC or a printer.
In the case of failing to connect to a
TV-system (including HDMI).
Remove transmission line
to stop connection, and
the message is removed.
Settings cannot be
changed under this
mode.
In the case of the setting items under
the shooting mode cannot be set
when pressing button Fn1/Fn2 or
independent function button.
Remove the message
after 2 seconds and back
to shooting.
Please re-install the
lens
The lens is not installed properly and it
cannot be started.
Do not reset, turn off
manually and reinstall the
lens.
152 153
Messages Description Reset mode
Beyond alignment.
Please shoot again.
In the case of overlarge joint offset in
the Panorama shooting.
Remove the message
after 2 seconds and back
to shooting.
This color effect
cannot be used in
video!
When electing Normal, Dreamy,
Vignetting, Kodacolor, Salon,
Reection, Sketch, Fish Eye and
4-Grids (Stylish / Partial Color) effects
under color effect, this restriction
description will be displayed below the
options.
Remain displaying below
the options without hiding.
Capture reached
maximum limit
In this capture ********
still size limited to
** M
When encountering the shooting
mode of limiting still size and
pressing the Fn1 / Fn2 button in the
case of setting the image size to Fn1 /
Fn2 button in the shooting mode.
Remove the message
after 2 seconds and back
to shooting.
152 153
Messages Description Reset mode
The lens is not
installed properly.
Please re-install the
lens.
The lens is not installed or not
installed properly and it cannot be
started.
Do not reset, turn off
manually and reinstall the
lens.
The Lens signal can
not be linked. Please
re-install the lens.
The lens has been installed, but the
lens cannot communicate after turning
the camera on.
Do not reset, turn off
manually and reinstall the
lens.
This Lens is not
supported.
Please conrm the
lens.
The lens has been installed, but it
does not push out when the camera is
turned on.
Push the lens out
manually. (In the case that
the lens has to be pushed
out manually)
Prevent writing to
memory card!
In the case that there is lock protection
for the card when saving the image.
Disappear after 2 seconds
and back to the previous
image.
154 155
Messages Description Reset mode
Card full!
In the case that the camera detects
the card capacity is insufcient when
turning on or pressing the shutter.
Disappear after 2 seconds
and back to the previous
image.
Memory full!
In the case that the camera detects
the memory capacity is insufcient
when turning on or pressing the
shutter.
Disappear after 2 seconds
and back to the previous
image.
Exceeded maximum
folder number.
When the folder number in the card
exceeds the maximum folder number
(999), the time for turning on and
reading will be too long, when it will
prompt the message until the reading
is completed.
The message will be
ended after the camera
processing is completed.
Card error! The card cannot be recognized after
being formatted. Normal display.
Card is not formatted!
When the card reading error occurs,
the message of not formatted will be
displayed subsequently.
Disappear after 2 seconds
and enter to the formatting
process.
154 155
Messages Description Reset mode
Slow access of the
card
When the card lower than Class
4 is recording movie above HD, it
may be accessed slowly and the
recording cannot be continued, and
the operation image may appear after
2 seconds (it may need to wait up to 9
seconds for the built-in memory).
Remove the message
after 2 seconds and back
to the shooting image.
Cannot write to SD
card
The recording cannot be continued if
there are problems which may cause
interruption of the recording during
writing to the card or recording in the
process of shooting or recording.
Disappear after 2 seconds
and back to the shooting.
No image!
When pressing the button there
is not any image in the camera or the
card.
Back to the shooting
image after 2 seconds.
Currently no
continuous group le
When it switches from playback mode
to Cont. playback mode, if there is not
any continuous group le in the les,
this prompt message will display.
Remove the message
after 2 seconds and back
to Thumbnail 3x3 mode.
No Red-Eye Detected!
No red-eye detected when pressing
for red-eye removing in playback
touch-up.
Disappear after 2 seconds
and back to the touch-up
menu.
156 157
Messages Description Reset mode
Too many pictures for
fast processing
The image may be unable to enter the
date playback if the image exceeds
the specication in the case of date
playback. (when the image number in
the card cannot exceed 5000)
Remove the message
after 2 seconds and back
to Thumbnail 3x3 mode.
Bad le or the le
cannot be recognized
When the format of the le viewed is
not supported or the le is damaged
and cannot be recognized properly.
This image message
only can be removed by
deleting the le.
Protected!
Undeletable!
This message will be displayed on the
image immediately when executing
delete action to the protected les.
Disappear after 2 seconds
and back to the previous
image.
This image cannot be
edited.
When pressing to play back the
bad les.
Remove the message
after 2 seconds and back
to the original image.
Cannot edit because
no face detected!
After no face image entering to the
touch-up menu.
Remove the message
after 2 seconds and back
to the menu.
156 157
Troubleshooting
Problem Possible causes Solution
Camera does not
turn on
The battery has been
depleted.
The battery is not inserted
correctly.
Recharge the battery.
Correctly reinstall the battery.
Camera turns off
suddenly during
operation
The battery has been
depleted.
Recharge the battery.
The picture is
blurred
Camera shakes while taking a
picture.
Turn on OIS feature.
Please use tripod for high
magnication (above 15X)
optical zoom.
Images and video
les cannot be
saved
The memory card is full.
The memory card is locked.
Use another memory card or
delete unnecessary les.
Unlock the memory card.
Images will not print
from the connected
printer
The camera is not connected
to the printer correctly.
The printer is not PictBridge
compatible.
The printer is out of paper or
ink.
The printer paper is jammed.
Check the connection
between the camera and
printer.
Use a PictBridge compatible
printer.
Load paper into the printer or
replace the ink cartridge in the
printer.
Remove the jammed paper.
158
Problem Possible causes Solution
Saving data to
memory card is slow
Using a memory card below
Class 4 may result in slower
recording times.
Use an memory card with write
Class higher than 4 to improve
performance.
Cannot write to the
memory card
The memory card has been
locked.
The camera may experience
trouble recording HD movies
to memory card with a rating
lower than Class 4.
Release the write lock of the
memory card or replace with
another card.
Use an memory card with write
Class higher than 4 to improve
performance.
Too many movies to
process
The number of pictures or
folders in the memory card
exceed the specications,
so the playback of data
folder can not be displayed.
Delete unwanted les.
Ver. 1
The Kodak trademark and trade dress are used
under license from Kodak.
© 2014 by JK Imaging Ltd. All rights reserved.
JK Imaging Ltd. 1411 W. 190th Street, Suite 550,
Gardena, CA 90248, USA
www.kodakcamera.jkiltd.com

Navigation menu