Yaesu Musen 20345X40 AMATEUR RADIO WITH SCANNING RECEIVER User Manual OM

Yaesu Musen Co., Ltd. AMATEUR RADIO WITH SCANNING RECEIVER OM

User Manual 6

61
Basic Operations
ReconfiguringtheSettings
The settings and memory of this radio can be returned to be default factory settings
when it was first shipped.
1 Press for one second or longer
The set-up menu will be displayed.
2 Touch [RESET/CLONE]
The menu list will be displayed.
The following resets can be selected.
[1FACTORYRESET]: This restores all settings to
the default settings when
shipped from the factory.
[4MEMCHRESET]: This erases only the registered
memory channels.
* Settings in the set-up menu
will not be erased.
[6APRSRESET]: This restores the APRS settings
to the default value when shipped
from the factory.
$#%-
$#%-
6:4:
5'672/'07
4'5'6
%.10'
%10(+)9Ჰ4'5
5%#0
&+52.#;
5+) 0#.+0)
#245 126+10
5&%#4&
/'/14;
&#6#
%#..5+) 0
3 Touch the item to be reset
The reset confirmation screen will be displayed.
$#%-
$#%-
4'5'6%.10'
Ჹ
Ჺ
᲻
᲼
(#%614;4'5'6
24'5'6
4'%#..24'5'6
/'/%*4'5'6
Ż
Ż
Ż
Ż
4 Touch [OK?]
The settings and memory will be reset and restored
to the default status when shipped from the factory
Tip Touch [Cancel] to stop the resetting.
$#%-
$#%-
᲻
᲼
4'%#..24'5'6
/'/%*4'5'6
Ż
Ż
%CPEGᲴ1-!
(#%614;4'5'6
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
62
Using the Memory
Frequently used frequencies and settings can be saved in the memory so that you can
quickly and conveniently operate on present channel. The radio is also equipped with
the following memory functions:
· Skips memory channels that you do not wish to receive during scanning ( P.77)
· Scans only the specified memory channels ( P.76)
· “Programmable Memory Scan (PMS)” that scans only the specified frequency range
(in the same frequency band) ( P.79)
The operating frequency and other operational information can be registered to each
regular memory channel, home channel, or PMS memory channel:
• Operating frequency • Memory tag • Repeater information
• Tone information • DCS information • Transmission power
• Memory skip information
(The operating mode information is not registered to the memory channels)
Writingtothememory
Tip
The information saved in the memory may be lost due to incorrect operation, static electricity or
electrical noise. Data may also be lost due to component failures and repairs. Make sure to write
down the information registered in the memories on a piece of paper or by using a micro-SD card.
A total of 500 channel memories each, can be used for Band A and Band B.
1 Switch to the VFO mode
2 Use to adjust the frequency to be written in the
memory
3 Press for one second or longer
The memory writing screen will be displayed.
The frequency will be automatically displayed in the
next empty memory channel.
Tip Refer to Steps 3 to 12 in “Naming a memory channel”
(P.66) when assigning a name to a memory channel.
4 Turn to select a different (if desired) memory
channel
Tip The memory channel can also be selected by touching it
directly.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
5 Press to save the data to memory
When the memory writing is completed, the
frequency and memory channel number will be
shown in the display.
Tips • The frequency that is already written in the memory can
also be overwritten by a new frequency.
• Touch [V/M] to return to the VFO mode.
Ჹ᲼ᲽᲹᲾᲸ
ᲸᲸᲺ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/8 53.
UsingtheMemory
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
63
Using the Memory
UsingtheMemory
Tips
• When shipped from the factory, the frequency in memory channel 1 of Band A is set to 144.000 MHz
while the frequency in memory channel 1 of Band B is set to 430.000 MHz. These can be changed
to other frequencies but cannot be erased.
• Names can also be assigned to the memory channels ( P.66).
• 9 pairs of PMS memory channels can be written for Band A and Band B each ( P.79).
Recallingthememory
1 Touch [V/M] to switch the mode
The memory channel last used will be shown in the
display.
Ჹ᲼ᲽᲹᲾᲸ
ᲸᲸᲺ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/8 53.
Ჹ᲼ᲽᲸᲸᲸ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/853.
8(1
2 Turn to select the memory channel
Touch [V/M] again to return to the VFO mode.
Tip
Non-registered memory channels will be skipped.
Ჹ᲼ᲽᲹᲾᲸ
ᲸᲸᲺ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/8 53.
Recallingthehomechannel
1 Press
The function menu will be displayed.
2 Switch the menu using [BACK] and [FWD]
Ჹ᲼ᲽᲾᲸᲸ
ᲹᲺ᳀;1-1*#/#
᲼᲻᲻ ᲹᲾᲸ
/76'
5%12'
/853.
8(1
5-+25'.
1((
&9
6Z294
*+
5%#0 4'8
(9&$#%-
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
64
Using the Memory
UsingtheMemory
3 Touch [HOME]
The home channel will be shown in the display.
Tip Change the frequency using to return to the VFO
mode.
Ჹ᲼ᲽᲾᲸᲸ
ᲹᲺ᳀;1-1*#/#
᲼᲻᲻ ᲹᲾᲸ
/76'
5%12'
/853.
8(1
(9&$#%-
$'#%10
6:
5.+56
.1)
/5)
$'#%10
*1/'
Touch [HOME] again to return to the VFO mode and
display the frequency that was selected before the
home channel was recalled.
Ჹ᲼ᲽᲾᲸᲸ
ᲹᲺ᳀;1-1*#/#
᲼᲻᲻ ᲸᲸᲸ
/76'
5%12'
/8 53.
*1/'
(9&$#%-
$'#%10
6:
5.+56
.1)
/5)
$'#%10
*1/'
Ჹ᲼ᲽᲾᲸᲸ
ᲹᲺ᳀;1-1*#/#
᲼᲻᲻ ᲹᲾᲸ
/76'
5%12'
/853.
8(1
(9&$#%-
$'#%10
6:
5.+56
.1)
/5)
$'#%10
*1/'
Tip
When shipped from the factory, the frequency in the home channel of Band A is set to 144.000 MHz
while the frequency in the home channel of Band B is set to 430.000 MHz.
Changingthefrequencyofthehomechannel
The default frequency setting of the home channel when shipped from the factory can
be changed.
1 Switch to the VFO mode
2 Adjust the frequency using
3 Press for one second or longer
The memory writing screen will be displayed.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
᲼Ჹ᲻ᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
4 Turn to select [HOME]
5 Press
The overwrite confirmation screen will be displayed.
᲼Ჹ᲻ᲽᲸᲾ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
65
Using the Memory
UsingtheMemory
6 Touch [OK?] to confirm and store the home channel
frequency
When the writing to the home channel is completed,
the updated home channel frequency will be
displayed.
Tip Touch [Cancel] to stop writing.
ᲾᲸ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/8 53.
Ჹ᲼Ჽ᲻
*1/'
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲾ᳀ᲸᲸ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
%CPEGᲴ1-!
18'494+6'
$#%-
$#%-
5-+2 5'.
1((
&'.&'.
Erasingthememory
1 Touch [V/M] for 2 to 3 seconds
The memory list will be displayed.
2 Turn to select the memory to be erased
Ჹ᲼ᲽᲸᲸᲸ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/8 53.
8(1
3 Touch [DEL]
The erase confirmation screen will be displayed.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
4 Touch [OK?] to confirm and delete the data
The memory will be erased, and the display will
become an empty field.
Tips • Touch [Cancel] to cancel the memory deletion.
• Repeat Steps 2 to 4 to erase additional memories.
Caution
Memory channel 1 and the home channel cannot be erased.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲾ᳀ᲸᲸ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
%CPEGᲴ1-!
&'.'6'
$#%-
$#%-
5-+2 5'.
1((
&'.&'.
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
66
Using the Memory
UsingtheMemory
Namingthememory
Names (memory tags) such as call signs and the names of the broadcasting stations
can be assigned to the memory channels and home channel.
Up to eight of the following characters can be entered as a memory tag.
• English letters (capital/small letters), numbers, symbols
Example:Assigninganamelike“YMGrp01”
1 Touch [V/M] for 2 to 3 seconds
The memory list will be displayed.
Ჹ᲼ᲽᲸᲸᲸ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/8 53.
8(1
2 Select the memory channel the name is going to be
assigned to
Tip Select the home channel when assigning a name to the
home channel.
3 Press for one second or longer
The character input screen will be displayed.
Tip Touch the memory channel or press for one second
or longer to display the character input screen.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
4 Touch [Caps] first, and then touch [Y] and [M]
[Caps] will turn orange, enabling capital letters to be
entered.
39'46;7+12
#5&()*,-.
<:%8$0/
#$%5RCEG
%CRU
'06
@
ᲹᲺ᲻
$#%-
᲼ᲺᲹ ᲹᲽᲸᲾᲸᲸ
5 Touch [Space]
6 Touch [G]
39'46;7+12
#5&()*,-.
<:%8$0/
#$%5RCEG
%CRU
'06
@
ᲹᲺ᲻
$#%-
᲼ᲺᲹ ᲹᲽᲸᲾᲸᲸ ;/
7 Touch [Caps] first, and then touch [R] and [P]
[Caps] will turn white, enabling lower case letters to
be entered.
39'46;7+12
#5&()*,-.
<:%8$0/
#$%5RCEG
'06
@
ᲹᲺ᲻
$#%-
%CRU
᲼ᲺᲹ ᲹᲽᲸᲾᲸᲸ ;/)
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
67
Using the Memory
UsingtheMemory
8 Touch [123]
The number and symbols input screen will be
displayed.
9 Touch [0] and then [1]
39'46;7+12
#5&()*,-.
<:%8$0/
#$%5RCEG
'06
@
ᲹᲺ᲻
$#%-
%CRU
᲼ᲺᲹ ᲹᲽᲸᲾᲸᲸ ;/)TR
10 Touch [ENT]
The name will be stored in memory and displayed on
the right side of the frequency.
ᲹᲺ
᲻᲼ᲽᲾ Ჿ ᳀᳁᳂
 "
#$% 5RCEG
'06
%CPEGᲴ
!
@
ᲹᲺ᲻
᲼ᲺᲹ ᲹᲽᲸᲾᲸᲸ ᳂Ჹ;/)TR
11 Touch [BACK]
The display will return to the previous screen.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
;/)TR᳂ Ჹ
$#%-
$#%-
5-+25'.
1((
&'.&'.
Changingthemethodofthememorytagdisplay
The method of displaying the frequency and name assigned to the memory can be
selected for each channel.
1 Switch to the memory mode
2 Select the memory channel that you want to change the memory tag display method
on
3 Press for one second or longer
The set-up menu will be displayed.
4 Touch [MEMORY]
The menu list will be displayed.
$#%-
$#%-
6:4:
5'672/'07
4'5'6
%.10'
%10(+)9Ჰ4'5
5%#0
&+52.#;
5+) 0#.+0)
#245 126+10
5&%#4&
/'/14;
&#6#
%#..5+) 0
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
68
Using the Memory
UsingtheMemory
5 Touch [1ALPHATAGSIZE] to select the memory
tag display size
The setting will switch between “SMALL” and
“LARGE” each time it is touched.
“SMALL”: Display the memory tag in small-sized
characters and the frequency in large-
sized characters.
“LARGE”: Display the memory tag in large-sized
characters and the frequency in small-
sized characters.
Tip Factory default value: LARGE
$#%-
$#%-
/'/14;
.#4)'Ჹ
Ჺ/'/5%#06;2'
#.2*#6#)5+<'
#../'/
6 Press for one second or longer
The size of the memory tag display will be set and the display will return to the
previous screen.
Tip The display method can also be changed by pressing for one second or longer in the
memory mode.
LARGE
;1-1*#/#
ᲹᲺ᳀Ჹ᲼ᲽᲾᲸᲸ
ᲽᲸᲸ61-;1Ჺ᲻
SMALL
Ჹ᲼ᲽᲾᲸᲸ
ᲹᲺ᳀;1-1*#/#
ᲽᲸᲸ61-;1Ჺ᲻
Splitmemory
Separate frequencies for transmit and receive can be registered for each memory
channel.
●Simultaneousregistration
1 Select the receive frequency in the VFO mode
2 Press for one second or longer
The memory writing screen will be displayed.
3 Press for one second or longer
The character input screen will be displayed.
Tip Refer to Steps 4 to 11 in “Naming a memory channel” (
P.66) when assigning a name to a memory channel.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
4 Touch [TXIN]
The number input screen will be displayed.
39'46;7+12
#5&()*,-.
<:%8$0/
#$% 5RCEG
%CRU
'06
@
ᲹᲺ᲻
$#%-
᲼ᲺᲹ ᲹᲽᲸᲾᲸᲸ
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40
69
Using the Memory
UsingtheMemory
5 Enter the transmit frequency
The entered frequency will be displayed on the right
side of [T] at the top of the screen.
ᲹᲺ᲻
᲼ᲽᲾ
Ჿ᳀᳁
᳂
#
$
%
&
5RCEG
'06
$#%-
ᲺᲸᲸ
᲼Ჹ ᲹᲽᲸᲾ
6 Touch [ENT]
The display will return to the memory writing screen.
ᲹᲺ᲻
᲼ᲽᲾ
Ჿ᳀᳁
᳂
#
$
%
&
5RCEG
'06
ᲸᲾ
᲼
Ჹ᲻ᲽᲸᲾ
ᲺᲸᲸ
᲼Ჹ ᲹᲽ
7 Turn to select the memory channel
Tip The memory channel can also be selected by touching it directly.
8 Press to save the transmit frequency
When the memory writing is completed, the receive frequency will be shown in the
display.
●Registeringtransmitfrequencyatalatertime
1 Touch [V/M] for 2 to 3 seconds
The memory list will be displayed.
Ჹ᲼ᲽᲸᲸᲸ
᲼᲻᲻ ᳀ᲾᲸ
ᲽᲸᲸ61-;1Ჺ᲻
/76'
5%12'
/8 53.
8(1
2 Select the memory channel whose transmit
frequency is to be registered
3 Press for one second or longer
The character input screen will be displayed.
Tips • Touch the memory channel or press for a second or
longer to display the character input screen.
• Refer to Steps 3 to 12 in “Naming a memory channel”
(P.66) when assigning a name to a memory channel.
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲸᲽᲸᲸ
᲼ᲹᲹᲽᲸᲾ
ᲹᲸᲸ
ᲺᲸᲸ
᲻ᲸᲸ
Ჸ᲼ᲸᲸ
$#%-
$#%-
5-+25'.
1((
&'.&'.
Application for FCC / IC
FCC ID: K6620345X40 / IC: 511B-20345X40

Navigation menu